Search NASA⌕ Search

SEARCH · Search NASA

Results for “Altimetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Seasonal variability of the Gulf Stream from satellite altimetry

The nearly continuous 3.5 years of altimeter data in the western North Atlantic Ocean from the GEOS 3 mission (April 1975 to November 1978) have been used to study the seasonal variability of the Gulf Stream. The differences between altimetric measurements of sea surface height made at satellite ground track intersections, called crossovers, are utilized to construct time series of sea level variations. The results indicate that the Gulf Stream in the region off Cape Hatteras has a pronounced seasonal variability. The peak-to-peak amplitude of the seasonal cycle in terms of cross-stream sea level difference is about 15 cm, with a maximum in April and a minimum in December. The result is in good agreement with historic hydrographic observations and recent direct measurements of the Gulf Stream. The mechanisms responsible for the observed seasonal variability are discussed.

Fu, Lee-Lueng↗

Gravity model development for precise orbit computations for satellite altimetry

Two preliminary gravity models developed as a first step in reaching the TOPEX/Poseidon modeling goals are discussed. They were obtained by NASA-Goddard from an analysis of exclusively satellite tracking observations. With the new Preliminary Gravity Solution-T2 model, an improved global estimate of the field is achieved with an improved description of the geoid.

Marsh, James G.↗

Error assessments of widely-used orbit error approximations in satellite altimetry

From simulations, the orbit error can be assumed to be a slowly varying sine wave with a predominant wavelength comparable to the Earth's circumference. Thus, one can derive analytically the error committed in representing the orbit error along a segment of the satellite ground track by a bias; by a bias and tilt (linear approximation); or by a bias, tilt, and curvature (quadratic approximation). The result clearly agrees with what is obvious intuitively, i.e., (1) the fit is better with more parameters, and (2) as the length of the segment increases, the approximation gets worse. But more importantly, it provides a quantitative basis to evaluate the accuracy of past results and, in the future, to select the best approximation according to the required precision and the efficiency of various approximations.

Tai, Chang-Kou↗

Tidal estimation in the Pacific with application to SEASAT altimetry

The techniques for computing the eigenfunctions of the velocity potential (Proudman functions) set out in Sanchez, et al. (1986) in relation to the Atlantic-Indian Oceans are here applied to the Pacific Ocean, using a 6x6 degree grid of 510 points (455 points for the associated stream functions). Normal modes are computed from the first Proudman functions and have natural periods from 43.9h downward. Tidal syntheses are derived from these modes by direct application of the (frictionless) dynamic equations and by least-squares fitting of Proudman functions to the dynamically interpolated tide-gauge data of Schwiderski (1983). The modes contributing the most energy to the principal harmonic tidal constituents are different in the two computations: their natural periods are typically in the range of 9 to 16h for semidiurnal, and 14 to 43h for diurnal tides. The rms of fit for the Proudman functions is, in all cases, better than the corresponding value for the same number of spherical harmonics.

Sanchez, Braulio V.↗

A review of sea-state bias in altimetry

The accuracy of satellite altimetric measurements of sea level is limited in part by the influence by ocean waves on the altimeter signal reflected from the sea surface. This error, termed the sea-state bias, is poorly known; yet, for such altimetric satellite missions as Topex/Poseidon, it is the largest source of error exclusive of those resulting from calculation of the satellite's ephemeris. Previous observations of sea-state bias have had a large, apparently random scatter, in the range of 1-5 percent of significant wave height; and the observations are not consistent with theoretical calculations of the bias. Further theoretical and experimental studies will be required for understanding the error with an accuracy required by future altimetric satellite missions.

Stewart, Robert↗

Advanced altimetry

The radar altimeter being developed for the Ocean Topography Experiment (TOPEX) will have an inherent instrument precision of 2 to 3 cm. While some minor refinements may be possible in the future, major geophysical advances could be made if altimetric measurements over a wide swath of the Earth's surface were possible. The NASA Headquarters Oceanic Processes Branch is supporting a 3-year investigation of the technological issues inherent in the precision measurement of topography from spaceborne platforms at angles off-nadir. To explore the off-nadir measurement of topography, a flexible, airborne radar instrument system is being developed. Its hardware design is now complete, and it is made up of several subsystems. The antenna selected is a dielectric lens of .894 m diameter. The RF subsystem uses phase-locked oscillators, FET solid-state amplifiers, and times four frequency multipliers to develop a transmit signal at a frequency of 36.0 GHz and a local oscillator signal at a frequency of 35.4 GHz. Lecroy 6880 digitizers under computer control digitize the five receiver outputs. The digital subsystem consists of six single-board Heurikon processors. At this time, the instrument construction continues with final system integration planned for November 1988.

Parsons, C. L.↗

Earth Observing System (EOS) advanced altimetry

In the post-TOPEX era, satellite radar altimeters will be developed with the capability of measuring the earth's surface topography over a wide swath of coverage, rather than just at the satellite's nadir. The identification of potential spacecraft flight missions in the future was studied. The best opportunity was found to be the Earth Observing System (EOS). It is felt that an instrument system that has a broad appeal to the earth sciences community stands a much better chance of being selected as an EOS instrument. Consequently, the Topography and Rain Radar Imager (TARRI) will be proposed as a system that has the capability to profile the Earth's topography regardless of the surface type. The horizontal and height resolutions of interest are obviously significantly different over land, ice, and water; but, the use of radar to provide an all-weather observation capability is applicable to the whole earth. The scientific guidance for the design and development of this instrument and the eventual scientific utilization of the data produced by the TARRI will be provided by seven science teams. The teams are formed around scientific disciplines and are titled: Geology/Geophysics, Hydrology/Rain, Oceanography, Ice/Snow, Geodesy/Orbit/Attitude, Cartography, and Surface Properties/Techniques.

Parsons, C. L.↗

Observing oceanic mesoscale eddies from Geosat altimetry - Preliminary results

Mesoscale eddies constitute the most energetic component of the variability of ocean currents. Sea level variations measured by the Geosat radar altimeter are used to study the spatial and temporal scales of the eddy motion. An attempt is also made to map the temporal evolution of the eddy field in the region of the Agulhas Current south of Africa, where the eddy motions are among the strongest in the world. The results demonstrate that Geosat has provided an unprecedented opportunity to map from space the temporal evolution of sea level variability associated with the energetic eddies in the ocean.

Fu, Lee-Lueng↗

Laser altimetry measurements from aircraft and spacecraft

The techniques involved in the design and application of laser altimeter instruments are reviewed, including a description of the instrument subsystems required for the range and waveform measurements. Laser pulse transmitters based on the relatively novel technology of diode-pumped solid-state lasers are considered. Various factors affecting laser altimeter instrument performance are discussed. These include the receiver signal-to-noise ratio, atmospheric propagation, and altimeter platform effects. Some examples of laser altimeter data are presented to illustrate the variety of possible instrument applications.

Bufton, Jack L.↗

Pulse compression and sea level tracking in satellite altimetry

An account is given of the pulse-compression technique, in which a radar altimeter transmits a relatively long pulse and processes the returned signal in a way equivalent to transmitting a very short one and measuring the returned power in a sequence of range gates. The effective short pulse enhances the range resolution that would be obtained from the actual long pulse. Pulse compression and sea-level tracking are important to the overall error budget for altimetric estimates of sea level. Attention is presently given to the high degree of accuracy required for the NASA TOPEX altimeter scheduled for launch in mid-1992.

Chelton, Dudley B.↗

Radar altimetry of large Martian craters

A total of 108 13-cm wavelength scans conducted for the 23 to -22 deg latitude regions of Mars during the 1971-1982 oppositions are of sufficiently high resolution to allow elevation differences of as much as 3 km over less than 10 deg longitude to be observed; most of this local relief is furnished by structural elements of impact craters. The data set has allowed identification of 152 complex degraded craters, some as small as 25 km diameter. Measured crater depths rarely exceed 2.5 km, and low exterior relief rather than overall low relief seems to be the distinguishing characteristic of large degraded craters. Processes other than fluvial sedimentation appear to have contributed to crater shallowing.

Roth, L. E.↗

Satellite radar altimetry over ice. Volume 1: Processing and corrections of Seasat data over Greenland

The data-processing methods and ice data products derived from Seasat radar altimeter measurements over the Greenland ice sheet and surrounding sea ice are documented. The corrections derived and applied to the Seasat radar altimeter data over ice are described in detail, including the editing and retracking algorithm to correct for height errors caused by lags in the automatic range tracking circuit. The methods for radial adjustment of the orbits and estimation of the slope-induced errors are given.

Zwally, H. Jay↗

Satellite radar altimetry over ice. Volume 2: Users' guide for Greenland elevation data from Seasat

A gridded surface-elevation data set and a geo-referenced data base for the Seasat radar altimeter data over Antarctica are described. It is intended to be a user's guide to accompany the data provided to data centers and other users. The grid points are on a polar stereographic projection with a nominal spacing of 20 km. The gridded elevations are derived from the elevation data in the geo-referenced data base by a weighted fitting of a surface in the neighborhood of each grid point. The gridded elevations are useful for the creating smaller-scale contour maps, and examining individual elevation measurements in specific geographic areas. Tape formats are described, and a FORTRAN program for reading the data tape is listed and provided on the tape.

Zwally, H. Jay↗

Satellite radar altimetry over ice. Volume 4: Users' guide for Antarctica elevation data from Seasat

A gridded surface-elevation data set and a geo-referenced data base for the Seasat radar altimeter data over Greenland are described. This is a user guide to accompany the data provided to data centers and other users. The grid points are on a polar stereographic projection with a nominal spacing of 20 km. The gridded elevations are derived from the elevation data in the geo-referenced data base by a weighted fitting of a surface in the neighborhood of each grid point. The gridded elevations are useful for the creating of large-scale contour maps, and the geo-referenced data base is useful for regridding, creating smaller-scale contour maps, and examinating individual elevation measurements in specific geographic areas. Tape formats are described, and a FORTRAN program for reading the data tape is listed and provided on the tape.

Zwally, H. Jay↗

Analysis of altimetry over inland seas

Satellite-based altimetric data taken by GEOS-3 and SEASAT over the Black Sea and Caspian Sea are analyzed and a least squares collocation technique is used to predict the geoid undulation on a .25-degree by .25-degree grid and to transform these geoid undulations to free air gravity anomalies. This project entailed processing satellite altimeter data over inland seas for recovery of area mean gravity information. Gravity information in this area of the world is not readily available, so the possibility of obtaining it from the processing of altimeter observations is attractive. The principal objective was to complete and extend analyses done in a previous study, verify those results, and document the results and techniques. A secondary objective was to improve the algorithms and results, if possible. The approach used involved editing geoid height data to remove overland data; evaluating geoid height differences at crossover points; removing orbit errors from geoid heights using crossover differences; gridding geoid height data at .25-degree by .25-degree intervals; and estimating the gravity anomalies from gridded geoid heights using the collocation technique.

Au, A. Y.↗

Surface topography of the Greenland Ice Sheet from satellite radar altimetry

Surface elevation maps of the southern half of the Greenland subcontinent are produced from radar altimeter data acquired by the Seasat satellite. A summary of the processing procedure and examples of return waveform data are given. The elevation data are used to generate a regular grid which is then computer contoured to provide an elevation contour map. Ancillary maps show the statistical quality of the elevation data and various characteristics of the surface. The elevation map is used to define ice flow directions and delineate the major drainage basins. Regular maps of the Jakobshavns Glacier drainage basin and the ice divide in the vicinity of Crete Station are presented. Altimeter derived elevations are compared with elevations measured both by satellite geoceivers and optical surveying.

Bindschadler, Robert A.↗

Evolution of the eastern Indian Ocean since the Late Cretaceous - Constraints from Geosat altimetry

A model of the tectonic evolution of the eastern Indian Ocean from the Late Cretaceous to the present is constructed. Reinterpretations of seafloor magnetic anomalies are used to place constraints on spreading rates and the timing of major reorganizations. Vertical deflection profiles from 22 repeat cycles of Geosat altimeter data are used to determine the tectonic fabric associated with fracture zones. The Geosat data place constraints on paleospreading directions. Consideration is given to the implications of the model for the relative motions between India, Australia, and Antarctica.

Royer, Jean-Yves↗