Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Movement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optimizing aircraft flows at airports using data driven predicted capabilities

A method for safe and efficient use of airport runway capacity includes receiving, at an air traffic control system at an airport, airport data related to movement areas of the airport, time data related to a time period, aircraft data related to a plurality of aircraft expected to operate into and out of the airport during the time period, and environmental data related to environmental conditions predicted for the airport during the time period. The method further includes computing a probability distribution for inter-aircraft spacing by applying the airport data, the time data, the aircraft data, and the environmental data to a trained Bayesian network, producing the probability distribution for the inter-aircraft spacing as an output observation of the trained Bayesian network, and, using the probability distribution and a confidence value, identifying an inter-aircraft spacing value for the plurality of aircraft expected to operate into and out of the airport during the time period.

Sweet, Douglas↗
NASA NTRS1978

The behavior of a convergent plate boundary - Crustal deformation in the South Kanto district, Japan

The northwesternmost part of the Sagami trough, a part of the Philippine Sea-Eurasian plate boundary, was ruptured during the great South Kanto earthquake in 1923. Very extensive and frequent geodetic measurements of crustal deformation have been made in the South Kanto district since the 1890's, and these constitute the most complete data set on crustal movements in the world. These data were reanalyzed and interpreted and according to our interpretation indicate the following sequence of events. The coseismic movements were due to oblique thrust and right lateral slip of about 8 m on a fault outcropping at the base of the Sagami trough. This was followed by postseismic deformation resulting from reversed afterslip of 20-60 cm that occurred at an exponentially decaying rate in time. The interseismic deformation is produced by steady subduction at a rate of about 1.8 cm/yr. During subduction the top 10-15 km of the plate boundary is apparently locked, while deeper parts slip aseismically at an irregular rate. No significant precursory deformation was observed. The recurrence time for 1923 type earthquakes is 200-300 years. The Boso and Miura peninsulas are broken into a series of fault-bound blocks that move semi-independently of the surrounding region. The subduction zone itself, where it is exposed on land, is shown to be a wide zone encompassing several faults that are active at different times.

Scholz, C. H.↗
DOE OSTI2021

Infrared intrusion detection system (IRIDS)

A system and method for intrusion detection includes an imager directed towards an object in an interior space. The imager is in data communication with a computer. The computer is arranged to process digital three-dimensional image data received from the imager and programmed to execute a change detection algorithm in response to the processed three-dimensional data to determine movement of the object. The computer generates an alarm output in response to detecting movement of the object above a predetermined threshold. The method includes providing an imager directed towards an object in an interior space; receiving Time of Flight signals by the imager; processing digital three-dimensional image data received from the imager; and executing a change detection algorithm in response to the processed three-dimensional data to determine movement of the object.

Russell, John L.↗
NASA NTRS1975

Satellite animal tracking feasibility studies

A study was initiated in Tsavo National Park to determine movements and home ranges of individual elephants and their relations to overall distribution patterns and environmental factors such as rainfall. Methods used were radio tracking and observations of visually identifiable individuals. Aerial counts provided data on overall distribution. Two bulls and two cows were radio-tagged in Tsavo West and two bulls and four cows in Tsavo East, providing home range and movement data. The movements of individuals were useful in interpreting relatively major shifts in elephant distribution. Results point to the following preliminary conclusions: (1) elephants in the Tsavo area undertook long distance movements in fairly direct response to localized rainfall; (2) a subdivision of the overall population into locally distinct units may exist during the dry season but did not occur after significant rainfall; and (3) food appears to be the primary factor governing movements and distribution of elephants in the area.

Buechner, H. K.↗
DOE OSTI2021

Understanding collective human movement dynamics during large-scale events using big geosocial data analytics

Conventional approaches for modeling human mobility pattern often focus on human activity and movement dynamics in their regular daily lives and cannot capture changes in human movement dynamics in response to large-scale events. With the rapid advancement of information and communication technologies, many researchers have adopted alternative data sources (e.g., cell phone records, GPS trajectory data) from private data vendors to study human movement dynamics in response to large-scale natural or societal events. Big geosocial data such as georeferenced tweets are publicly available and dynamically evolving as real-world events are happening, making it more likely to capture the real-time sentiments and responses of populations. However, precisely-geolocated geosocial data is scarce and biased toward urban population centers. In this research, we developed a big geosocial data analytical framework for extracting human movement dynamics in response to large-scale events from publicly available georeferenced tweets. The framework includes a two-stage data collection module that collects data in a more targeted fashion in order to mitigate the data scarcity issue of georeferenced tweets; in addition, a variable bandwidth kernel density estimation(VB-KDE) approach was adopted to fuse georeference information at different spatial scales, further augmenting the signals of human movement dynamics contained in georeferenced tweets. To correct for the sampling bias of georeferenced tweets, we adjusted the number of tweets for different spatial units (e.g., county, state) by population. To demonstrate the performance of the proposed analytic framework, we chose an astronomical event that occurred nationwide across the United States, i.e., the 2017 Great American Eclipse, as an example event and studied the human movement dynamics in response to this event. Finally, this analytic framework can easily be applied to other types of large-scale events such as hurricanes or earthquakes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Estimating County-Level Farm-Based Agricultural Commodity Movements

The Freight Analysis Framework (FAF), a nation-wide commodity-based freight flow database, is the only publicly available data source that provides a comprehensive resource of national freight movement data. The FAF estimates origin-destination (O-D) commodity flows between states, sub-state regions, and major international gateways. Recently, there are emerging needs of the FAF data at a more detailed geographical level than is presently available. Taking the agricultural commodities as an example, this study presents a disaggregation approach that aims at disaggregating the existing zone-level commodity flows to county-level commodity flows. With limited agricultural commodity data and statistics, the disaggregation process includes three major steps: (1) estimation of county-level agricultural commodity production at origins, (2) estimation of county-level agricultural commodity attraction to destinations, and (3) estimation of county-level origin-destination agricultural commodity flows. The disaggregation process is applied to major farm-based agricultural products considered in the FAF. This paper discusses the process and illustrates the resulting geographic distributions of county-level agricultural commodity production and attraction. A few examples of county-level flows between origins and destinations are also presented.

Xie, Fei↗
DOE OSTI2020

Production Operations Management System (POMS) for Fermilab Experiments

The Production Operations Management System (POMS) software allows production teams and analysis groups across multiple Fermilab experiments to launch, modify and monitor large scale campaigns of related Monte Carlo or data processing jobs, and currently manages the majority of production computing of experiments at Fermilab.POMS provides a web service interface that enables automated job submission on distributed resources according to customers’ requests, as well as subsequent monitoring of those submissions as well as recovery of failed submissions, debugging and record keeping.POMS interfaces with existing HEP data access, processing, movement and monitoring tools at Fermilab, including Jobsub (for job submission), SAM (for data management), and Landscape (for monitoring), and in combination with them handles the creation of intermediate datasets of files for multistage campaigns.POMS visualizes these campaigns with an interactive GUI interface. An important feature of POMS is a one-to-one connection between the GUI campaign visualizer and a text based representation of the complete campaign configuration. An extensible library of template campaign configurations is available. The templates are user modifiable and map cleanly to and from the GUI description of the campaign.This paper will discuss the current usage, history, and some technical details of POMS, as well as planned future extensions, particularly interfacing with Rucio as well as SAM for file movement.

Mengel, Marc↗
DOE OSTI2023

Reproduction drives changes in space use and habitat selection in a highly adaptable invasive mammal

Abstract For ungulates, it is not well understood how the interaction between habitat and reproduction affects movement behavior, space use, and habitat selection. We used known parturition (farrowing) data to validate First Passage Time (FPT) movement analysis to identify wild pig (Sus scrofa) parturition events from data collected with GPS collars. We examined home range and habitat selection during three physiologically distinct time periods in the reproductive cycle: late-gestation; farrowing; and neonate-care period. Sows exhibited a behavioral change 1-2 days prior to farrowing, suggesting FPT analysis can reliably identify parturition events for wide-ranging species that have a focused birthing area. Home range was smallest during the farrowing period, likely reflective of nest building, parturition, and protection of neonates. Home range size during the neonate-care period was intermediate between the late-gestation and farrowing periods, indicative of offspring care that may restrict maternal movement. Across all periods, sows avoided developed areas that have sparse canopy and ground cover and are associated with human activities. During late-gestation, sows avoided pine forests that have an open understory and less vegetative cover. During late-gestation and neonate-care, sows selected bottomland hardwood forests, habitat associated with ample food, cover, and water. During farrowing and neonate-care periods, sows selected upland hardwood forests, habitat with high quality food and cover for neonates. The physiological requirements of reproduction drive female habitat selection and spatial scale of movement patterns associated with parturition. Our study contributes to delineation of the appropriate scale at which to analyze movement data to provide insight about where individuals chose to place their home range, how much space to use, and how they use resources on the landscape to maximize reproductive success and fitness.

Zoology↗
NASA NTRS1983

Reports on crustal movements and deformations

This Catalog of Reports on Crustal Movements and Deformation is a structured bibliography of scientific papers on the movements of the Earth crust. The catalog summarizes by various subjects papers containing data on the movement of the Earth's surface due to tectonic processes. In preparing the catalog we have included studies of tectonic plate motions, spreading and convergence, microplate rotation, regional crustal deformation strain accumulation and deformations associated with the earthquake cycle, and fault motion. We have also included several papers dealing with models of tectonic plate motion and with crustal stress. Papers which discuss tectonic and geologic history but which do not present rates of movements or deformations and papers which are primarily theoretical analyses have been excluded from the catalog. An index of authors cross-referenced to their publications also appears in the catalog. The catalog covers articles appearing in reviewed technical journals during the years 1970-1981. Although there are citations from about twenty journals most of the items come from the following publications: Journal of Geophysical Research, Tectonophysics, Geological Society of America Bulletin of the Seismological Society of America, Nature, Science, Geophysical Journal of the Royal Astronomical Society, Earth and Planetary Science Letters, and Geology.

Cohen, S. C.↗
NASA NTRS2024

Presound: UAV Diagnostic System Enabled by Vibration-Based Machine Learning

A low-weight, inexpensive small unmanned aerial system (sUAS) that takes off, performs a mission, lands, and safely stows and recharges itself has myriad future applications ranging from agricultural imaging to last-mile package delivery. Likewise, Urban Air Mobility (UAM) systems will enable people to take air taxis from point to point in cities, rapidly moving commuters long distances without concern for road traffic and congestion. Fully electric aviation systems will be cleaner and quieter than ground transport. Cities could eliminate cars and buses, and convert roads to higher capacity bike and pedestrian throughways. Yet, for sUAS as well as UAM, system reliability and assurance is a limiting factor to deploying affordable autonomous flight systems. For this bright future of aviation to be realized, aircraft must be able to autonomously and accurately self-diagnose health issues both before takeoff and during flight. The GreenSight PreSound system is designed to identify defects on aircraft through intelligent analysis of vibration. It accomplishes this by measuring structural vibrations induced by the vehicle’s own propellers, and analyzing that data using a machine learning model that determines whether a defect is present. The PreSound system is designed to require no human oversight, and to operate across a wide array of vehicles through re-training of the model for each target aircraft. PreSound has been developed and seen limited early success using data collected from the GreenSight Dreamer sUAS, a 5lb quadrotor vehicle designed for aerial imaging applications. The final detection model, trained on data with props spinning at 50% throttle, achieves excellent performance with over 99% average accuracy in detecting blade damage using a single FFT vector input. It demonstrates the ability to generalize to new types of blade damage, correctly classifying a different type of blade damage with 98% accuracy. Full test pulses were classified with 100% accuracy, and in live testing, all sets of data during blade movement were classified accurately with over 95% confidence. When trained on in-flight data, the same model achieves an average accuracy of 85% in distinguishing between undamaged and blade-damaged states in flight. The authors believe that these accuracies show significant potential of this approach to expand unmanned flight safety, with significant potential benefits in accelerating Advanced Aerial Mobility (AAM) and UAM aviation applications.

UAS↗
DOE OSTI2022

Integrating data types to estimate spatial patterns of avian migration across the Western Hemisphere

For many avian species, spatial migration patterns remain largely undescribed, especially across hemispheric extents. Recent advancements in tracking technologies and high-resolution species distribution models (i.e., eBird Status and Trends products) provide new insights into migratory bird movements and offer a promising opportunity for integrating independent data sources to describe avian migration. Here, we present a three-stage modeling framework for estimating spatial patterns of avian migration. First, we integrate tracking and band re-encounter data to quantify migratory connectivity, defined as the relative proportions of individuals migrating between breeding and nonbreeding regions. Next, we use estimated connectivity proportions along with eBird occurrence probabilities to produce probabilistic least-cost path (LCP) indices. In a final step, we use generalized additive mixed models (GAMMs) both to evaluate the ability of LCP indices to accurately predict (i.e., as a covariate) observed locations derived from tracking and band re-encounter data sets versus pseudo-absence locations during migratory periods and to create a fully integrated (i.e., eBird occurrence, LCP, and tracking/band re-encounter data) spatial prediction index for mapping species-specific seasonal migrations. To illustrate this approach, we apply this framework to describe seasonal migrations of 12 bird species across the Western Hemisphere during pre- and postbreeding migratory periods (i.e., spring and fall, respectively). We found that including LCP indices with eBird occurrence in GAMMs generally improved the ability to accurately predict observed migratory locations compared to models with eBird occurrence alone. Using three performance metrics, the eBird + LCP model demonstrated equivalent or superior fit relative to the eBird-only model for 22 of 24 species–season GAMMs. In particular, the integrated index filled in spatial gaps for species with over-water movements and those that migrated over land where there were few eBird sightings and, thus, low predictive ability of eBird occurrence probabilities (e.g., Amazonian rainforest in South America). This methodology of combining individual-based seasonal movement data with temporally dynamic species distribution models provides a comprehensive approach to integrating multiple data types to describe broad-scale spatial patterns of animal movement. Further development and customization of this approach will continue to advance knowledge about the full annual cycle and conservation of migratory birds.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Black-box statistical prediction of lossy compression ratios for scientific data

Lossy compressors are increasingly adopted in scientific research, tackling volumes of data from experiments or parallel numerical simulations and facilitating data storage and movement. In contrast with the notion of entropy in lossless compression, no theoretical or data-based quantification of lossy compressibility exists for scientific data. Users rely on trial and error to assess lossy compression performance. As a strong data-driven effort toward quantifying lossy compressibility of scientific datasets, we provide a statistical framework to predict compression ratios of lossy compressors. Our method is a two-step framework where (i) compressor-agnostic predictors are computed and (ii) statistical prediction models relying on these predictors are trained on observed compression ratios. Proposed predictors exploit spatial correlations and notions of entropy and lossyness via the quantized entropy. We study 8+ compressors on 6 scientific datasets and achieve a median percentage prediction error less than 12%, which is substantially smaller than that of other methods while achieving at least a 8.8× speedup for searching for a specific compression ratio and 7.8× speedup for determining the best compressor out of a collection.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2025

Influence of Actuator Movement Rate During Acquisition of Inlet Characterization Data

This report considers using a process to acquire performance data for supersonic mixed-compression inlets that is faster and less costly than the previous process. In the previous process for acquiring data during wind tunnel experiments, actuators for backpressuring an inlet moved in discrete increments, paused for dynamics to dampen, measured data for 5 s, recorded the data, and then reduced the data to graphic plots of pressure recovery versus mass capture ratio. This discrete data acquisition procedure was methodical, reliable, and accurate. However, acquiring data to characterize the inlet consumed significant wind-on time. Wind tunnel operation was costly when considering maintenance, energy, and human resources (operators and research team); therefore, the price for each data point was high. This report presents a quicker method to obtain all measurements, one which can also be used in blowdown wind tunnels. This approach, identified as the dynamic inlet characteristic data acquisition procedure, uses in situ dynamic high-speed pressure sensors to measure pressure signals. The backpressuring actuator moves continuously, and measurements from high-speed pressure sensors are recorded as the actuator progresses to and past the incremental points. Despite its advantages, the approach raised the following questions: (1) Will the new process be as accurate as the previous process? and (2) Are there any hidden costs? These concerns are addressed in this report. This report reviews a study that was undertaken to compare wind tunnel experiment data taken using the previous discrete data acquisition procedure with data recorded using the dynamic inlet characterization data acquisition procedure. In this report, the wind tunnel experiment and the study objectives are described. The processes to reduce the data for analysis are explained, and a discussion of the results is given. Finally, conclusions from this study that may guide further work in this area are presented.

Inlet Characterization Curves↗
NASA NTRS1983

Signal processing of anthropometric data

The Anthropometric Measurements Laboratory has accumulated a large body of data from a number of previous experiments. The data is very noisy, therefore it requires the application of some signal processing schemes. Moreover, it was not regarded as time series measurements but as positional information; hence, the data is stored as coordinate points as defined by the motion of the human body. The accumulated data defines two groups or classes. Some of the data was collected from an experiment designed to measure the flexibility of the limbs, referred to as radial movement. The remaining data was collected from experiments designed to determine the surface of the reach envelope. An interactive signal processing package was designed and implemented. Since the data does not include time this package does not include a time series element. Presently the results is restricted to processing data obtained from those experiments designed to measure flexibility.

Zimmermann, W. J.↗
DOE OSTI2021

The Role of Mobility Data Hubs in an Integrated Decarbonized Transportation Future

The landscape for connected mobility ecosystems is evolving rapidly as information and communication technologies lower the cost and complexity of connecting people to places, integrating transportation modes and collecting data regarding such movements. These developments have been key to unlocking new business opportunities, particularly through mobility services. While the mechanisms for data collection, processing, and transfer have made significant advances in the past decade, the broader landscape of mobility data architectures and data users remains largely unresolved. It is unclear as to whether the result will converge towards a framework that resembles a coherent quilt or a disjointed patchwork of competing visions. Initial approaches to mobility data collection and provisioning have been largely siloed - by mode or software - or held for exclusive use, however several key players are quickly realizing the need and opportunities enabled through integrated mobility data eco-systems, or mobility data hubs as referred to in this paper. As the business case for hosting mobility data hubs evolves, there is great uncertainty regarding their impact to either advance or exacerbate sustainable mobility (e.g., seamless connectivity across modes, decreased energy consumption and greenhouse gas emissions, etc.). Groups such as the United Nations and World Bank have identified data platforms as a key enabler of realizing environmental and social benefits. If designed with decarbonization in mind, we hypothesize that enhanced observability provided by these ever-expanding mobility data hubs can facilitate energy and emissions reductions that are otherwise limited by transactional barriers and knowledge asymmetry that is inherent to a more siloed approach. In this sense, integration of mobility data can help to create a competitive playing field where value is not determined by exclusivity of data, but rather the quality and uniqueness of a given service. The goals of this paper are to 1) identify key players and data architectures that are emerging in a service-based mobility market, 2) explore several use cases where mobility data hubs have enabled greater sustainability outcomes, and 3) discuss key issues that will need to be resolved to fully leverage emerging mobility data hubs towards a sustainable transportation future.

ADVANCED PROPULSION SYSTEMS,MATHEMATICS AND COMPUT↗
DOE OSTI2016

Open Data and the Free Access to Law Movement in the United States

US President Barack Obama issued Executive Order 13642-Making Open and Machine Readable the New Default for Government - on May, 9 2013, mandating, wherever legally permissible and possible, that US Government information be made open to the public.[1] This edict accelerated the construction of and framework for data repositories, and data citation principles and practices, such as data.gov. As a corollary, researchers across the country's national laboratories found themselves creating data management plans, applying data set metadata standards, and ensuring the long-term access of data for federally funded scientific research.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
NASA NTRS2013

Understanding the Effects of Spaceflight on Head-trunk Coordination during Walking and Obstacle Avoidance

Prolonged exposure to spaceflight conditions results in a battery of physiological changes, some of which contribute to sensorimotor and neurovestibular deficits. Upon return to Earth, functional performance changes are tested using the Functional Task Test (FTT), which includes an obstacle course to observe post‐flight balance and postural stability, specifically during turning. Aims: To quantify changes in movement strategies during turning events by observing the latency between head‐andtrunk coordinated movement. Hypothesis: It is hypothesized that subjects experiencing neurovestibular adaptations will exhibit head‐to‐trunk locking ('en bloc' movement) during turning, exhibited by a decrease in latency between head and trunk movement. Sample: FTT data samples were collected from Shuttle and ISS missions. Samples were analyzed three times pre exposure, immediately post‐exposure (0 or 1 day post) and 2‐to‐3 times during recovery from the microgravity environment. Methods: Two 3D inertial measurements units (XSens MTx) were attached to subjects, one on the head and one on the upper back. This study focused primarily on the yaw movements about the subject's center of rotation. Time differences (latency) between head and trunk movement were calculated at two points: the first turn (Fturn) to enter the obstacle course (approximately 90⁰ turn) and averaged across a slalom obstacle portion, consisting of three turns (approximately three 90⁰ turns). Results: Preliminary analysis of the data shows a trend toward decreasing head‐to‐trunk movement latency during post‐flight ambulation, after reintroduction to Earth gravity in Shuttle and ISS astronauts. Conclusion: It is clear that changes in movement strategies are adopted during exposure to the microgravity environment and upon reintroduction to a gravity environment. Some subjects exhibit symptoms of neurovestibular neuropathy ('en bloc movement') that may impact their ability to perform post‐flight functional tasks.

Madansingh, S.↗