Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMPLITUDE MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Discovery of a 4.2 hour X-ray period in GX 9+9

The low-mass X-ray binary GX 9+9 (4U 1728-16) was observed during September 13-19, 1977, and March 11-17, 1978, with the HEAO A-1 instrument in scanning mode. An algorithm for detecting periodicities in the resulting light curves has been applied; it is based on the Scargle periodogram and takes into account the non-Gaussian nature of the intrinsic source variability. A 4.19 + or - 0.02 hr periodic modulation is detected in the September 1977 data. The folded light curve shows sinusoidal modulation with an amplitude of 3.8 percent. This amplitude is comparable to the 4.6 percent residual intrinsic source variability at all phases of the light curve. The 4.19 hr period is interpreted as the binary period of the system. The lack of eclipses and the sinusoidal light curve imply that the binary system is viewed at a low inclination angle of less than about 63 deg. Light curves of this type may be relatively common among low-mass X-ray binaries, but are difficult to detect without the long observations and high sensitivity possible with HEAO A-1.

Hertz, Paul↗
NASA NTRS1989

Ultraviolet variability of the solar analogue star Alpha Centauri A

Fifty-seven observations of the solar analogue Alpha Centauri A made by the IUE over a 3-year interval have been examined for variability. It is found that the UV continuum flux of this star in the 1715- to 1915-A range varies by as much as 19 percent. However, nearly all of this range in variability can occur within one stellar rotation period. Consequently, if Alpha Cen A undergoes a stellar activity cycle similar to that of the sun, the results indicate that the amplitude of this modulation is small, contrary to recently proposed empirical (theoretical) models of solar activity.

Sofia, Ulysses J.↗
NASA NTRS1991

Investigation of air transportation technology at Ohio University, 1990-1991

The status of the Joint University Program is given. Brief synopsis of some areas of research follow. The study of spectrum efficient methods for transmitting weather information to aircraft has resulted in definition of an improved amplitude and phase modulation process which permits reutilization of voice channels for both voice and data. The system is being implemented for testing. Multisensor navigation systems introduce increased flexibility and performance for aviation, at the expense of increased complexity. Insuring a high level of system reliability and integrity requires that faults not only be detected, but also isolated to specific elements, so that the remaining capabilities of the system may be used with confidence. An algorithm was developed. The JUP has served as a vehicle for reporting work accomplished in evoked potential vision tracking experiments to determine the engineering parameters of this input and control method. Application of GPS in an interferometric mode permits accurate measurement of differential motion; aircraft attitude may be determined using GPS only, with multiple antennas.

Lilley, Robert W.↗
NASA NTRS1993

On the verification of the planetary system around PSR 1257 + 12

The magnitude and nature of residuals expected in the times of pulsar arrival (TOA) of the millisecond pulsar PSR 1257 + 12 as a function of the observational time span is estimated so that an observing progam may be planned to optimize the detection of a perturbation signature of a possible planetary system. The numerical and analytic procedures for evaluating the residuals are described. Calculations results are given in which a recognizable signature is shown to be a modulation of the amplitude of the TOA residual differences as a function of both epoch and observational interval. A supplementary approach involving intensive closely spaced observations over selected time intervals to find the time of a particular zero crossing of the TOA residuals is also discussed.

Peale, S. J.↗
NASA NTRS1995

Investigation of air transportation technology at Ohio University: 1993-1994

The Joint University Program (JUP) offers students, faculty, and staff of the Avionics Engineering Center the opportunity to conduct basic research relating to the safety and efficiency of the National Airspace System. During the 1993-1994 year research was continued in a variety of GPS-related technologies and also in a hybrid data uplink system. (1) Processing techniques developed for the GPS attitude determination have been applied to centimeter-level kinematic GPS aircraft positioning for flight reference systems and aircraft autoland and taxiing operations. This resulted in the first real-time kinematic GPS autoland. (2) The fault detection and isolation (FDI) algorithm developed under the Joint University Program has been fully adopted by RTCA Special Committee 159 as the baseline algorithm for sole-means navigation of GPS integrated with GLONASS, LORAN-C, or baro-altimeter. (3) A Satellite Coverage Research Analysis Model (SCRAM) has been developed which provides outage areas, outage dynamics, and availability information for satellite-based navigation systems. RTCA Special Committee 159 has adopted this model for use in their work. (4) A basic receiver structure has been simulated and tested for use with the hybrid data uplink. This uplink utilizes the phase of an existing AM carrier to transmit digital data, thus both amplitude and phase modulation are applied, resulting in a hybrid carrier. The receiver simulation is directly applicable to real-time implementation as a result of the development platform.

Lilley, Robert W.↗
NASA NTRS1997

On the Role of Resonances in Nonradial Pulsators

Resonances or near resonances are ubiquitous among the excited nonradial pulsation modes of variable stars and they must play an important role in determining their pulsational behavior. Here in a first step at nonlinear asteroseismology, we explore some of the consequences of resonances by means of the amplitude equation formalism. We show how parity and angular momentum constraints can be used to eliminate many of the possible nonlinear resonant couplings between modes (and multiplets of modes), and how the amplitude equations can thus be simplified. Even when we may not be able, nor wish, to make an ab initio computation of the values of the coupling coefficients, it is still possible to obtain constraints on the nature of the excited modes if a resonance between observed frequencies can be identified. Resonances can cause nonlinear frequency locking of modes. This means that the observed frequencies appear in exact resonance even though the linear frequencies are only approximately in resonance. The nonlinear frequency lock, when it occurs, it does so over a range of departures from linear resonance, and it is accompanied by constant pulsation amplitudes. The locked, nonlinear frequencies can differ noticeably from their nonresonant counterparts which are usually used in seismology. This is particularly true for multiplets of modes split by rotation. Beyond the regime of the frequency lock, amplitude and frequency modulations can appear in the pulsations. Far from the resonance condition one recovers the regime of steady pulsations with nonresonant frequencies for which the seismological studies, as they are presently carried out, are justified (provided furthermore, of course, that nonlinear frequency shifts are negligible). Success in identifying a resonance in an observed power spectrum depends on the quality of the data. While keeping this limitation in mind, ew discuss the possible existence of peculiar resonances the pulsations specific variable white dwarfs and delta Scuti stars.

Buchler, J. R.↗
NASA NTRS2001

A stochastic differential equation model of diurnal cortisol patterns

Circadian modulation of episodic bursts is recognized as the normal physiological pattern of diurnal variation in plasma cortisol levels. The primary physiological factors underlying these diurnal patterns are the ultradian timing of secretory events, circadian modulation of the amplitude of secretory events, infusion of the hormone from the adrenal gland into the plasma, and clearance of the hormone from the plasma by the liver. Each measured plasma cortisol level has an error arising from the cortisol immunoassay. We demonstrate that all of these three physiological principles can be succinctly summarized in a single stochastic differential equation plus measurement error model and show that physiologically consistent ranges of the model parameters can be determined from published reports. We summarize the model parameters in terms of the multivariate Gaussian probability density and establish the plausibility of the model with a series of simulation studies. Our framework makes possible a sensitivity analysis in which all model parameters are allowed to vary simultaneously. The model offers an approach for simultaneously representing cortisol's ultradian, circadian, and kinetic properties. Our modeling paradigm provides a framework for simulation studies and data analysis that should be readily adaptable to the analysis of other endocrine hormone systems.

NASA Discipline Space Human Factors↗
NASA NTRS2003

Non-Linear Structural Dynamics Characterization using a Scanning Laser Vibrometer

This paper presents the use of a scanning laser vibrometer and a signal decomposition method to characterize non-linear dynamics of highly flexible structures. A Polytec PI PSV-200 scanning laser vibrometer is used to measure transverse velocities of points on a structure subjected to a harmonic excitation. Velocity profiles at different times are constructed using the measured velocities, and then each velocity profile is decomposed using the first four linear mode shapes and a least-squares curve-fitting method. From the variations of the obtained modal \ielocities with time we search for possible non-linear phenomena. A cantilevered titanium alloy beam subjected to harmonic base-excitations around the second. third, and fourth natural frequencies are examined in detail. Influences of the fixture mass. gravity. mass centers of mode shapes. and non-linearities are evaluated. Geometrically exact equations governing the planar, harmonic large-amplitude vibrations of beams are solved for operational deflection shapes using the multiple shooting method. Experimental results show the existence of 1:3 and 1:2:3 external and internal resonances. energy transfer from high-frequency modes to the first mode. and amplitude- and phase- modulation among several modes. Moreover, the existence of non-linear normal modes is found to be questionable.

Pai, P. F.↗
NASA NTRS2009

Polarimetric Imaging using Two Photoelastic Modulators

A method of polarimetric imaging, now undergoing development, involves the use of two photoelastic modulators in series, driven at equal amplitude but at different frequencies. The net effect on a beam of light is to cause (1) the direction of its polarization to rotate at the average of two excitation frequencies and (2) the amplitude of its polarization to be modulated at the beat frequency (the difference between the two excitation frequencies). The resulting modulated optical light beam is made to pass through a polarizing filter and is detected at the beat frequency, which can be chosen to equal the frame rate of an electronic camera or the rate of sampling the outputs of photodetectors in an array. The method was conceived to satisfy a need to perform highly accurate polarimetric imaging, without cross-talk between polarization channels, at frame rates of the order of tens of hertz. The use of electro-optical modulators is necessitated by a need to obtain accuracy greater than that attainable by use of static polarizing filters over separate fixed detectors. For imaging, photoelastic modulators are preferable to such other electrio-optical modulators as Kerr cells and Pockels cells in that photoelastic modulators operate at lower voltages, have greater angular acceptances, and are easier to use. Prior to the conception of the present method, polarimetric imaging at frame rates of tens of hertz using photoelastic modulators was not possible because the resonance frequencies of photoelastic modulators usually lie in the range from about 20 to about 100 kHz.

Wang, Yu↗
NASA NTRS2010

Measuring Cyclic Error in Laser Heterodyne Interferometers

An improved method and apparatus have been devised for measuring cyclic errors in the readouts of laser heterodyne interferometers that are configured and operated as displacement gauges. The cyclic errors arise as a consequence of mixing of spurious optical and electrical signals in beam launchers that are subsystems of such interferometers. The conventional approach to measurement of cyclic error involves phase measurements and yields values precise to within about 10 pm over air optical paths at laser wavelengths in the visible and near infrared. The present approach, which involves amplitude measurements instead of phase measurements, yields values precise to about .0.1 microns . about 100 times the precision of the conventional approach. In a displacement gauge of the type of interest here, the laser heterodyne interferometer is used to measure any change in distance along an optical axis between two corner-cube retroreflectors. One of the corner-cube retroreflectors is mounted on a piezoelectric transducer (see figure), which is used to introduce a low-frequency periodic displacement that can be measured by the gauges. The transducer is excited at a frequency of 9 Hz by a triangular waveform to generate a 9-Hz triangular-wave displacement having an amplitude of 25 microns. The displacement gives rise to both amplitude and phase modulation of the heterodyne signals in the gauges. The modulation includes cyclic error components, and the magnitude of the cyclic-error component of the phase modulation is what one needs to measure in order to determine the magnitude of the cyclic displacement error. The precision attainable in the conventional (phase measurement) approach to measuring cyclic error is limited because the phase measurements are af-

Ryan, Daniel↗
NASA NTRS2009

Digital Beamforming Scatterometer

This paper discusses scatterometer measurements collected with multi-mode Digital Beamforming Synthetic Aperture Radar (DBSAR) during the SMAP-VEX 2008 campaign. The 2008 SMAP Validation Experiment was conducted to address a number of specific questions related to the soil moisture retrieval algorithms. SMAP-VEX 2008 consisted on a series of aircraft-based.flights conducted on the Eastern Shore of Maryland and Delaware in the fall of 2008. Several other instruments participated in the campaign including the Passive Active L-Band System (PALS), the Marshall Airborne Polarimetric Imaging Radiometer (MAPIR), and the Global Positioning System Reflectometer (GPSR). This campaign was the first SMAP Validation Experiment. DBSAR is a multimode radar system developed at NASA/Goddard Space Flight Center that combines state-of-the-art radar technologies, on-board processing, and advances in signal processing techniques in order to enable new remote sensing capabilities applicable to Earth science and planetary applications [l]. The instrument can be configured to operate in scatterometer, Synthetic Aperture Radar (SAR), or altimeter mode. The system builds upon the L-band Imaging Scatterometer (LIS) developed as part of the RadSTAR program. The radar is a phased array system designed to fly on the NASA P3 aircraft. The instrument consists of a programmable waveform generator, eight transmit/receive (T/R) channels, a microstrip antenna, and a reconfigurable data acquisition and processor system. Each transmit channel incorporates a digital attenuator, and digital phase shifter that enables amplitude and phase modulation on transmit. The attenuators, phase shifters, and calibration switches are digitally controlled by the radar control card (RCC) on a pulse by pulse basis. The antenna is a corporate fed microstrip patch-array centered at 1.26 GHz with a 20 MHz bandwidth. Although only one feed is used with the present configuration, a provision was made for separate corporate feeds for vertical and horizontal polarization. System upgrades to dual polarization are currently under way. The DBSAR processor is a reconfigurable data acquisition and processor system capable of real-time, high-speed data processing. DBSAR uses an FPGA-based architecture to implement digitally down-conversion, in-phase and quadrature (I/Q) demodulation, and subsequent radar specific algorithms. The core of the processor board consists of an analog-to-digital (AID) section, three Altera Stratix field programmable gate arrays (FPGAs), an ARM microcontroller, several memory devices, and an Ethernet interface. The processor also interfaces with a navigation board consisting of a GPS and a MEMS gyro. The processor has been configured to operate in scatterometer, Synthetic Aperture Radar (SAR), and altimeter modes. All the modes are based on digital beamforming which is a digital process that generates the far-field beam patterns at various scan angles from voltages sampled in the antenna array. This technique allows steering the received beam and controlling its beam-width and side-lobe. Several beamforming techniques can be implemented each characterized by unique strengths and weaknesses, and each applicable to different measurement scenarios. In Scatterometer mode, the radar is capable to.generate a wide beam or scan a narrow beam on transmit, and to steer the received beam on processing while controlling its beamwidth and side-lobe level. Table I lists some important radar characteristics

Rincon, Rafael F.↗
NASA NTRS1996

Modulation of vergence by off-vertical yaw axis rotation in the monkey: normal characteristics and effects of space flight

Horizontal movements of both eyes were recorded simultaneously using scleral search coils in 2 rhesus monkeys before and after the COSMOS 2229 space-flight of 1992-1993. Another 9 monkeys were tested at comparable time intervals and served as controls. Ocular vergence, defined as the difference in horizontal position between the left and right eyes, was measured during off-vertical yaw axis rotation (OVAR) in darkness. Vergence was modulated sinusoidally as a function of head position with regard to gravity during OVAR. The amplitude of peak-to-peak modulation increased with increments in tilt of the angle of the rotational axis (OVAR tilt angle) that ranged from 15 degrees to 90 degrees. Of the 11 monkeys tested, 1 had no measurable modulation in vergence. In the other 10, the mean amplitude of the peak to peak modulation was 5.5 degrees +/- 1.3 degrees at 90 degrees tilt. Each of these monkeys had maximal vergence when its nose was pointed close to upward (gravity back; mean phase: -0.9 degree +/- 26 degrees). After space flight, the modulation in vergence was reduced by over 50% for the two flight monkeys, but the phase of vergence modulation was not altered. The reduction in vergence modulation was sustained for the 11-day postflight testing period. We conclude that changes in vergence are induced in monkeys by the sinusoidal component of gravity acting along the naso-occipital axis during yaw axis OVAR, and that the modulation of the vergence reflex is significantly less sensitive to linear acceleration after space flight.

Flight Experiment↗
NASA NTRS1992

Cosmic ray modulation near the onset and maximum phases of solar activity cycle 22

Using data obtained with neutron monitors we study the cosmic-ray modulation of the five-year developmental phase of solar activity cycle (SAC) 22. The main characteristics of the observed modulation are compared with those of cycle 19. The similarities and differences between the two cycles are noted. The data indicate that the amplitude of the observed modulation is larger at higher and lower primary rigidities than that for cycle 19, which still remains the most active cycle. The lowest ever monthly-mean counting rates were obtained in June 1991. Even so, based upon our prior experience, we expect the recovery of the cosmic ray intensity in SAC 22 to follow the pattern observed for cycles 20 and 18, rather than that for cycle 19.

Ahluwalia, H. S.↗
NASA NTRS1974

The design of a device for hearer and feeler differentiation, part A

A speech modulated white noise device is reported that gives the rhythmic characteristics of a speech signal for intelligible reception by deaf persons. The signal is composed of random amplitudes and frequencies as modulated by the speech envelope characteristics of rhythm and stress. Time intensity parameters of speech are conveyed through the vibro-tactile sensation stimuli.

Creecy, R.↗
NASA NTRS1993

On the Effects of a Spacecraft Subcarrier Unbalanced Modulator

This paper presents mathematical models with associated analysis of the deleterious effects which a spacecraft's subcarrier unbalanced modulator has on the performance of a phase-modulated residual carrier communications link. The undesired spectral components produced by the phase and amplitude imbalances in the subcarrier modulator can cause (1) potential interference to the carrier tracking and (2) degradation in the telemetry bit signal-to-noise ratio (SNR). A suitable model for the unbalanced modulator is developed and the threshold levels of undesired components that fall into the carrier tracking loop are determined. The distribution of the carrier phase error caused by the additive White Gaussian noise (AWGN) and undesired component at the residual RF carrier is derived for the limiting cases. Further, this paper analyses the telemetry bit signal-to-noise ratio degradations due to undesirable spectral components as well as the carrier tracking phase error induced by phase and amplitude imbalances. Numerical results which indicate the sensitivity of the carrier tracking loop and the telemetry symbol-error rate (SER) to various parameters of the models are also provided as a tool in the design of the subcarrier balanced modulator.

Nguyen, Tien Manh↗
NASA NTRS1993

Performance results of a 300-degree linear phase modulator for spaceborne communications applications

A phase modulator capable of large linear phase deviation, low loss, and wide band operation with good thermal stability was developed for deep space spacecraft transponder (DST) applications at X-band (8.415 GHz) and Ka-band (32 GHz) downlinks. The design uses a two-stage circulator-coupled reflection phase shifter with constant gamma hyperabrupt varactors and an efficient modulator driver circuit to obtain a phase deviation of +/-2.5 rad with better than 8 percent linearity. The measured insertion loss is 6.6 dB +/- 0.35 dB at 8415 MHz. Measured carrier and relative sideband amplitudes resulting from phase modulation by sine wave and square modulating functions agree well with the predicted results.

Mysoor, N. R.↗
NASA NTRS1993

Performance results of a 300-deg linear phase modulator for spaceborne communications applications

A phase modulator capable of large linear phase deviation, low loss, and wide band operation with good thermal stability was developed for deep space spacecraft transponder (DST) applications at X-band (8.415 GHz) and Ka-band (32 GHz) downlinks. The design uses a two-stage circulator-coupled reflection phase shifter with constant gamma hyperabrupt varactors and an efficient modulator driver circuit to obtain a phase deviation of +/- 2.5 rad with better than 8 percent linearity. The measured insertion loss is 6.6 dB +/- 0.35 dB at 8415 MHz. Measured carrier and relative sideband amplitudes resulting from phase modulation by sine wave and square modulating functions agree well with the predicted results.

Mysoor, Narayan R.↗
NASA NTRS1973

Evaluation of ERTS-1 image sensor spatial resolution in photographic form

The author has identified the following significant results. A coherent optical system was used to display the spatial frequency content of the amplitude image of one area of the ground as obtained in the four wavelength bands of the multispectral scanner. This enabled a rapid comparison to be made between the four bands, from which it was clear that bands 5 and 7 were preferred to the others in terms of image definition, and thus mapping and acreage estimation, for the particular agricultural area imaged. With suitable scaling it was also possible to compare the modulation, as a function of spatial frequency, of MSS bands 4 and 5 with the green (BB) and red (DD) bands of the same area from the Apollo 9, SO65 experiment. A significant result is that the modulation in the MSS amplitude imagery is 65%-90% of that in the Apollo 9 amplitude imagery. In addition, the ratio of spatial frequencies for the ERTS-1 and Apollo imagery, at which the same modulation occurs, lies between 0.55 and 0.75 for the red band. This ratio is closely related to the ratio of resolutions for the two sensors. These values corroborate statements that the resolution of the MSS imagery is better than anticipated by pre-flight predictions.

Slater, P. N.↗