Search NASA⌕ Search

SEARCH · Search NASA

Results for “textures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterization of Recrystallized Grains During Static Recrystallization of Hot-Compressed Mg–Zn–Ca Alloys Using In Situ Far-Field High-Energy Diffraction Microscopy

In this study, we explored the effect of Zn content on the static recrystallization of three 80 pct hot-compressed alloys, Mg–0.5Zn–0.1Ca wt pct (ZX050), Mg–1Zn–0.1Ca wt pct (ZX10), and Mg–3.2Zn–0.1Ca wt pct (ZX30), using far-field high-energy microscopy (ff-HEDM). Individual recrystallized grains were tracked and their 3D centroid, relative volume, and grain-averaged crystallographic orientation were measured during annealing. These measurements were used to compare the recrystallization kinetics and texture evolution of recrystallized grains in ZX alloys as a function of the Zn content. Fully recrystallized microstructures were observed for the ZX30 and the ZX10 alloys after annealing at 230 °C and 330 °C, respectively. In contrast, only a partially recrystallized microstructure for the ZX050 alloy was observed after > 1 hour of annealing at 430 °C. The resistance to recrystallization with decreasing Zn content was also confirmed by detecting faster growth rates of recrystallized grains in the ZX10 and ZX30 alloys, and slower growth rates in the ZX050 alloy. The significant recrystallization texture weakening of the ZX10 and ZX30 alloys and the development of a basal texture in the ZX05 alloy were described based on the orientation dependency of nucleation and growth of recrystallized grains. The analysis demonstrated that texture weakening was associated with increasing Zn content in Mg–Zn–Ca alloys.

Roumina, Reza [Univ. of Michigan, Ann Arbor, MI (U↗
DOE OSTI2019

Orientation Relationships of Pure Tin on Single Crystal Germanium Substrates

The limited number of independent β-Sn grain orientations resulting from the difficulty in nucleating β-Sn during solidification of Sn-based solders has a large effect on the resulting β-Sn grain size and, hence, on overall solder joint performance and reliability. This study analyzes the efficacy of Ge as a heterogeneous nucleation agent for β-Sn by observing the morphologies and orientation relationships of as-deposited, solid-state annealed, and liquid-state annealed pure Sn films on single crystal Ge (100), (110), and (111) substrates. Here, the results from scanning electron microscopy and electron backscatter diffraction showed that the as-deposited Sn films all deposited with a Sn (001)|| z-axis texture, regardless of the underlying Ge substrate orientation. Solid-state annealing at 150 °C for 5 min did not result in significant dewetting of the Sn films, and the films maintained their as-deposited texture of Sn (001)|| z-axis, regardless of the underlying Ge substrate orientation. Liquid-state annealing at 235 °C for 1 min resulted is large-scale dewetting of the Sn films and re-orientation of the Sn films on the various Ge substrates. After solidification, the Ge (100) and (110) single crystal substrates produced patches of dewetted grains of the same orientation but there were no consistent Sn grain textures after liquid-state annealing, suggesting no single orientation relationship. In contrast, solidification on Ge (111) single crystal substrates resulted in isolated grains with a single Sn film texture and an orientation relationship of (100) Sn ∥(111) Ge and [100] Sn ∥[110] Ge . Density Functional Theory simulations of the experimentally observed Ge (111) sample orientation relationship and the Ge/Sn cube-on-cube orientation relationship suggest favorable relative interfacial binding energies for both interface orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantitative characterization of gradient microstructures: A study on friction stir spot processing of pure cobalt

Heterogeneous microstructures in polycrystalline metals can enhance the strength and ductility, outperforming homogeneous structures of similar composition. This study investigates deformed cobalt via friction stir spot processing with varying dwell times to uncover the effects of plastic deformation and heat generation on the formation of morphological, phase, and grain boundary character gradients. A new approach to quantify the morphological gradients in materials, which describes grain morphology in terms of density followed by parametric regression, enables direct quantification of processing depth and gradient sharpness. Results show that longer processing times increase the steepness of morphological gradients and reduce the deformation depth for friction stir spot processing with low plunge depths and high tool rotational speeds. The amount of retained FCC is increased in the shorter processing conditions, primarily due to refined grain size, increased defect content, and reduced heat generation. Crystallographic texture analysis of the HCP phase indicated a dominant B-fiber described by (0001) ∥ shear plane normal in the extreme processing conditions and the formation of a P-fiber, shear direction ∥ ⟨11$\bar2$0⟩ for intermediate dwell times. The texture of the FCC phase for low processing times was a C texture {100}⟨011⟩ where longer processing times were dominated by a [001] fiber texture with a main {110}⟨100⟩ orientation and emergence of a slight [111] fiber in the longest processing condition. The approaches outlined in this work give insight into quantifying gradients and improve the understanding of highly deformed cobalt.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Parametrically designed surface topography on CAD models of additively manufactured lattice structures for improved design validation

Additively Manufactured (AM) lattice structures of the laser powder bed fusion (LPBF) process generally have different surface geometries depending on the overhang angle and location. This means that the design validation stage is often challenging, considering it is based on an ideal Computer Aided Design (CAD) model that is not truly representative, since the AM part will be different in terms of dimensional accuracy and surface finish. Previous studies have relied on the design of surface textures that are independent of the overhang angle, or techniques based on directly using X-ray Computed Tomography (XCT) data. In this paper, a new technique for designing surface texture on the CAD of lattices has been investigated and correlated with areal surface roughness parameters. After extracting areal surface parameters from the XCT data of the lattice, the method allowed for the design of this surface texture on the part CAD taking in consideration if its up skin or down skin, without using XCT data as the main input. By applying this method, it is possible to obtain a lattice CAD model with a designed surface texture and geometry that is more representative of the actual AM lattice. The mean deviation between the CAD model with the designed surface and the XCT was a third of the one between the XCT and the initial CAD. The proposed method allows for designing and replicating LPBF AM surfaces on the CAD of a lattice, taking into consideration the dimensional deviation caused by AM surfaces, especially on overhangs. Assuming that an LPBF AM process is stable and produces approximately the same AM surface, this method can be used to predict the geometry of a lattice, providing a cost-effective and efficient methodology that minimizes the time needed for design validation.

42 ENGINEERING↗
DOE OSTI2020

Experimental verification of a crystal plasticity-based simulation framework for predicting microstructure and geometric shape changes: Application to bending and Taylor impact testing of Zr

This paper is concerned with experimental verification of a recently developed multi-scale simulation framework for plastic deformation of metallic materials from quasi-static to impact deformation conditions. The framework is a visco-plastic self-consistent (VPSC) polycrystalline model embedded in an implicit finite element method (FE-VPSC) to provide a microstructure-sensitive constitutive response at each material point. Each material point of the FEM model is a polycrystalline aggregate with crystallographic deformation mechanisms operating at the single crystal scale with their evolving activity based on a dislocation density-based hardening law and texture. Four beams and three cylinders machined in different orientations from a textured plate of high-purity zirconium are tested quasi-statically in 4-point bending and at speeds of 100 m/s, 170 m/s and 243 m/s during Taylor impact tests, respectively. The variation in dimensional changes resulting from different sample orientations in the plate with respect to loading directions is measured for each sample. Moreover, texture and twinning characterization is performed using electron backscattered diffraction (EBSD). The deformation processes and underlying evolution of microstructure are successfully simulated using the FE-VPSC framework. In doing so, the model parameters are optimized and validated across a broad range of strain rates and temperatures. Simulation results in terms of geometrical changes and microstructural evolution are compared with the experimental measurements. The model predicts anisotropic material flow resulting from the hard-to-deform crystallographic directions, the development of gradients in texture and twinning through the geometries, tension–compression asymmetry, as well as the extent of plasticity under impact.

42 ENGINEERING↗
DOE OSTI2019

A new micromechanics based full field numerical framework to simulate the effects of dynamic recrystallization on the formability of HCP metals

This work presents a new full-field, efficient and mesh-free numerical framework to model microstructure evolution, dynamic recrystallization (DRX) and formability in hexagonal closed-packed (HCP) metals such as magnesium alloys at warm temperatures. A rate tangent-fast Fourier transform-based elasto-viscoplastic crystal plasticity constitutive model for HCP metals (RTCP-FFT-HCP) is coupled with a probabilistic cellular automata (CA) approach to model DRX (CA-DRX). Furthermore, this new model is coupled with the Marciniak-Kuczynski (M-K) approach to model formability of magnesium alloys at elevated temperatures. The RTCP-FFT-HCP model computes macro stress-strain, twinning volume fraction, micromechanical fields, texture evolution and local dislocation density. Nucleation of new grains and their subsequent growth is modeled using the cellular automata approach with probabilistic state switching rule. First, the proposed RTCP-FFT-HCP model is validated by comparing the predicted stress-strain responses and texture evolution under uniaxial tension and compression with experimental measurements for AZ31 sheet alloy at room temperature. The coupled CA-RTCPFFT-HCP model is further validated by comparing the predicted stress-strain responses and texture evolution in uniaxial compression with experimental measurements at 100 °C, 200 °C and 300 °C for the AZ31 sheet alloy. Next, the forming limit diagrams (FLDs) with and without including the effects of DRX are simulated at 100 °C, 200 °C and 300 °C for AZ31 sheet alloy. The predicted FLDs with DRX show very good agreement with the experimental measurements and clearly demonstrate the need for an accurate DRX model. The study reveals that the DRX strongly affects the deformed grain structure, grain size and texture evolution and also highlights the importance accounting for DRX during FLD simulations at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Development of rare-earth-free bulk magnets with energy product up to 12 MGOe in field annealed Mn–Bi–Mg–In–Sb alloys

A treatment consisting of annealing in a moderately strong, ≤30 kOe, magnetic field was applied to arc-melted ingots and compacted melt-spun alloys with composition Mn 50 Bi 50-x-y-z Mg x In y Sb z . The high degree of texture of the magnetic α phase induced with annealing of the ingot samples (except the Mn–Bi–Sb one) allowed for accurate determination of the phase anisotropy field. Alloying was found to increase the anisotropy field from 45 kOe in the Mn 50 Bi 50 alloy to 65 kOe in the Mn 50 Bi 45 Mg 3 In 0.5 Sb 1.5 alloy. In the compacted melt-spun alloys subjected to field annealing, a higher degree of texture could be achieved after compaction which had involved less heating, when a smaller fraction of the metastable β' phase had been converted into the α phase; compaction at room temperature allowed for the highest degree of texture in the Mn 50 Bi 45 Mg 3 In 0.5 Sb 1.5 magnet. The addition of indium was found to decrease the solidus temperatures of the alloys, facilitating the development of the α phase during the field annealing and modifying the properties of the resulting magnets. Introduction of indium resulted in a higher coercivity H c of the Mn–Bi–Mg–In magnets and in a better texture of the Mn–Bi–Mg–Sn–In magnets. The former effect allowed, in particular, for a viable maximum energy product ( BH ) max of 10 MGOe to be developed in the Mn 50 Bi 46.5 Mg 3 In 0.5 magnet through annealing in a relatively low field of 15 kOe, whereas the latter effect allowed for an excellent combination of ( BH ) max = 11.6 MGOe and H c = 8.5 kOe in the Mn 50 Bi 45 Mg 3 In 0.5 Sb 1.5 magnet. The highest ( BH ) max of 12 MGOe was realized in the Mn 50 Bi 46 Mg 3 In 0.5 Sb 0.5 magnet.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions

This work investigates the microscopic deformation mechanisms of an extruded, precipitation-strengthened AZ80 magnesium (Mg) alloy subjected to strain-controlled low-cycle fatigue using in situ neutron diffraction measurements. Results demonstrate that the plastic deformation during cyclic loading is dominated by the alternating {10.2} extension twinning and detwinning mechanisms. The observed deformation mode is strongly texture and precipitate dependent. For the initial texture, the tested material has two major texture components which result in the occurrence of extension twinning during both compression and reverse tension in the first two cycles. The prolonged detwinning process in the following cycles is proposed to relieve the shear stress field of {00.2} grains, leading to the disappearance of twinning. The precipitation strengthening results in an increase of the critical resolved shear stress (CRSS) by similar to 33 MPa for the extension twinning in this AZ80 alloy. Here, the synergistic effects of the initial texture, precipitation strengthening, and load sharing of various grain families and phases contribute to the complicated evolution of dominant deformation mechanisms, among which elevated dislocation activities are believed to be responsible for the relatively poor low-cycle-fatigue lifetime when compared to other Mg alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A meta-analysis of global cropland soil carbon changes due to cover cropping

Including cover crops within agricultural rotations may increase soil organic carbon (SOC). However, contradictory findings generated by on-site experiments make it necessary to perform a comprehensive assessment of interactions between cover crops, environmental and management factors, and changes in SOC. In this study, we collected data from studies that compared agricultural production with and without cover crops, and then analyzed those data using meta-analysis and regression. Our results showed that including cover crops into rotations significantly increased SOC, with an overall mean change of 15.5% (95% confidence interval of 13.8% to 17.3%). Whereas medium-textured soils had highest SOC stocks with (mean = 39 Mg ha-1) and without (mean = 37 Mg ha-1) cover crops, fine-textured soils showed the greatest increase in SOC after the inclusion of cover crops (mean change of 39.5%). Coarse-textured (11.4%) and medium-textured soils (10.3%) had comparatively smaller changes in SOC. Cover crop mixtures resulted in greater increases in SOC compared to mono-species cover crops, and using legumes resulted in greater SOC increases than grasses and broadleaf species. Cover cropping was associated with significant SOC increases in shallow soils (= 30 cm), but not in subsurface soils (> 30 cm). The regression analysis revealed that SOC changes from cover cropping were correlated with improvements in soil quality, specifically decreased runoff and erosion and increased mineralizable carbon, mineralizable nitrogen, and soil nitrogen. Soil carbon change was also affected by annual temperature, number of years after start of cover crop usage, latitude, and initial SOC concentrations. Finally, the mean rate of carbon sequestration from cover cropping across all studies was 0.56 Mg ha-1 yr-1. If 15% of current global cropland were to adopt cover crops, this value would translate to 0.17 Pg of carbon sequestered per year or ~1-2% of current fossil fuels emissions. Altogether, these results indicated that inclusion of cover crops into agricultural rotations can enhance soil carbon concentrations, improve many soil quality parameters, and serve as a potential sink for atmosphere CO2.

Cover crop, soil organic carbon, soil quality, soi↗
DOE OSTI2025

Lipids represent a dynamic, yet stable pool of microbially-derived soil carbon

There is an emerging consensus that microorganisms are a primary source of persistent, slow-cycling soil organic matter (SOM), however which microbial residues contribute to SOM and what controls their accumulation remains unresolved. Lipids are a commonly overlooked biomolecular pool that could contribute significantly to stable SOM. While current estimates for phospholipid degradation in soils are rapid, lipids are structurally heterogeneous molecules that could turnover at different rates. Through a year-long soil incubation and compound-specific, stable isotope probing (SIP)-lipidomics, we were able to rigorously track the persistence of lipid compounds in silty and sandy switchgrass bioenergy crop soils. Here, we assessed the influence of lipid structure on soil lipid accrual and degradation as moderated by soil texture, since mineral association is presumed to be the primary mechanism for lipid persistence. After rapid incorporation of 13 C glucose into microbial biomass, we found 13 C label was retained broadly across chemically diverse lipid classes, even after one year. 13 C-labeled lipid profiles varied significantly with soil texture; however, we found no difference between sandy and silty soils in lipid retention, suggesting soil texture may only play a minor role in modulating lipid persistence. Only two lipid subclasses were found to be persistent (i.e., retention of 13 C label without significant degradation or production): phosphatidylinositol lipids and hydroxyceramide lipids, both of which are negatively charged, possibly facilitating stabilization by mineral complexation. However, several other subclasses displayed substantial ongoing production. In particular, the accumulation of triacylglycerol lipids across soil textures suggests that storage lipids may be an important component of SOC, highlighting a potential target for management strategies to promote C retention by lipid accrual. Overall, the retention for over a year of 13 C label in microbial intact lipid biomarkers reveals the importance of efficient biomass production and turnover when considering microbial C contributions to SOM.

compound-specific↗
DOE OSTI2025

Design and Control of Three-Dimensional Topological Magnetic Fields Using Interwoven Helical Nanostructures

Three-dimensional (3D) magnetic nanostructures are an emerging platform capable of creating complex topological magnetic fields. The control of localized nanoscale magnetic fields is seen to be of importance for diverse areas from bioapplications such as drug delivery, to particle trapping and controlling Majorana Fermions for quantum computing. Three-dimensional geometric confinement and proximity can create tailor-made spin textures not possible in two dimensions. The control of magnetization afforded here can allow the formation of unique stray field textures. Here, we report the creation of reconfigurable 3D topological magnetic field textures induced by an interwoven 3D nanostructure and applied field protocol. These field textures emerge due to distinct DWs formed in this structure and lead to the creation of an antivortex field, a hexapole cusp and a 3D skyrmion field tube of mixed chirality. In conclusion, our results therefore show a key step toward the design and control of topological magnetic fields on the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chemo‐mechanical Alterations Induced From CO 2 Injection in Carbonate‐Cemented Sandstone: An Experimental Study at 71 °C and 29 MPa

Abstract Carbon capture, utilization, and storage may lead to mechanical degradation of the subsurface reservoir from fluid‐rock interaction, which could lead to wellbore instability or reservoir compaction. To better understand potential relationship between mechanical degradation with various carbonate cement textures and compositions in sandstone reservoirs, six flow‐through experiments were conducted. Formation water (TDS = 5,390 mg/L) enriched with CO 2 flowed through two types of Pennsylvanian Morrow B Sandstone: an ankerite‐siderite‐cemented sandstone (disseminated cement texture) and a calcite‐cemented sandstone (poikilotopic cement texture). The experiments produced little change in permeability in the ankerite‐siderite‐cemented sandstone, but permeability increased up to more than 1 order of magnitude in the calcite‐cemented sandstone. Ultrasonic measurements and cylinder‐splitting tests (also known as Brazilian tests) suggested negligible mechanical degradation of the ankerite‐siderite‐cemented sandstone. Variable changes, with significant mechanical degradation in the static moduli, were observed in the calcite‐cemented sandstone. Thus, dissolution of the disseminated ankerite‐siderite cement (0.28–0.30%) had minimal impact on modifying the flow network and the mechanical integrity of the sandstone, whereas dissolution of the poikilotopic calcite cement (0.89–1.13%, quantified with fluid chemistry and visualized with X‐ray microcomputed tomography) impacted the mechanical strength of the sandstone by disconnecting framework grains. With the high water‐to‐rock mass ratios (7.3–8.2) and number of pore volumes (147–675) employed in these experiments, potential risks are most relevant to regions near injection wells. Ultimately, the chemo‐mechanical effects induced by CO 2 injection are strongly influenced by the cement texture and composition and the burial history of the reservoir rock.

Wu, Z.↗
DOE OSTI2024

Reducing crystal symmetry to generate out-of-plane Dzyaloshinskii–Moriya interaction

The Dzyaloshinskii-Moriya antisymmetric exchange interaction (DMI) stabilises topological spin textures with promising future spintronics applications. According to crystal symmetry, the DMI can be categorized as four different types that favour different chiral textures. Unlike the other three extensively-investigated types, out-of-plane DMI, as the last type that favours in-plane chirality, remained missing so far. Here we apply point-group-dependent DMI matrix analysis to show that out-of-plane DMI exists under reduced crystal symmetry. Through strain and structure engineering, we show how C s symmetry is realized in ultrathin magnets and observe the out-of-plane DMI stabilised in-plane chirality using spin-polarized electron microscopy. Our results show that extremely low out-of-plane DMI strengths at µeV/atom are sufficient to stabilise topological spin textures, including merons and bimerons. We also demonstrate field-induced reversible control of the in-plane chirality and merons. Our findings open up untapped paths on topological magnetic textures and their potential applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Incommensurate magnetic orders and topological Hall effect in the square-net centrosymmetric EuGa 2 Al 2 system

Neutron diffraction on the centrosymmetric square-net magnet EuGa 2 Al 2 reveals multiple incommensurate magnetic states (AFM1, 2, 3) in zero field. In applied field, a new magnetic phase (A) is identified from magnetization and transport measurements, bounded by two of the μ 0 H=0 incommensurate magnetic phases (AFM1, helical, and AFM3, cycloidal) with different moment orientations. Moreover, magnetotransport measurements indicate the presence of a topological Hall effect, with maximum values centered in the A phase. Together, these results render EuGa 2 Al 2 a material with noncoplanar or topological spin texture in applied field. X-ray diffraction reveals an out-of-plane (OOP) charge density wave (CDW) below T CDW ~50 K while the magnetic propagation vector lies in plane below T N =19.5 K. Together these data point to a new route to realizing in-plane noncollinear spin textures through an OOP CDW. In turn, these noncollinear spin textures may be unstable against the formation of topological spin textures in an applied field.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Epitaxial growth of hexagonal BaNi O 3–δ thin films on SrTi O 3 (111) substrates

Transition metal oxides containing nickel species in oxidation states higher than 3+ often exhibit high catalytic activity, which makes them promising for applications as advanced electrocatalysts for water splitting and fuel cells. Here, we examine the structure and properties of BaNiO 3 (BNO) thin films, containing formally Ni 4+ , grown on SrTiO 3 (111) substrates using oxygen-plasma–assisted molecular beam epitaxy. X-ray diffraction and scanning transmission electron microscopy measurements reveal that BNO films have a hexagonal structure with $c$- and $a$-axes of mixed textures showing epitaxial relationships BNO (0001) ∥ SrTiO 3 (111) and BNO (10$\overline{1}$0) ∥ SrTi O 3 (111), respectively. The formation of the $a$-axis texture is dominant due to the smaller lattice mismatch with the substrate. Here, density functional theory calculations confirm that the hexagonal BNO film with the $a$-axis texture is energetically more favorable than the competing $c$-axis texture. Detailed spectroscopy data analysis indicates that hexagonal BNO films contain mixtures of Ni 2+ , Ni 3+ , and Ni 4+ species, with Ni 4+ being dominant. Our study provides insights into stabilizing Ni 4+ in complex oxides, which is important for further exploration of the potential of materials containing Ni 4+ .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Differential Organic Carbon Mineralization Responses to Soil Moisture in Three Different Soil Orders Under Mixed Forested System: Supporting Data

This data contains data from 90-day long incubation study which aimed to look at the soil moisture-texture relationship on soil organic carbon (SOC) cycling. Soils were collected from three distinct soil textures from mixed forests in 2017: sandy (Georgia, 2017-05-01), loamy (Missouri, 2017-06-14) and clayey (Texas, December 2017) were incubated at different soil moisture levels (air-dried, 25% water holding capacity (WHC), 50% WHC, 100% WHC and 175% WHC) at room temperature for a period of 90 days. Files contain microbial respiration, active and slow SOC pools, and their respective mineralization rates, extractable organic carbon (C), and C-acquiring extracellular enzymes. Findings from these data were used in Singh et al. (2021). This study aimed to examine the interactive effect of soil moisture and texture on SOC mineralization. Soil samples of three distinct textures (sandy, loamy, and clayey) were collected from mixed forests of Georgia, Missouri, and Texas, respectively. Soil cores of 5 cm diameter were collected from numerous random locations at each site from 0-15 cm depth after scraping the litter layer and mixed thoroughly to obtain a composite sample per site. Three additional soil cores were collected to determine the WHC using pressure plate extractors. Soil samples were composited, and triplicate soil samples were incubated in mason jars for a period of 90 days at room temperature under different moisture regimes: air dried, 25% WHC, 50% WHC, at WHC and 100% saturation. Soil respiration was measured weekly, and destructive sampling was conducted at 1, 15, 60, and 90 days to determine extractable organic C, C acquiring enzyme activity, and active and slow SOC pools with their respective mineralization rates. The C acquiring enzyme activity was the total activity of α-glucosidase, β-glucosidase, cellobiohydrolase, and β-xylosidase enzymes. Gas samples for microbial respiration measurements were collected from headspace of incubation jars through the sampling ports on the lids and then analyzed using a Shimadzu Gas Chromatograph (GC-2014). Prior to sampling, the vials were evacuated. Blank correction was also done by collecting gas samples from empty incubation jars. Double pool exponential decay model was used in SigmaPlot to determine the active and slow SOC pools and their mineralization rates (Farrar et al., 2012; Jagadamma et al., 2014). The C-acquiring extracellular enzymes were measured using the microplate method by German et al., (2011). Microbial community structure was determined using the phospholipid fatty acid (PLFA) and neutral lipid fatty acid (NLFA) analyses (Buyer and Sasser, 2012). This dataset has seven data files provided in comma-separate (*.csv) format. Additional metadata are provided: seven data dictionaries and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

Carbon acquiring enzyme activity↗
DOE OSTI2023

One-Pot Synthesis of Melamine Formaldehyde Resin-Derived N-Doped Porous Carbon for CO 2 Capture Application

The design and synthesis of porous carbons for CO 2 adsorption have attracted tremendous interest owing to the ever-soaring concerns regarding climate change and global warming. Herein, for the first time, nitrogen-rich porous carbon was prepared with chemical activation (KOH) of commercial melamine formaldehyde resin (MF) in a single step. It has been shown that the porosity parameters of the as-prepared carbons were successfully tuned by controlling the activating temperature and adjusting the amount of KOH. Thus, as-prepared N-rich porous carbon shows a large surface area of 1658 m 2 /g and a high N content of 16.07 wt%. Benefiting from the unique physical and textural features, the optimal sample depicted a CO 2 uptake of up to 4.95 and 3.30 mmol/g at 0 and 25 °C under 1 bar of pressure. More importantly, as-prepared adsorbents show great CO 2 selectivity over N 2 and outstanding recyclability, which was prominently important for CO 2 capture from the flue gases in practical application. An in-depth analysis illustrated that the synergetic effect of textural properties and surface nitrogen decoration mainly determined the CO 2 capture performance. However, the textural properties of carbons play a more important role than surface functionalities in deciding CO 2 uptake. In view of cost-effective synthesis, outstanding textural activity, and the high adsorption capacity together with good selectivity, this advanced approach becomes valid and convenient in fabricating a unique highly efficient N-rich carbon adsorbent for CO 2 uptake and separation from flue gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Heterogeneous material integration through guided lateral growth

Methods are provided for generating a crystalline material. The methods comprise depositing a textured thin film in a growth seed area, wherein the textured thin film has a preferential crystallographic axis; providing a growth channel extending from the growth seed area, the growth channel permitting guided lateral growth; and growing a crystalline material in the growth channel along a direction that is substantially perpendicular to the preferential crystallographic axis of the textured thin film. A preferred crystalline material is gallium nitride, and preferred textured thin films are aluminum nitride and titanium nitride.

Han, Jung↗