SEARCH · Search NASA

Results for “waste utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Solid metabolic waste transport and stowage investigation

The basic Waste Collection System (WCS) design under consideration utilized air flow to separate the stool from the WCS user and to transport the fecal material to a slinger device for subsequent deposition on a storage bowel. The major parameters governing stool separation and transport were found to be the area of the air inlet orifices, the configuration of the air inlet orifice and the transport air flow. Separation force and transport velocity of the stool were studied. The developed inlet orifice configuration was found to be an effective design for providing fecal separation and transport. Simulated urine tests and female user tests in zero gravity established air flow rates between 0.08 and 0.25 cu sm/min (3 and 9 scfm) as satisfactory for entrapment, containment and transport of urine using an urinal. The investigation of air drying of fecal material as a substitute for vacuum drying in a WCS breadboard system showed that using baseline conditions anticipated for the shuttle cabin ambient atmosphere, flow rates of 0.14 cu sm/min (5 cfm) were adequate for drying and maintaining biological stability of the fecal material.

Burt, R. A.↗

NASA NTRS1976

Fire safety evaluation of aircraft lavatory and cargo compartments

A program of experimental fires has been carried out to assess fire containment and other fire hazards in lavatory and cargo compartments of wide-body jet aircraft by evaluation of ignition time, burn-through time, fire spread rate, smoke density, evolution of selected combustible and toxic gases, heat flux, and detector response. Two tests were conducted: one involving a standard Boeing 747 lavatory and one involving a simulated DC-10 cargo compartment. A production lavatory module was furnished with conventional materials and was installed in an enclosure. The ignition load was four polyethylene bags containing paper and plastic waste materials representive of a maximum flight cabin waste load. Standard aircraft ventilation conditions were utilized and the lavatory door was closed during the test. Lavatory wall and ceiling panels contained the fire spread during the 30-minute test. Smoke was driven into the enclosure primarily through the ventilation grille in the door and through the gaps between the bifold door and the jamb where the door distorted from the heat earlier in the test. The interior of the lavatory was almost completely destroyed by the fire.

Kourtides, D. A.↗

NASA NTRS1976

Deployable radiators for waste heat dissipation from Shuttle payloads

Prototypes of two types of modularized, deployable radiator systems with a high degree of configuration and component commonality to minimize design, development and fabrication costs are currently under development for Shuttle payloads with high waste heat: a rigid radiator system which utilizes aluminum honeycomb panels that are deployed by a scissors mechanism; and two 'flexible' radiator systems which use panels constructed from flexible metal/dielectric composite materials that are deployed by 'unrolling' or 'extending' in orbit. Detail descriptions of these deployable radiator systems along with design and performance features are presented.

Cox, R. L.↗

NASA NTRS1977

The NASA Energy Conservation Program

Large energy-intensive research and test equipment at NASA installations is identified, and methods for reducing energy consumption outlined. However, some of the research facilities are involved in developing more efficient, fuel-conserving aircraft, and tradeoffs between immediate and long-term conservation may be necessary. Major programs for conservation include: computer-based systems to automatically monitor and control utility consumption; a steam-producing solid waste incinerator; and a computer-based cost analysis technique to engineer more efficient heating and cooling of buildings. Alternate energy sources in operation or under evaluation include: solar collectors; electric vehicles; and ultrasonically emulsified fuel to attain higher combustion efficiency. Management support, cooperative participation by employees, and effective reporting systems for conservation programs, are also discussed.

Gaffney, G. P.↗

NASA NTRS1982

Producing Cryolite From Waste Sodium Fluoride

Simple chemical process makes synthetic cryolite by utilizing byproducts of one kind of silicon production process. Potential result of commercialization could be economic benefit to silicon industry or to aluminum industry, in which cryolite is used as flux.

Bartlett, R. W.↗

NASA NTRS1994

Catalytic ignitor for regenerative propellant gun

An ignitor initiates combustion of liquid propellant in a gun by utilizing a heated catalyst onto which the liquid propellant is sprayed in a manner which mitigates the occurrence of undesirable combustion chamber oscillations. The heater heats the catalyst sufficiently to provide the activation necessary to initiate combustion of the liquid propellant sprayed thereonto. Two embodiments of the ignitor and three alternative mountings thereof within the combustion chamber are disclosed. The ignitor may also be utilized to dispose of contaminated, excess, or waste liquid propellant in a safe, controlled, simple, and reliable manner.

Voecks, Gerald E.↗

NASA NTRS1997

Catalytic Ignitor for Regenerative Propellant Gun

An ignitor initiates combustion of liquid propellant in a gun by utilizing a heated catalyst onto which the liquid propellant is sprayed in a manner which mitigates the occurrence of undesirable combustion chamber oscillations. The heater heats the catalyst sufficiently to provide the activation necessary to initiate combustion of the liquid propellant sprayed thereonto. Two embodiments of the igniter and three alternative mountings thereof within the combustion chamber are disclosed. The ignitor may also be utilized to dispose of contaminated, excess, or waste liquid propellant in a safe, controlled, simple, and reliable manner.

Voecks, Gerald E.↗

DOE OSTI2022

Impact of Tree Age and Anatomical Fraction on Forest Residue Pyrolysis and Hydrotreating

Utilization of cost-advantaged biomass and waste resources to produce clean, domestic biofuels will be a key factor in decarbonizing transportation in the United States. This study investigates how the distribution of anatomical fractions (stem wood, bark, needles, branches) from pine forest residues of different ages impacts pyrolysis and hydrotreating processes, including product composition, carbon efficiency, economics, and overall sustainability. Commercially sourced 13- and 23-year-old loblolly pine residues were chosen to represent available resources; whole tree thinnings, and tops and branches from merchantable timber, respectively. Detailed characterization of the residue samples, product distributions, bio-oil, char, and gas characterization data are presented for 13 experiments, including the individual fractions, blends, and air-classified samples to reduce ash content. Pyrolysis mass balances averaged 97 +/- 3%. As expected, bio-oil yields were lower for the bark, needles, and blends with high proportions of these (53-56% dry basis), and highest for the debarked stem wood (67-71% dry basis). Lower yields were attributed to the high ash content of the needles, but also to the high lignin content in the bark (>50%), which is hypothesized to have led to increased char formation during pyrolysis. Higher-oil yield was generally correlated with total volatiles, hydrogen, oxygen, glucan, and mannan; somewhat correlated with xylan and acetyl content; and negatively correlated with total carbon, fixed carbon, nitrogen, sulfur, and extractives. Air classification of the residues was effective in reducing ash content (1.5% to 0.64%), extractives (~7% to 2%), and sulfur (0.04% to 0.02%), resulting in a small increase in yield, a significant increase in the GC-detectable proportion of oil (27% to 34%) and a net economic benefit. These experimental results were used to conduct technoeconomic and life cycle analyses, which are also summarized here.

biofuels↗

DOE OSTI2022

TCF High Efficiency Anaerobic Electroporation

09 BIOMASS FUELS↗

DOE OSTI2023

TCF High Efficiency Anaerobic Electroporation (CRADA Final Report)

The Joint BioEnergy Institute (JBEI) researchers were co-inventors of the technology that will be used on this project and have developed a more current version of the chip and controller. JBEI will also assist with the design of the pathways and implementation of pathways on the chip. LanzaTech has developed novel gas fermentation technology that captures and utilizes greenhouse gases for production of fuels and chemicals. In contrast to traditional fermentation that uses sugars as substrate (and releases CO2 as a byproduct), gas fermentation utilizes C1 substrates carbon monoxide (CO) or CO2. This enables a diverse range of feedstock options including waste gases from industrial sources (e.g., steel mills and processing plants) or syngas generated from any biomass resource (e.g., agricultural waste, municipal solid waste, or organic industrial waste). Biomass is then gasified, allowing for maximum yields and complete carbon utilization including the recalcitrant lignocellulosic fraction that cannot be utilized in traditional sugar fermentation. To maximize the value that can be added to the array of gas resources that the LanzaTech process can use as an input, LanzaTech has pioneered genetic modification of acetogens and developed a comprehensive set of genetic tools to perform routine strain modification, including genome editing tools as CRISPR/Cas9 and libraries of validated genetic parts as promoters and terminators. Using this platform, production of over 50 new molecules have been demonstrated directly from gas. For a few selected molecules production rates and yields have been optimized and surpass production of native producers and engineered E. coli or yeast strains, but a higher throughput approach for combinatorial optimization of pathways is required to further advance synthesis of additional products in parallel.

09 BIOMASS FUELS↗

NASA NTRS2015

An Innovative Very Low Thermal Power Waste Heat Recovery System for Thermal Control of Deep Space Missions: A Thermal Flask in Space

Future missions to deep space, such as those to the outer planets (Jupiter, Saturn, etc.), which would rely on solar photovoltaic power, would need extremely large solar arrays to produce sufficient power for their operations because solar intensity is so low at those locations. Hence any additional power that would be needed for thermal control is extremely limited. Previous deep space missions like Juno (to Jupiter) required almost 200 W of electrical power for thermal control. This is prohibitively large for many future mission concepts, and leads to them needing very large solar arrays. For Saturn, where the solar flux is 1/4th the flux at Jupiter, this would entail an extremely large increase in the solar array size to accommodate the need for thermal survival power, which would be prohibitively large in size and mass, and very expensive. Hence there is a need to come up with a thermal architecture and design options that would not need such prohibitively large thermal power levels. One solution relies on harvesting the pre-existing waste heat from all the heat dissipation that would be present from operation of electronics, instruments, etc. for their own functionality. For example, for a generic Saturn mission, the various electronics would already dissipate about 200 Watts of heat that is simply "thrown away" to space from the spacecraft surfaces. The amount of thermal power that would be required for the safe thermal control of components within the spacecraft in deep space would be roughly of this magnitude for this class of spacecraft. So it makes good sense to try to harvest the waste heat and employ it to maintain the temperatures of all the components within their allowable limits. In particular, propulsion systems typically need to be kept above their freezing limits, around room temperature (15 C). Electronics needs to be kept typically above -40 C and batteries above -20 C. The next question becomes how to harvest this waste heat and direct it to the components that would need it for their survival. The proposed system utilizes a mechanically pumped, single phase fluid loop to pick up the waste heat from components attached to this loop's tubing and then directed to a thermal flask that has tubing attached to it. The thermal flask is cylindrically shaped and contains essentially all systems and components in the spacecraft within it, with the exception of the solar array, antennae, thrusters and various apertures of instruments, etc. to allow them an unobstructed view of space. Waste heat from the heat-dissipating components warms up the fluid and is carried to the flask surface and deposited on it via the fluid loop's flow. The entire flask is covered with Multi-Layered Insulation (MLI) to minimize the heat loss from the flask and allow it to remain warm. Hence the flask essentially creates a thermal environment within which the spacecraft components reside. The temperature of the components within the flask is then essentially the same as the temperature of the flask. This approach could be a very enabling feature for deep space missions. This paper describes the approach utilized for this thermal architecture, along with its mechanical and implementation aspects. Additionally it will compare and contrast this approach with the more conventional solutions utilized earlier.

Bhandari, Pradeep↗

DOE OSTI2025

Chemical Recycling of Plastic Waste to Higher Value Lubricants

The aim of this project was to develop scalable methods to convert plastic waste to petrochemical-equivalent feedstocks and demonstrate their utility in lubricant base oil and wax applications. These objectives were partially accomplished, by scaling up the synthesis of platinum-on-strontium titanate catalysts to twenty gram batches, scaling up the conversion of plastic waste to twenty-five grams of plastic, producing high-melt waxes and characterizing their properties, and demonstrating the purification of high-melt waxes. High-melt waxes are one petrochemical-equivalent feedstock that can be made from plastic waste, consisting of a hard wax with a melt point above 65 C. They are used as ingredients in hot melt adhesives, coatings, and cosmetics. Producing a petrochemical-equivalent feedstock from plastic waste provides an advantage in lower carbon footprint and manufacturing cost, as the waste feedstock costs less than crude oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Development of Acoustic Backscatter for In Situ Monitoring of Nuclear Sludge Wastes During Transfer - 20117

This paper presents an overview into the use of acoustic backscatter systems (ABS) for the in situ characterization of nuclear waste sludge concentration, size and aggregation, highlighting key achievements from the University of Leeds. Previous projects funded through the Engineering and Physical Sciences Research Council (EPSRC) UK and Innovate UK are firstly reviewed and linked to current research within the new TRANSCEND consortium. Detailed are a number of developments at various stages of technology readiness level, from the use of ABS to monitor small-scale sludge settling in columns, to large-scale jet-mixing and waste transfer operations. Current work with Sellafield Ltd will see new technology and world leading analysis methods deployed to measure the consolidation of complex wastes currently undergoing containment, the first time full industrial utilization of these systems has been achieved. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

SRNL Sludge Batch 10 Qualification SRAT and SME Off-Gas Results

Savannah River National Laboratory (SRNL) completed a small-scale demonstration of the Defense Waste Processing Facility (DWPF) Chemical Process Cell (CPC) utilizing the nitric-glycolic acid (NGA) flowsheet to support Sludge Batch 10 (SB10) qualification. The demonstration utilized a Tank 51 slurry sample washed by SRNL (with added H-canyon material). The purpose of this document is to report the observed off-gas results from the demonstration. With the NGA flowsheet, DWPF has a CPC hydrogen generation limit of 2.4×10 -2 lb/h. The peak observed rate was nearly 90 times less than that limit during SRNL testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

MAKING CEMENT AT AMBIENT TEMPERATURE USING 55% MUNICIPAL SOLID WASTE ASH

Explore the source record for details and available documents.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Economic Perspectives of Biogas Production via Anaerobic Digestion

As the demand for utilizing environment-friendly and sustainable energy sources is increasing, the adoption of waste-to-energy technologies has started gaining attention. Producing biogas via anaerobic digestion (AD) is promising and well-established; however, this process in many circumstances is unable to be cost competitive with natural gas. In this research, we provide a technical assessment of current process challenges and compare the cost of biogas production via the AD process from the literature, Aspen Plus process modeling, and CapdetWorks software. We also provide insights on critical factors affecting the AD process and recommendations on optimizing the process. We utilize four types of wet wastes, including wastewater sludge, food waste, swine manure, and fat, oil, and grease, to provide a quantitative assessment of theoretical energy yields of biogas production and its economic potential at different plant scales. Our results show that the cost of biogas production from process and economic models are in line with the literature with a potential to go even lower for small-scale plants with technological advancements. This research illuminates potential cost savings for biogas production using different wastes and guide investors to make informed decisions, while achieving waste management goals.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Food resources affect territoriality of invasive wild pig sounders with implications for control

Abstract Interest in control methods for invasive wild pigs ( Sus scrofa ) has increased due to their range expansion, population growth, and an improved understanding of their destructive ecological and economic effects. Recent technological advances in traps for control of pig populations facilitate capture of entire social groups (sounders), but the efficacy of “whole-sounder” trapping strategies is heavily dependent on the degree of territoriality among sounders, a topic little research has explored. We assessed territoriality in wild pig sounders on the Savannah River Site, South Carolina, USA, and examined whether availability of food resources provided by a municipal-waste landfill affected among-sounder territoriality. We estimated utilization distribution overlap and dynamic interactions among 18 neighboring sounders around a landfill. We found that although neighboring sounders overlapped in space, intensity of use in shared areas was uniformly low, indicating territorial behavior. Neighbors tended to share slightly more space when closer to the landfill waste cells, indicating availability of a super-abundant resource somewhat weakens the degree of territoriality among sounders. Nevertheless, we conclude that sounders behaved in a generally territorial manner, and we discuss implications for whole-sounder trapping programs, particularly near concentrated resources such as landfills and crop fields.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2023

Shear Assisted Processing and Extrusion (ShAPE) of Plastics: Recycling and Remolding

Polyethylene (PE) and polypropylene (PP) are often disposed as mixed plastic wastes. The challenges in recycling and upcycling these mixed polyolefin wastes lie in the difficulty in separating individual constituents in a cost-effective and scalable manner. Direct recycling the mixed PE and PP wastes in conventional melt-phase extruders typically result in a product with poor properties and low added value, because of immiscibility, phase separation, and lack of crystallinity. Friction extrusion (FE), a solid phase processing technique that has successfully extruded metal matrix composites with desired end products, has never been utilized to address the issue of recycling mixed plastic wastes. In this study, FE was performed on single-stream low-density polyethylene (LDPE), single-stream PP and mixed-stream LDPE+PP. Consolidated filaments of 2.5 mm diameter were extruded from different precursors. The thermal, infrared, and microscopic properties of extruded filaments were measured to evaluate the effects of FE process on the structure of recycled polymers. Meanwhile, the energy efficiency of FE was estimated based on extrusion rates and compared with conventional melt extrusion processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗