Search NASA⌕ Search

SEARCH · Search NASA

Results for “Barrier properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Renewable Ammonia as An Energy Fuel for Ocean Exploration and Transportation

Renewable power generated from wave energy has faced technological and cost barriers to entry into utility-scale electricity markets. As an alternative, the production of chemical fuels, such as ammonia (NH3) which has high energy density (11.5 MJ/L) and facile storage properties, may open wave energy to new markets including ocean exploration and transportation. The electrochemical method has been studied to synthesize NH3 from air and water at ambient conditions. Based on some recent work on the electrochemical synthesis of NH3, it is possible to achieve an overall conversion efficiency of 10% from wave energy to NH3 through an electrochemical reaction between air and water. If all the recoverable wave energy in the United States (1170 TWh/yr) is used to produce renewable NH3 fuel replacing hydrocarbon fuels, this can help reduce over 300 million tons of CO2 emission every year. Several potential application scenarios at sea have been proposed for renewable NH3 fuel including production and storage for marine shipping and seasonal energy storage for Arctic exploration. Liquefied NH3 has much higher energy density, both gravimetric and volumetric, than a variety of batteries but the energy efficiency of NH3 is lower than modern batteries such as Li-ion. The Levelized cost of storing NH3 prepared using electric energy is less than $0.2/kWh and the storage time can exceed 10,000 hours which indicates that NH3 can be a promising energy storage solution to make use of abundant wave energy. However, there are some safety and environmental concerns involved in the usage of NH3 at sea. The challenges in the electrochemical catalyst for the NH3 synthesis and how molecular simulation may help to screen electrocatalyst with high efficiency and selectivity were also briefly discussed.

Liu, Jian↗
DOE OSTI2024

On the Emergence of Ferromagnetism in LaCoO 3 Ultrathin Films

It is well known that the properties of a crystal evolve as it increases in size from a single atomic plane to that of the bulk. Such size-dependent transitions can stem from many different origins and depend on minute changes to crystal bonding and composition. Here, a model example is that of LaCoO 3 , which is non-magnetic in the bulk but can display ferromagnetism at the nanoscale. Here, the evolution of structure-property relationships is studied in the LaCoO 3-δ /SrTiO 3 (001) system as the thickness of LaCoO 3-δ is increased from a single plane to 10 unit cells. In situ synchrotron X-ray studies are performed during and post-deposition to probe changes in the interactions between structure, stoichiometry, and magnetic behavior. Structural quantification indicates that the oxygen octahedral rotation pattern evolves with thickness, due to inherent differences in crystal symmetry between the film and substrate. The change in rotation modifies the required energy barrier for the spin state transition via the Co–O bond length and Co–O–Co bond angle, affecting the appearance of ferromagnetism. Our results highlight the contributions of high spin Co 2+ and/or high spin Co 3+ to respective weak and robust ferromagnetism and the evolution of properties with size in ultrathin LaCoO 3-δ heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Alternating-bias assisted annealing of amorphous oxide tunnel junctions

Superconducting quantum bits (qubits) rely on ultra-thin, amorphous oxide tunneling barriers that can have significant inhomogeneities and defects as grown. This can result in relatively large uncertainties and deleterious effects in the circuits, limiting the scalability. Finding a robust solution to the junction reproducibility problem has been a long-standing goal in the field. Here, we demonstrate a transformational technique for controllably tuning the electrical properties of aluminum-oxide tunnel junctions. This is accomplished using a low-voltage, alternating-bias applied individually to the tunnel junctions, with which resistance tuning by more than 70% can be achieved. The data indicates an improvement of coherence and reduction of two-level system defects. Transmission electron microscopy shows that the treated junctions are predominantly amorphous, albeit with a more uniform distribution of alumina coordination across the barrier. This technique is expected to be useful for other devices based on ionic amorphous materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Lanthanide transport in angstrom-scale MoS 2 -based two-dimensional channels

Rare earth elements (REEs), critical to modern industry, are difficult to separate and purify, given their similar physicochemical properties originating from the lanthanide contraction. Here, we systematically study the transport of lanthanide ions (Ln 3+ ) in artificially confined angstrom-scale two-dimensional channels using MoS 2 -based building blocks in an aqueous environment. The results show that the uptake and permeability of Ln 3+ assume a well-defined volcano shape peaked at Sm 3+ . This transport behavior is rooted from the tradeoff between the barrier for dehydration and the strength of interactions of lanthanide ions in the confinement channels, reminiscent of the Sabatier principle. Molecular dynamics simulations reveal that Sm 3+ , with moderate hydration free energy and intermediate affinity for channel interaction, exhibit the smallest dehydration degree, consequently resulting in the highest permeability. Our work not only highlights the distinct mass transport properties under extreme confinement but also demonstrates the potential of dialing confinement dimension and chemistry for greener REEs separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly Insulated Wall Systems with Exterior Insulation of Polyisocyanurate under Different Facer Materials: Material Characterization and Long-Term Hygrothermal Performance Assessment

The application of exterior insulation in both new construction and retrofits is a common practice to enhance the energy efficiency of buildings. In addition to increased thermal performance, the rigid insulation can serve to keep the sheathing board warm and serve as a water-resistive barrier to keep moisture-related problems due to condensation and wind-driven rain. Polyisocyanurate (PIR) rigid boards have a higher thermal resistance in comparison to other commonly used exterior insulation boards. However, because of its perceived lower permeance, its use as exterior insulation is not very common. In this study, the hygrothermal property of PIR boards with different facer types and thicknesses is characterized. The material data obtained through experimental test and extrapolation is used in a long term hygrothermal performance assessment of a wood frame wall with PIR boards as exterior insulation. Results show that PIR with no facer has the smallest accumulated moisture on the sheathing board in comparison to other insulation boards. Walls with a bigger thickness of exterior insulation perform better when no vapor barrier is used. The PIR exterior insulation supports the moisture control strategy well in colder climates in perfect wall scenarios, where there is no air leakage and moisture intrusion. In cases where there is trapped moisture, the sheathing board has a higher moisture content with PIR boards with both aluminum or fiberglass type facers. An innovative facer material development for PIR boards can help efforts targeting improved energy-efficient and durable wall systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adsorption Hysteresis Under Control: Tuning Host–Guest Interactions via a Genetic Algorithm

Mesoporous adsorbent materials offer a large volumetric capacity; however, cyclic adsorption/desorption processes in these systems often suffer from hysteresis and may require a significant pressure swing to access this capacity. To mitigate hysteresis, a proposed strategy is to include nucleation sites on the walls of the mesoporous material to facilitate droplet and bubble formation, lowering the free energy barriers to the respective phase transitions. It is unclear, however, what combination of adsorbate− adsorbent interactions and spatial patterning would be beneficial for a given application, considering that improvements to some sorption properties may come at the expense of other attributes. To understand these interconnected observables, we examine two model systems, planar-slit and cylindrical pores with tunable interaction sites, using GPU-accelerated transition matrix Monte Carlo simulations. The simulations provide a free energy map of the pressure−adsorption space in a matter of minutes, which we use to track adsorption isotherm characteristics as a function of adsorbent properties. We then leverage the rapid acquisition of simulation data to construct a genetic algorithm to iteratively modify interaction sites of the slit-pore wall to minimize the hysteresis of this system without sacrificing uptake. We find that the adsorption branch of the isotherm is easily modulated via the average host−guest interaction strength, but desorption is only adjustable if there is a suitable bubble nucleation site. Within the context of a slit-pore system, we identify relative interaction strengths and patch sizes required to gain control over both branches of the hysteresis loop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Planar Defect Layers Template a High-Pressure InBi Polymorph

The short- and long-range order of III–V materials under high pressure has long been the subject of debate, with advancements in structural characterization leading to significant revisions to the accepted structural models. Despite these revisions, previous high-pressure structural assignments in the In–Bi system include the site-disordered β-Sn structure type, a structure type demonstrated to be nonexistent in analogous III–V systems. While X-ray diffraction is consistent with site disordering in InBi at high pressure, cluster expansion calculations indicate that disordering requires temperatures above 3000 K. Here, we propose InBi as a model material for studying unique high-pressure planar defects due to its highly anisotropic stress-dependent properties and structure. Specifically, we identify two sets of planar defects that mimic the diffraction pattern of a site disordered β-Sn structure type and are compatible with the calculated disorder barrier. We derive these defects by symmetry relations over crystallographic transitions. Density functional theory calculations of the proposed defects suggest that these defects are stabilized by diminishing interlayer separations with pressure. Further, we find that one of the proposed defects closely resembles a bulk high-pressure phase of InBi, InBi-ϵ, and we assert that the proposed defects order upon heating, acting as a template for InBi-ϵ growth. The proposed defects and their electronic structure provide a basis for the trend of superconducting critical temperature with increasing pressure. These methods for identifying defects are generalizable to other materials with reports of site disorder at high pressure, prompting a broader search for related high-pressure defects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nonmagnetic fractional conductance in high mobility InAs quantum point contacts

In this paper, we report the magnetoelectronic properties of high mobility InAs quantum point contacts grown on InP substrates. The InAs quantum well is embedded between In 0.72 ⁢Ga 0.28 ⁢As cladding layers and In 0.81 ⁢Al 0.19 ⁢As barrier layers, and is populated via self-accumulation. The one-dimensional (1D) conductance reaches a maximum value of 17 plateaus, quantized in units of 2⁢𝑒 2 /ℎ, where 𝑒 is the fundamental unit of charge and ℎ is Planck's constant. The in-plane effective 𝑔 factor was estimated to be −10.9 ± 1.5 for subband 𝑁 = 1 and −10.8 ± 1.6 for subband 𝑁 = 2. Furthermore, a study of the nonmagnetic fractional conductance states at 0.2 (𝑒 2 /ℎ) and 0.1 (𝑒 2 /ℎ) is provided. While their origin remains under discussion, evidence suggests that they arise from strong electron-electron interactions and momentum-conserving backscattering between electrons in two distinct channels within the 1D region. This phenomenon may also be interpreted as an entanglement between the two channel directions facilitated by momentum-conserving backscattering.

Ballistic transport↗
DOE OSTI2024

Fluoropolymer Aging Phenomena

This project aims to investigate structural and morphological changes in fluoropolymers induced by both processing and aging phenomena such as heat, time, and irradiation. Fluoropolymers are an important class of thermoplastics that are broadly used in industry as o-rings and seals when chemical resistance and thermal performance are important. They are also often used in thin film geometries as binders in batteries, insulation layers, water barriers, and anti-fouling coatings. For all of these applications, mechanical integrity and aging are important aspects of their use. Changes in the crystalline morphology are known to impact the mechanical properties of the polymer and can lead to failure. The broad goals of this project are to correlate compositional changes, morphological changes, and mechanical changes. report focuses on the morphological changes that are correlated with nuclear magnetic resonance (NMR), calorimetry and mechanical testing. We plan to compare structure and morphology measurements across complementary bulk and surface techniques. We use in situ atomic force microscopy (AFM) to measure domain shape and crystallization kinetics; in situ NMR to measure crystalline composition; and differential scanning calorimetry (DSC) to measure melting temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Borehole Disposal: Update on the Science, Technology, and Potentially Suitable Radioactive Wastes - 20170

A recent Special Issue of the Energies Journal on Deep Borehole Disposal of Nuclear Waste has delivered a timely update on the science and technology of borehole disposal and the types of radioactive wastes it could potentially accommodate. The Special Issue papers discuss (i) circumstances under which a national waste management programme might wish to consider deep borehole disposal [1], (ii) a status report of deep borehole disposal options in Germany [2], (iii) the use of deep horizontal drill-holes in sedimentary, metamorphic or igneous rocks for disposal of spent nuclear fuel and high-level radioactive waste [3], (iv) the analysis of corrosion performance of engineered barrier systems [4], (v) a review of the potential cementing systems suitable for deep borehole disposal [5], (vi) the thermal evolution around heat-generating waste for a wide range of material properties and disposal configurations [6], (vii) a geochemical analysis of deep brines focussed on fluid-rock interactions [7], (viii) post-closure performance assessment calculations for deep borehole disposal of Cs/Sr capsules [8], and (ix) an example safety case for deep borehole disposal of nuclear wastes [9]. This paper provides an overview of the main findings from these publications and highlights some of the technological and scientific challenges that need to be overcome when developing a deep borehole disposal concept. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Mudstone Baffles and Barriers in Lower Cretaceous Strata at a Proposed CO 2 Storage Hub in Kemper County, Mississippi, United States

The Cretaceous and Tertiary deposits in Mississippi, Alabama, and the adjacent continental shelf constitute a widespread succession of sandstone, mudstone, and carbonate that has proven to be an important target for geologic CO 2 storage in the onshore Gulf of Mexico basin. Integrated analysis of stratigraphy, sedimentology, and reservoir properties based on cores and geophysical well logs indicates that the Paluxy Formation and Washita- Fredericksburg interval present gigatonne-class storage opportunities. The distribution, geometry, and composition of the area is a direct reflection of the original depositional environments, and understanding these factors is essential for understanding the geologic storage potential of the Paluxy Formation and Washita-Fredericksburg interval at the Kemper County energy facility in Mississippi. Geologic characterization of the Mississippi Embayment at the energy facility focused primarily on characterizing the confinement potential of the storage complex. Integration of core analyses and geophysical well logs has yielded a high-resolution stratigraphic analysis of storage reservoirs, baffles, barriers, and seals. Scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS), and quantitative X-ray diffraction (XRD) was used to characterize microfabric, pore types, and mineralogy within mudstone of the east-central Mississippi Embayment at the Kemper County energy facility. Mudstone beds in the Paluxy Formation and Washita-Fredericksburg interval have variable thickness and continuity. High water saturation in the Cretaceous mudstone units influences swelling smectite clay and mudrock permeability based on pulse decay analysis is 1–96 nD. These low permeability values indicate that the mudstone units are effective baffles, barriers, and confining intervals that make significant migration of injected CO 2 out of the storage complex unlikely. The numerous baffles and barriers within the target reservoir intervals, moreover, favor the retention of multiple CO 2 in plumes within the abundant stacked sandstone bodies.

03 NATURAL GAS↗
DOE OSTI2023

Andreev reflection at the altermagnet-superconductor interface

Altermagnets are a new class of magnetic materials, which exhibit large spin splitting, but due to the combined spin and real space group symmetry protection maintain zero net macroscopic magnetization. Such a characteristic may prove them to be superior in applications in superconducting heterostructures and thus here we investigate the Andreev reflection at the altermagnet/superconductor interface. We compare and contrast altermagnets to other magnetic materials, revealing qualitative differences in the behavior of altermagnetic junction depending on the Fermi surface orientation. We study the resonant states arising in setups with strong tunneling barriers and show that sensitivity to nonmagnetic disorder is also dependent on the orientation. In conclusion, our results provide a building block for altermagnetic superconducting heterostructures such as Josephson π junctions with superior properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Natural boundaries for scattering amplitudes

Singularities, such as poles and branch points, play a crucial role in investigating the analytic properties of scattering amplitudes that inform new computational techniques. In this note, we point out that scattering amplitudes can also have another class of singularities called natural boundaries of analyticity. They create a barrier beyond which analytic continuation cannot be performed. More concretely, we use unitarity to show that 2 \to 2 2 → 2 scattering amplitudes in theories with a mass gap can have a natural boundary on the second sheet of the lightest threshold cut. There, an infinite number of ladder-type Landau singularities densely accumulates on the real axis in the center-of-mass energy plane. We argue that natural boundaries are generic features of higher-multiplicity scattering amplitudes in gapped theories.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Near-Net-Shape HIP Manufacturing for sCO2 Turbomachinery Cost Reduction

sCO2 turbomachinery that operates above 650°C requires the use of γ' strengthened Ni-based superalloys, leading to high cost and barrier of market adoption. Near-net-shape (NNS) HIP manufacturing with 282® alloy powder is being developed for sCO2 turbine components, with a significant estimated cost reduction. Tensile, creep, low cycle fatigue properties of argon gas atomized and plasma atomized powders were evaluated and compared to sand cast HAYNES® 282®. While tensile strength and fatigue life outperformed sand cast material, a 10~25% debit in the creep stress capability was observed due to the fine grain size and presence of prior particle boundaries (PPBs). Finite element model calibrated by powder rheological properties accurately predicted the nonuniform shrinkage during HIP, providing HIP tooling design to achieve the target dimension. A 20 lbs. turbine nozzle ring was successfully demonstrated within 0.01 inch dimensional tolerance at the vanes. A 1700lbs. turbine casing with complex internal struts and manifolds was also demonstrated being close to the target dimension.

14 SOLAR ENERGY↗
DOE OSTI2025

Crystalline Order Yet Glass-Like Heat Transport Driven by Hidden Local Distortions as the Structural Origin of Ultralow Thermal Conductivity in AgErTe 2

Given their rich chemical diversity and the interplay among the p-, d-, and f-orbitals of chalcogens, transition metals, and lanthanides, respectively, rare-earth transition-metal chalcogenides exhibit a wide variety of structural, magnetic, and transport phenomena. As a result, they form a particularly appealing platform for investigating structure–property relationships, emergent electronic and magnetic behaviors, and thermal transport. Here we investigate AgErTe 2 as a model system to understand phonon-glass behavior in ordered crystalline solids, which establishes the design principles for thermal barrier coatings and next-generation thermoelectrics. The local bonding asymmetry and lattice softness suppress the inherently low lattice thermal conductivity, resembling the characteristics of amorphous materials. This suppression is significantly influenced by local off-centering of Ag atoms, which breaks lattice periodicity while maintaining global crystallinity. The presence of antibonding states just below the Fermi level, arising from Ag 4d and Te 5p orbital interactions, leads to lattice softening and destabilizes ideal tetrahedral coordination, resulting in a pseudo Jahn–Teller distortion. Furthermore, the coexistence of weaker, more polarizable Ag–Te bonds and stronger Er–Te bonds creates a complex vibrational landscape enriched with low-frequency modes and enhanced phonon scattering. A pronounced disparity in interatomic force constants gives rise to highly localized, low-energy optical phonons linked to Ag rattling. These flat vibrational modes exhibit strong coupling with transverse acoustic phonons, resulting in ultrashort phonon lifetimes and mean free paths approaching interatomic distances. These features collectively enhance phonon scattering across a broad range of length and energy scales. This work offers a framework for engineering suppressed thermal conductivity in crystalline systems without the introduction of alloying elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of heat treatments on superconducting properties and connectivity in K-doped BaFe2As2

Abstract Fe-based superconductors and in particular K-doped BaFe 2 As 2 (K-Ba122) are materials of interest for possible future high-field applications. However the critical current density ( J c ) in polycrystalline Ba122 is still quite low and connectivity issues are suspected to be responsible. In this work we investigated the properties of high-purity, carefully processed, K-Ba122 samples synthesized with two separate heat treatments at various temperatures between 600 and 825 °C. We performed specific heat characterization and T c -distribution analysis up to 16 T and we compared them with magnetic T c and J c characterizations, and transmission-electron-microscopy (TEM) microstructures. We found no direct correlation between the magnetic T c and J c , whereas the specific heat T c -distributions did provide valuable insights. In fact the best J c -performing sample, heat treated first at 750 °C and then at 600 °C, has the peak of the T c -distributions at the highest temperatures and the least field sensitivity, thus maximizing H c2 . We also observed that the magnetic T c onset was always significantly lower than the specific heat T c : although we partially ascribe the lower magnetization T c to the small grain size (< λ , the penetration depth) of the K-Ba122 phase, this behaviour also implies the presence of some grain-boundary barriers to current flow. Comparing the T c -distribution with J c , our systematic synthesis study reveals that increasing the first heat treatment above 750 °C or the second one above 600 °C significantly compromises the connectivity and suppresses the vortex pinning properties. We conclude that high-purity precursors and clean processing are not yet enough to overcome all J c limitations. However, our study suggests that a higher temperature T c -distribution, a larger H c2 and a better connectivity could be achieved by lowering the second heat treatment temperature below 600 °C thus enhancing, as a consequence, J c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Edge-Mediated Annihilation of Vacancy Clusters in Monolayer Molybdenum Diselenide (MoSe 2 ) under Electron Beam Irradiation

Here annihilation of vacancy clusters in monolayer molybdenum diselenide (MoSe2) under electron beam irradiation is reported. In situ high-resolution transmission electron microscopy observation reveals that the annihilation is achieved by diffusion of vacancies to the free edge near the vacancy clusters. Monte Carlo simulations confirm that it is energetically favorable for the vacancies to locate at the free edge. By computing the minimum energy path for the annihilation of one vacancy cluster as a case study, it is further shown that electron beam irradiation and pre-stress in the suspended MoSe2 monolayer are necessary for the vacancies to overcome the energy barriers for diffusion. The findings suggest a new mechanism of vacancy healing in 2D materials and broaden the capability of electron beam for defect engineering of 2D materials, a promising way of tuning their properties for engineering applications.

2D materials↗
DOE OSTI2025

Phase segregation dynamics in mixed-halide perovskites revealed by plunge-freeze cryo-electron microscopy

Mixed-halide lead perovskites, with photoexcited charge-carrier properties suitable for high-efficiency photovoltaics, hold significant promise for high-efficiency tandem solar cells. However, phase segregation under illumination, where an iodide-rich phase forms carrier trap states, remains a barrier to application. This study employs plunge-freeze cryoelectron microscopy to visualize nanoscale phase segregation dynamics in CsPb(Br x I 1–x ) 3 films. By rapidly freezing the illuminated samples, we preserve transient photoexcited ion distributions for high-resolution structural and compositional analysis at the nanoscale. Cryogenic scanning transmission electron microscopy (STEM) techniques (electron energy loss spectroscopy [EELS] and 4D-STEM) captured the dynamics of photo-induced iodine migration from grain boundaries to centers, identified the buildup of anisotropic strain, and captured the heterogeneous evolution of this process within a single grain. These findings provide insight into microscopic phase segregation mechanisms and their dynamics, enhancing our understanding of mixed-halide perovskite photostability.

42 ENGINEERING↗