Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Probing the Active Surface Sites for CO Reduction on Oxide-Derived Copper Electrocatalysts

CO electroreduction activity on oxide-derived Cu (OD-Cu) was found to correlate with metastable surface features that bind CO strongly. OD-Cu electrodes prepared by H 2 reduction of Cu 2 O precursors reduce CO to acetate and ethanol with nearly 50% Faradaic efficiency at moderate overpotential. Temperature-programmed desorption of CO on OD-Cu revealed the presence of surface sites with strong CO binding that are distinct from the terraces and stepped sites found on polycrystalline Cu foil. After annealing at 350 °C, the surface-area corrected current density for CO reduction is 44-fold lower and the Faradaic efficiency is less than 5%. These changes are accompanied by a reduction in the proportion of strong CO binding sites. Here, we propose that the active sites for CO reduction on OD-Cu surfaces are strong CO binding sites that are supported by grain boundaries. Uncovering these sites is a first step toward understanding the surface chemistry necessary for efficient CO electroreduction.

36 MATERIALS SCIENCE↗

Reactions of NO2 with Ba(OH)2 on Pt(111)

The interaction of NO2 with amorphous and crystalline Ba(OH)2 supported on Pt(111) was studied in the wide pressure range of 1.0 × 10-9 to 1.0 × 10-4 Torr and compared to that with a thick (> 20 monolayer equivalent (MLE)) BaO film using infrared reflection absorption spectroscopy (IRAS), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). The amorphous and crystalline Ba(OH)2 layers were prepared by exposing a thick BaO (> 20 MLE) layer on Pt(111) to H2O at 300 and 425 K, respectively. The amorphous and crystalline Ba(OH)2 layers partially convert to Ba(NOx)2 (nitrites and nitrates) following their exposure to elevated NO2 pressure (~1.0 × 10-4 Torr) at 300 K. The exposure of the crystalline-Ba(OH)2/Pt(111) system to NO2 at 425 K, however, leads to the desorption of H2O and the complete conversion of the crystalline Ba(OH)2 layer to Ba(NOx)2, which consists of mainly crystalline nitrates and a small amount of nitrites. The amounts of NOx stored by BaO (> 20 MLE)/Pt(111) and crystalline Ba(OH)2/Pt(111) systems upon their exposure to NO2 at 425 K are comparable. The thus-formed bulk crystalline Ba(NO3)2 phase decomposes in two steps, both releasing NO and O2, in accord with the melting/decomposition scheme for bulk Ba(NO3)2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formaldehyde Polymerization on (WO3)3/TiO2(110) Model Catalyst

Polymerization of formaldehyde, H2CO, was studied under ultrahigh vacuum conditions on a model catalyst consisting of monodispersed (WO3)3 clusters anchored on TiO2(110. Formaldehyde oligomers, (H2CO)n, desorbing from the polymer that formed on the catalyst surface are detected between 250 and 325 K in temperature programmed desorption experiments. At least two monolayers (ML) of H2CO are required on the surface to observe (H2CO)n desorption and the amount saturates for H2CO coverages in excess of ~30 ML. The presence of H2CO multilayers is required for the polymerization to take place indicating that it had to occur below 100 K. The saturation amount increases with increasing coverage of (WO3)3 clusters with the highest amount of ~13 ML observed on 1.2 (WO3)3/nm2 . No (H2CO)n desorption was observed on the bare TiO2(110) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation, characterization and reactivity of adsorbed oxygen on BaO/Pt(111)

The formation of adsorbed O (Oad) species and their reactivities in CO oxidation on BaO/Pt(111) (at two BaO coverages) were studied with temperature programmed desorption (TPD), infrared reflection absorption (IRA) and X-ray photoelectron (XP) spectroscopies. In neither of these two systems was the Pt(111) surface completely covered with BaO. On the system with lower BaO coverage (~45 % of the Pt(111) surface is covered by BaO), two different Oad species form following the adsorption of O2 at 300 K: O adsorbed on BaO-free Pt(111) sites (OPt) and at the Pt-BaO interface (Oint). On the system with higher BaO coverage (~60 % of the Pt(111) surface is covered by BaO), two types of Oint are seen at the Pt-BaO interface. The desorption of OPt from the BaO-free portion of the Pt(111) surface gives an O2 desorption peak with a maximum desorption rate at ~690 K. Migration of Oint to the Pt(111) sites and their recombinative desorption give two explosive desorption features at ~760 and ~790 K in the TPD spectrum. The reactivities of these Oad species with CO to form CO2 follow their sequence of desorption; i.e., the OPt associated with the BaO-free Pt(111) surface, which desorbs at 690 K, reacts first with CO, followed by the Oint species at the Pt-BaO interface (first the one that desorbs at ~760 K and finally the one that is bound the most strongly to the interface, and desorbs at ~790 K). This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of Absolute Coverages for Small Aliphatic Alcohols on TiO2(110)

The absolute coverages of water and small aliphatic alcohols (C1-C4) were determined on TiO{sub 2}(110) using a combination of temperature programmed desorption and liquid nitrogen cooled quartz crystal microbalance measurements. The absolute saturation coverages of water on Ti{sup 4+} and bridging oxygen (O{sub b}) sites are found to be equal to 1 monolayer with respect to the number of Ti{sup 4+} and/or O{sub b} sites (1 ML {triple_bond} 5.2 x 10{sup 14} cm{sup 2}) in a good agreement with prior studies. The saturation coverages of primary alcohols on Ti{sup 4+} sites are found to be approximately constant and equal to 0.77 ML. This indicates that the increasing length of the alkyl chains does not contribute to additional steric hindrance. Additional steric hindrance is observed with increasing number of chains as shown for secondary alcohols and tertiary t-butanol where the coverage decreases to 0.62 and 0.44 ML, respectively. On O{sub b} rows, a monotonic decrease of the alcohol coverage is observed for both increasing length of the alkyl chains and the chain number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation, Characterization, and Catalytic Properties of Tungsten Trioxide Cyclic Trimers on FeO(111)/Pt(111)

The structure and catalytic activity of tungsten oxide clusters formed via sublimation of monodispersed cyclic (WO{sub 3}){sub 3} onto FeO(111)/Pt(111) surface has been studied by a combination of scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), temperature programmed desorption (TPD) and density function theory (DFT). After the (WO{sub 3}){sub 3} sublimation, STM images reveal new features composed of three bright maxima arranged in triangular configurations with the distances of {approx}10 {angstrom}. These distances are significantly larger compared to the size of (WO{sub 3}){sub 3} indicating that the clusters dissociated. This conclusion is corroborated by DFT calculations showing that the cluster dissociation into the surface-bound WO{sub 3} monomers is endothermic and kinetically feasible at 300 K. The dissociation is accompanied by significant FeO(111) rearrangements with the Fe ions being pulled on top of the surface and bonded to the WO{sub 3} fragments. Both surface spectroscopies (XPS and IRAS) and calculations indicate that the W ions in the WO{sub 3} monomers remain in (6+) oxidation state and possess terminal W=O groups. Our TPD studies show that this system do not efficiently catalyze alcohol dehydration. This inactivity is explained based on the reaction mechanism calculated by DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unexpected Nondissociative Binding of N2O on Oxygen Vacancies on a Rutile TiO2(110)-1×1

The interaction of N{sub 2}O with oxygen vacancies (V{sub O}'s) on a partially-reduced rutile TiO{sub 2}(110)-1 x 1 surface was investigated using temperature-programmed desorption (TPD). Contrary to a common belief that V{sub O} on a rutile TiO{sub 2}(110) is a dissociation site for N{sub 2}O, our results indicate that N{sub 2}O does not dissociate to form N{sub 2}(g) and O(a). In TPD, N{sub 2}O desorption shows two peaks with maxima at 135 and 175 K that are assigned to N{sub 2}O desorption from Ti{sup 4+} and V{sub O} sites, respectively, with absolute coverages determined to be 5.1 x 10{sup 14} N{sub 2}O/cm{sup -2} and 2.6 x 10{sup 13} cm{sup -2}, respectively. When V{sub O}'s are passivated by dissociative adsorption of H{sub 2}O, the N{sub 2}O desorption peak at 175 K disappears, evidencing that the peak is related to V{sub O}-bonded N{sub 2}O. The absence of N{sub 2}O dissociation on V{sub O}'s is supported by a number of observations. First, the integrated amount of N{sub 2}O desorbed from the substrate during TPD vs. the amount of N{sub 2}O dosed at 70 K shows a straight line with no offset indicating no loss of N{sub 2}O due to the N{sub 2} formation. Second, N{sub 2}O scattering experiments at 300-350 K indicate no change in the V{sub O} concentration as determined from the H{sub 2}O TPD spectra. Third, N{sub 2}O uptake experiments at 70-90 K show that the N{sub 2} desorption feature is observed from TiO{sub 2}(110) surfaces without V{sub O}'s, suggesting a possible contribution from background N{sub 2} adsorption. Based on the above observations, we conclude that N{sub 2}O does not dissociate on V{sub O} sites on TiO{sub 2}(110) in contrast with the currently accepted view.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Nanoporous WO3 Films Grown via Ballistic Deposition

We report on the preparation and characterization of high surface area, supported nanoporous tungsten oxide films prepared under different conditions on polished polycrystalline Ta and Pt(111) substrates via direct sublimation of monodispersed gas phase of cyclic (WO3)3 clusters. Scanning Electron Microscopy and Transmission Electron Microscopy were used to investigate the film morphology on a nanometer scale. The films consist of arrays of separated filaments that are amorphous. The chemical composition and the thermal stability of the films were investigated by means of X-ray Photoelectron Spectroscopy. The surface area and the distribution of binding sites on the films are measured as functions of growth temperature, deposition angle, and annealing conditions using temperature programmed desorption of Kr. Films deposited at 20 K and at an incident angle of 65{sup o} from substrate normal display the greatest specific surface area of {approx}560 m2/g.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Water in Methanol Photochemistry on Rutile TiO2(110)

Photochemistry of the molecularly and dissociatively adsorbed forms of methanol on the vacuum-annealed rutile TiO2(110) surface was explored using temperature programmed desorption (TPD), both with and without coadsorbed water. Methoxy, and not methanol, was confirmed as the photochemically active form of adsorbed methanol on this surface. UV irradiation of methoxy-covered TiO2(110) lead to depletion of the methoxy coverage and formation of formaldehyde and a surface OH group. Coadsorbed water did not promote either molecular methanol photochemistry or thermal decomposition of methanol to methoxy. However, terminal OH groups (OHt), prepared by coadsorption of water and oxygen atoms, thermally converted molecularly adsorbed methanol to methoxy at 120 K, thus enabling photoactivity. While chemisorbed water molecules had no influence on methoxy photochemistry, water molecules hydrogen-bonded in the second layer to bridging oxygen (Obr) sites inhibited the methoxy photodecomposition to formaldehyde. From this we conclude that Obr sites accept protons from the hole-mediated conversion of methoxy to formaldehyde. These results provide new fundamental understanding of the hole-scavenging role of methanol in photochemical processes on TiO2-based materials and how water influences this photochemistry. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle under contract DEAC05-76RL01830. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

Environmental Molecular Sciences Laboratory↗

2(110)-1×1

Explore the source record for details and available documents.

Xiao, Lin↗

Influence of Adsorption Site and Wavelength on the Photodesorption of NO from the (Fe,Cr) 3 O 4 (111) Mixed Oxide Surface

The photochemical properties of nitric oxide on a mixed oxide single crystal surface was examined in ultrahigh vacuum (UHV) using temperature programmed desorption (TPD), photon stimulated desorption (PSD) and low energy electron diffraction (LEED). The mixed oxide was a 75% Fe and 25% Cr corundum (0001) oxide film prepared on an α-Al2O3(0001) crystal, however its surface became terminated with a magnetite-like (111) structure after sputter/anneal cleaning, leading to a surface designated of (Fe,Cr)3O4(111). TPD of NO from the (Fe,Cr)3O4(111) surface revealed three chemisorbed states at 220, ~315 and 370 K assigned to NO binding at Fe3+, Cr3+ and Fe2+ sites, respectively. No significant thermal chemistry of NO was detected. NO photodesorption, the primary photochemical pathway in UHV, was sensitive to the adsorption site, with rates at the three adsorption sites following the trend: Fe3+ > Fe2+ > Cr3+. Multiexponential rate behavior seen in the overall NO PSD spectra was linked directly to site heterogeneity being manifested as a convolution of the individual NO photodesorption rates at the three types of surface sites. The photodesorption rate with UV light (365 nm) was ~10 times greater than that in the visible, but the per-photon rates across the visible spectrum (from 460 to 630 nm) were independent of the wavelength, which is suggestive of localized photon absorption at the adsorption site. Results in this study demonstrate that the adsorption site plays a critical role in determining photochemical rates on complex oxide surfaces. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multi-program national laboratory operated for DOE by Battelle. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

36 MATERIALS SCIENCE↗

Oxidation, Reduction, and Condensation of Alcohols over (MO3)3 (M=Mo, W) Nanoclusters

The reactions of deuterated methanol, ethanol, 1-propanol, 1-butanol, 2-propanol, 2-butanol and t-butanol over cyclic (MO3)3 (M = Mo, W) clusters were studied experimentally with temperature programmed desorption (TPD) and theoretically with coupled cluster CCSD(T) theory and density functional theory. The reactions of two alcohols per M3O9 cluster are required to provide agreement with experiment for D2O release, dehydrogenation and dehydration. The reaction begins with the elimination of water by proton transfers and forms an intermediate dialkoxy species which can undergo further reaction. Dehydration proceeds by a β hydrogen transfer to a terminal M=O. Dehydrogenation takes place via an α hydrogen transfer to an adjacent MoVI = O atom or a WVI metal center with redox involved for M = Mo and no redox for M = W. The two channels have comparable activation energies. H/D exchange to produce alcohols can take place after olefin is released or via the dialkoxy species depending on the alcohol and the cluster. The Lewis acidity of the metal center with WVI being larger than MoVI results in the increased reactivity of W3O9 over Mo3O9 for dehydrogenation and dehydration.

Environmental Molecular Sciences Laboratory↗

Reactions of Deuterated Methanol (CD3OD) on Fe3O4(111)

We report an experimental and theoretical investigation of the decomposition (partial oxidation) of deuterated methanol (CD3OD) on a single-crystal Fe3O4(111) surface. The crystal surface contains majority areas of a Fe-terminated Fe3O4(111) surface as well as smaller regions of O-terminated FeO(111) or biphase surface reconstruction. Our investigation uses a combination of scanning tunneling microscopy, temperature-programmed desorption, and density functional theory calculations to examine the surface reactions and adsorbates as a function of coverage. Our studies show that the reaction of methanol on this iron–oxide surface is highly sensitive to atomic-level surface reconstructions

Environmental Molecular Sciences Laboratory↗

Ammonia formation from NO reaction with surface hydroxyls on rutile TiO2 (110) - 1×1

The reaction of NO with hydroxylated rutile TiO2(110)-1×1 surface (h-TiO2) was investigated as a function of NO coverage using temperature-programmed desorption. Our results show that NO reaction with h-TiO2 leads to formation of NH3 which is observed to desorb at ~ 400 K. Interestingly, the amount of NH3 produced depends nonlinearly on the coverage of NO. The yield increases up to a saturation value of ~1.3×1013 NH3/cm2 at a NO dose of 5×1013 NO/cm2, but subsequently decreases at higher NO doses. Preadsorbed H2O is found to have a negligible effect on the NH3 desorption yield. Additionally, no NH3 is formed in the absence of surface hydroxyls (HOb’s) upon coadsorption of NO and H2O on a stoichiometric TiO2(110) (s-TiO2(110)). Based on these observations, we conclude that nitrogen from NO has a strong preference to react with HOb’s on the bridge-bonded oxygen rows (but not with H2O) to form NH3. The absolute NH3 yield is limited by competing reactions of HOb species with titanium-bound oxygen adatoms to form H2O. Our results provide new mechanistic insight about the interactions of NO with hydroxyl groups on TiO2(110) .

Ammonia↗

Water as a Catalyst: Imaging Reactions of O-2 with Partially and Fully Hydroxylated TiO2(110) Surfaces

The reactions of molecular oxygen with bridging hydroxyl groups, OHb, formed by H2O dissociation on bridging oxygen vacancies of TiO2 (110) are studied at low and high OHb coverages as a function of the O2 exposure, using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and electron simulated desorption (ESD) techniques. On partially hydroxylated surfaces, the sudden simultaneous disappearance of oxygen vacancies and oxygen adatoms formed by O2 dissociation is observed at high O2 exposures. On fully hydroxylated TiO2 surfaces, which enable us to compare results of STM, TPD and ESD studies, most of OHb’s are removed via reacting with O2. Hence, fully hydroxylated TiO2 surfaces can be converted to nearly stoichiometric surfaces, albeit with some amount of adsorbed molecular water. Formation of mobile H2O molecules and water-assisted diffusion of the reactants plays an important role in the kinetics of the processes on both partially and fully hydroxylated surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Comparison of the Reactivity of Pd Supported on ZnO(10(1)over-bar0) and ZnO(0001)

The dependence of ZnO surface structure on Pd/ZnO catalyzed methanol decomposition was investigated using model catalysts consisting of Pd films and particles on ZnO and ZnO(0001) single crystals. XPS studies showed that vapor-deposited Pd grows two dimensionally at 300 K and agglomerates into particles upon heating. Temperature programmed desorption (TPD) experiments showed that CO adsorption was weaker on Pd/ZnO(0001) relative to Pd/ZnO and that PdZn alloy formation was more facile on the ZnO(0001) compared to ZnO . Large differences in the amount of CO produced during methanol TPD on the Pd/ZnO(0001) and Pd/ZnO samples was also observed and attributed to the presence of highly active sites at the Pd-ZnO(0001) interface. Comparisons to high surface area Pd/ZnO catalysts indicate that similar structural effects may also influence their reactivity.

10 SYNTHETIC FUELS↗

First-principles Analysis of NOx Adsorption on Anhydrous γ-Al2O3 Surfaces

The interaction of nitrogen oxides NOx (x=1-3) with gamma Al2O3 has been investigated using first-principles density functional theory calculations. NO and NO2 weakly physisorb on the clean, dehydrated (100) and (110) surfaces of gamma Al2O3, whereas the adsorption of the NO3 radical is rather strong. Only the basic-like O-down adsorption configurations were found to be stable. The interaction between NOx and gamma Al2O3 can be described as a surface mediated electron transfer process. For single NOx adsorption, greater electron transfer from the surface to the adsorbate (negatively charged) yields stronger interactions between NOx and the surface. The adsorption of four combinations of NOx+NOy (x=1-3, y=2, 3) pairs on the (100) and the (110) facets of gamma Al2O3 were investigated. Except for the NO2+NO2 pair, a strong cooperative effect that substantially enhances the stability of NOx on both gamma Al2O3 surfaces was found. This cooperative effect consists of surface-mediated electron transfer processes resulting in a favorable electrostatic interaction between two adsorbed NOx species. The pair was found to be the thermodynamically most stable state among the co-adsorbed NOx+NOy pairs on both gamma Al2O3 surfaces. The results are used to analyze the experimentally observed NOx evolution during temperature programmed desorption from NO2-saturated gamma Al2O3 substrates. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of FeO(111)/Pt(111)with Alcohols

We report on the reactivity of a FeO(111) monolayer grown on Pt(111) toward aliphatic alcohols. Using a combination of temperature programmed desorption, infrared reflection-absorption spectroscopy, and scanning tunneling microscopy techniques we show that the alcohols dissociate primarily at FeO(111) step edges and their oxidation leads to the removal of the FeO(111) film. Upon annealing, FeO(111) lattice oxygen is incorporated into the reaction products and reduced iron left behind dissolves into the underlying Pt(111) substrate. Ethanol is employed in a more detailed spectroscopic study to follow the reaction products and surface intermediates as the removal of FeO(111) proceeds. The ethoxy species formed upon dissociative adsorption of ethanol at the FeO(111) step edges undergo partial oxidation to acetaldehyde and a complete oxidation to CO and H2O. Other products, CH4 and H2, associated with the reactions occurring on Pt(111) are also observed as the bare Pt(111) surface appears. A similar etching process was also observed for n-decane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗