SEARCH · Search NASA

Results for “Adaptive Measures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS2001

Variable practice with lenses improves visuo-motor plasticity

Novel sensorimotor situations present a unique challenge to an individual's adaptive ability. Using the simple and easily measured paradigm of visual-motor rearrangement created by the use of visual displacement lenses, we sought to determine whether an individual's ability to adapt to visuo-motor discordance could be improved through training. Subjects threw small balls at a stationary target during a 3-week practice regimen involving repeated exposure to one set of lenses in block practice (x 2.0 magnifying lenses), multiple sets of lenses in variable practice (x 2.0 magnifying, x 0.5 minifying and up-down reversing lenses) or sham lenses. At the end of training, adaptation to a novel visuo-motor situation (20-degree right shift lenses) was tested. We found that (1) training with variable practice can increase adaptability to a novel visuo-motor situation, (2) increased adaptability is retained for at least 1 month and is transferable to further novel visuo-motor permutations and (3) variable practice improves performance of a simple motor task even in the undisturbed state. These results have implications for the design of clinical rehabilitation programs and countermeasures to enhance astronaut adaptability, facilitating adaptive transitions between gravitational environments.

NASA Discipline Neuroscience↗

NASA NTRS2019

Modeling the near-field ionospheric disturbances during earthquakes

We present the latest development of the Wave Perturbation-Global Ionosphere-Thermosphere Model (WP-GITM), a threedimensional physics-based numerical model for seismic/tsunami-ionosphere coupling via atmospheric acoustic-gravity waves. WP-GITM was previously applied to simulate the ionospheric perturbations resulted from the epicentral crustal movement by assuming spherical acoustic-gravity waves originated from a point source, which was specified by the seismic measurement at a single location nearby the epicenter. In this work, we extend WP-GITM to include the effects of Rayleigh surface waves and adapt WP-GITM to utilize seismic measurements from more than one location in the attempt to capture the radiation pattern of the seismic source. We apply the new WP-GITM to model the near-field co-seismic ionospheric perturbations during the 16 September 2015 Illapel earthquake. The comparison between the simulated ionospheric total electron content perturbations and the GPS observations shows promising results.

Ravanelli, Michela↗

DOE OSTI2025

Machine learning for arbitrary single-qubit rotations on an embedded device

Here, in this study, we present a technique for using machine learning (ML) for single-qubit gate synthesis on field-programmable logic for a superconducting transmon-based quantum computer based on simulated studies. Our approach is multi-stage. We first “bootstrap” a model based on simulation with access to the full state vector for measuring gate fidelity. We next present an algorithm, named adapted randomized benchmarking (ARB), for fine-tuning the gate on hardware based on measurements of the devices. We also present techniques for deploying the model on programmable devices with care to reduce the required resources. While the techniques here are applied to a transmon-based computer, many of them are portable to other architectures.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1979

Making real-time sun reflectance measurements with a microprocessor-based spectroradiometer

A standard high-speed, field-portable spectroradiometric measurement system built around a programmable microprocessor has been adapted to the form of a Reflectometer/Comparator. In this configuration, the instrument makes passive measurements of the absolute reflectance of agricultural plant canopies over a spectral range of 0.4 to 2.5 micrometers. Real-time absolute measurements are made possible by an optical chopper which constantly compares the target with the sun, and makes extensive measurements of solar reflectance from a variety of these targets. The paper describes the instrumentation and measurement procedures, reviews the software programming and discusses the results.

Zweibaum, F. M.↗

NASA NTRS1990

Adaptive state estimation for control of flexible structures

This paper proposes a new approach of obtaining adaptive state estimation of a system in the presence of unknown system disturbances and measurement noise. In the beginning, a non-optimal Kalman filter with arbitrary initial guess for the process and measurement noises is implemented. At the same time, an adaptive transversal predictor (ATP) based on the recursive least-squares (RLS) algorithm is used to yield optimal one- to p- step-ahead output predictions using the previous input/output data. Referring to these optimal predictions the Kalman filter gain is updated and the performance of the state estimation is thus improved. If forgetting factor is implemented in the recursive least-squares algorithm, this method is also capable of dealing with the situation when the noise statistics are slowly time-varying. This feature makes this new approach especially suitable for the control of flexible structures. A numerical example demonstrates the feasibility of this real time adaptive state estimation method.

Chen, Chung-Wen↗

NASA NTRS1992

Measuring Spatially Varying Transmittance Of A Filter

Focusing/collimating-and-scanning apparatus adapts spectro-photometer to spectral transmittance of optical filter as function of position on filter. Mounted in sample chamber of spectrophotometer. All-reflective microscope objectives focus quasi-collimated light onto desired spot and recollimate diverging light emerging from filter. Measurements made in infrared, visible, or ultraviolet.

Labaw, Clayton C.↗

NASA NTRS1975

An implementable digital adaptive flight controller designed using stabilized single stage algorithms

Simple mechanical linkages have not solved the many control problems associated with high performance aircraft maneuvering throughout a wide flight envelope. One procedure for retaining uniform handling qualities over such an envelope is to implement a digital adaptive controller. Towards such an implementation an explicit adaptive controller which makes direct use of on-line parameter identification, has been developed and applied to both linearized and nonlinear equations of motion for a typical fighter aircraft. This controller is composed of an on-line weighted least squares parameter identifier, a Kalman state filter, and a model following control law designed using single stage performance indices. Simulation experiments with realistic measurement noise indicate that the proposed adaptive system has the potential for on-board implementation.

Kaufman, H.↗

NASA NTRS1984

Survey of ONERA activities on adaptive-wall applications and computation of residual corrections

The research undertaken concerning the computation and/or reduction of wall interference follows two main axes: improvement of wall correction determinations, and use of adaptive flexible walls. The use of wall-measured data to compute interference effects is reliable when the model representation is assessed by signatures with known boundary conditions. When the computed interferences are not easily applicable to correcting the results (especially for gradients in two-dimensional cases), the flexible adaptive walls in operation in T2 are an efficient and assessed means of reducing the boundary effects to a negligible level, if the direction and speed of the flow are accurately measured on the boundary. The extension of the use of adaptive walls to three-dimensional cases may be attempted since the residual corrections are assumed to be small and are computable.

Chevallier, J. P.↗

NASA NTRSDate not supplied

Developing Technologies for Biological Experiments in Deep Space

NASA Ames Research Center is the leader in developing autonomous nanosatellites or CubeSats to address strategic knowledge gaps about the effects of space travel on biological organisms, including GeneSat, PharmaSat, and EcAMSat. Now that NASA has set its sights on human exploration in deep space, such missions require significant technological and biomedical countermeasures to protect astronauts from chronic radiation exposure. CubeSats can inform these countermeasures by querying relevant space environments with model organisms and/or biosensors. BioSentinel will be the first interplanetary CubeSat to study the biological response to space radiation outside low Earth orbit in almost 50 years. BioSentinel is an autonomous platform able to support biology and to investigate the effects of space radiation on a model organism in interplanetary deep space. It will fly onboard Artemis-1, from which it will be deployed on a lunar fly-by trajectory and into a heliocentric orbit. BioSentinel, a 6U CubeSat (1U = 10-cm cube), will measure the DNA damage response to ambient space radiation in a model organism, which will be compared to information provided by an onboard radiation spectrometer and to data obtained on the ISS and on Earth. Even though the primary objective of the mission is to develop an autonomous spacecraft capable of conducting biological experiments in deep space, the 4U BioSensor science payload contained within the free-flyer is an adaptable instrument that can perform bio measurements with different microorganisms and in multiple space environments, including the ISS, lunar gateway, and on the surface of the Moon. Thus, nanosatellites like BioSentinel can be used to study the effects of both reduced gravity and space radiation and can house different organisms to answer specific science questions. In addition to their flexibility, nanosatellites also provide a low-cost alternative to more complex and larger missions, and require minimal crew support, if any

biosenses↗

NASA NTRSDate not supplied

Developing Technologies for Biological Experiments in Deep Space

biosenses↗

NASA NTRSDate not supplied

BioSentinel - ISS mission

BioSentinel will be the first interplanetary CubeSat to study the biological response to space radiation outside low Earth orbit in almost 50 years. BioSentinel is an autonomous platform able to support biology and to investigate the effects of space radiation on a model organism in interplanetary deep space. It will fly onboard Artemis-1, from which it will be deployed on a lunar fly-by trajectory and into a heliocentric orbit. BioSentinel, a 6U CubeSat (1U = 10-cm cube), will measure the DNA damage response to ambient space radiation in a model organism, which will be compared to information provided by an onboard radiation spectrometer and to data obtained on the ISS and on Earth. Even though the primary objective of the mission is to develop an autonomous spacecraft capable of conducting biological experiments in deep space, the 4U BioSensor science payload contained within the free-flyer is an adaptable instrument that can perform bio measurements with different microorganisms and in multiple space environments, including the ISS. Thus, nanosatellites like BioSentinel can be used to study the effects of both reduced gravity and space radiation and can house different organisms to answer specific science questions. In addition to their flexibility, nanosatellites also provide a low-cost alternative to more complex and larger missions, and require minimal crew support, if any

space biosensors↗

NASA NTRS1991

Adaptive control of propellant slosh for a launch vehicle with multiple tanks

This paper discusses the use of an adaptive system to stabilize a multi-tank launch vehicle with sloshable fuel. The adaptive system utilizes a sensor to measure the fluid slosh angle, a recursive-least-squares estimator to estimate the natural frequency of the sloshing fuel, and a linear filter which stabilizes the unstable fuel slosh using the frequency estimate. Single-input and multiinput estimators were investigated. The time-varying complexity of the slosh control loop keeps the system persistently excited through flight, even though the attitude is controlled by a conventional PID controller. For the first portion of flight, the adaptive system maintains stability. A modification is proposed for latter portions of flight. The approach requires no tank baffles or partitions.

Saugen, John D.↗

NASA NTRS1999

Real-Time Parameter Estimation in the Frequency Domain

A method for real-time estimation of parameters in a linear dynamic state space model was developed and studied. The application is aircraft dynamic model parameter estimation from measured data in flight for indirect adaptive or reconfigurable control. Equation error in the frequency domain was used with a recursive Fourier transform for the real-time data analysis. Linear and nonlinear simulation examples and flight test data from the F-18 High Alpha Research Vehicle HARV) were used to demonstrate that the technique produces accurate model parameter estimates with appropriate error bounds. Parameter estimates converged in less than 1 cycle of the dominant dynamic mode natural frequencies, using control surface inputs measured in flight during ordinary piloted maneuvers. The real-time parameter estimation method has low computational requirements, and could be implemented aboard an aircraft in real time.

Morelli, Eugene A.↗

NASA NTRS2022

Vision-based Velocimetry over Unknown Terrain with a Low-Noise IMU

This paper presents a novel approach to terrain-relative navigation with a visual camera and Inertial Measurement Unit (IMU). The proposed algorithm uses an Extended Kalman Filter (EKF) to combine an IMU propagated state estimate with batch correction estimates computed over a sliding window of measurements. The batch correction algorithm follows the Maximum Likelihood Estimation (MLE) approach used in other Bundle Adjustment systems. Unlike other systems, the proposed system parameterizes the state over the entire window in terms of the state at a single epoch. By ignoring IMU error over the window duration, we obtain a state epoch MLE that jointly estimates the epoch state and terrain parameters with drastically reduced computationally cost. This paper presents the general architecture which can be adapted for various state parameterizations and measurement inputs. For space applications with high-accuracy IMUs, the reduction in computational cost comes with only a modest increase in estimation errors. The increase in error is quantified via a linear covariance analysis presented in this paper. Furthermore, we present simulation results which show the applicability of this algorithm to planetary landing problems.

San Martin, A. Miguel↗

NASA NTRS2012

Compact Two-step Laser Time-of-Flight Mass Spectrometer for in Situ Analyses of Aromatic Organics on Planetary Missions

RATIONALE A miniature time-of-flight mass spectrometer has been adapted to demonstrate two-step laser desorption-ionization (LOI) in a compact instrument package for enhanced organics detection. Two-step LDI decouples the desorption and ionization processes, relative to traditional laser ionization-desorption, in order to produce low-fragmentation conditions for complex organic analytes. Tuning UV ionization laser energy allowed control ofthe degree of fragmentation, which may enable better identification of constituent species. METHODS A reflectron time-of-flight mass spectrometer prototype measuring 20 cm in length was adapted to a two-laser configuration, with IR (1064 nm) desorption followed by UV (266 nm) postionization. A relatively low ion extraction voltage of 5 kV was applied at the sample inlet. Instrument capabilities and performance were demonstrated with analysis of a model polycyclic aromatic hydrocarbon, representing a class of compounds important to the fields of Earth and planetary science. RESULTS L2MS analysis of a model PAH standard, pyrene, has been demonstrated, including parent mass identification and the onset o(tunable fragmentation as a function of ionizing laser energy. Mass resolution m/llm = 380 at full width at half-maximum was achieved which is notable for gas-phase ionization of desorbed neutrals in a highly-compact mass analyzer. CONCLUSIONS Achieving two-step laser mass spectrometry (L2MS) in a highly-miniature instrument enables a powerful approach to the detection and characterization of aromatic organics in remote terrestrial and planetary applications. Tunable detection of parent and fragment ions with high mass resolution, diagnostic of molecular structure, is possible on such a compact L2MS instrument. Selectivity of L2MS against low-mass inorganic salt interferences is a key advantage when working with unprocessed, natural samples, and a mechanism for the observed selectivity is presented.

Getty, Stephanie↗

NASA NTRS2005

Exposure to a Rotating Virtual Environment During Treadmill Locomotion Causes Adaptation in Heading Direction

The goal of the present study was to investigate the adaptive effects of variation in the direction of optic flow, experienced during linear treadmill walking, on modifying locomotor trajectory. Subjects (n = 30) walked on a motorized linear treadmill at 4.0 kilometers per hour for 24 minutes while viewing the interior of a 3D virtual scene projected onto a screen 1.5 in in front of them. The virtual scene depicted constant self-motion equivalent to either 1) walking around the perimeter of a room to one s left (Rotating Room group) 2) walking down the center of a hallway (Infinite Hallway group). The scene was static for the first 4 minutes, and then constant rate self-motion was simulated for the remaining 20 minutes. Before and after the treadmill locomotion adaptation period, subjects performed five stepping trials where in each trial they marched in place to the beat of a metronome at 90 steps/min while blindfolded in a quiet room. The subject's final heading direction (deg), final X (for-aft, cm) and final Y (medio-lateral, cm) positions were measured for each trial. During the treadmill locomotion adaptation period subject's 3D torso position was measured. We found that subjects in the Rotating Room group as compared to the Infinite Hallway group: 1) showed significantly greater deviation during post exposure testing in the heading direction and Y position opposite to the direction of optic flow experienced during treadmill walking 2) showed a significant monotonically increasing torso yaw angular rotation bias in the direction of optic flow during the treadmill adaptation exposure period. Subjects in both groups showed greater forward translation (in the +X direction) during the post treadmill stepping task that differed significantly from their pre exposure performance. Subjects in both groups reported no perceptual deviation in position during the stepping tasks. We infer that viewing simulated rotary self-motion during treadmill locomotion causes adaptive modification of sensory-motor integration in the control of position and trajectory during locomotion which functionally reflects adaptive changes in the integration of visual, vestibular, and proprioceptive cues. Such an adaptation in the control of position and heading direction during locomotion due to the congruence of sensory information demonstrates the potential for adaptive transfer between sensorimotor systems and suggests a common neural site for the processing and self-motion perception and concurrent adaptation in motor output. This will result in lack of subjects perception of deviation of position and trajectory during the post treadmill step test while blind folded.

Ruttley, T↗

NASA NTRS2005

Exposure to a Rotating Virtual Environment During Treadmill Locomotion Causes Adaptation in Heading Direction

The goal of the present study was to investigate the adaptive effects of variation in the direction of optic flow, experienced during linear treadmill walking, on modifying locomotor trajectory. Subjects (n = 30) walked on a motorized linear treadmill at 4.0 km/h for 24 minutes while viewing the interior of a 3D virtual scene projected onto a screen 1.5 m in front of them. The virtual scene depicted constant self-motion equivalent to either 1) walking around the perimeter of a room to one s left (Rotating Room group) 2) walking down the center of a hallway (Infinite Hallway group). The scene was static for the first 4 minutes, and then constant rate self-motion was simulated for the remaining 20 minutes. Before and after the treadmill locomotion adaptation period, subjects performed five stepping trials where in each trial they marched in place to the beat of a metronome at 90 steps/min while blindfolded in a quiet room. The subject s final heading direction (deg), final X (for-aft, cm) and final Y (medio-lateral, cm) positions were measured for each trial. During the treadmill locomotion adaptation period subject s 3D torso position was measured. We found that subjects in the Rotating Room group as compared to the Infinite Hallway group: 1) showed significantly greater deviation during post exposure testing in the heading direction and Y position opposite to the direction of optic flow experienced during treadmill walking 2) showed a significant monotonically increasing torso yaw angular rotation bias in the direction of optic flow during the treadmill adaptation exposure period. Subjects in both groups showed greater forward translation (in the +X direction) during the post treadmill stepping task that differed significantly from their pre exposure performance. Subjects in both groups reported no perceptual deviation in position during the stepping tasks. We infer that 3 viewing simulated rotary self-motion during treadmill locomotion causes adaptive modification of sensory-motor integration in the control of position and trajectory during locomotion which functionally reflects adaptive changes in the integration of visual, vestibular, and proprioceptive cues. Such an adaptation in the control of position and heading direction during locomotion due to the congruence of sensory information demonstrates the potential for adaptive transfer between sensorimotor systems and suggests a common neural site for the processing and self-motion perception and concurrent adaptation in motor output. This will result in lack of subjects perception of deviation of position and trajectory during the post treadmill step test while blind folded.

Mulavara, A. P.↗

DOE OSTI2024

Adaptively remeshed multiphysical modeling of resistance forge welding with experimental validation of residual stress fields and measurement processes

Welding processes used in the production of pressure vessels impart residual stresses in the manufactured component. Computational modeling is critical to predicting these residual stress fields and understanding how they interact with notches and flaws to impact pressure vessel durability. Here, in this work, we present a finite element model for a resistance forge weld and validate it using laboratory measurements. Extensive microstructural changes, near-melt temperatures, and large localized deformations along the weld interface pose significant challenges to Lagrangian finite element modeling. The proposed modeling approach overcomes these roadblocks in order to provide a high-fidelity simulation that can predict the residual stress state in the manufactured pressure vessel; a rich microstructural constitutive model accounts for material recrystallization dynamics, a frictional-to-tied contact model is coordinated with the constitutive model to represent interfacial bonding, and adaptive remeshing is employed to alleviate severe mesh distortion. An interrupted-weld approach is applied to the simulation to facilitate comparison to displacement measures. Several techniques are employed for residual stress measurement in order to validate the finite element model: neutron diffraction, the contour method, and the slitting method. Model-measurement comparisons are supplemented with detailed simulations that reflect the configurations of the residual-stress measurement processes themselves. The model results show general agreement with experimental measurements, and we observe some similarities in the features around the weld region. Factors that contribute to model-measurement differences are identified. Finally, we conclude with some discussion of the model development and residual stress measurement strategies, including how to best leverage the efforts put forth here for other weld problems.

36 MATERIALS SCIENCE↗