Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface contamination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Collection and review of metals data obtained from LDEF experiment specimens and support hardware

LDEF greatly extended the range of data available for metals exposed to the low-Earth-orbital environment. The effects of low-Earth-orbital exposure on metals include meteoroid and debris impacts, solar ultraviolet radiation, thermal cycling, cosmic rays, solar particles, and surface oxidation and contamination. This paper is limited to changes in surface composition and texture caused by oxidation and contamination. Surface property changes afford a means to study the environments (oxidation and contamination) as well as in-space stability of metal surfaces. We compare thermal-optical properties for bare aluminum and anodized aluminum clamps flown on LDEF. We also show that the silicon observed on the LDEF tray clamps and tray clamp bolt heads is not necessarily evidence of silicon contamination of LDEF from the shuttle. The paper concludes with a listing of LDEF reports that have been published thus far that contain significant findings concerning metals.

Bourassa, Roger↗
NASA NTRS1982

General contamination criteria for optical surfaces

Physical models are developed for establishing criteria to decide on the acceptable contamination level of optical devices in space-borne conditions. Optical systems can be degraded in terms of decreased throughput, i.e., transmissivity or reflectivity, or increases in the total integrated scatter (TIS). Performance losses can be caused by particulate accretion, molecular film accretion, and impact cratering. A quantitative relationship is defined for film thickness and loss of throughput. Formulas are also developed for cases where induced surface defects are larger than the desired viewing wavelengths, or smaller or of the same order of the observed wavelengths. The techniques are used to quantify the degradation of a VUV solar coronagraph, a VUV stellar telescope, and a solar cell due to TIS. Applications are projected for estimating the contamination sensitivity of specific instruments, assessing the contamination hazard from known particulates, or to define clean room standards.

Bremer, J. C.↗
NASA NTRS1972

Contamination threats to critical surfaces from handling and storage practices.

Review of the procedures and results of a program designed to remove the threat of sources of molecular and particulate contamination of critical optical, electrical, and mechanical elements in spacecraft. The results of recent contamination-probing thermal-vacuum tests indicate that some of the materials and practices commonly used to protect critical surfaces from molecular or particulate contamination can themselves represent significant threats. These contamination sources include clean-room and clean-tent materials, gloves, tissues, and covering or packaging materials. Mass and infrared spectral analyses of these materials and the environments and instruments exposed to them show that the contaminants are mostly plasticizers, slip or antistatic agents, and binders used in the manufacture of these products. Products of particular threat include vinyl gloves, boots, clean-tent walls, and some polyethylene sheets and bags. Techniques for reducing these threats are discussed.

Poehlmann, H. C.↗
NASA NTRS1980

Interactions of surfaces with the solar plasma

The induced environment is the main source of contamination on a spacecraft. The contamination of surfaces by volatile condensable material (VCM) present on spacecraft is being studied by many investigators both in the laboratory and space. In addition to VCM, the space environment is also a contributing factor in the contamination of surfaces. The effects of the interaction of the solar plasma with surfaces is examined. Plasma particles impact at energies in the multi-kilovolt range and penetrate and become trapped in surfaces. Results show that protons can penetrate up to 600 monolayers into surfaces and reach saturation concentrations of 6%.

Mckeown, D.↗
NASA NTRS1973

Removal of hydrocarbon contaminant film from spacecraft optical surfaces using a radiofrequency-excited oxygen plasma.

Results of a study on the feasibility of removing contaminant films from optical surfaces in vacuum, using an oxygen plasma, are discussed. Contaminant films were deposited onto optical surfaces from butadiene and methane gases at a pressure of about 4 torr in the presence of ultraviolet radiation. Optical surfaces evaluated included ultraviolet-reflecting mirrors, gratings, quartz disks, and spacecraft thermal control surfaces. In general, it was found that contaminants could be removed successfully from surfaces using an oxygen plasma. Exceptions were the white-paint thermal control surfaces, which, when contaminated, degraded further during exposure to the oxygen plasma.

Beverly, W. D.↗
NASA NTRS1995

Cleanliness evaluation of rough surfaces with diffuse IR reflectance

Contamination on bonding surfaces has been determined to be a primary cause for degraded bond strength in certain solid rocket motor bondlines. Hydrocarbon and silicone based organic contaminants that are airborne or directly introduced to a surface are a significant source of contamination. Diffuse infrared (IR) reflectance has historically been used as an effective technique for detection of organic contaminants, however, common laboratory methods involving the use of a Fourier transform IR spectrometer (FTIR) are impractical for inspecting the large bonding surface areas found on solid rocket motors. Optical methods involving the use of acousto-optic tunable filters and fixed bandpass optical filters are recommended for increased data acquisition speed. Testing and signal analysis methods are presented which provide for simultaneous measurement of contamination concentration and roughness level on rough metal surfaces contaminated with hydrocarbons.

Pearson, L. H.↗
NASA NTRS1973

Active cleaning technique device

The objective of this program was to develop a laboratory demonstration model of an active cleaning technique (ACT) device. The principle of this device is based primarily on the technique for removing contaminants from optical surfaces. This active cleaning technique involves exposing contaminated surfaces to a plasma containing atomic oxygen or combinations of other reactive gases. The ACT device laboratory demonstration model incorporates, in addition to plasma cleaning, the means to operate the device as an ion source for sputtering experiments. The overall ACT device includes a plasma generation tube, an ion accelerator, a gas supply system, a RF power supply and a high voltage dc power supply.

Shannon, R. L.↗
NASA NTRS1990

Surface accommodation of molecular contaminants

Theoretical consideration and supporting data are presented regarding the nature of the transport mechanisms which cause the adsorption of gases on spacecraft surfaces. Particular attention is given to the concept of a sticking coefficient which is the ratio of the thermally accommodated mass to the total incident mass. Existing molecular accommodation data are examined in terms of spacecraft applications and recent contamination-control data are introduced. Two distinct yet linked concepts emerge which are the accommodation and sticking coefficients, and surface roughness contributes significantly to both coefficients. A general equation regarding the coefficients is developed, and the data are found to fit the equation basically. It is concluded that a more precise characterization of the coefficients can be obtained through experimentation under simulated spacecraft conditions.

Chen, Philip T.↗
DOE OSTI2025

Nanomaterial-Engineered Surfaces for Decontamination of Water Resources

Aggregation-dependent shifts in plasmon frequency (colorimetric sensor); • Local refractive index-dependent shifts in plasmon frequency; • Inelastic (surface-enhanced Raman) light scattering; • Elastic (Rayleigh) light scattering CONCLUSIONS Generate unique classes of nanoscale materials for environmental stewardship applications o Characterization of nanomaterials provides understanding of structural properties for sorption of contaminants o Surface charge influences interaction between nanomaterial and contaminant o Surface charge can be modified to allow for more contaminant sorption • Demonstrate innovative nanomaterial science and technology solutions that meet our environmental stewardship needs: • Detect contaminants • Sequester contaminants

Murph, Simona E. [Savannah River National Laborato↗
NASA NTRS1991

Spectroscopy and multivariate analyses applications related to solid rocket nozzle bondline

Chemical composition and molecular orientation define the properties of materials. Information related to chemical composition and molecular configuration is obtained by various forms of spectroscopy. Software algorithms developed for multivariate analyses, expert systems, and Artificial Intelligence (AI) are used to conduct repetitive operations. The techniques are believed to be of particular significance toward achieving TQM objectives. The objective was to obtain information related to the quality of the bondline in the solid rocket motor, SRM, nozzle. Hysol 934 NA, a room temperature curing epoxide resin, is used as the bonding agent. A good bond requires that the adhesive be placed on a properly prepared metal surface, the adhesives Part A and B be mixed in appropriate ratio from material within shelf life specifications. Spectroscopic data was obtained for surfaces prepared according to specifications, contaminated metal surfaces, samples of the epoxide adhesive at times that represent shelf aging from 3 months to 2 years, several mix ratio of A to B, and curing material. Temperature was found to be a significant factor. The study concentrated on pot life and mix ratio.

Arendale, W. F.↗
NASA NTRS1993

Return flux contamination of an outgassing spacecraft in low earth orbit

The recontamination of a spacecraft surface directly exposed to the ram flux is investigated. It is assumed that the surface has been contaminated by a rocket plume contact and that, subsequent to the exposure, the contaminated surface is placed in the ram flux. A BGK-simulation was compared to both a Direct Simulation Monte Carlo (DSMC) and a Full Flow Monte Carlo (FFMC) using sensitivity analysis. Results indicate that the BGK-based simulation underpredicted the return flux contamination as compared to both the DSMC and FFMC techniques. Results from the full flow model suggest that the BGK model is inadequate to represent this physical problem.

Justiz, Charles R.↗
NASA NTRS2002

Use of FT-IR Analysis to Support Contamination Studies for Bonding Surfaces

The FT-IR analysis technique has become increasingly important for measuring and verifying coating levels on calibration standards and bonding specimens used to evaluate the effects of contamination on rocket motor bondlines. Use of this technique for evaluating solvent effectiveness for contamination removal is also increasing. Typical testing scenarios, analysis techniques and instrumentation used at MSFC will be described.

Boothe, Richard↗
NASA NTRS2003

Use of FT-IR Analysis to Support Contamination Studies for Bonding Surfaces

The FT-IR analysis technique has become increasingly important for measuring and verifying coating levels on calibration standards and bonding specimens used to evaluate the effects of contamination on rocket motor bondlines. Use of this technique for evaluating solvent effectiveness for contamination removal is also increasing. Typical testing scenarios, analysis techniques, and instrumentation used at MSFC will be described.

Boothe, Richard↗
NASA NTRS2009

Decontaminating Solar Wind Samples with the Genesis Ultra-Pure Water Megasonic Wafer Spin Cleaner

The Genesis sample return capsule, though broken during the landing impact, contained most of the shattered ultra-pure solar wind collectors comprised of silicon and other semiconductor wafers materials. Post-flight analysis revealed that all wafer fragments were littered with surface particle contamination from spacecraft debris as well as soil from the impact site. This particulate contamination interferes with some analyses of solar wind. In early 2005, the Genesis science team decided to investigate methods for removing the surface particle contamination prior to solar wind analysis.

Calaway, Michael J.↗
NASA NTRS1971

Device prepares aluminum surfaces for welding

Dry machining technique removes original surfaces to obtain contamination free welding surface. Device straddles edge being prepared and aligns with existing edges and adjacent surfaces of workpiece while sensing device regulates cut depth. Description of prototype is given.

Faulkner, G. E.↗
NASA NTRS1992

Control of on-orbit contamination for the Argos (P91-1) satellite

The ARGOS (P91-1) satellite presents a challenging combination of on-orbit contamination concerns while mandating a low-cost approach. Several experiment payloads contain contamination sensitive optics, another contains large quantities of CO2 and Xe for release in orbit, and one contains an NH3 fueled arc jet thruster. The latter includes a suite of sensors to measure contamination; so prelaunch calculations will be tested. Planned contamination control techniques include: physical separation of sensitive surfaces from contamination sources; flight covers to protect sensitive surfaces during early outgassing on-orbit; gas release and thruster operation early in the flight, before flight covers are opened; and careful control of plumes and venting through a detailed analysis of each.

Kelley, Joseph G.↗