Search NASA⌕ Search

SEARCH · Search NASA

Results for “statistical comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

A method to acquire CT organ dose map using OSL dosimeters and ATOM anthropomorphic phantoms

Purpose: To present the design and procedure of an experimental method for acquiring densely sampled organ dose map for CT applications, based on optically stimulated luminescence (OSL) dosimeters “nanoDots” and standard ATOM anthropomorphic phantoms; and to provide the results of applying the method—a dose data set with good statistics for the comparison with Monte Carlo simulation result in the future.Methods: A standard ATOM phantom has densely located holes (in 3 × 3 cm or 1.5 × 1.5 cm grids), which are too small (5 mm in diameter) to host many types of dosimeters, including the nanoDots. The authors modified the conventional way in which nanoDots are used, by removing the OSL disks from the holders before inserting them inside a standard ATOM phantom for dose measurements. The authors solved three technical difficulties introduced by this modification: (1) energy dependent dose calibration for raw OSL readings; (2) influence of the brief background exposure of OSL disks to dimmed room light; (3) correct pairing between the dose readings and measurement locations. The authors acquired 100 dose measurements at various positions in the phantom, which was scanned using a clinical chest protocol with both angular and z-axis tube current modulations.Results: Dose calibration was performed according to the beam qualities inside the phantom as determined from an established Monte Carlo model of the scanner. The influence of the brief exposure to dimmed room light was evaluated and deemed negligible. Pairing between the OSL readings and measurement locations was ensured by the experimental design. The organ doses measured for a routine adult chest scan protocol ranged from 9.4 to 18.8 mGy, depending on the composition, location, and surrounding anatomy of the organs. The dose distribution across different slices of the phantom strongly depended on the z-axis mA modulation. In the same slice, doses to the soft tissues other than the spinal cord demonstrated relatively small variations, with the maximum COV around 11.4%. This might be attributed to the angular mA modulation, the placement of the dosimeters, the chest cavity of the scanned region, and the size of the phantom. Doses to the spinal cord were consistently lower than those to other soft tissues.Conclusions: The method is suited for acquiring densely sampled organ dose maps, and can be used for studying dose distributions relevant to subject size, organ location, and clinical CT protocols.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-G-BRC-16: Theory and Clinical Implications of the Constant Dosimetric Leaf Gap (DLG) Approximation

Purpose: Commercial dose calculation algorithms incorporate a single DLG value for a given beam energy that is applied across an entire treatment field. However, the physical processes associated with beam generation and dose delivery suggest that the DLG is not constant. The aim of this study is to evaluate the variation of DLG among all leaf pairs, to quantify how this variation impacts delivered dose, and to establish a novel method to correct dose distributions calculated using the approximation of constant DLG. Methods: A 2D diode array was used to measure the DLG for all 60 leaf pairs at several points along each leaf pair travel direction. This approach was validated by comparison to DLG values measured at select points using a 0.6 cc ion chamber with the standard formalism. In-house software was developed to enable incorporation of position dependent DLG values into dose distribution optimization and calculation. The accuracy of beam delivery of both the corrected and uncorrected treatment plans was studied through gamma pass rate evaluation. A comparison of DVH statistics in corrected and uncorrected treatment plans was made. Results: The outer 20 MLC leaf pairs (1.0 cm width) have DLG values that are 0.32 mm (mean) to 0.65 mm (maximum) lower than the central leaf-pair. VMAT plans using a large number of 1 cm wide leaves were more accurately delivered (gamma pass rate increased by 5%) and dose coverage was higher (D100 increased by 3%) when the 2D DLG was modeled. Conclusion: Using a constant DLG value for a given beam energy will result in dose optimization, dose calculation and treatment delivery inaccuracies that become significant for treatment plans with high modulation complexity scores delivered with 1 cm wide leaves.

60 APPLIED LIFE SCIENCES↗

AI Model Benchmarking for Nonproliferation Applications: Steel Thread Benchmarking Task Force Technical Report (Rev. 2)

Steel Thread is a NA-22 venture that seeks to build trustworthy, reliable AI models that can be used in a wide variety of nonproliferation tasks. A key aspect of building these models is developing appropriate benchmarks and evaluation methods, which will enable the venture to identify and adapt models to provide the most value in the nonproliferation domain. Benchmarks must be relevant to key tasks in this domain, such as question answering, information retrieval, document summarization and classification, consensus analysis, and image and data analysis. This report 1) provides an overview of benchmark design, evaluation, and challenges; 2) reviews a variety of open benchmarks, with a focus on language models and tasks; and 3) identifies benchmarks that are most relevant to Steel Thread. This report is intended to serve as a basis for further efforts to classify and evaluate benchmarks and their correlation with success on nonproliferation-specific tasks. The Steel Thread venture has defined benchmarks to be a particular combination of a dataset (or datasets) and a metric (or metrics) conceptualized as representing one or more specific tasks or sets of abilities for a specific modality. It is adopted by a research community as a shared framework for comparing methods.1 It includes 1) Data: Labeled (a designated subset not used for training, which could be all the data), 2) Metric: A way to quantify performance, 3) Task/Ability: What the benchmark is testing, 4) Protocol: A structured and repeatable evaluation process, 5) Baseline/Reference Model: For comparison; could be statistical, rule-based, SME-derived, or another model, and 6) Maintenance Plan: to update with new information over time; important for long-term utility. For further clarity, the definition includes what a benchmark, in this context, is not. It is not a corpus of training data, specific to a model (it is intended to apply to a range of models), a universal evaluation of performance, a guarantee that the ‘top’ model on the leaderboard will be the best fit for every specific use case, an all-encompassing proof of a model’s universal quality, nor is it a one-size-fits-all measure of success. It does not cover every real-world constraint (like operational, ethical, or cost considerations), a systems integration test, or a unit test. This definition was inspired by and resulted from discussions within the Steel Thread Benchmarking Task Force. This group was formed to define what we would mean as a benchmark within Steel Thread but persisted as the need to develop a thorough understanding of the large and expanding existing benchmarking space. This technical report is a result of the group’s divide and conquer approach to exploring this space. The release of benchmarks might not be progressing as quickly as model development, but it is moving very fast, as many benchmarks quickly become saturated, when state-of-the-art models score so close to the benchmark’s ceiling that their results are virtually indistinguishable. At that point, the test no longer differentiates between new systems, so researchers usually stop reporting scores as the benchmark no longer informs about improvements from the next generation of models. In the OpenAI announcement of GPT-5, they reported results on six flagship public benchmarks (AIME 2025, SWE-bench Verified, Aider Polyglot, MMMU, HealthBench Hard, GPQA) but the full system-card covers roughly thirty-five separate evaluations, comprising hundreds of test task items in total. There have been some efforts to summarize benchmarks in specific fields, like for text-to-image generation, but these surveys have had a narrow methodology scope. Therefore, a comprehensive survey of all benchmarks or even all benchmarks that could be relevant to Steel Thread is outside of the scope of this report. We chose some specific benchmarks to investigate in detail.

97 MATHEMATICS AND COMPUTING↗

Drop Size Distribution Variability in Central Argentina during RELAMPAGO-CACTI

The Remote sensing of Electrification, Lightning, And Meso-scale/micro-scale Processes with Adaptive Ground Observations (RELAMPAGO) and the Cloud, Aerosol, and Complex Terrain Interactions Experiment Proposal (CACTI) field campaigns provided an unprecedented thirteen-disdrometer dataset in Central Argentina during the Intensive (IOP, 15 November to 15 December 2018) and Extended (EOP, 15 October 2018 to 30 April 2019) Observational Periods. The drop size distribution (DSD) parameters and their variability were analyzed across the region of interest, which was divided into three subregions characterized by the differing proximity to the Sierras de Córdoba (SDC), in order to assess the impact of complex terrain on the DSD parameters. A rigorous quality control of the data was first performed. The frequency distributions of DSD-derived parameters were analyzed, including the normalized intercept parameter (logN w ), the mean volume diameter (D 0 ), the mean mass diameter (D m ), the shape parameter (μ), the liquid water content (LWC), and the rain rate (R). The region closest to the SDC presented higher values of logN w , lower D 0 , and higher μ, while the opposite occurred in the farthest region, i.e., the concentration of small drops decreased while the concentration of bigger drops increased with the distance to the east of the SDC. Furthermore, the region closest to the SDC showed a bimodal distribution of D 0 : the lower values of D 0 were associated with higher values of logN w and were found more frequently during the afternoon, while the higher D 0 were associated with lower logN w and occurred more frequently during the night. The data were analyzed in comparison to the statistical analysis of Dolan et al. 2018 and sorted according to the classification proposed in the cited study. The logN w -D 0 and LWC-D 0 two-dimensional distributions allowed further discussion around the applicability of other mid-latitude and global precipitation classification schemes (startiform/convection) in the region of interest. Finally, three precipitation case studies were analyzed with supporting polarimetric radar data in order to relate the DSD characteristics to the precipitation type and the microphysical processes involved in each case.

54 ENVIRONMENTAL SCIENCES↗

Nauru Island Effect Detection Data Set

During Nauru99 it was noted that the island was producing small clouds that advected over the ARM site. The Nauru Island Effect Study was run for 1.5 years and the methodology developed to detect the occurrence. Nauru ACRF downwelling SW, wind direction, and air temperature data are used, along with downwelling SW data from Licor radiometers located on the southern end of the island near the airport landing strip. A statistical analysis and comparison of data from the two locations is used to detect the likely occurrence of an island influence on the Nauru ACRF site data

54 ENVIRONMENTAL SCIENCES↗

Results of the Balloon Atmospheric Propagation Experiment flights of 1970 (BAPE 1)

Two laser beams, one argon (5145 A) and one CO2 (10.6 microns), were propagated over vertical path from the ground to receivers located above the atmosphere, and the scintillation of the beams was measured. Simulataneous measurement of the state of turbulence along the path permitted the comparison of scintillation statistics with theory. The effects of atmospheric turbulence over a vertical or near-vertical path are discussed.

Minott, P. O.↗

The turbulence structure in the plane two-stream mixing layer.

Experimental data on the turbulent structure of free shear layers is examined in incompressible air streams. Both single-point and two-point data are used to examine the large coherent structure of the mixing layer. The use of spatial scales to define this large structure is explored. Application of these scales to modeling of free shear layers to show the similarity of such flows is demonstrated. Comparison of the statistical structure with observations from shadowgraph displays of plane shear layer flows shows good qualitative and quantitative agreement.

Jones, B. G.↗

The radial variation of corotating energetic particle streams in the inner and outer solar system

The radial gradient of long-lived, corotating energetic particle streams was measured using observations of .9-2.2 MeV protons from Helios 1 and 2, IMP 7, Pioneer 10 and Pioneer 11. A positive gradient of approximately 350% per AU is found between .3 AU and 1 AU. Between 1 AU and some 3-5 AU, the gradient is variable with an average value of 100% per AU which is consistent with earlier statistical results. A comparison between measurements at 9 AU and approximately 4 AU shows a negative gradient which is variable from -40 to -100% per AU. Possible solar latitudinal effects on these gradient studies are also discussed. Using solar wind and magnetic field data from Helios 1 between 1 AU and .3 AU, the relation between corotating energetic particle events in the inner solar system and the interplanetary medium is examined. It is found that the energetic particles are contained inside the high speed solar wind stream in a region adjacent to the interaction region between low speed and high speed streams.

Vanhollebeke, M. A. I.↗

Prediction and monitoring of clear air turbulence: An evaluation of the applicability of the rawinsonde system

The applicability of rawinsonde data for either detection or prediction of clear air turbulence is discussed. The mechanism currently believed responsible for the development of CAT is reviewed. Since previous studies determined that the most significant factor for the existence of turbulent layers is the magnitude of the vertical shear, certain theoretically derived shear criteria was applied to statistical and diagnostic comparisons of rawinsonde and Jimsphere/Jimsonde conjunctive vertical profiles. It is determined that the Rawinsonde system cannot reliably be used as a CAT detector in a single-station sense.

Keller, J. L.↗

Variable X-ray spectra of BL Lac objects: HEAO-1 observations of PKS 0548-322 and 2A 1219+305

X-ray spectra for the BL Lac objects PKS 0548-322 and 2A 1219+305 measured with the HEAO-1 A2 detectors during pointing maneuvers on September 30, 1978 and May 31, 1978 respectively are presented. Both fit single power law components with low energy absorption. For 2A 1219+305, a thermal bremsstrahlung form gives an unacceptable fit. From a comparison with other statistically poorer observations taken at 6 month intervals while the satellite was in its normal scanning mode, it is found that the sources exhibit spectral variability. A summary of measurements of the 5 BL Lac objects detected with the A2 experiment is presented and it is concluded that X-ray spectral changes in this class of source are common. Their general X-ray spectral characteristics distinguish BL Lac objects from other classes of X-ray emitting active galactic nuclei. Analysis of their total spectra indicates that most of the energy is emitted in the 5 to 100 eV band.

Worrall, D. M.↗

Ganymede - A relationship between thermal history and crater statistics

An approach for factoring the effects of a planetary thermal history into a predicted set of crater statistics for an icy satellite is developed and forms the basis for subsequent data inversion studies. The key parameter is a thermal evolution-dependent critical time for which craters of a particular size forming earlier do not contribute to present-day statistics. An example is given for the satellite Ganymede and the effect of the thermal history is easily seen in the resulting predicted crater statistics. A preliminary comparison with the data, subject to the uncertainties in ice rheology and impact flux history, suggests a surface age of 3.8 x 10 to the 9th years and a radionuclide abundance of 0.3 times the chondritic value.

Phillips, R. J.↗

A survey of the plasma electron environment of Jupiter - A view from Voyager

A survey of the plasma environment within Jupiter's bow shock is given in terms of the in situ calibrated electron plasma measurements made between 10 eV and 5.95 keV by the Voyager Plasma Science Experiment (PLS). The measurements are analyzed and corrected for spacecraft potential variations; the data are reduced to nearly model independent macroscopic parameters of the local electron density and temperature. The electron parameters are derived without reference to or internal calibration from the positive ion measurements made in the PLS experiment. Extensive statistical and direct comparisons with other determinations of the local plasma charge density indicate clearly that the analysis procedures have successfully and routinely discriminated between spacecraft sheath and ambient plasmas.

Scudder, J. D.↗

Active controllers and the time duration to learn a task

An active controller was used to help train naive subjects involved in a compensatory tracking task. The controller is called active in this context because it moves the subject's hand in a direction to improve tracking. It is of interest here to question whether the active controller helps the subject to learn a task more rapidly than the passive controller. Six subjects, inexperienced to compensatory tracking, were run to asymptote root mean square error tracking levels with an active controller or a passive controller. The time required to learn the task was defined several different ways. The results of the different measures of learning were examined across pools of subjects and across controllers using statistical tests. The comparison between the active controller and the passive controller as to their ability to accelerate the learning process as well as reduce levels of asymptotic tracking error is reported here.

Repperger, D. W.↗

The moments of inertia of Mars

The mean moment of inertia of Mars is, at present, very poorly constrained. The generally accepted value of 0.365 M(R-squared) is obtained by assuming that the observed second degree gravity field can be decomposed into a hydrostatic oblate spheroid and a nonhydrostatic prolate spheroid with an equatorial axis of symmetry. An alternative decomposition is advocated in the present analysis. If the nonhydrostatic component is a maximally triaxial ellipsoid (intermediate moment exactly midway between greatest and least), the hydrostatic component is consistent with a mean moment of 0.345 M(R-squared). The plausibility of this decomposition is supported by statistical arguments and comparison with the earth, moon and Venus.

Bills, Bruce G.↗

Groups of galaxies in the Center for Astrophysics redshift survey

By applying the Huchra and Geller (1982) objective group identification algorithm to the Center for Astrophysics' redshift survey, a catalog of 128 groups with three or more members is extracted, and 92 of these are used as a statistical sample. A comparison of the distribution of group centers with the distribution of all galaxies in the survey indicates qualitatively that groups trace the large-scale structure of the region. The physical properties of groups may be related to the details of large-scale structure, and it is concluded that differences among group catalogs may be due to the properties of large-scale structures and their location relative to the survey limits.

Ramella, Massimo↗

Sea level variation

Published values for the long-term, global mean sea level rise determined from tide gauge records range from about one to three mm per year. The scatter of the estimates appears to arise largely from the use of data from gauges located at convergent tectonic plate boundaries where changes of land elevation give fictitious sea level trends, and the effects of large interdecadal and longer sea level variations on short (less than 50+ years) or sappy records. In addition, virtually all gauges undergo subsidence or uplift due to isostatic rebound from the last deglaciation at a rate comparable to or greater than the secular rise of sea level. Modeling rebound by the ICE-3G model of Tushingham and Peltier (1990) and avoiding tide gauge records in areas of converging tectonic plates produces a highly consistent set of long sea level records. A global set of 21 such stations in nine oceanic regions with an average record length of 76 years during the period 1880-1980 yields the global sea level rise value 1.8 mm/year +/- 0.1. Greenhouse warming scenarios commonly forecast an additional acceleration of global sea level in the next 5 or 6+ decades in the range 0.1-0.2 mm/yr2. Because of the large power at low frequencies in the sea level spectrum, very long tide gauge records (75 years minimum) have been examined for past apparent sea level acceleration. For the 80-year period 1905-1985, 23 essentially complete tide gauge records in 10 geographic groups are available for analysis. These yielded the apparent global acceleration -0.011 (+/- 0.012) mm/yr2. A larger, less uniform set of 37 records in the same 10 groups with 92 years average length covering the 141 years from 1850-1991 gave 0.001 (+/- 0.008) mm/yr2. Thus there is no evidence for an apparent acceleration in the past 100+ years that is significant either statistically, or in comparison to values associated with global warming. Unfortunately, the large interdecadal fluctuations of sea level severely affect estimates of global sea level acceleration for time spans of less than about 50 years. This means that tide gauges alone cannot serve as a reliable leading indicator of climate change in less than many decades. This time required can be significantly reduced if the interdecadal fluctuations of sea level can be understood in terms of their forcing mechanisms, and then removed from the tide gauge records.

Douglas, Bruce C.↗

Direct numerical simulation of turbulent flow over a backward-facing step

The objectives of this study are as follows: (1) to conduct a direct numerical simulation of turbulent backward facing step flow using inflow and outflow conditions; and (2) to provide data in the form of Reynolds stress budgets for Reynolds averaged modeling. The report presents the basic statistical data and comparisons with the concurrent experiments of Jovic and Driver and budgets of turbulent kinetic energy.

Le, Hung↗