Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTROL, AUTOMATIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Theoretical study of the effect of wind velocity gradients on longitudinal stability and control in climbing and level flight

A change in the wind vector over a short distance along the flight path (wind gradient) has caused several severe airplane accidents during take-off and landing. Results of a previous study showed that, in descending flight, a positive wind gradient (decreasing head wind) caused severe divergent motion and a negative wind gradient (decreasing tail wind) caused oscillatory motion which should not create a control problem. The results obtained when the same method of analysis was applied to climbing and to straight and level flight are reported. In straight and level flight, a wind gradient was found to cause effects similar to those found in descending flight. In climbing flight, it was found that a negative wind gradient caused a slightly divergent oscillation that presented no control problems and a positive wind gradient caused oscillatory divergence. Results of motion studies indicated that adequate control of the airplane motions can be provided by automatic control systems.

Sherman, W. L.↗
NASA NTRS1993

Dynamic response and control of a jet-transport aircraft encountering a single-axis vortex

The dynamic responses of a jet-transport aircraft to two types of single-axis wind vortex encounters are studied. Aircraft attitude, flight path angle, and aerodynamic angle excursions are analyzed and dominating dynamic forcing effects are identified for each encounter. A simple departure-preventing LQR controller is designed to demonstrate the benefits of using automatic control to reduce the wind vortex hazard. A Proportional-Integral-Filter controller structure successfully regulates the critical parameters, roll angle, phi, and sideslip angle, beta, for the two different vortex encounters considered in this study.

Spilman, Darin R.↗
NASA NTRS1994

Life Sciences and Space Research 25 (3): Natural and Artifical Ecosystems; Meeting F4 of the COSPAR Plenary Meeting, 29th, Washington, DC, Aug. 28-Sep. 5, 1992

Bioregenerative life support systems will be an essential part of long duration manned space flight. Studies have been made of various components of these closed ecological systems. these studies have included those spaceborne experiments on Spacelab and Mir, as well as ground-based simulations. The effects of reduced gravity include alterations in food crop and other plant growth and vigor. Systems have also been designed and tested to provide a balanced regenerative system that recycles airborne and other wastes while providing nutrients and other input for future cycles. Hydroponic cultivation must include control of pathogens. All closed systems require sensing and automatic control.

Macelroy, R. D.↗
NASA NTRS1961

Analysis of a Linear System for Variable-Thrust Control in the Terminal Phase of Rendezvous

A linear system for applying thrust to a ferry vehicle in the 3 terminal phase of rendezvous with a satellite is analyzed. This system requires that the ferry thrust vector per unit mass be variable and equal to a suitable linear combination of the measured position and velocity vectors of the ferry relative to the satellite. The variations of the ferry position, speed, acceleration, and mass ratio are examined for several combinations of the initial conditions and two basic control parameters analogous to the undamped natural frequency and the fraction of critical damping. Upon making a desirable selection of one control parameter and requiring minimum fuel expenditure for given terminal-phase initial conditions, a simplified analysis in one dimension practically fixes the choice of the remaining control parameter. The system can be implemented by an automatic controller or by a pilot.

Hord, Richard A.↗
NASA NTRS1972

A valve concept for remote fluid flow control

Valve concept has been devised which offers lightweight, simplified mechanism capable of automatic control of large number of fluid flow ports. Valve control is achieved with valve stem which is bimetallic device activated by heating coil to open or close selected supply port. Number of controlled ports is limited only by desired physical size of system.

Flynn, W. J.↗
NASA NTRS1987

Variable structure controller design for spacecraft nutation damping

Variable structure systems theory is used to design an automatic controller for active nutation damping in momentum biased stabilized spacecraft. Robust feedback stabilization of roll and yaw angular dynamics is achieved with prescribed qualitative characteristics which are totally independent of the spacecraft defining parameters.

Sira-Ramirez, Hebertt↗
NASA NTRS1967

Rigid-body motion extracted from total motion of a flexible body

Control system eliminates or reduces flexibility effects on the manual and automatic control of large flexible vehicles. It extracts rigid-body and flexible-body motion and adapts well when a flexible-body frequency coincides or nearly coincides with the control mode frequency.

Howard, J. C.↗
NASA NTRS1975

Status and trends in active control technology

The emergence of highly reliable fly-by-wire flight control systems makes it possible to consider a strong reliance on automatic control systems in the design optimization of future aircraft. This design philosophy has been referred to as the control configured vehicle approach or the application of active control technology. Several studies and flight tests sponsored by the Air Force and NASA have demonstrated the potential benefits of control configured vehicles and active control technology. The present status and trends of active control technology are reviewed and the impact it will have on aircraft designs, design techniques, and the designer is predicted.

Rediess, H. A.↗
NASA NTRS1982

Flight experience with a backup flight-control system for the HiMAT research vehicle

The NASA Dryden Flight Research Facility is conducting flight tests of two remotely piloted, subscale, advanced fighter configurations; the tests are part of the Highly Maneuverable Aircraft Technology (HiMAT) project. Closed-loop primary flight control is performed from a ground-based cockpit and digital computer in conjunction with an up/down telemetry link. A significant feature of these vehicles is an on-board, digitally active, backup control system designed to recover the vehicle in the event of a transfer from primary control. Automatic transfers occur upon certain critical ground or airborne system malfunctions. Control modes are provided that enable a ground or airborne controller to guide the vehicle to a safe landing. This paper describes the features, operational development, and flight evaluation of the HiMAT backup flight control system.

Kempel, R. W.↗
NASA NTRS1986

Mission Adaptive Wing test program

With the completion of the F-111 test-bed Mission Adaptive Wing (MAW) test program's manual flight control system, emphasis has been shifted to flight testing of MAW automatic control modes. These encompass (1) cruise camber control, (2) maneuver camber control, (3) maneuver load control, and (4) maneuver enhancement and load alleviation control. The aircraft is currently cleared to a 2.5-g maneuvering limit due to generally higher variable-incidence wing pivot loads than had been anticipated, especially at the higher wing-camber settings. Buffet is noted to be somewhat higher than expected at the higher camber settings.

Birk, Frank T.↗
NASA NTRS1989

Making and Inspecting Large Wire Grids

Old techniques refined and combined to make new polarizers. Equipment and procedures developed for fabrication and inspection of large, precisely-spaced, flat grids of wire. Technology includes refinements and combinations of established techniques for winding grids of electron tubes and ruling optical gratings and incorporates recent developments in electronic control and laser/electronic-based metrology. Wire wrapped on frame half translated under automatic control to achieve desired space between turns. Frame halves put together, and excess wire cut away, leaving finished grid mounted in frame. Useful as polarizers and beam splitters for electromagnetic radiation in overlapping ranges of long infrared and microwaves.

Magner, Thomas J.↗
NASA NTRS1986

Integrating Computer Architectures into the Design of High-Performance Controllers

Modern control systems must typically perform real-time identification and control, as well as coordinate a host of other activities related to user interaction, on-line graphics, and file management. This paper discusses five global design considerations that are useful to integrate array processor, multimicroprocessor, and host computer system architecture into versatile, high-speed controllers. Such controllers are capable of very high control throughput, and can maintain constant interaction with the non-real-time or user environment. As an application example, the architecture of a high-speed, closed-loop controller used to actively control helicopter vibration will be briefly discussed. Although this system has been designed for use as the controller for real-time rotorcraft dynamics and control studies in a wind-tunnel environment, the control architecture can generally be applied to a wide range of automatic control applications.

Jacklin, Stephen A.↗
NASA NTRS1962

THE MERCURY CAPSULE ATTITUDE CONTROL SYSTEM

In accordance with the basic design concepts of the Mercury Capsule, the manual and automatic control systems were developed to provide a redundant and integrated method of controlling the capsule attitude. The systems were designed to meet the requirements of ballistic and orbital flight, for normal and abort missions. Since the orbital mission includes all modes of control, it will serve as a basis for the system description.

Mercury capsule↗
NASA NTRS1980

Remotely piloted vehicles. Citations from the International Aerospace abstracts data base

These citations from the international literature cover various aspects of remotely piloted vehicles. Included are articles concerning aircraft design, flight tests, aircraft control, cost effectiveness, automatic flight control, automatic pilots, and data links. Civil aviation applications are included, although military uses of remotely piloted vehicles are stressed. This updated bibliography contains 224 citations, 43 of which are new additions to the previous edition.

Mauk, S. C.↗
NASA NTRS1981

Development of advanced Czochralski Growth Process to produce low cost 150 KG silicon ingots from a single crucible for technology readiness

The goals in this program for advanced czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness are outlined. To provide a modified CG2000 crystal power capable of pulling a minimum of five crystals, each of approximately 30 kg in weight, 150 mm diameter from a single crucible with periodic melt replenishment. Crystals to have: resistivity of 1 to 3 ohm cm, p-type; dislocation density below 1- to the 6th power per cm; orientation (100); after growth yield of greater than 90%. Growth throughput of greater than 2.5 kg per hour of machine operation using a radiation shield. Prototype equipment suitable for use as a production facility. The overall cost goal is $.70 per peak watt by 1986. To accomplish these goals, the modified CG2000 grower and development program includes: (1) increased automation with a microprocessor based control system; (2) sensors development which will increase the capability of the automatic controls system, and provide technology transfer of the developed systems.

Source record↗
NASA NTRS1999

Non-Intrusive Impedance-Based Cable Tester

A non-intrusive electrical cable tester determines the nature and location of a discontinuity in a cable through application of an oscillating signal to one end of the cable. The frequency of the oscillating signal is varied in increments until a minimum, close to zero voltage is measured at a signal injection point which is indicative of a minimum impedance at that point. The frequency of the test signal at which the minimum impedance occurs is then employed to determine the distance to the discontinuity by employing a formula which relates this distance to the signal frequency and the velocity factor of the cable. A numerically controlled oscillator is provided to generate the oscillating signal, and a microcontroller automatically controls operation of the cable tester to make the desired measurements and display the results. The device is contained in a portable housing which may be hand held to facilitate convenient use of the device in difficult to access locations.

Medelius, Pedro J.↗
NASA NTRS2004

Setup for Visual Observation of Carbon-Nanotube Arc Process

A simple optical setup has been devised to enable safe viewing of the arc and measurement of the interelectrode gap in a process in which carbon nanotubes are produced in an arc between a catalyst-filled carbon anode and a graphite cathode. This setup can be used for visually guided manual positioning of the anode to maintain the interelectrode gap at a desired constant value, possibly as a low-technology alternative to the automatic position/voltage control described in Automatic Control of Arc Process for Making Carbon Nanotubes (MSC-23134), NASA Tech Briefs, Vol. 28, No. 3 (March 2004), page 51. The optical setup consists mainly of lenses for projecting an image of the arc onto a wall, plus a calibrated grid that is mounted on the wall so that one can measure the superimposed image of the arc. To facilitate determination of the end point of the process, the anode is notched, by use of a file, at the end of the filled portion that is meant to be consumed in the process. As the anode is consumed and the notch comes into view in the scene projected onto the wall, the process operator switches off the arc current.

Scott, Carl D.↗
NASA NTRS1957

Flight Investigation of the Effectiveness of an Automatic Aileron Trim Control Device for Personal Airplanes

A flight investigation to determine the effectiveness of an automatic aileron trim control device installed in a personal airplane to augment the apparent spiral stability has been conducted. The device utilizes a rate-gyro sensing element in order to switch an on-off type of control that operates the ailerons at a fixed rate through control centering springs. An analytical study using phase-plane and analog-computer methods has been carried out to determine a desirable method of operation for the automatic trim control.

Phillips, William H↗