Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conditional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling Ni Coarsening and Migration in the Hydrogen Electrode of Solid oxide Cells under Operating Conditions

Ni coarsening and migration is the most important degradation in the hydrogen electrode of solid oxide cells. This presentation reviews our works on Ni coarsening and migration in NETL over the past years. We used simulation techniques including phase-field modeling and density function theory to investigate possible mechanisms of Ni coarsening and migration, including self-diffusion of Ni, diffusion of gaseous Ni(OH)2, surface diffusion of Ni(OH)x and Ni-YSZ wettability change, and examined the effect of operating conditions on these mechanisms. So far, none of the mechanisms can fully explain the experiments. Remaining questions and possible paths forward are summarized and discussed.

Lei, Yinkai↗
DOE OSTI2024

Determining Optimal Running Conditions for TinyTPC Detector

Liquid argon time projection chambers, (LArTPCs), are particle detectors used to collect ionization charge information from particle trajectories, facilitating detailed particle track analysis. They are currently used as particle detectors in major physics projects such as the deep underground neutrino experiment (DUNE), to detect and study the nature of the elusive neutrino particle. TinyTPC is a small scale LArTPC featuring a pixelated readout system (LArPix) that we will use to study liquid argon doping. We expect this doping to enhance the resolution of LAr detectors, especially for low energy particles below 10 MeV which would expand the capabilities of currently running experiments. Housed within a cryostat filled with liquid argon, the TinyTPC will rely on a high and a low voltage system to collect data. In preparation for deployment we found and resolved issues in the HV and LV systems and we determined optimal running conditions in a test vessel. This presentation will go over the detector commissioning process that enabled data taking with the TinyTPC.

Gonzalez, Rebecca↗
DOE OSTI2024

Muon Flux Variance from Severe Atmospheric Conditions

We analyze data from the European Centre for Medium-Range Weather Forecasts (ECMWF) and the QuarkNet Research Group at Fermilab to study the variance in muon flux due to extreme weather conditions. We considered three high-intensity storms for each season: winter, spring, and summer. The most significant observation was during winter, with a ~125% increase in muon flux corresponding to a temperature drop of ~20K. Additionally, we are developing CosmicWatch muon detectors to be used in tests for the MMBC/MAMBA Bubble Chamber. A pair of these detectors will be employed to trigger on muons, providing extremely precise and inexpensive tracking granularity in the form of a muon telescope.

Aamir, Yusuf↗
DOE OSTI2024

Complete Degradation of Be 2 C at Conditions Expected in Molten Salt Environments

This technical report is in submission of completion of the Level 3 milestone number M3AT24OR1101032, titled “Complete Degradation of Be 2 C at conditions expected in molten salt environments,” for the AT-24OR110103 “Beryllium Carbide as moderator for MSRs—ORNL” WBS number 2.04.11.01 within the larger Advanced Reactor Technologies program at Oak Ridge National Laboratory. This effort is an initial study of the viability of Be 2 C as a future neutron moderator for molten salt reactors and other high-temperature reactors. The research was awarded funding in September 2022, and this Level 2 milestone presents the work that completed by the end of July 2023. This work is a collaboration between Oak Ridge National Laboratory and the University of Michigan. This report discusses the status of this effort and planned work before the final reporting.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Integrated Carbon Capture and Propane Oxidative Dehydrogenation for Olefins Production under Isothermal Conditions over Cr₂O₃-ZSM-5/CaO-CaZrO₃ Reactive Capture Materials

Converting captured CO₂ into fuels and marketable chemicals using bifunctional materials (BFMs) represents a promising sustainable solution. In this study, a BFM composed of a Cr₂O₃/ZSM-5 catalyst and a CaO-CaZrO₃ sorbent was developed and tested for the integrated CO₂-oxidative dehydrogenation of propane (CO₂-ODHP) in a fixed bed reactor. The CaO-CaZrO₃ sorbent, prepared using the citrate sol-gel method, demonstrated high CO₂ adsorption capacity and improved cyclic stability compared to pure CaO. The BFM achieved 23.5% propane conversion, 52.5% propylene selectivity, and 68.7% olefin selectivity at isothermal adsorption-reaction conditions (630-630 °C). Overall, this study provides insights into enhancing CO2 adsorption and developing materials for integrated CO2 capture and conversion.

Baamran, Khaled↗
DOE OSTI2024

Application of aerosol-ice nucleating particle closure to establish the leading parameters governing ice crystal number concentration under commonly observed mixed-phase cloud conditions

This is the final technical report for DOE DE-SC0021034 award entitled “Application of aerosol-ice nucleating particle closure to establish the leading parameters governing ice crystal number concentration under commonly observed mixed-phase cloud conditions”. The overarching objective of this project was to gain a predictive understanding of the processes that lead from aerosols to ice-nucleating particles (INPs) to ice crystal number concentrations (ICNCs) in stratiform mixed-phase clouds where supercooled water droplets and ice crystals coexist, and to inform climate model parameterizations. During this four-year project we addressed the three main research goals of this objective: 1) Study the aerosol-INP link; 2) Develop an aerosol-cloud column model (AC-1D); and 3) Study the INP-ICNC link. Those activities significantly advanced our predictive understanding of how to represent INPs in could models and its implications on ice crystal number concentrations. The results have been published in five peer-reviewed publications with three more in review and preparation. It allowed for collaboration resulting in additional fourteen peer-reviewed publications that are concerned with the objective of this research project. This research has been communicated to the scientific community at national and international meetings and conferences by numerous talks, seminars, and posters including fifteen invited presentations. This project allowed training of four graduate students and one postdoctoral research associate resulting in one M.S. thesis and advancement to Ph.D. candidacy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Reservoir rocks interacting with CO2/brine under subsurface CO2 sequestration conditions

The Cedar Keys/Lawson formation in the U.S. is considered as a potential candidate host reservoir for carbon storage. Reporting the knowledge of geochemically induced changes to the permeability and porosity of host CO2 storage sandstone will enable us to gain a deeper insight of the long-term reservoir behavior under the CO2 storage conditions. This study suggests that mineral dissolution and mineral precipitation could occur in the host deposit altering its characteristics for CO2 storage over time.

Soong, Yee↗
DOE OSTI2024

Loss of Vacuum Condition for IER 479 [Slides]

Conservative thermal transient calculations and simulations show that a loss of vacuum condition would lead to a small (~6 °C) temperature differential across the Jemima Plates. Jemima plates would experience very low thermal stresses, well below the temperature differences of concern (>40 °C).

42 ENGINEERING↗
DOE OSTI2025

Modular Hydronic Room Conditioning System (CRADA NFE-24-10120 Final Report)

This project presents the development and validation of high-fidelity numerical models for fin-tube heat exchangers to enable accurate performance prediction and informed design optimization. The modeling framework integrates detailed geometric specifications, thermophysical property data, and system-level constraints to simulate the heat exchanger’s behavior under a range of operating conditions. The model is calibrated using real-world product specifications and validated against experimental data collected from controlled cooling and heating tests. In cooling mode, the model captures the overall trends in capacity and outlet air temperature but tends to underpredict latent effects, especially at lower air flow rates. In heating mode, the simulation consistently overestimates both the thermal capacity and outlet air temperature, indicating the need for refinement in air-side heat transfer assumptions. Despite these deviations, the model provides a solid foundation for optimization, allowing key design variables to be tuned within physical and performance-based constraints. This research advances the ability to simulate, validate, and optimize fin-tube heat exchanger designs with greater confidence and efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Modular Hydronic Room Conditioning System

This project presents the development and validation of high-fidelity numerical models for fin-tube heat exchangers to enable accurate performance prediction and informed design optimization. The modeling framework integrates detailed geometric specifications, thermophysical property data, and system-level constraints to simulate the heat exchanger’s behavior under a range of operating conditions. The model is calibrated using real-world product specifications and validated against experimental data collected from controlled cooling and heating tests. In cooling mode, the model captures the overall trends in capacity and outlet air temperature but tends to underpredict latent effects, especially at lower air flow rates. In heating mode, the simulation consistently overestimates both the thermal capacity and outlet air temperature, indicating the need for refinement in air-side heat transfer assumptions. Despite these deviations, the model provides a solid foundation for optimization, allowing key design variables to be tuned within physical and performance-based constraints. This research advances the ability to simulate, validate, and optimize fin tube heat exchanger designs with greater confidence and efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Degradation of Be 2 C at conditions expected in molten salt environments

This technical report is in submission of completion of the Level 4 milestone number M4AT-25OR1101021, titled “Degradation of Be 2 C at conditions expected in molten salt environments”, for the AT-25OR110102 “Beryllium Carbide as moderator for MSRs—ORNL” WBS number 2.04.11.01 within the larger Advanced Reactor Technologies program at Oak Ridge National Laboratory. This effort is an initial study of the viability of Be 2 C as a future neutron moderator for molten salt reactors and other high-temperature reactors. The research was awarded funding in September 2022, and this Level 4 milestone presents the work that completed by the end of July 2025. This work is a collaboration between Oak Ridge National Laboratory and the University of Michigan.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Ultrasonic Characterization of Lithium Ion Thermal Runaway Conditions for Real-time Ultrasonic Enabled BMS Integration

The demand for energy storage is growing, and lithium-ion batteries are a promising technology to meet this need due to their high power/energy density, high round-trip efficiency, rapid response time, and portability. However, recent catastrophic events caused by thermal runaway have slowed their adoption, highlighting the need for an early warning system for battery failure. In this work, ultrasound is used to detect physical changes in 950 mAh batteries by identifying material property changes independent of voltage and current. [Ultrasound signal features (e.g., time of flight, maximum frequency component) were extracted as the batteries were cycled and subjected to both constant current and constant voltage overcharge and were used to develop two metrics identifying failure: a warning to detect the start of overcharge and an emergency stop (E-stop) to immediately take the battery out of service. The identification method involved locating magnitude differences of several ultrasound features compared to baseline operation considering different currents and temperatures, and the warning/stopping metrics were consistent across all experiments. For an average overcharge time of 140 minutes, the average warning was issued 124 minutes before the failure and the average E-stop was triggered 94 minutes before failure. As a test of using ultrasound for early warning detection, a battery was forced into overcharge and returned to normal cycling conditions based on the previously determined warning metric. Both the voltage profile and the ultrasound measurements returned to their baseline behavior, indicating that ultrasonic detection can not only identify battery failure before a catastrophic event, but can also provide early enough warnings such that overcharges can be detected and corrected quickly enough so the battery does not need to be decommissioned.]

25 ENERGY STORAGE↗
DOE OSTI2026

Techno-Economic Analysis of Geologically Connected Seawater Air Conditioning (GeoSWAC) Concept for District Cooling at the University of Puerto Rico at Rio Piedras

At the University of Puerto Rico at Rio Piedras, a central chilled water plant supplies cooling to several campus buildings, contributing significantly to electricity demand during daytime peak hours, particularly in the summer months. These operational challenges are exacerbated by Puerto Rico's tropical rainforest climate and a power grid vulnerable to frequent disruptions caused by hurricanes and tropical storms. This study presents a techno-economic analysis of the existing chilled water plant serving four representative campus buildings and introduces a conceptual alternative: the Geologically connected Seawater Air Conditioning (GeoSWAC) system. GeoSWAC leverages stable low temperatures of deep ocean water (~1 km depth), hydraulically connected to an inland well, to deliver cooling without the use of vapor-compression refrigeration. Using modeled annual cooling loads and chiller performance data, capital costs, energy consumption, and levelized cost of cooling (LCOC) were evaluated for both systems. While GeoSWAC showed higher capital costs than the chiller-based scenario, operational costs were significantly lower at $26k-$53k annually, resulting in a lower LCOC between $2.3/MWh and $8.2/MWh compared to $30.2/MWh-$33.6/MWh for the chiller scenario. These results suggest that the GeoSWAC system offers a promising, low-energy, and climate-resilient alternative for large-scale cooling in tropical coastal environments, with significant potential to reduce peak electricity demand and improve long-term system reliability.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Exploring the Feasibility of Modern Fiber Optics in Offshore Mooring Condition Monitoring

This project explored the feasibility of using fiber-optic sensing technologies for condition monitoring of offshore synthetic mooring lines used in marine renewable energy systems. The work focused on evaluating optical fiber materials, interrogation methods, and rope-embedment approaches capable of enabling distributed strain or elongation measurements along mooring lines.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Application of printed strain gauges in prototypical nuclear reactor conditions

This report discusses the current development and testing of additively manufactured temperature sensors and resistive/ capacitive strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of in-pile monitoring of mechanical properties and structural health of materials and specimens in current and advanced nuclear test reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain (up to 1000 µe), high temperature (up to 700 °C)) to determine environmental factors that affect the performance of the strain gauge. The robustness and integrity of a printed strain gauge layer exposed to a molten salt environment for up to 500 hours was evaluated, with the goal of assessing material compatibility of printed strain sensors for instrumented surveillance test articles in molten salt reactors. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the additively manufactured strain gauge materials.

36 - MATERIALS SCIENCE↗
DOE OSTI2026

CFD Modeling of an 81" Single Slope Barrier Wall Drainage Window for on Grade and Sag Conditions

The main goal of this study is to design a drainage window in an 81" single slope barrier wall for on-grade and sag conditions that could replace the standard ODOT I-3 barrier catch basin. The ODOT design guidelines are as follows: a) Examine configurations of the opening to the flume behind the wall under the wall section to maximize conveyance of flow to a roadside ditch section. b) Examine window lengths and configurations to maximize hydraulic efficiency on a grade up to an absolute maximum window length of 20 ft. c) Use a minimum opening height of 4 in. and consider tapering to an increased height at the outlet to the flume to reduce the potential for debris clogging beneath the barrier section. On-grade locations are analyzed for longitudinal slope up to 5% and spread up to 10 ft. Sag locations, represented by pavement at zero longitudinal slope, are analyzed for water depths up to 18 in. The roadway cross section consists of a 10-ft shoulder at a 4.0% cross slope and pavement at a 1.6% cross slope. All surfaces are represented with Manning’s n = 0.015. Computational fluid dynamics (CFD) is used to perform the analysis. The modeling approach follows previous studies by the authors. The new design is similar to a slotted inlet: a rectangular opening cut into the bottom of a barrier (e.g., a temporary barrier or single slope barrier wall), which typically has a uniform cross section. Findings from laboratory tests of flow under Florida DOT barrier walls were used for additional validation of the modeling approach used in this study.

42 ENGINEERING↗
DOE OSTI2025

Optimizing Material Selection and Operational Conditions for XHV Systems: Lessons from AISI 1020 and 316L Comparative Studies

In this study, AISI 1020 low-carbon steel is investigated as a cost-effective alternative to SS316 stainless steel for reaching extreme high vacuum (XHV) conditions. After being baked at 400°C, a vacuum chamber made of the low-carbon steel material exhibited an outgassing rate approximately 2000 times smaller than a similar chamber made of stainless steel. Its activation energy for hydrogen diffusion (27 kJ/mol) is less than half that of stainless steel (60.3 kJ/mol), indicating more efficient hydrogen removal during bakeout. MolFlow+ simulations supported the experimental data and demonstrated the importance of system geometry optimization and minimizing stainless steel content for achieving optimal vacuum performance. AISI 1020's magnetic properties, typically considered disadvantageous for accelerator applications, could benefit spin-polarized electron sources by shielding photocathodes from stray fields while simultaneously providing improved vacuum through reduced outgassing. To optimize AISI 1020's performance in XHV systems, practical considerations include pre-baking protocols and careful system design to minimize stainless steel components.

Al-Allaq, Aiman H.↗