SEARCH · Search NASA

Results for “vacuum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Hot vacuum creep forming of scale shuttle external tank dome caps

The feasibility of forming shuttle external tank dome caps by hot vacuum creep was investigated for a sub-scale configuration. Aluminum 2219-T37 at an elevated temperature equivalent to the artificial aging time and temperature was used to produce the T87 condition while achieving MIL-HBK -5 properties of 2219-T87 aluminum alloy material. A feasibility analysis was conducted in two phases: the design and build of a sub-scale hot vacuum creep forming (HVCF) die and the forming evaluation of various cap configurations. The contour was constant in all evaluations. This configuration was found to be too severe for the limited forming force available by HVCF.

Thomas, A. O.↗

NASA NTRS1975

Bearing endurance tests in vacuum for sputtered molybdenum disulfide films

Angular-contact, 440C stainless steel, ball bearings with sputtered MoS2 films 0.0000006 x 10-7m (6000 A) thick were evaluated in a vacuum bearing chamber (1750 rpm, 137.9-N- (31-lbf-) thrust load) for endurance. Two types of sputtered films were evaluated: (1) MOS2 sputtered directly onto bearing components, and (2) a thin 0.0000001 x 10-7m (1000 A) underlayer of Cr3Si2 subsequently sputtered with MoS2. Bearing test evaluations in vacuum showed that endurance lives of more than 1000 hours (105,000,000 cycles) were obtained with bearings (cage, races, and balls) directly sputtered with MoS2. The same endurance lives were also obtained when only the races and cage were sputtered with an underlayer of Cr3Si2 and subsequently with MoS2.

Spalvins, T.↗

NASA NTRS1975

Effect of electron irradiation in vacuum on FEP-A silicon solar cell covers

Fluorinated ethylene-propylene-A (FEP-A) covers on silicon solar cells were irradiated with 1-MeV electrons, in vacuum, to an accumulated fluence equivalent to approximately 28 years in synchronous orbit. The effect of irradiation on the light transmittance of FEP-A was checked by measuring the short-circuit current of the cells after each dose increment. The results indicate no apparent overall loss in transmission due to irradiation of FEP-A. Filter wheel measurements revealed some darkening of the FEP-A at the blue end of the spectrum. Although no delamination from the cell surface was observed while in vacuum, embrittlement of FEP-A occurred at the accumulated dose.

Marsik, S. J.↗

NASA NTRS1974

Calculation of complex equilibria involving vaporization into vacuum

A simplified, direct approach is presented to the description of complex equilibria involving vaporization into vacuum. Emphasis is on the basic problem-solving process and on modification of existing techniques. Sequential solutions are presented to problems involving purification of a melt by vaporization into vacuum. The effects of concentration of melt and oxygen partial pressures on vaporization rates are demonstrated.

Paule, R. C.↗

NASA NTRS1975

Corona-vacuum failure mechanism test facilities

A nondestructive corona-vacuum test facility for testing high-voltage power system components has been developed using commercially available hardware. The facility simulates operating temperature and vacuum while monitoring coronal discharges with residual gases. Corona threshold voltages obtained from statorette tests with various gas-solid dielectric systems and comparison with calculated data support the following conclusions: (1) air gives the highest corona threshold voltage and helium the lowest, with argon and helium-xenon mixtures intermediate; (2) corona threshold voltage increases with gas pressure; (3) corona threshold voltage for an armature winding can be accurately calculated by using Paschen curves for a uniform field; and (4) Paschen curves for argon can be used to calculate the corona threshold voltage in He-Xe mixtures, for which Paschen curves are unavailable.-

Lalli, V. R.↗

NASA NTRS1975

Relative quantum yield for the production of O-atom and S-atom from the photodissociation of OCS in the vacuum UV

The relative efficiencies for two dissociative channels in the vacuum UV photolysis of carbonyl sulphide have been determined using the flash photolysis-resonance fluorescence technique to measure initial yields of atomic oxygen and atomic sulphur. At wavelengths above 105 nm, the dissociation of OCS to form atomic sulphur exceeded that for the formation of atomic oxygen to such an extent that only an upper limit could be placed on the minor process. In addition, the flash photo-excitation of carbonyl sulphide produced a long-lived spontaneous emission in the UV and vacuum UV that might be due to molecular fluorescence from OCS.

Klemm, R. B.↗

NASA NTRS1976

Ellipsometer for measurement in ultrahigh vacuum

Ellipsometer, used with ultrahigh vacuum, allows measurement of varied angles of incidence. Vacuum chamber, directly incorporated into optical bench systems, allows varied angle measurements to be taken through same region of a window.

Walter, H. U.↗

NASA NTRS1975

Vacuum considerations in the design of a space simulator

Vacuum considerations in the techniques for design, fabrication, and testing of space simulators are discussed. Particular emphasis is given to a diffusion pump-rotary pump combination for the vacuum system.

Ramachandran, S.↗

NASA NTRS1975

A thermal vacuum-UV solar simulator test system for assessing microbiological viability

Microorganisms were exposed to a simulated space environment in order to assess the photobiological effect of broad spectrum, nonionizing solar electromagnetic radiation in terms of viability. A thermal vacuum chamber capable of maintaining a vacuum of 0.000133n/sq m and an ultraviolet rich solar simulator were the main ingredients of the test system. Results to date indicate the system to be capable of providing reliable microbiological data.

Ross, D. S.↗

NASA NTRS1975

Absolute calibration of a hydrogen discharge lamp in the vacuum ultraviolet

A low-pressure hydrogen discharge lamp was calibrated for radiant intensity in the vacuum ultraviolet spectral region on an absolute basis and was employed as a laboratory standard source in spectrograph calibrations. This calibration was accomplished through the use of a standard photodiode detector obtained from the National Bureau of Standards together with onsite measurements of spectral properties of optical components used. The stability of the light source for use in the calibration of vacuum ultraviolet spectrographs and optical systems was investigated and found to be amenable to laboratory applications. The lamp was studied for a range of operating parameters; the results indicate that with appropriate peripheral instrumentation, the light source can be used as a secondary laboratory standard source when operated under preset controlled conditions. Absolute intensity measurements were recorded for the wavelengths 127.7, 158.0, 177.5, and 195.0 nm for a time period of over 1 month, and the measurements were found to be repeatable to within 11 percent.

Nealy, J. E.↗

NASA NTRS1976

Integrated structure vacuum tube

High efficiency, multi-dimensional thin film vacuum tubes suitable for use in high temperature, high radiation environments are described. The tubes are fabricated by placing thin film electrode members in selected arrays on facing interior wall surfaces of an alumina substrate envelope. Cathode members are formed using thin films of triple carbonate. The photoresist used in photolithography aids in activation of the cathodes by carbonizing and reacting with the reduced carbonates when heated in vacuum during forming. The finely powdered triple carbonate is mixed with the photoresist used to delineate the cathode locations in the conventional solid state photolithographic manner. Anode and grid members are formed using thin films of refractory metal. Electron flow in the tubes is between grid elements from cathode to anode as in a conventional three-dimensional tube.

Dimeff, J.↗

NASA NTRS1975

The spatial and temperature structure of vacuum spark plasmas

The spatial and temperature structures of the X-ray emitting components of low-inductance vacuum-spark plasmas are investigated. The plasmas produced by low-inductance vacuum sparks show striking resemblances to solar-flare plasmas. High-resolution photographs show that the spark plasmas are composed of hot (about 30 million K) compact sources (less than 20 microns) and cooler (about 10 million K) larger sources (of the order of 100 microns). Both types of sources may be produced by the same plasma at different times. The differences between the solar flare iron-line spectrum near 1.9 A and the spark iron-line spectrum are discussed and interpreted.

Feldman, U.↗

NASA NTRS1975

An orbiting molecular shield vacuum facility - A materials laboratory in space

Certain classes of materials processing experiments require a combination of near zero gravity and ultrahigh vacuum. This combination of environmental requirements can be obtained within a molecular shield vacuum facility deployed from the Space Shuttle Orbiter. To avoid degradation by Orbiter effluents, it is necessary to deploy the facility from the Orbiter's immediate vicinity to a distance of about 100 meters. This may be achieved with an extendable/retractable boom, so that power and other resources are supplied by the Orbiter. Alternatively, the facility may be deployed as a free-flyer satellite and retrieved on a subsequent Orbiter mission. Preliminary results of boom design and dynamics analyses are presented.

Youngblood, J. W.↗

NASA NTRS1975

Generation of ultraviolet and vacuum ultraviolet radiation

The paper describes nonlinear optical techniques that use phase-matched mixtures of metal vapors and inert gases, or, in certain cases, only inert gases for the generation of ultraviolet radiation. These systems are transparent where nonlinear crystals are opaque and their high ionization permits optical power densities of 10 to the 10 or 10 to the 11 W/sq cm to be utilized. An experiment designed to convert incident 1.064 micron radiation to 3547 A radiation is described as are experiments designed to generate vacuum ultraviolet at 1773, 1520, 1182 and 887 A. Theoretical considerations on the use of this nonlinear optical technique for the generation of soft X-rays are presented and the construction of a vacuum ultraviolet holographic grating with a fringe spacing of 836 A is reported on.

Harris, S. E.↗

NASA NTRS1976

Characteristics and potential applications of orbiting ultrahigh vacuum facilities

The characteristics of an orbiting molecular shield ultrahigh vacuum facility are described and some examples of potential applications are discussed. Published results of a kinetic theory analysis are given. Densities within the shield of less than 1000 molecules/cu cm can be obtained allowing high purity materials processing experiments to be performed in orbit under the simultaneous conditions of ultrahigh vacuum and microgravity. Two specific experiments are discussed: the production of ultrapure materials by the electrotransport technique developed at ERDA's Ames Laboratory, Iowa State University, and the vapor deposition and space preparation of silicon solar cells.

Melfi, L. T., Jr.↗

NASA NTRS1977

Cartridge getter for vacuum jacketing

Inexpensively-manufactured getter cartridge save users time in vacuum system maintenance and allows almost anyone to carry out replacement procedure that formerly required skilled welder. Cartridge screws into port in outer wall of vacuum jacket. Getter is replaced by simply unscrewing cartridge rather than cutting and rewelding.

Luebbers, C. J.↗

NASA NTRS1977

Preliminary assessment of the vacuum environment in the wake of large space vehicles

The vacuum environment in the wake region of presently planned large space vehicles is calculated using simplified models of the particle fluxes from the various sources. The fluxes which are calculated come directly from the ambient, are due to ambient particles backscattered from spacecraft emissions, and are due to self scattering of spacecraft emissions. Using nominal values for the surface emissions, the flux density environment behind a large unmanned craft at 550 km altitude is calculated. Calculations indicate that the flux density on a wake vacuum experiment conducted in the vicinity of the shuttle is substantially greater than that behind unmanned craft.

Oran, W. A.↗

NASA NTRS1977

Thermocouples of tantalum and rhenium alloys for more stable vacuum-high temperature performance

Thermocouples of the present invention provide stability and performance reliability in systems involving high temperatures and vacuums by employing a bimetallic thermocouple sensor wherein each metal of the sensor is selected from a group of metals comprising tantalum and rhenium and alloys containing only those two metals. The tantalum, rhenium thermocouple sensor alloys provide bare metal thermocouple sensors having advantageous vapor pressure compatibilities and performance characteristics. The compatibility and physical characteristics of the thermocouple sensor alloys of the present invention result in improved emf, temperature properties and thermocouple hot junction performance. The thermocouples formed of the tantalum, rhenium alloys exhibit reliability and performance stability in systems involving high temperatures and vacuums and are adaptable to space propulsion and power systems and nuclear environments.

Morris, J. F.↗