Search NASA⌕ Search

SEARCH · Search NASA

Results for “structures analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Peripheral Substituents on Fe(II) Spin State in Complexes with Tridentate Schiff‐Base Ligands

Abstract Six Fe(II) complexes with substituted 6‐((quinoline‐8‐ylimino)methyl)phenolates (R 2 qsal) were synthesized. X‐ray crystal structure determination for [Fe(R 2 qsal) 2 ], where R=F ( 1 ), Cl ( 2 ), Br ( 3 ), I ( 4 ), CF 3 /H ( 5 ), or CN/H ( 6 ), revealed mononuclear complexes that crystallize either solvent‐free in case of 1 , 5 , and 6 or as CH 2 Cl 2 solvates in the case of 2 , 3 , and 4 . Complexes 1 – 4 , which contain π‐donating substituents, exhibit only high‐spin (HS) state, as shown by crystal structure analysis and magnetic measurements. In contrast, complexes 5 and 6 , which contain electron‐withdrawing substituents, exist in the low‐spin (LS) state at lower temperatures but exhibit crossover to the HS state above 300 K. Electronic structure calculations show a good correlation between the relative energies of the LS and HS states and the experimentally observed behavior.

Gakiya‐Teruya, Miguel↗
DOE OSTI2021

Application of electron backscatter diffraction techniques to quantify effects of aging on sub-grain and spatial heterogeneity in NMC cathodes

Identification and evaluation of structural heterogeneity in spent cathode materials is crucial to developing appropriate remediation strategies for novel recycling processes. Native heterogeneities may be exacerbated during the cell's operational lifetime, as sub-particle-scale variations induce anisotropic expansion and contraction upon cycling. Structural transformations resulting from repeated cycling and calendar aging predominantly occur at the secondary particle surface and at the grain boundaries (GBs) between primary particles. However, the diffusion and stress build up around and across GBs are poorly understood. In this study, electron backscatter diffraction (EBSD) is employed to track sub-grain lattice structure across a statistically relevant number of Li(Ni0.33Mn0.33Co0.33)O2 (NMC-111) particles. Specifically, differences in lattice misorientation – measured as the deviation from the grain's average orientation – are tracked as a function of position within the electrode (near current collector, middle, and near separator) and as a function of electrochemical cycling. Further, a novel method of structural analysis is developed, offering insight into sub-grain diffusion behavior by comparing lattice misorientation near the grain boundary versus in the grain bulk. The present results suggest that electrode-scale spatial heterogeneity in lattice structure is induced by initial manufacturing conditions, and that radial gradients in lattice misorientation evolve at the primary particle scale with repeated electrochemical cycling.

25 ENERGY STORAGE↗
DOE OSTI2022

Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn): High Chemical Flexibility Resulting in Good Nonlinear-Optical Properties

Seven acentric sulfides Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) were grown by a high-temperature salt flux method. The crystal structures of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) compounds were determined by single-crystal X-ray diffraction with the aid of solid-state NMR spectroscopy. The Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) compounds are isostructural and crystallize in the Ba 6 Ag 4 Sn 4 S 16 structure type. The Sn-containing compound exhibits high structural similarity to Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) with the presence of an interstitial atomic position partially occupied by Sn atoms. The chemical bonding characteristics of Ba 6 (Cu 2.9 Sn 0.4 )Sn 4 S 16 were understood with electron localization function calculations coupled with crystal orbital Hamilton population calculations. The Ba–S and Cu–S interactions are dominantly ionic, but the Sn–S interactions consist of strong covalent bonding characteristics in Ba 6 (Cu 2.9 Sn 0.4 )Sn 4 S 16 . The monovalent Cu atoms, mixed with certain metals with various oxidation states, significantly shift the optical properties of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) compounds. This results in a good balance between the second-harmonic-generation (SHG) response and laser damage threshold (LDT). Ba 6 (Cu 1.9 Zn 1.1 )Sn 4 S 16 possesses a high SHG response and a high LDT of 2.8 × AGS and 3 × AGS, respectively. Here, a density functional theory calculation revealed that CuS 4 and SnS 4 tetrahedra significantly contribute to the SHG response in Ba 6 (Cu 2 Mg)Sn 4 S 16 , which also confirmed that CuS 4 tetrahedra are crucial for the stability and optical properties of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) compounds revealed by electronic structure analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural deformation and host–guest properties of doubly-reduced cycloparaphenylenes, [ n ]CPPs 2– ( n = 6, 8, 10, and 12)

Chemical reduction of several cycloparaphenylenes (CPPs) ranging in size from [8]CPP to [12]CPP has been investigated with potassium metal in THF. The X-ray diffraction characterization of the resulting doubly-reduced [n]CPPs provided a unique series of carbon nanohoops with increasing dimensions and core flexibility for the first comprehensive structural analysis. The consequences of electron acquisition by a [n]CPP core have been analyzed in comparison with the neutral parents. The addition of two electrons to the cyclic carbon framework of [n]CPPs leads to the characteristic elliptic core distortion and facilitates the internal encapsulation of sizable cationic guests. Molecular and solid-state structure changes, alkali metal binding and unique size-dependent host abilities of the [n]CPP 2– series with n = 6–12 are discussed. This in-depth analysis opens new perspectives in supramolecular chemistry of [n]CPPs and promotes their applications in size-selective guest encapsulation and chemical separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultra-Structural Imaging Provides 3D Organization of 46 Chromosomes of a Human Lymphocyte Prophase Nucleus

Three dimensional (3D) ultra-structural imaging is an important tool for unraveling the organizational structure of individual chromosomes at various stages of the cell cycle. Performing hitherto uninvestigated ultra-structural analysis of the human genome at prophase, we used serial block-face scanning electron microscopy (SBFSEM) to understand chromosomal architectural organization within 3D nuclear space. Acquired images allowed us to segment, reconstruct, and extract quantitative 3D structural information about the prophase nucleus and the preserved, intact individual chromosomes within it. Our data demonstrate that each chromosome can be identified with its homolog and classified into respective cytogenetic groups. Thereby, we present the first 3D karyotype built from the compact axial structure seen on the core of all prophase chromosomes. The chromosomes display parallel-aligned sister chromatids with familiar chromosome morphologies with no crossovers. Furthermore, the spatial positions of all 46 chromosomes revealed a pattern showing a gene density-based correlation and a neighborhood map of individual chromosomes based on their relative spatial positioning. A comprehensive picture of 3D chromosomal organization at the nanometer level in a single human lymphocyte cell is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Pressure‐Induced Structural and Optoelectronic Modulations in 2D Dion‐Jacobson Hybrid Lead Iodide Perovskites With a Rigid Spacer

2D hybrid organic-inorganic perovskites (HOIPs) are known for their superior chemical and thermal stability over 3D variants, positioning them as promising materials for advanced optoelectronic applications. Applying external high pressure is an effective strategy to modify their structures and tune their optoelectronic properties. This study examines the high-pressure behavior of a Dion-Jacobson type 2D HOIP, DPDAPbI 4 , which incorporates the rigid organic spacer N,N-dimethylphenylene-p-diammonium (DPDA). Utilizing photoluminescence, UV–visible absorption, vibrational spectroscopy, and in situ synchrotron powder X-ray diffraction, an isostructural phase transition is identified near 1.5 GPa, marked by a notable shift in photoluminescence intensity linked to free exciton emission. Synchrotron X-ray diffraction reveals significant anisotropic compression along the c-axis, while structural analysis indicates the rare phenomenon of reduced lead-iodide octahedral distortion below 2 GPa, contrasting with the increased octahedral distortion reported in most previous studies on lead-based 2D HOIPs. Density functional theory calculations elucidate the structural origins and mechanisms driving the pressure-induced phase transition and optoelectronic tuning. These findings underscore the critical interplay between rigid organic spacers and inorganic octahedra in modulating high-pressure optoelectronic properties, offering valuable insights for designing future 2D HOIPs with tailored functionalities.

14 SOLAR ENERGY↗
DOE OSTI2023

Nucleation kinetics model for primary crystallization in Al–Y–Fe metallic glass

The high density of aluminum nanocrystals (>10 21 m -3 ) that develop during the primary crystallization in Al-based metallic glasses indicates a high nucleation rate (~10 18 m -3 s -1 ). Several studies have been advanced to account for the primary crystallization behavior, but none have been developed to completely describe the reaction kinetics. Recently, structural analysis by fluctuation electron microscopy has demonstrated the presence of the Al-like medium range order (MRO) regions as a spatial heterogeneity in as-spun Al 88 Y 7 Fe 5 metallic glass that is representative for the class of Al-based amorphous alloys that develop Al nanocrystals during primary crystallization. From the structural characterization, an MRO seeded nucleation configuration is established, whereby the Al nanocrystals are catalyzed by the MRO core to decrease the nucleation barrier. The MRO seeded nucleation model and the kinetic data from the delay time (τ) measurement provide a full accounting of the evolution of the Al nanocrystal density (N v ) during the primary crystallization under isothermal annealing treatments. Moreover, the calculated values of the steady state nucleation rates (J ss ) predicted by the nucleation model agree with the experimental results. Moreover, the model satisfies constraints on the structural, thermodynamic, and kinetic parameters, such as the critical nucleus size, the interface energy, and the volume-free energy driving force that are essential for a fully self-consistent nucleation kinetics analysis. In conclusion, the nucleation kinetics model can be applied more broadly to materials that are characterized by the presence of spatial heterogeneities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synaptonemal complex formation produces a particular arrangement of the lateral element-associated DNA

Highlights: • The NAMA-Ur method can be used to analyze the DNA associated to the synaptonemal complex. • The DNA associated to the synaptonemal complex display bubble-like organization. • Formation of the synaptonemal complex is enough to produce the bubble-like organization of the DNA. • Synaptonemal complex without lateral elements produce similar organization of its associated DNA. During meiosis, homologous chromosomes exchange genetic material. This exchange or meiotic recombination is mediated by a proteinaceous scaffold known as the Synaptonemal complex (SC). Any defects in its formation produce failures in meiotic recombination, chromosome segregation and meiosis completion. It has been proposed that DNA repair events that will be resolved by crossover between homologous chromosomes are predetermined by the SC. Hence, structural analysis of the organization of the DNA in the SC could shed light on the process of crossover interference. In this work, we employed an ultrastructural DNA staining technique on mouse testis and followed nuclei of pachytene cells. We observed structures organized similarly to the SCs stained with conventional techniques. These structures, presumably the DNA in the SCs, are delineating the edges of both lateral elements and no staining was observed between them. DNA in the LEs resembles two parallel tracks. However, a bubble-like staining pattern in certain regions of the SC was observed. Furthermore, this staining pattern is found in SCs formed between non-homologous chromosomes, in SCs formed between sister chromatids and in SCs without lateral elements, suggesting that this particular organization of the DNA is determined by the synapsis of the chromosomes despite their lack of homology or the presence of partially formed SCs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Broad Distribution of Local Polar States Generates Large Electrothermal Properties in Pb-Free Relaxor Ferroelectrics

Electrothermal energy conversion provides attractive solutions for global energy management, such as energy harvesting from waste heat using pyroelectric energy conversion (PEC) and efficient cooling of portable electronics or data servers using the electrocaloric effect. Relaxor ferroelectrics are attractive for electrothermal energy conversion because of their large pyroelectric coefficients over a wide temperature range. Although Pb-based relaxors are well-known, toxicity concerns have mandated the intense search for Pb-free alternatives. Here, we engineered (Ba,Ca)TiO 3 -based relaxors based on a multisite doping strategy, which show promising electrothermal performance, viz. a maximum PEC efficiency of 14% and electrocaloric refrigeration capacity of 115 J/kg. Using local-scale structural analysis, we provide an atomistic model for large electrothermal properties in the newly designed Pb-free ferroelectrics, whereby a temperature-independent continuous distribution of cation displacement directions creates easy pathways for microscopic polarization reorientation. This research provides key structural insight for future atomic-scale engineering of environmentally sustainable ferroelectrics in energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Crystal structure of Methanococcus jannaschii dihydroorotase with substrate bound

Here, we report the X-ray structural analysis of dihydroorotase from Methanococcus jannaschii co-crystallized with dihydroorotate at pH 6.5. The crystals are isomorphous with the crystals of the apoenzyme, with space group P3 2 21 and unit-cell dimensions a = b = 111.4, c = 101.2 Å. The structure was refined to R = 0.169 and R free = 0.186 at a resolution of 1.87 Å at room temperature. During crystallization the degradative reaction took place, and the electron density in the active site corresponds to the substrate carbamoyl aspartate. Carbamoyl aspartate interacts with the protein in the active site in a manner similar to that observed for Escherichia coli and human dihydroorotases. However, the flexible loop (residues 140–151) adopts both conformations in the crystal, loop-out and loop-in, with the loop-out conformation having higher occupancy. This contrasts with our expectations for the flexible loop to be exclusively in the loop-in conformation, which is the conformation that it adopts to stabilize the binding of the substrate in the known systems. Additional studies with substrate analogs that resemble carbamoyl aspartate and different crystallization conditions would provide further insight into the conformation of the flexible loop in this system.

Methanococcus jannaschii↗
DOE OSTI2024

Structural basis for inhibition of coagulation factor VIII reveals a shared antigenic hotspot on the C1 domain

Hemophilia A arises from dysfunctional or deficient coagulation factor (F)VIII and leads to inefficient fibrin clot formation and uncontrolled bleeding events. The development of antibody inhibitors is a clinical complication in hemophilia A patients receiving FVIII replacement therapy. LE2E9 is an anti-C1 domain inhibitor previously isolated from a mild/moderate hemophilia A patient and disrupts FVIII interactions with von Willebrand factor and FIXa, though the intermolecular contacts that underpin LE2E9-mediated FVIII neutralization are undefined. To determine the structure of the complex between FVIII and LE2E9 and characterize its mechanism of inhibition. FVIII was bound to the antigen binding fragment (Fab) of NB2E9, a recombinant construct of LE2E9, and its structure was determined by cryogenic electron microscopy. Here, this report communicates the 3.46 Å structure of FVIII bound to NB2E9, with its epitope comprising FVIII residues S2040 to Y2043, K2065 to W2070, and R2150 to H2155. Structural analysis reveals that the LE2E9 epitope overlaps with portions of the epitope for 2A9, a murine-derived inhibitor, suggesting that these residues represent a shared antigenic region on the C1 domain between FVIII –/– mice and hemophilia A patients. Furthermore, the FVIII:NB2E9 structure elucidates the orientation of the LE2E9 glycan, illustrating how the glycan sterically blocks interactions between the FVIII C1 domain and the von Willebrand factor D' domain. A putative model of the FVIIIa:FIXa complex suggests potential clashing between the NB2E9 glycan and FIXa light chain. These results describe an antigenic “hotspot” on the FVIII C1 domain and provide a structural basis for engineering FVIII replacement therapeutics with reduced antigenicity.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Eco-friendly, solution-processable and efficient low-energy lighting phosphors: copper halide based hybrid semiconductors Cu 4 X 6 (L) 2 (X = Br, I) composed of covalent, ionic and coordinate bonds

A series of copper halide based inorganic–organic hybrid semiconductors have been synthesized. Structural analysis confirms that all compounds are composed of one-dimensional Cu 4 X 6 2- anionic chains that coordinate to cationic ligands via Cu–N dative bonds. Different coordination affinities of the ligands lead to two types of ligand arrangements with various structural distortions. All compounds are highly resistant to heat and moisture as a result of the combination of coordinate and ionic bonds. Low energy emission with high efficiency is achieved for these compounds and the emission energy (~552–615 nm) and color (yellow-orange) can be tuned by varying the ligand and halogen element. The electronic structure and luminescence mechanism are examined by both experimental and theoretical methods. More importantly, all compounds demonstrate good solubility in polar aprotic solvents, a desired property that is absent in all other CuX hybrid families of extended structures, which is attributed primarily to the ionic nature of this material class. Furthermore, the good solution-processability, and cost effective and easily scalable synthesis coupled with high quantum efficiencies and framework stability make these hybrid materials promising phosphors for general lighting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A chiral switchable photovoltaic ferroelectric 1D perovskite

Spin and valley degrees of freedom in materials without inversion symmetry promise previously unknown device functionalities, such as spin-valleytronics. Control of material symmetry with electric fields (ferroelectricity), while breaking additional symmetries, including mirror symmetry, could yield phenomena where chirality, spin, valley, and crystal potential are strongly coupled. Here we report the synthesis of a halide perovskite semiconductor that is simultaneously photoferroelectricity switchable and chiral. Spectroscopic and structural analysis, and first-principles calculations, determine the material to be a previously unknown low-dimensional hybrid perovskite (R)-(-)-1-cyclohexylethylammonium/(S)-(+)-1 cyclohexylethylammonium) PbI 3 . Optical and electrical measurements characterize its semiconducting, ferroelectric, switchable pyroelectricity and switchable photoferroelectric properties. Temperature dependent structural, dielectric and transport measurements reveal a ferroelectric-paraelectric phase transition. Circular dichroism spectroscopy confirms its chirality. The development of a material with such a combination of these properties will facilitate the exploration of phenomena such as electric field and chiral enantiomer–dependent Rashba-Dresselhaus splitting and circular photogalvanic effects

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dominant heterocyclic composition of dissolved organic nitrogen in the ocean: A new paradigm for cycling and persistence

Marine dissolved organic nitrogen (DON) is one of the planet’s largest reservoirs of fixed N, which persists even in the N-limited oligotrophic surface ocean. The vast majority of the ocean’s total DON reservoir is refractory (RDON), primarily composed of low molecular weight (LMW) compounds in the subsurface and deep sea. However, the composition of this major N pool, as well as the reasons for its accumulation and persistence, are not understood. Past characterization of the analytically more tractable, but quantitatively minor, high molecular weight (HMW) DON fraction revealed a functionally simple amide-dominated composition. While extensive work in the past two decades has revealed enormous complexity and structural diversity in LMW dissolved organic carbon, no efforts have specifically targeted LMW nitrogenous molecules. Here, we report the first coupled isotopic and solid-state NMR structural analysis of LMW DON isolated throughout the water column in two ocean basins. Together these results provide a first view into the composition, potential sources, and cycling of this dominant portion of marine DON. Our data indicate that RDON is dominated by 15N-depleted heterocyclic-N structures, entirely distinct from previously characterized HMW material. This fundamentally new view of marine DON composition suggests an important structural control for RDON accumulation and persistence in the ocean. The mechanisms of production, cycling, and removal of these heterocyclic-N-containing compounds now represents a central challenge in our understanding of the ocean’s DON reservoir.

58 GEOSCIENCES↗
DOE OSTI2023

Role of spin-orbit coupling on crystal-field splitting and phase-stability of rare-earth based layered intermetallic

Layered and incommensurate heterostructures have attracted much attention for the occurrence of superconductivity and charge density waves with the possibility of intercalating foreign atoms. However, lanthanide-based heterostructures where (Eu x Sm 1-x )S and TaS 2 are alternatively stacked have been scarcely investigated. In this work, we performed phase stability, bonding behavior and electronic-structure analysis of (Eu x Sm 1-x )TaS 3 using first-principles density-functional theory methods. Our phase stability analysis suggests 50 at.% solubility of Eu in (Eu x Sm 1-x )TaS 3 compared to Eu solubility in all proportions in cubic SmS. The instability of Eu beyond 50 at.% in (Eu x Sm 1-x )TaS 3 was attributed to higher density of Eu-4f states at the Fermi-level. Based on band position calculated from spin-orbit coupling effect, we constructed a qualitative schematic of possible crystal-field analysis. The local change in bond-length and bond-angle around Eu-S in (Eu x Sm 1-x )TaS 3 correlate well with our crystal-field analysis. We believe that quantum mechanical insights provided in this work will be useful to understand other complex heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Developing new alkaline ceramics as possible CO 2 chemisorbents at high temperatures: The lithium and sodium yttriates (LiYO 2 and NaYO 2 ) cases

In this work, lithium and sodium yttriates (LiYO 2 and NaYO 2 ) were synthesized, characterized and tested as possible carbon dioxide (CO 2 ) captors. All the experimental syntheses and analyses were supported by the theoretical thermodynamic calculations, showing that both ceramics would be able to chemisorb CO 2 in a wide temperature range. Therefore, both ceramics were prepared by solid-state reaction and structurally characterized. In fact, the structural characterization evidenced that sodium atoms are located in a octahedral close-packed structure, while lithium ions are not so packed. The lithium ions are, indeed, in a highly distorted tetrahedron, tending to square-planar coordination. Then, based on the theoretical and structural analysis, LiYO 2 and NaYO 2 samples were investigated for the CO 2 capture process through dynamic and isothermal thermogravimetric experiments. All these experiments showed that LiYO 2 has better CO 2 capture properties than NaYO 2 , which was further correlated with the crystal structures of each ceramic. Furthermore, both ceramics presented similar CO 2 capture efficiencies regardless of the CO 2 concentration. Finally, LiYO 2 sample was tested for cyclic CO 2 chemisorption-desorption processes. The obtained results showed that the CO 2 capture efficiency is maintained high at least through 10 cycles. Therefore, these alkaline yttriates seem to present interesting alternatives as high and moderate temperature CO 2 captors, applicable for post-combustion industrial capture processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗