Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical explosives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Direct Alpha Spectrometry of Nuclear Fallout

Advanced instruments and methods are under development to allow direct alpha spectrometry of nuclear fallout debris near the point of collection, to support nuclear forensics (NF). New approaches are needed to support NF in order to accelerate the process for data generation and reduce the overall timeline for decision making. Fallout debris at short time periods following detonation can be difficult to work with for alpha spectrometry, due to the presence of intense beta radiation originating from significant quantities of high-activity fission products. Intense beta radiation can challenge traditional silicon-based high-resolution alpha spectrometers. Addressing this, single-crystal (sc) chemical vapor deposition (CVD) produced diamond semiconductors have been studied for use for alpha spectrometry for assaying nuclear fallout debris. Tests have been performed using scCVD sensors to assay a variety of actinide-bearing samples. Sample preparation, when done, has been limited to pulverization using a mechanical ball mill. To reduce measurement times, multi-chip arrays of scCVD diamond semiconductor have been developed in form factors suitable for field deployment in support of NF objectives. These arrays have been tested using high-beta-activity sol gel surrogate nuclear explosive debris (SNED) containing varying concentrations of uranium and plutonium. Results from the use of scCVD detectors with sol gel SNED will be presented.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2023

Reducing ion diffusion at atmospheric pressure through intermingled positive and negative ions

Increasing ion molecule reaction times for ambient ionization techniques can increase sensitivity of detection. Longer reaction times result in an increase in analyte signal relative to the reactant ion signal, however with a subsequent decrease in the total ion intensity. This loss in the total number of ions reaching the detector limits the extent to which increased reaction time can improve detection in practical applications. In this study ion loss was measured using either electric fields or gas flow to control ion transit time. Ion transit times ranged from 40 ms to 8s, which resulted in ion densities ranging from 5 x 10 6 to 2 x 10 4 ions/cm 3 , respectively. These results provide insights into practical reaction time limitations or experimental boundaries when exploring sensitivity enhancements in ambient ionization. When exploring longer reaction times with an atmospheric flow tube coupled to a mass spectrometer (AFT-MS), an additional corona discharge ionization source of the same polarity was added in an attempt to increase total ion signal, but no improvement in signal was observed. This observation suggested that there was a maximum ion density being reached by the corona discharge that could not be increased by adding more of the same polarity ions. A hypothesis was that intermingling both polarities of ions would reduce ion loss and increase the measured ion signal. When two corona discharge sources—one each of positive and negative polarity—were used simultaneously in an AFT-MS, the total ion signal of either polarity measured by the MS was approximately double the current from a single corona discharge source. An increase in the negative ion signal was also observed when ~10 parts-per-trillion vapor levels of an explosive (RDX) were introduced. In this case both the nitrate reactant ions and the RDX signal more than doubled with the addition of a corona discharge source producing positive ions. When intermingling positive and negative ions, an increase in ion current was also observed when the AFT was coupled directly to a Faraday detector or to an ion mobility spectrometer. This was the first demonstration of interfacing the AFT to an IMS. The observations and developments from this work will help in creating more portable instruments with improved sensitivity for detection of chemicals.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Parallel Implicit Hydrodynamics with Material Strength for High Explosive Burn Calculations

High explosives are almost always evolving in some form of metal containment vessel. This fact requires that a materials model for the evolution of the metal containment vessel be part of any simulation of the HE. Since the actual form of the strength model to be used is an open question, we incorporate the material strength properties in a relatively agnostic fashion, which will accommodate many strength models. The only restriction is that the stress components be a function of density, specific internal energy and velocities. In addition, the timescales and rates of the chemical reactions in the HE vary between thousands of seconds and nanoseconds. A hydrodynamics capable of operating in anticipation of the eventual violent release of energy via these chemical reactions is a necessity. The central issue in creating a hydrodynamics capable of spanning these timescales is to forgo the use of a Courant time step control necessary in an explicit hydrodynamics. The Courant time-step arises because of characteristic velocities associated with the material, such as the sound speed or, in materials with strength, characteristic longitudinal and transverse speeds associated with compression and shear. The method used to circumvent the need for a Courant time-step limit is to develop an implicit calculation of the advanced particle pressure and shear modulus derived from the conservation laws of mass, momentum and specific internal energy. This process creates the implicit hydrodynamics needed for the HE calculations of interest to this study.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of a collapsing gas bubble on the shock-to-detonation transition in liquid nitromethane

We studied the shock-induced collapse of butane gas bubbles in the homogeneous explosive nitromethane (NM) to investigate the effects of hot spot formation on the detonation process. A butane bubble was injected into a sample of NM, and a shock wave from a flat plate impactor compressed the bubble, creating a localized hot spot. We measured shock and detonation wave speeds with optical velocimetry, and we used a high-speed camera to image the shock propagation and bubble collapse processes. A multiband optical fiber pyrometer measured the time-resolved thermal radiance, and we used the results and emissivity values extracted from spectral fits to estimate temperatures. We measured the characteristics of the shock-to-detonation transition in NM with and without a bubble. All experiments were performed at shock pressures near 8 GPa, where neat NM can detonate. A single bubble in this system was shown to sensitize NM, leading to a reduced run-to-detonation time. We used hydrodynamic modeling to predict shock wave propagation, the extent of chemical reaction, and subsequent temperature rise from the collapsing bubble. We used a temperature-dependent Arrhenius burn model for simulations, and it yielded much better results than reactive burn models that depend only on pressure and density.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

3D-printed sheet jet for stable megahertz liquid sample delivery at X-ray free-electron lasers

X-ray free-electron lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit involves the delivery of samples to the X-ray interaction point in such a way that produces data of the highest possible quality and with maximal efficiency. This is hampered by intrinsic constraints posed by the light source and operation within a beamline environment. For liquid samples, the solution typically involves some form of high-speed liquid jet, capable of keeping up with the rate of X-ray pulses. However, conventional jets are not ideal because of radiation-induced explosions of the jet, as well as their cylindrical geometry combined with the X-ray pointing instability of many beamlines which causes the interaction volume to differ for every pulse. This complicates data analysis and contributes to measurement errors. An alternative geometry is a liquid sheet jet which, with its constant thickness over large areas, eliminates the problems related to X-ray pointing. Since liquid sheets can be made very thin, the radiation-induced explosion is reduced, boosting their stability. These are especially attractive for experiments which benefit from small interaction volumes such as fluctuation X-ray scattering and several types of spectroscopy. Although their use has increased for soft X-ray applications in recent years, there has not yet been wide-scale adoption at XFELs. Here, gas-accelerated liquid sheet jet sample injection is demonstrated at the European XFEL SPB/SFX nano focus beamline. Its performance relative to a conventional liquid jet is evaluated and superior performance across several key factors has been found. This includes a thickness profile ranging from hundreds of nanometres to 60 nm, a fourfold increase in background stability and favorable radiation-induced explosion dynamics at high repetition rates up to 1.13 MHz. Its minute thickness also suggests that ultrafast single-particle solution scattering is a possibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Role of Pentaerythritol Tetranitrate (PETN) Aging in Determining Detonator Firing Characteristics

Pentaerythritol tetranitrate (PETN) is one of the most commonly used explosives for both military and mining applications. PETN is used in EBW (exploding bridge wire) and EFI (exploding foil initiator) detonator devices. Due the widespread usage of PETN, studies focusing on how the explosive changes with age, primarily its function in detonators has received particular interest. Aging studies have identified several factors that affect PETN detonator function over time, most notably the specific surface area of the explosive powder. Though small-scale studies have been performed on specific detonator systems with isolated batches of material, what is missing is a large statistically-significant study focusing on PETN aging characteristics - such as powder coarsening - and their influence on detonator performance. Herein we report the first large statistically viable PETN aging study focusing on four batches of PETN powder from the same stock of PETN using two stabilizers, polysaccharide and TriPEON. PETN was aged both as a free-flowing powder as well as in modified EBW RP-2 detonators, for one month at 75 °C. The PETN powder has been analyzed chemically using Fisher specific surface area analysis, SEM imaging and light scattering particle size analysis. Additionally the detonators were tested for performance through voltage-sweep threshold testing and function time measurements. Findings from the study indicate that aging at 75 °C for one month significantly changes the specific surface area and particle size of unstabilized PETN, leading to increases in detonator function time, but not detonator threshold values. Powders stabilized with TriPEON displayed less significant increases in function time, while powder stabilized with polysaccharide exhibited no aging effects, despite the high temperature aging.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Spherically expanding flame in silane–hydrogen–nitrous oxide–argon mixtures

The effect of silane addition on the laminar flame speed ($S^0_u$) of flames propagating in hydrogen–nitrous oxide–argon mixtures has been investigated experimentally for the first time using the spherically expanding flame technique in a constant volume combustion chamber. Replacing hydrogen by silane and maintaining the equivalence ratio constant, much higher flame speeds, explosion peak pressures, and pressure rise coefficients were measured. A previously developed detailed reaction model has been updated based on ab initio thermodynamic properties calculations and collision limit violation analysis. The improved reaction model demonstrates encouraging performance in predicting the flame speed, with a mean absolute error below 11%. To explain the effect of silane addition on the flame dynamics, a number of parameters have been calculated including OH and H rate of production, heat release rate per reaction, and sensitivity coefficient on . The dynamics of freely propagating flames in SiH 4 –H 2 –N 2 O–Ar mixtures is essentially controlled by reactions of the H–O–N chemical system: N 2 O+H=N 2 +OH, OH+H 2 =H 2 O+H, and N 2 O(+M)=N 2 +O(+M). Whereas silane addition does not influence much the rate of production of OH, it significantly modifies that of H with a number of pyrolytic chemical pathways of silicon hydrides, such as SiH+H 2 =SiH 2 +H and Si+H 2 =SiH+H, which act as sink of H atom as they proceed in the backward direction. The reactions forming SiO(s) and SiO 2 (s), such as SiO+OH=SiO 2 (s)+H and 2SiO=2SiO(s), are exothermic and significantly contribute to the temperature increase. The adiabatic, constant pressure flame temperature for mixture containing silane is significantly higher, up to several 100’s K. The increase of induced by silane addition seems to be mostly related to the large increase of the flame temperature which leads to higher energy release rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

1,3,5-Trichloro-2,4,6-Trinitrobenzene: The Elusive Impurity Standard

1,3,5-triamino-2,4,6-trinitrobenzene (TATB) is an insensitive high explosive synthesized in two steps; 1,3,5-trichloro-2,4,6-trinitrobenzene (TCTNB) is the only intermediate. Due to solubility limitations, TATB is often dissolved in dimethylsulfoxide (DMSO) for liquid chromatography-mass spectrometry (LC–MS) analyses; however, DMSO is capable of participating in a wide variety of reactions. Intending to use it as an impurity standard, TCTNB was dissolved in DMSO. A stark color change from colorless to yellow accompanied by wavelength and ion chromatogram changes occurred over 24 hours. Three compounds were identified as causing the color change. All three were present in both acetone and DMSO solutions, but, overtime the absorbance spectra of the DMSO solution changed indicating an underlying reaction occurs between these compounds and DMSO. The chemical formulas of impurities present in the TCTNB sample as well as reaction products are identified via quadrupole time of flight mass spectrometry. The chemical structures are also proposed. The combination of the solvent system, ionization technique, and halogenated/nitrated aromatic ring structures resulted in substitutions of both the chlorine and nitro groups to hydroxyl groups. Furthermore, three proposed structures were closely related to TCTNB, but only one was detected at a consistent mass and absorbance wavelength in both acetone and DMSO. This compound had undergone a chlorine to hydroxyl substitution and should be utilized for TCTNB detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Shock compression response of an insensitive high explosive single crystal: 1,1-diamino-2,2-dinitroethene (FOX-7)

Insensitive high explosives (IHEs) – that do not compromise performance – are of immense interest as a safer alternative to conventional high explosives, such as pentaerythritol tetranitrate (PETN) and cyclotrimethylenetrinitramine (RDX). Despite the strong interest in using IHEs, shock compression experiments on IHE single crystals have not been reported. To address this need, plate impact experiments were conducted to measure wave profiles in 1,1-diamino-2,2-dinitroethene (FOX-7) single crystals – a representative IHE crystal – shocked to 21 GPa longitudinal stress. Particle velocity histories, measured using laser interferometry, show a clear two-wave structure (elastic-inelastic response) at modest stresses (<3.8 GPa). Wave profiles at higher stresses show a single (overdriven) wave. Measured shock velocities and wave profiles provide accurate Hugoniot data to 21 GPa. The measured wave profiles to 21 GPa show no sign of energy release due to chemical decomposition and constitute the first demonstration of an IHE single crystal insensitivity under plane shock compression. Numerical simulations using a phenomenological material model developed for FOX-7 showed good agreement with the measured wave profiles. The experimental results and continuum simulations presented here constitute a significant first step in gaining insight into the shock compression response of IHE single crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Decomposition of Irganox 1010 in plastic bonded explosives

Abstract Degradation pathways of Irganox 1010 in aged plastic bonded explosive (PBX) 9501 were investigated using ultrahigh performance liquid chromatography coupled to quadrupole time of flight mass spectrometry (UHPLC‐QTOF). Using a targeted approach, a total of 44 Irganox 1010 decomposition products were discovered. These decomposition products were formed through hydrolysis, scission, and/or oxidation of Irganox 1010. The hydrolytic decomposition of Irganox is a straightforward process resulting in the cleavage of the ester group(s) while oxidation and scission are more complicated and can happen at multiple locations on the Irganox 1010 molecule. Moreover, due to the symmetric nature of Irganox 1010, multiple decomposition reactions can occur. Indeed some decomposition products exhibited hydrolysis, oxidation, and scission. In order to probe any trends in the aged PBX 9501 samples, principal component analysis (PCA) was implemented. The greatest chemical differences between the aged PBX samples was hydrolysis of the ester functional groups on Irganox 1010. Despite the negative connotations of hydrolysis, the Irganox 1010 decomposition products are still able to function as a radical scavenger in PBX 9501 as intended.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Amorphization and Crystallization of Hexanitroazobenzene (HNAB) Using Conventional DSC and Flash DSC

Abstract The present work presents results from an investigation of the glass transition and crystallization behaviors of HNAB tested over more than five orders of magnitude of cooling rate from 0.005 °C/s to 600 °C/s (0.3 to 36000 °C/min) by a combination of conventional and Flash differential scanning calorimetry (DSC). The work quantifies the influence of the thermal amorphization route on the properties of this high explosive. Cooling rates faster than 100 °C/s (6000 °C/min) result in amorphous HNAB as expected from prior work, but we also find that amorphization of the HNAB occurs at cooling rates slower than 0.008 °C/s (0.5 °C/min). The behavior of the amorphous HNAB made by slow cooling is compared with that of amorphous HNAB made by fast cooling, as well as with that made by solvent casting in terms of glass transition temperature, apparent activation energy of glass transition, and dynamic fragility parameter m . Besides, the non‐isothermal crystallization response as a function of cooling rate is also reported. The thermal stability and decomposition energy of amorphous HNAB are compared with those of the crystalline counterpart, being similar heats of decomposition of 3295 and 3392 J/g, respectively; suggesting that the amorphous HNAB will have similar thermal stability and chemical energy to the crystalline form.

Koh, Yung P.↗
DOE OSTI2022

Supernova-driven Turbulent Metal Mixing in High-redshift Galactic Disks: Metallicity Fluctuations in the Interstellar Medium and its Imprints on Metal-poor Stars in the Milky Way

The extent to which turbulence mixes gas in the face of recurrent infusions of fresh metals by supernovae (SN) could help provide important constraints on the local star formation conditions. This includes predictions of the metallicity dispersion among metal-poor stars, which suggests that the interstellar medium was not very well mixed at these early times. The purpose of this Letter is to help isolate, via a series of numerical experiments, some of the key processes that regulate turbulent mixing of SN elements in galactic disks. We study the gas interactions in small simulated patches of a galaxy disk with the goal of resolving the small-scale mixing effects of metals at parsec scales, which enables us to measure the turbulent diffusion coefficient in various galaxy environments. By investigating the statistics of variations of α elements in these simulations, we are able to derive constraints not only on the allowed range of intrinsic yield variations in SN explosions but also on the star formation history of the Milky Way. We argue that the observed dispersion of [Mg/Fe] in metal-poor halo stars is compatible with the star-forming conditions expected in dwarf satellites or in an early low-star-forming Milky Way progenitor. In particular, metal variations in stars that have not been phase-mixed can be used to infer the star-forming conditions of disrupted dwarf satellites.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Type Ia supernovae deflagration-to-detonation transition explosions powered by the Zel’dovich reactivity gradient mechanism

ABSTRACT Our aim in this work is to identify and explain the necessary conditions required for an energetic explosion of a Chandrasekhar-mass white dwarf. We construct and analyse weakly compressible turbulence models with nuclear burning effects for carbon/oxygen plasma at a density expected for the deflagration-to-detonation transition (DDT) to occur. We observe the formation of carbon deflagrations and transient carbon detonations at early times. As turbulence becomes increasingly inhomogeneous, sustained carbon detonations are initiated by the Zel’dovich reactivity gradient mechanism. The fuel is suitably preconditioned by the action of compressive turbulent modes with wavelength comparable to the size of resolved turbulent eddies; no acoustic wave is involved in this process. Oxygen detonations are initiated, aided either by reactivity gradients or by collisions of carbon detonations. The observed evolutionary time-scales are found to be sufficiently short for the above process to occur in the expanding, centrally ignited massive white dwarf. The inhomogeneous conditions produced prior to the DDT might be of consequence for the chemical composition of the outer ejecta regions of Type Ia supernovae from the single degenerate channel, and offer the potential for validation of the proposed model.

Brooker, E.↗
DOE OSTI2025

Strontium-84 Enrichments in Presolar Grains Provide First Evidence of p -process Nucleosynthesis in Core-collapse Supernovae

This study reports detection of rare p-process isotopes within presolar grains. Presolar grains are relic dust grains from dying stars. These microscopic dust particles are found in primitive solar system materials. Their distinct isotopic compositions record the nucleosynthetic processes in their parent stars and the Galactic chemical environment in which these stars formed. We studied presolar graphite grains of high-density type from the Murchison meteorite and found five grains with subgrains that show enrichments in 84 Sr compared to the solar abundance. 84 Sr is the neutron-deficient isotope of strontium that can be produced in the deep oxygen-rich interior of high-mass stars that end their lives as core-collapse supernovae. The observed 84 Sr excesses cannot be produced in low-mass asymptotic giant branch stars, the source of most high-density presolar graphites found in meteorites. High-density graphites with embedded 84 Sr excesses are, instead, compatible with a core-collapse supernovae origin. The graphite subgrains condensed from carbon-rich materials in the outer layers of core-collapse supernovae, where 84 Sr was destroyed by neutron captures during hydrostatic evolution of the stars and their final explosion. Based on current theoretical stellar models, a few percent of contribution from the inner regions of core-collapse supernovae, which are enriched in p-process nuclides, to the outer carbon-rich regions is the most likely explanation for the observed enrichment of 84 Sr in the subgrains of the high-density graphites. In this study, we present the first observational evidence that core-collapse supernovae produce and eject isotopes made by the p-process.

Astronomy and AstroPhysics↗
DOE OSTI2024

Identification of Suitable Vacuum Gas Oils as Plasticizers Using HT-GC × GC-HRMS

Vacuum gas oils (VGOs) have long been heralded as effective plasticizers due to their high boiling-points and lubricating properties. One of these VGOs, HyVac Oil 93050, is a paraffinic plasticizer that is currently utilized in polymer–plasticizer explosive formulations, while this oil effectively increases the elasticity and decreases the sensitivity for current formulations. We seek to identify alternative VGOs with similar density, viscosity, molecular composition, and impurities for future formulations. In this study, 18 VGOs, including HyVac Oil 93050, were initially evaluated for their density and viscosity. The oils were then ranked based on physical characteristics and analyzed for molecular composition using high-temperature comprehensive two-dimensional gas chromatography with high-resolution time-of-flight mass spectrometry (HT-GC × GC-HRMS). Further, the HT-GC × GC-HRMS chromatograms of the top 10 most similar VGOs to HyVac Oil 93050, according to density, were compared utilizing the Pearson correlation coefficient. Three of the oils with densities similar to those of HyVac Oil 93050 had a Pearson correlation within the lot-to-lot variation of HyVac Oil 93050. For the top 3 candidates, Pearson correlation was then utilized as a feature selection technique to discover significant chemical differences. Positive chemical ionization (PCI) and negative chemical ionization (NCI) HT-GC × GC-HRMS chromatograms were also evaluated and aided in the discovery and identification of several key compounds including additives that acted as stabilizers for the VGOs. After this further chemical analysis, two of the original 17 potential VGOs were determined to be physically and chemically similar to HyVac Oil 93050.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chromium Nucleosynthesis and Silicon–Carbon Shell Mergers in Massive Stars

In this work, we analyze the production of the element Cr in galactic chemical evolution (GCE) models using the NuGrid nucleosynthesis yields set. We show that the unusually large [Cr/Fe] abundance at [Fe/H] ≈ 0 reported by previous studies using those yields and predicted by our Milky Way model originates from the merging of convective Si-burning and C-burning shells in a 20 ${M}_{\odot }$ model at metallicity Z = 0.01, about an hour before the star explodes. This merger mixes the incomplete burning material in the Si shell, including 51 V and 52 Cr, out to the edge of the carbon/oxygen (CO) core. The adopted supernova model ejects the outer 2 ${M}_{\odot }$ of the CO core, which includes a significant fraction of the Cr-rich material. When including this 20 M⊙ model at Z = 0.01 in the yields interpolation scheme of our GCE model for stars between 15 and 25 ${M}_{\odot }$, we overestimate [Cr/Fe] by an order of magnitude at [Fe/H] ≈ 0 relative to observations in the Galactic disk. This raises a number of questions regarding the occurrence of Si–C shell mergers in nature, the accuracy of different simulation approaches, and the impact of such mergers on the presupernova structure and explosion dynamics. According to the conditions in this 1D stellar model, the substantial penetration of C-shell material into the Si shell could launch a convective–reactive global oscillation if a merger does take place. In any case, GCE provides stringent constraints on the outcome of this stellar evolution phase.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Investigation of the Impurities in Erythritol Tetranitrate (ETN) Using UHPLC-QTOF

In order to further gain a comprehensive chemical understanding of erythritol tetranitrate (ETN), the synthesis impurities of ETN were investigated using ultrahigh performance liquid chromatography with tandem high resolution mass spectrometry (UHPLC-MS/MS). A total of 12 impurities were identified relating to the synthesis of ETN. We have synthesized pure analytical standards of erythritol-1,4-dinitrate (1,4-EDiN) and erythritol-1,2,4-trinitrate (1,2,4-ETriN). Furthermore, these isomerically pure standards have allowed for confirmation of the identity of some of the discovered impurities. Additionally, partially nitrated with sulfate substituted erythritol was identified which is theorized to have formed from the incomplete displacement of the formed sulfate group on the alcohol position during nitration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploiting correlations in multi-coincidence Coulomb explosion patterns for differentiating molecular structures using machine learning

Coulomb explosion imaging (CEI) is a powerful technique for capturing the real-time motion of individual atoms during ultrafast photochemical reactions. CEI generates high-dimensional data with naturally embedded correlations that allow mapping the coordinated motion of nuclei in molecules. This enables reliable separation of competing reaction pathways and makes this approach uniquely suited for characterizing weak reaction channels. However, rich information contained in experimental CEI patterns remains largely underexploited due to challenges in visualizing correlations between multiple observables in multi-dimensional parameter space. Here we present a new approach to CEI of intermediate-sized polyatomic molecules, detecting up to eight ionic fragments in coincidence and leveraging machine-learning-based analysis to identify patterns and correlations in the resulting high-dimensional momentum-space data, enabling robust molecular structure identification and differentiation. Our approach provides high-dimensional background-free data encoding exceptionally rich structural information and establishes an automated, scalable framework for extracting insightful information from the data. As a demonstration, we apply this method to image and distinguish dichloroethylene isomers, showcasing its potential for broader applications in molecular imaging. Our results pave the way for channel-specific analysis of ultrafast structural dynamics in chemically relevant systems, particularly for disentangling mixed reaction pathways and detecting contributions from weak channels and minority species.

Chemical Physics (physics.chem-ph)↗