Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Algorithm Stability and the Long-Term Geospace Data Record from TIMED/SABER

The ability of satellite instruments to accurately observe long-term changes in atmospheric temperature depends on many factors including the absolute accuracy of the measurement, the stability of the calibration of the instrument, the stability of the satellite orbit, and the stability of the numerical algorithm that produces the temperature data. We present an example of algorithm instability recently discovered in the temperature dataset from the SABER instrument on the NASA TIMED satellite. The instability resulted in derived temperatures that were substantially colder than anticipated from mid-December 2019 to mid-2022. This algorithm-induced change in temperature over one to two years corresponded to the expected change over several decades from increasing anthropogenic CO2. This paper highlights the importance of algorithm stability in developing Geospace Data Records (GDRs) for Earth’s mesosphere and lower thermosphere. A corrected version (Version 2.08) of the temperatures from SABER is described.

M G Mlynczak↗
DOE OSTI2019

A distributed temperature profiling method for assessing spatial variability in ground temperatures in a discontinuous permafrost region of Alaska

Soil temperature has been recognized as a property that strongly influences a myriad of hydro-biogeochemical processes and reflects how various properties modulate the soil thermal flux. In spite of its importance, our ability to acquire soil temperature data with high spatial and temporal resolution and coverage is limited because of the high cost of equipment, the difficulties of deployment, and the complexities of data management. Here we propose a new strategy that we call distributed temperature profiling (DTP) for improving the characterization and monitoring near-surface thermal properties through the use of an unprecedented number of laterally and vertically distributed temperature measurements. We developed a prototype DTP system, which consists of inexpensive, low-impact, low-power, and vertically resolved temperature probes that independently and autonomously record soil temperature. The DTP system concept was tested by moving sequentially the system across the landscape to identify near-surface permafrost distribution in a discontinuous permafrost environment near Nome, Alaska, during the summertime. Results show that the DTP system enabled successful acquisition of vertically resolved profiles of summer soil temperature over the top 0.8 m at numerous locations. DTP also enabled high-resolution identification and lateral delineation of near-surface permafrost locations from surrounding zones with no permafrost or deep permafrost table locations overlain by a perennially thawed layer. The DTP strategy overcomes some of the limitations associated with – and complements the strengths of – borehole-based soil temperature sensing as well as fiber-optic distributed temperature sensing (FO-DTS) approaches. Combining DTP data with co-located topographic and vegetation maps obtained using unmanned aerial vehicle (UAV) and electrical resistivity tomography (ERT) data allowed us to identify correspondences between surface and subsurface property distribution and in particular between topography, vegetation, shallow soil properties, and near-surface permafrost. Finally, the results highlight the considerable value of the newly developed DTP strategy for investigating the significant variability in and complexity of subsurface thermal and hydrological regimes in discontinuous permafrost regions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Use of satellite, surface, and aerological information for the calculation of thermal radiation fluxes

Data from the NOAA-9 satellite on cloud amount and cloud upper boundary temperature, data from surface weather stations, and results of aerological sounding of the atmosphere are used to calculate the vertical profiles of upward, downward, and effective fluxes of longwave radiation. A comparison of satellite and surface data on cloud amount and underlying surface temperature is presented.

Arking, A.↗
DOE OSTI2022

Variable wildfire impacts on the seasonal water temperatures of western US streams: A retrospective study

Recent increases in the burn area and severity of wildfires in the western US have raised concerns about the impact on stream water temperature–a key determinant of cold-water fish habitats. However, the effect on seasonal water temperatures of concern, including winter and summer, are not fully understood. In this study, we assessed the impact of wildfire burns at Boulder Creek (Oregon), Elk Creek (Oregon), and Gibbon River (Wyoming) watersheds on the downstream winter and summer water temperatures for the first three post-fire years. To obtain results independent of the choice of the analytical method, we evaluated the consequence of each burn using three different statistical approaches that utilize local water temperature data. Our results from the three approaches indicated that the response of water temperatures to wildfire burns varied across seasons and sites. Wildfire burns were associated with a median increase of up to 0.56°C (Standard Error; S.E. < 0.23°C) in the summer mean water temperatures (MWT) and 62 degree-day Celsius (DDC; S.E. < 20.7 DDC) in the summer accumulated degree days (ADD) for the three subsequent years across studied stream sites. Interestingly, these burns also corresponded to a median decrease of up to 0.49°C (S.E. < 0.45°C) in the winter MWT and 39 DDC (S.E. < 40.5 DDC) in the winter ADD for the same period across sites. Wildfire effects on the downstream water temperatures diminished with increasing site distance from the burn perimeter. Our analyses demonstrated that analytical methods that utilize local watershed data could be applied to evaluate fire effects on downstream water temperatures.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Prediction of annual soil respiration from its flux at mean annual temperature

Accurately scaling soil respiration (SR, the soil-to-atmosphere flow of CO2) across time and space is important to constrain and understand ecosystem to global scale SR, a major terrestrial carbon flux to the atmosphere. Year-round SR measurements are however expensive and sometimes impossible to perform. Bahn et al. (2010) developed an approach to estimate annual SR (SRannual) from the flux measured at mean soil temperature (SRMAST), but the robustness of this approach needs to be evaluated in diverse ecosystem types and climatic conditions globally. We used a global soil respiration database (SRDB-V4, with 823 SR observations worldwide) to test the capability of SRMAST to predict SRannual. SRMAST estimated using a variety of methods all showed clear relationships with annual SRannual. Two single-rate methods (i.e., using the single SR rate most close to mean annual soil temperature, or the single SR rate most close to mean annual air temperature) showed the most pronounced divergence from the true SRannual, but errors significantly decreased when using multiple SR rates within 1 ? of the mean annual soil temperature to estimate SRMAST. SRannual was most closely correlated with SRMAST estimated via a Q10 relationship, but this method has a potential autocorrelation issue that we explore and discuss. Air temperature data are much more widely available than is soil temperature, and we found that SR at mean annual air temperature (SRMAAT) can be used to predict SRannual as well. This study builds on Bahn et al. (2010) to demonstrate that SR measured at both annual mean soil and air temperature can be used to predict annual SR, with well-quantified errors. This capability could be used to reduce SR measurement frequency required for estimating SRannual and greatly decrease cost, factors that are generally important but especially in lower-income countries and cold, inaccessible regions.

Soil respiration, temperature, modeling↗
DOE OSTI2024

Bayesian parameter estimation and evaluation of the K -ω shear stress transport model for plane impinging jets

Numerical simulations with semi-empirical turbulence models are commonly used to model impinging jets, often used for cooling solid surfaces. In this work, the constants in the k-ω shear stress transport model in ANSYS FLUENT are calibrated to experimental velocity and heat transfer data for a plane turbulent impinging air jet to determine if Kennedy-O'Hagan calibration (Kennedy and O'Hagan 2001 J. R. Stat. Soc. B 63 425–64) can improve predictions of near-surface velocities and surface Nusselt numbers for similar flows. Impinging jets have been proposed to cool the target plates of the divertor in future magnetic fusion energy reactors, where simulations are used to estimate divertor performance. The flat-plate divertor (Wang et al 2009 Fusion Sci. Technol .56 1023–7) uses a plane jet of helium issuing from a B = 0.5 mm slot to cool a surface with radius of curvature of 44 B at a distance 4 B from the slot. Predictions from the calibrated numerical model are compared with independent experimental data at different flow conditions, as well as surface temperature data for a flat plate divertor test section. The contribution of this work is evaluation of the accuracy of a calibrated turbulence model for modest extrapolations in flow geometry and flow conditions for a plane impinging jet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Detection of CMB-Cluster Lensing using Polarization Data from SPTpol

Here, we report the first detection of gravitational lensing due to galaxy clusters using only the polarization of the cosmic microwave background (CMB). The lensing signal is obtained using a new estimator that extracts the lensing dipole signature from stacked images formed by rotating the cluster-centered Stokes QU map cutouts along the direction of the locally measured background CMB polarization gradient. Using data from the SPTpol 500 deg 2 survey at the locations of roughly 18 000 clusters with richness λ ≥ 10 from the Dark Energy Survey (DES) Year-3 full galaxy cluster catalog, we detect lensing at 4.8σ. The mean stacked mass of the selected sample is found to be (1.43 ± 0.40) × 10 14 M ⊙ which is in good agreement with optical weak lensing based estimates using DES data and CMB-lensing based estimates using SPTpol temperature data. This measurement is a key first step for cluster cosmology with future low-noise CMB surveys, like CMB-S4, for which CMB polarization will be the primary channel for cluster lensing measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Giant kelp genetic monitoring before and after disturbance reveals stable genetic diversity in Southern California

Given the impacts of climate change and other anthropogenic stressors on marine systems, there is a need to accurately predict how species respond to changing environments and disturbance regimes. The use of genetic tools to monitor temporal trends in populations gives ecologists the ability to estimate changes in genetic diversity and effective population size that may be undetectable by traditional census methods. Although multiple studies have used temporal genetic analysis, they usually involve commercially important species, and rarely sample before and after disturbance. In this study, we run a temporal analysis of giant kelp, Macrocystis pyrifera , genetic diversity over the scope of 10 years (2008-2018) using the same microsatellite marker panel to assess the genetic consequences of disturbance in several populations of giant kelp ( Macrocystis pyrifera ) in the Southern California Bight. The study is a rare pre- and post-disturbance microsatellite analysis that included declines to giant kelp caused by the 2015/16 El Nino Southern Oscillation event. We used canopy biomass estimated by remote sensing (Landsat) to quantify the extent of disturbance to kelp beds, and sea surface temperature data to understand how kelp was pushed towards its temperature limits during this period. Despite prolonged periods with decreased canopy at several sites, no changes in genetic structure and allelic richness were observed. We argue that giant kelp in the region is best described as a “patchy population” system where true extinctions are rare. We discuss how deep refugia of subsurface sporophytes and cryptic microscopic life stages could have kept genetic diversity through disturbance. Given the increasing effects of climate change and uncertainty in modeling impacts of species with cryptic life history stages, we suggest further investigation to reveal the role such stages play in species resilience. Genetic monitoring studies of sites selected by remote census demographic and climate surveys should be continued in the future given the predicted impacts of climate change.

Klingbeil, III, William H.↗
NASA NTRS1976

A comparison of measured and inferred temperatures from AEROS-B

The neutral composition and the temperature data obtained from the AEROS-B Neutral Atmosphere Temperature Experiment (NATE) and the Neutral and Ion Mass Spectrometer (NIMS) are compared, and the general validity of inferring gas temperatures from N2 and Ar density profiles is examined by comparing them with the in situ measured values of the neutral kinetic temperature (NATE). At times serious discrepancies are noted between the inferred and the measured temperature. This is particularly evident during periods of increased magnetic activity when the normally observed latitudinal variations are apparently modulated by waves propagating from the polar region to low latitudes. Under these conditions the N2 and Ar densities and temperature oscillations are usually out of phase, and the temperatures inferred from N2 and Ar at a given point become meaningless.

Chandra, S.↗
NASA NTRS1980

LAMMR world data base documentation support and demonstrations

The primary purpose of the World Surface Map is to provide the LAMMR subsystem with world surface type classifications that are used to set up LAMMR LEVEL II process control. This data base will be accessed solely by the LAMMR subsystem. The SCATT and ALT subsystems will access the data base indirectly through the T sub b (Brightness Temperature) Data Bank, where the surface types were updated from a priori to current classification, and where the surface types were organized on an orbital subtrack basis. The single most important factor in the design of the World Surface Maps is the ease of access to the information while the complexity of generating these maps is of lesser importance because their generation is a one-time, off-line process. The World Surface Map provides storage of information with a resolution of 7 km necessary to set flags concerning the earth's features with a different set of maps for each month of the year.

Chin, R.↗
NASA NTRS1987

Hydrogen oxidation mechanism with applications to (1) the chaperon efficiency of carbon dioxide and (2) vitiated air testing

Ignition delay times for the hydrogen/oxygen/carbon dioxide/argon system were obtained behind reflected shock waves. A detailed kinetic mechanism modeled the experimental hydrogen/oxygen data, Skinner and Ringrose's high-pressure data, and Slack and Grillo's hydrogen/air data. A carbon dioxide chaperon efficiency of 7.0 +/- 0.2 was determined. The reaction pathway H2O yields H2O2 yields OH yields H was required to model the high-pressure data. It is suggested that some of the lowest temperature data points (1.0 and 0.5 atm) for Slack and Grillo's hydrogen/air experiments are in error. It was found that the technique of simplifying a detailed kinetic mechanism for a limited range of experimental data may render the model useless for other test conditions.

Brabbs, Theodore A.↗
NASA NTRS1993

Energetics of the dayside ionosphere of Venus

A reanalysis of the Pioneer Venus electron temperature data base showed a strong correlation between elevated electron temperatures and induced magnetic fields in the dayside ionosphere above about 200 km. These results suggest, although not conclusively, that the elevated temperatures are the result of reduced vertical conductivities caused by the horizontal, induced fields with a possible contribution from energy deposition by magnetosheath electrons moving along the field from the tail region.

Dobe, Zoltan↗
DOE OSTI2022

Wetting Properties of Molten Salts

Wettability is a key piece of information in understanding the behavior of molten salts at material interfaces. Wettability is most easily characterized by contact angle which is measurable using the sessile drop method. A modified sessile drop method was used to measure the contact angle of the LiCl-KCl eutectic at varying temperatures on Nickel 200, Hastelloy C276, Glassy Carbon, and MACOR machinable ceramic. The contact angle was used with existing surface temperature data to find the work of adhesion at various temperatures. Finally, problems encountered during the experiment are listed and possible improvements are provided.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Use of Spacecraft Data to Drive Regions on Mars where Liquid Water would be Stable

Combining Viking pressure and temperature data with Mars Orbital Laser Altimeter (MOLA) topography data we have computed the fraction of the martian year during which pressure and temperature allow for liquid water to be stable on the martian surface. We find that liquid water would be stable within the Hellas and Argyre basin and over the northern lowlands equatorward of about 40 degrees. The location with the maximum period of stable conditions for liquid water is in the southeastern portion of Utopia Planitia where 34% of the year liquid water would be stable if it was present. Locations of stability appear to correlate with the distribution of valley networks.

Lobitz, Brad↗
NASA NTRS2012

An Enhanced TIMESAT Algorithm for Estimating Vegetation Phenology Metrics from MODIS Data

An enhanced TIMESAT algorithm was developed for retrieving vegetation phenology metrics from 250 m and 500 m spatial resolution Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation indexes (VI) over North America. MODIS VI data were pre-processed using snow-cover and land surface temperature data, and temporally smoothed with the enhanced TIMESAT algorithm. An objective third derivative test was applied to define key phenology dates and retrieve a set of phenology metrics. This algorithm has been applied to two MODIS VIs: Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI). In this paper, we describe the algorithm and use EVI as an example to compare three sets of TIMESAT algorithm/MODIS VI combinations: a) original TIMESAT algorithm with original MODIS VI, b) original TIMESAT algorithm with pre-processed MODIS VI, and c) enhanced TIMESAT and pre-processed MODIS VI. All retrievals were compared with ground phenology observations, some made available through the National Phenology Network. Our results show that for MODIS data in middle to high latitude regions, snow and land surface temperature information is critical in retrieving phenology metrics from satellite observations. The results also show that the enhanced TIMESAT algorithm can better accommodate growing season start and end dates that vary significantly from year to year. The TIMESAT algorithm improvements contribute to more spatial coverage and more accurate retrievals of the phenology metrics. Among three sets of TIMESAT/MODIS VI combinations, the start of the growing season metric predicted by the enhanced TIMESAT algorithm using pre-processed MODIS VIs has the best associations with ground observed vegetation greenup dates.

Tan, Bin↗
NASA NTRS1986

The solar and dynamically induced oscillations in the stratosphere

The temporal and spatial features of stratospheric fluctuations are analyzed using 2.5 years of ozone and temperature data from the Nimbus 7 solar backscattered ultraviolet and the SAMS experiments. It is observed that the oscillations are dynamically induced perturbations in the winter hemisphere and the 27-day modulation of the solar UV radiation. The fluctuations in the ozone and temperature are compared with solar activity. The effects of solar and temperature perturbations on stratospheric ozone are examined; it is shown that the dynamically induced oscillations are global and independent of solar activity. The seasonal, latitudinal, and altitudinal variations of the regression factors and their influence on the ozone are studied. Multiple regression and cross-spectral analyses of ozone, temperature, and solar flux data reveal that the ozone mixing ratio is more sensitive to changes in temperature than changes in solar activity.

Chandra, S.↗
NASA NTRS1991

Use of the Long Duration Exposure Facility's thermal measurement system for the verification of thermal models

Results are presented of the comparison between the Long Duration Exposure Facility (LDEF) Thermal Measurements Systems (THERM) recorded temperature data and the predicted values as calculated prior to the LDEF deployment. The postflight thermal model was verified and calculated temperature uncertainties were reduced to under + or - 18 F from the preflight uncertainties of + or - 40 F. The THERM consisted of 8 temperature sensors, a shared tape recorder, a standard LDEF flight battery, and an electronics control box. The temperatures were measured at selected locations on the LDEF structure interior during the first 490 days of flight and recorded for postflight analysis. After the recorder was recovered from space, the tape recorder was recovered and the data reduced for comparison to the LDEF predicted temperatures. By comparing the calculated values to the measured data, a verified thermal model that presents the best agreement with the THERM data was obtained. The THERM experiment provided an economical way of performing a postflight verification of the LDEF Thermal Model by recording a limited number of flight temperatures on typical locations of the LDEF structure.

Berrios, William M.↗