Search NASA⌕ Search

SEARCH · Search NASA

Results for “CELLULASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Solid-State NMR Studies of Solvent-Mediated, Acid-Catalyzed Woody Biomass Pretreatment for Enzymatic Conversion of Residual Cellulose

Enzymes selectively hydrolyze the carbohydrate fractions of lignocellulosic biomass into corresponding sugars, but these processes are limited by low yields and slow catalytic turnovers. Under certain conditions, the rates and yields of enzymatic sugar production can be increased by pretreating biomass using solvents, heat, and dilute acid catalysts. However, the mechanistic details underlying this behavior are not fully elucidated, and designing effective pretreatment strategies remains an empirical challenge. Herein, using a combination of solid-state and high-resolution magic-angle-spinning NMR, infrared spectroscopy, and X-ray diffractometry, we show that the extent to which cellulase enzymes are able to hydrolyze solvent-pretreated biomass can be understood in terms of the ability of the solvent to break the chemical linkages between cellulose and noncellulosic materials in the cell wall. This finding is of general significance to enzymatic biomass conversion research, and implications for designing improved biomass conversion strategies are discussed. Furthermore, these findings demonstrate the utility of solid-state NMR as a tool to elucidate the key chemical and physical changes that occur during the liquid-phase conversion of real biomass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Insights into Low and High Recalcitrance Natural Poplar Variants Using Neutron and X-ray Scattering

Here, we used small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) to study two Populus trichocarpa variants, GW-11012 and BESC-316, with lignin contents of 17.8 and 23.2%, respectively, to understand why the low lignin variant has increased sugar release during liquid hot water (LHW) pretreatment. SANS showed differences in cell wall polymer arrangement in the variants. In GW-11012, the cellulose microfibrils were similar in size to BESC-316 but were not equally spaced and lignin was aggregated rather than homogenously interspersed with other matrix co-polymers. However, after LHW pretreatments, the SANS profiles of the pretreated variants were almost indistinguishable, indicating that the nanoscale structural features could not adequately explain the increased sugar release observed in GW-11012. WAXS analysis revealed higher cellulose crystallinity and larger crystallite size in native and pretreated GW-11012. However, the most significant difference was that the crystallite orientation was approximately 2-fold higher in GW-11012. This suggests that higher crystallite orientation may be favorable for the action of processive cellulases leading to increased sugar release from GW-11012. Our study shows that there is a complex interplay between cell wall polymers during their deposition resulting in changes in lignin distribution and cellulose structure, highlighting the importance of investigating plant cell wall architecture across multiple length scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Influence of Water-Soluble Compounds from Unpretreated Corn Stover Pellets on Enzymatic Hydrolysis of Cellulose

Aqueous extractives are minor and non-structural compounds in biomass that can be extracted using solvents, while contributing significantly to lignocellulose characteristics. Yet their roles in enzyme-mediated processing of lignocellulosic biomass remain elusive. Here, we examine the composition and features of extractives derived from untreated pelleted corn stover as well as their effects on enzymatic hydrolysis. Unlike the observations described in previous reports, we find that water extractable material improves the enzymatic hydrolysis of extractive-free stover by 67% with a glucose yield increase from 12% to 20% with 6 FPU cellulase per g glucan, whereas the enzyme activities are diminished when using microcrystalline cellulose as a substrate. The different behavior of corn stover and microcrystalline cellulose is likely attributed to the presence of lignin, which may interact with inhibitory compounds such as phenolics, mitigating the detrimental impacts of soluble inhibitors or insoluble lignin or both. These findings advance our fundamental understanding of the intrinsic behavior of extractives and help to optimize the schemes for efficient and cost-competitive enzymatic conversion of lignocellulose.

09 BIOMASS FUELS↗

Lignin Removal in Subcellular Location of Poplar Cell Wall During Pretreatment Significantly Impacts Cellulose Digestibility

The γ-valerolactone (GVL) pretreatment is one of the leading solvent-based methods for producing high-quality lignin under mild conditions. However, the glucan conversion yield from GVL pretreated biomass remains unsatisfactory. To explore the discrepancies between the relatively low glucan conversion and high lignin extraction, we conducted GVL−HCl and NaOH pretreatments on poplar and investigated their effects on lignin content and location, as well as on enzymatic hydrolysis of poplar cell walls at the subcellular level. Under designated pretreatment conditions of GVL−HCl (90% GVL, 0.1 M HCl, 100 °C, 1 h) and NaOH (1 M, 121 °C, 2 h), the glucan conversion yields were 69.4% and 95.8%, with lignin removal rates of 67.8% and 47.7%, respectively. Four types of GFP-labeled carbohydrate binding modules were used to identify different forms of cellulose in the pretreated cell walls. The overall binding intensities to pretreated poplar were stronger for NaOH compared to GVL−HCl pretreatment. Stimulated Raman scattering microscopy imaging revealed that GVL−HCl preferentially extracted lignin from the compound middle lamella and cell corner areas, while NaOH effectively dissolved lignin in the secondary cell walls. Real-time imaging of cellulase degradation of pretreated cell walls further indicated that digestion started from both the cell lumen and the compound middle lamella areas for GVL, whereas it occurred uniformly across the secondary cell walls for NaOH. Our findings suggest that the location of lignin removal during pretreatment is crucial for enzymatic cellulose degradation, in addition to the total amount of lignin extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physicochemical structural changes of poplar and switchgrass during biomass pretreatment and enzymatic hydrolysis

Converting lignocellulosics to simple sugars for second generation bioethanol is complicated due to biomass recalcitrance, and it requires a pretreatment stage prior to enzymatic hydrolysis. In this study, native, pretreated (acid and alkaline) and partially hydrolyzed poplar and switchgrass were characterized by using Simons’ staining for cellulose accessibility, GPC for degree of polymerization (DP), and FTIR for chemical structure of plant cell wall. The susceptibility of the pretreated biomass to enzymatic hydrolysis could not be easily predicted from differences in cellulose DP and accessibility. During hydrolysis, the most significant DP reduction occurred at the very beginning of hydrolysis, and the DP began to decrease at a significantly slower rate after this initial period, suggesting an existence of a synergistic action of endo- and exoglucanases that contribute to the occurrence of a “peeling off” mechanism. Cellulose accessibility was found to be increased at the beginning of hydrolysis, after reaching a maximum value then started to decrease. In conclusion, the fresh enzyme restart hydrolysis experiment along with the accessibility data indicated that the factors associated with the nature of enzyme such as irreversible nonspecific binding of cellulases by lignin and steric hindrance of enzymes should be responsible for the gradual slowing down of the reaction rate.

09 BIOMASS FUELS↗

Effects of Biomass Accessibility and Klason Lignin Contents during Consolidated Bioprocessing in Populus trichocarpa

The bacterium Clostridium thermocellum offers a distinct and integrated approach to ethanol production through consolidated bioprocessing (CBP). The Simons’ stain technique, which assays the accessibility of lignocellulosic biomass, has been traditionally applied to fungal cellulase systems; however, its application to CBP has not been fully explored. For this reason, the structural properties of eight Populus trichocarpa with either high or low biomass densities were compared in this paper to determine bioconversion differences during separate hydrolysis and fermentation (SHF) and CBP with C. thermocellum. Simons’ staining generally identifies low density poplar as more accessible than high density poplar. Additionally, low density P. trichocarpa generally contained less Klason lignin than high density poplar. SHF and CBP treatments consistently identified BESC-7 (high density, low accessibility, low surface roughness) as a low ethanol yielding biomass and GW-9914 (low density, high accessibility, high surface roughness) as a high ethanol yielding biomass. Upon further investigation, BESC-7 also contained a high Klason lignin content (~25%), while GW-9914 had a low lignin content (~20%). Cellulose degree of polymerization (DP) measurements exhibited a weak linear correlation with accessibility (r 2 = 0.17). Finally, therefore, the ethanol yields were correlated with accessibility and lignin content extremes but not cellulose DP.

09 BIOMASS FUELS↗

Understanding Lignin Fractionation and Characterization from Engineered Switchgrass Treated by an Aqueous Ionic Liquid

Aqueous ionic liquids (ILs) have received increasing interest because of their high efficacy in fractionating and pretreating lignocellulosic biomass while at the same time mitigating several challenges associated with IL pretreatment such as IL viscosity, gel formation during pretreatment, and the energy consumption and costs associated with IL recycling. This paper investigated the fate of lignin, its structural and compositional changes, and the impact of lignin modification on the deconstruction of cell wall compounds during aqueous IL (10% w/w cholinium lysinate) pretreatment of wild-type and engineered switchgrass. The 4CL genotype resulting from silencing of 4-coumarate:coenzyme A ligase gene (Pv4CL1) had a lower lignin content, relatively higher amount of hydroxycinnamates, and higher S/G ratio and appeared to be less recalcitrant to IL pretreatment likely due to the lower degree of lignin branching and more readily lignin solubilization. The results further demonstrated over 80% of lignin dissolution from switchgrass into the liquid fraction under mild conditions while the remaining solids were highly digestible by cellulases. The soluble lignin underwent partial depolymerization to a molecular weight around 500–1000 Da. 1 H– 13 C HSQC NMR results demonstrated that the variations in lignin compositions led to different modes of lignin dissolution and depolymerization during pretreatment of engineered switchgrass. Finally, these results provide insights into the impact of lignin manipulation on biomass fractionation and lignin depolymerization and lead to possible ways toward developing a more selective and efficient lignin valorization process based on aqueous IL pretreatment technology.

59 BASIC BIOLOGICAL SCIENCES↗

Assessing the Facile Pretreatments of Bagasse for Efficient Enzymatic Conversion and Their Impacts on Structural and Chemical Properties

Here, novel and sustainable pretreatment approaches are desired to improve the techno-commercial feasibility of biorefineries in the future. In this study, 10 renewable deep eutectic solvents (DESs) were evaluated for their pretreatment efficiency at facile conditions with sugar cane bagasse as substrate and compared with conventional pretreatment approaches (dilute alkali, dilute acid, and ionic liquid (IL)) for lignin removal, saccharification yield, cellulose accessibility, crystallinity, and physiochemical properties. Although, the highest delignification was obtained with dilute alkali (59.7%) and choline chloride:lactic acid or ChCl:LA (50.6%), the maximum enzymatic conversion of 98.0% and 90.4% was observed with IL (1-butyl-3-methylimidazolium acetate) and ChCl:LA, respectively. uclear magnetic resonance analysis of ChCl:LA-derived lignin showed selective removal of guaiacyl lignin without condensation structure formation observed. Interestingly, unlike IL, the lignin was substantially depolymerized after ChCl:LA pretreatment as determined by gel permeation chromatography. Further, high compatibility of ChCl:LA with cellulase in comparison of IL with easy recyclability and recycling showed that DESs synthesized from a renewable resource are promising “green” solvents for future biorefinery operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Quantitative Molecular Atlas for Interactions Between Lignin and Cellulose

Lignin and cellulose are two of the most abundant polymers on Earth, and are found in close proximity within plant cell walls. Despite their ubiquity, relatively little is known quantitatively about their interactions within plants, and by extension how their interaction may affect industrial biomass utilization. Given the inherent heterogeneity of the lignin polymer and the structural complexity of cellulose, quantitative relationships between given cellulose faces and specific lignin chemistries have been challenging to ascertain experimentally. In this study, we use molecular simulation to examine individual combinations of cellulose binding face and lignin chemistry to build a quantitative lignin-cellulose interaction atlas, including contributions from both specific hydrogen bonds observed in simulation and nonspecific interactions between lignin and cellulose driven by solvent considerations. Over all monomeric and dimeric lignin chemistries tested, the hydrophobic 100 face is the preferred cellulose interaction site. Among the hydrophilic crystalline faces, binding of these molecules is strongest to the 110 cellulose face. The chemical composition of lignin monomers and dimers is also found to modulate the binding affinity, with additional methoxy groups increasing the contact area to the cellulose surface, which we hypothesize may protect native cellulose from degradation. Additional methoxylation and monomer linkages that facilitate planar aromatic ring orientations increase the binding affinity between small lignin-related molecules and cellulose, with the planar linkages between guaiacyl-type monomers leading to higher binding affinities. These trends can be extended to larger lignin polymers, where we quantify the relationships between lignin polymer size and binding affinity through replica exchange umbrella sampling simulations. Rather than molecular weight, the binding surface area between the lignin polymer and the cellulose surface dictates the interaction strength. As a result, based on the findings here, we expect there to be abundant and durable interaction between cellulose and lignin, particularly on the hydrophobic face of cellulose where cellulase enzymes typically bind.

09 BIOMASS FUELS↗

Suite of Activity-Based Probes for Cellulose-Degrading Enzymes

Microbial glycoside hydrolases play a dominant role in the biochemical conversion of cellulosic biomass to high-value biofuels. Anaerobic cellulolytic bacteria are capable of producing multicomplex catalytic subunits containing cell-adherent cellulases, hemicellulases, xylanases, and other glycoside hydrolases to facilitate the degradation of highly recalcitrant cellulose and other related plant cell wall polysaccharides. Clostridium thermocellum is a cellulosome producing bacterium that couples rapid reproduction rates to highly efficient degradation of crystalline cellulose. Herein, we have developed and applied a suite of difluoromethylphenyl aglycone, N-halogenated glycosylamine, and 2-deoxy-2-fluoroglycoside activity-based protein profiling (ABPP) probes to the direct labeling of the C. thermocellum cellulosomal secretome. These activity-based probes (ABPs) were synthesized with alkynes to harness the utility and multimodal possibilities of click chemistry, and to increase enzyme active site inclusion for LC-MS analysis. We directly analyzed ABP-labeled and unlabeled global MS data, revealing ABP selectivity for glycoside hydrolase (GH) enzymes in addition to a large collection of integral cellulosome-containing proteins. By identifying reactivity and selectivity profiles for each ABP, we demonstrate our ability to widely profile the functional cellulose degrading machinery of the bacterium. Derivatization of the ABPs, including reactive groups, acetylation of the glycoside binding groups, and mono- and disaccharide binding groups, resulted in considerable variability in protein labeling. Our probe suite is applicable to aerobic and anaerobic cellulose degrading systems, and facilitates a greater understanding of the organismal role associated within biofuel development.

Chauvigne-Hines, Lacie M↗

Development of a Multi-Point Quantitation Method to Simultaneously Measure Enzymatic and Structural Components of the Clostridium thermocellum Cellulosome Protein Complex

Clostridium thermocellum has emerged as a leading bioenergy-relevant microbe due to its ability to solubilize cellulose into carbohydrates, mediated by multi-component membrane-attached complexes termed cellulosomes. To probe microbial cellulose utilization rates, it is desirable to be able to measure the concentrations of saccharolytic enzymes and estimate the total amount of cellulosome present on a mass basis. Current cellulase determination methodologies involve labor-intensive purification procedures and only allow for indirect determination of abundance. We have developed a method using multiple reaction monitoring (MRM-MS) to simultaneously quantitate both enzymatic and structural components of the cellulosome protein complex in samples ranging in complexity from purified cellulosomes to whole cell lysates, as an alternative to a previously-developed enzyme-linked immunosorbent assay (ELISA) method of cellulosome quantitation. The precision of the cellulosome mass concentration in technical replicates is better than 5% relative standard deviation for all samples, indicating high precision for determination of the mass concentration of cellulosome components.

absolute quantitation↗

Engineering enhanced cellobiohydrolase activity

Glycoside Hydrolase Family 7 cellobiohydrolases (GH7 CBHs) catalyze cellulose depolymerization in cellulolytic eukaryotes, making them key discovery and engineering targets. However, there remains a lack of robust structure–activity relationships for these industrially important cellulases. Here, we compare CBHs from Trichoderma reesei (TrCel7A) and Penicillium funiculosum (PfCel7A), which exhibit a multi-modular architecture consisting of catalytic domain (CD), carbohydrate-binding module, and linker. We show that PfCel7A exhibits 60% greater performance on biomass than TrCel7A. To understand the contribution of each domain to this improvement, we measure enzymatic activity for a library of CBH chimeras with swapped subdomains, demonstrating that the enhancement is mainly caused by PfCel7A CD. We solve the crystal structure of PfCel7A CD and use this information to create a second library of TrCel7A CD mutants, identifying a TrCel7A double mutant with near-equivalent activity to wild-type PfCel7A. Overall, these results reveal CBH regions that enable targeted activity improvements.

09 BIOMASS FUELS↗

Enhanced delignification of steam-pretreated poplar by a bacterial laccase

The recalcitrance of woody biomass, particularly its lignin component, hinders its sustainable transformation to fuels and biomaterials. Although the recent discovery of several bacterial ligninases promises the development of novel biocatalysts, these enzymes have largely been characterized using model substrates: direct evidence for their action on biomass is lacking. Herein, we report the delignification of woody biomass by a small laccase (sLac) from Amycolatopsis sp . 75iv3. Incubation of steam-pretreated poplar (SPP) with sLac enhanced the release of acid-precipitable polymeric lignin (APPL) by ~6-fold, and reduced the amount of acid-soluble lignin by ~15%. NMR spectrometry revealed that the APPL was significantly syringyl-enriched relative to the original material (~16:1 vs. ~3:1), and that sLac preferentially oxidized syringyl units and altered interunit linkage distributions. sLac’s substrate preference among monoaryls was also consistent with this observation. In addition, sLac treatment reduced the molar mass of the APPL by over 50%, as determined by gel-permeation chromatography coupled with multi-angle light scattering. Finally, sLac acted synergistically with a commercial cellulase cocktail to increase glucose production from SPP ~8%. Altogether, this study establishes the lignolytic activity of sLac on woody biomass and highlights the biocatalytic potential of bacterial enzymes.

59 BASIC BIOLOGICAL SCIENCES↗

Specialized activities and expression differences for Clostridium thermocellum biofilm and planktonic cells

Clostridium thermocellum forms biofilms adherent to lignocellulosic feedstock in a typical continuous cell-monolayer to efficiently break down and uptake cellulose hydrolysates. The sessile cells of biofilms may revert to non-adherent planktonic cells through generation of offspring cells or microenvironment constraints such as limited surface area. These interdependent cell populations co-exist and have different contributions to culture activity and growth. Here, we developed a novel bioreactor design to rapidly harvest sessile and planktonic cell populations for omics studies. In RNA-seq analyses, within 3299 protein coding genes, 59% (or 1958 genes) were differentially expressed with a minimum two-fold change between the two cell populations isolated simultaneously at high culture activity. Furthermore, sessile cells had definitive greater expression of genes involved in catabolism of carbohydrates by glycolysis and pyruvate fermentation, ATP generation by proton gradient, the anabolism of proteins and lipids and cellular functions critical for cell division; planktonic cells had notably higher gene expression for flagellar motility and chemotaxis, cellulosomal cellulases and anchoring scaffoldins, and a range of stress induced homeostasis mechanisms such as oxidative stress protection by antioxidants and flavoprotein co-factors, methionine repair, Fe-S cluster assembly and repair in redox proteins, cell growth control through tRNA thiolation, recovery of damaged DNA by nucleotide excision repair and removal of terminal proteins by proteases. Our knowledge of these cellular adaptations will aid the engineering of industrially relevant strains for consolidated bioprocessing of solid lignocellulosic biomass

59 BASIC BIOLOGICAL SCIENCES↗

A synergistic biorefinery based on catalytic conversion of lignin prior to cellulose starting from lignocellulosic biomass

Current biomass utilization processes do not make use of lignin beyond its heat value. Here we report on a bimetallic Zn/Pd/C catalyst that converts lignin in intact lignocellulosic biomass directly into two methoxyphenol products, leaving behind the carbohydrates as a solid residue. Genetically modified poplar enhanced in syringyl (S) monomer content yields only a single product, dihydroeugenol. Lignin-derived methoxyphenols can be deoxygenated further to propylcyclohexane. In this work the leftover carbohydrate residue is hydrolyzed by cellulases to give glucose in 95% yield, which is comparable to lignin-free cellulose (solka floc). New conversion pathways to useful fuels and chemicals are proposed based on the efficient conversion of lignin into intact hydrocarbons.

09 BIOMASS FUELS↗

Diol pretreatment to fractionate a reactive lignin in lignocellulosic biomass biorefineries

Lignin-first fractionation has become a new biorefinery target to obtain valuable lignin monomers toward the complete utilization of lignocellulosic biomass, but increasing delignification through conventional pretreatment approaches often affects the structural integrity of the dissociated lignin. We discovered a new reactive lignin with a great solvent solubility and preserved β-O-4 linkages from eucalyptus after a modified organosolv pretreatment using 1,4-butanediol (1,4-BDO). Unlike conventional organosolv pretreatment using ethanol, lignin deposition was not observed in 1,4-BDO pretreatment. Similarly, 2D HSQC NMR analysis revealed that the residual lignin obtained from 1,4-BDO pretreated eucalypts contained a relatively higher amount of β-O-4 interunit linkages, indicating its higher integrity than ethanol pretreated lignin. This result agreed with the lower content of phenolic hydroxyl groups in dissolved lignin via 31 P NMR analysis. With increasing pretreatment severity, the amount of aliphatic hydroxyl groups decreased in ethanol pretreated lignin while it remained at a higher level in 1,4-BDO pretreated lignin. These results suggested that 1,4-BDO quenched the benzyl carbocation intermediate and formed ether linkages with a hydroxyl tail at the α position of the lignin. Solubility tests revealed that grafting aliphatic hydroxyl groups on 1,4-BDO lignin increased its dissolution. This phenomenon was further demonstrated for four different diols with similar structures. Likewise, more than 90% cellulose conversion was obtained for all the diol pretreated eucalyptus after 48 h of enzymatic hydrolysis with cellulase at a loading of 7.5 FPU per gram of glucan. Diol pretreatment thus offers a promising reaction pathway to coincide with three pillars of biorefinery for lignin fractionation, lignin structural integrity, and cellulose hydrolysis.

09 BIOMASS FUELS↗

Acoustic force spectroscopy reveals subtle differences in cellulose unbinding behavior of carbohydrate-binding modules

Protein adsorption to solid carbohydrate interfaces is critical to many biological processes, particularly in biomass deconstruction. To engineer more-efficient enzymes for biomass deconstruction into sugars, it is necessary to characterize the complex protein–carbohydrate interfacial interactions. A carbohydrate-binding module (CBM) is often associated with microbial surface-tethered cellulosomes or secreted cellulase enzymes to enhance substrate accessibility. However, it is not well known how CBMs recognize, bind, and dissociate from polysaccharides to facilitate efficient cellulolytic activity, due to the lack of mechanistic understanding and a suitable toolkit to study CBM–substrate interactions. Our work outlines a general approach to study the unbinding behavior of CBMs from polysaccharide surfaces using a highly multiplexed single-molecule force spectroscopy assay. Here, we apply acoustic force spectroscopy (AFS) to probe a Clostridium thermocellum cellulosomal scaffoldin protein (CBM3a) and measure its dissociation from nanocellulose surfaces at physiologically relevant, low force loading rates. An automated microfluidic setup and method for uniform deposition of insoluble polysaccharides on the AFS chip surfaces are demonstrated. The rupture forces of wild-type CBM3a, and its Y67A mutant, unbinding from nanocellulose surfaces suggests distinct multimodal CBM binding conformations, with structural mechanisms further explored using molecular dynamics simulations. Applying classical dynamic force spectroscopy theory, the single-molecule unbinding rate at zero force is extrapolated and found to agree with bulk equilibrium unbinding rates estimated independently using quartz crystal microbalance with dissipation monitoring. However, our results also highlight critical limitations of applying classical theory to explain the highly multivalent binding interactions for cellulose–CBM bond rupture forces exceeding 15 pN.

09 BIOMASS FUELS↗

Discrete and Structurally Unique Proteins (T$\bar{a}$pirins) Mediate Attachment of Extremely Thermophilic Caldicellulosiruptor Species to Cellulose

A variety of catalytic and noncatalytic protein domains are deployed by select microorganisms to deconstruct lignocellulose. These extracellular proteins are used to attach to, modify, and hydrolyze the complex polysaccharides present in plant cell walls. Cellulolytic enzymes, often containing carbohydrate-binding modules, are key to this process; however, these enzymes are not solely responsible for attachment. Few mechanisms of attachment have been discovered among bacteria that do not form large polypeptide structures, called cellulosomes, to deconstruct biomass. In this study, bioinformatics and proteomics analyses identified unique, discrete, hypothetical proteins (“t$\bar{a}$pirins,” origin from M$\bar{a}$ori: to join), not directly associated with cellulases, that mediate attachment to cellulose by species in the noncellulosomal, extremely thermophilic bacterial genus Caldicellulosiruptor. Two t$\bar{a}$pirin genes are located directly downstream of a type IV pilus operon in strongly cellulolytic members of the genus, whereas homologs are absent from the weakly cellulolytic Caldicellulosiruptor species. Based on their amino acid sequence, t$\bar{a}$pirins are specific to these extreme thermophiles. T$\bar{a}$pirins are also unusual in that they share no detectable protein domain signatures with known polysaccharide-binding proteins. Adsorption isotherm and trans vivo analyses demonstrated the carbohydrate-binding module-like affinity of the t$\bar{a}$pirins for cellulose. Crystallization of a cellulose-binding truncation from one t$\bar{a}$pirin indicated that these proteins form a long β-helix core with a shielded hydrophobic face. In addition, they are structurally unique and define a new class of polysaccharide adhesins. Strongly cellulolytic Caldicellulosiruptor species employ t$\bar{a}$pirins to complement substrate-binding proteins from the ATP-binding cassette transporters and multidomain extracellular and S-layer-associated glycoside hydrolases to process the carbohydrate content of lignocellulose.

59 BASIC BIOLOGICAL SCIENCES↗