Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Flux and Polarization Variability of OJ 287 during the Early 2016 Outburst

The gamma-ray blazar OJ 287 was in a high activity state during 2015 December–2016 February. Coinciding with this high brightness state, we observed this source for photometry on 40 nights in R -band and for polarimetry on nine epochs in UBV RI bands. During the period of our observations, the source brightness varied from 13.20±0.04 mag to 14.98±0.04 mag and the degree of polarization ( P ) fluctuated between 6.0%±0.3% and 28.3%±0.8% in R -band. Focusing on intranight optical variability (INOV), we find a duty cycle of about 71% using χ {sup 2}-statistics, similar to that known for blazars. From INOV data, the shortest variability timescale is estimated to be 142±38 minutes, yielding a lower limit of the observed Doppler factor δ {sub 0}=1.17, the magnetic field strength B≤3.8 G, and the size of the emitting region R{sub s}<2.28× 10{sup 14} cm. On internight timescales, a significant anticorrelation between R -band flux and P is found. The observed P at U -band is generally larger than that observed at longer-wavelength bands, suggesting a wavelength-dependent polarization. Using V -band photometric and polarimetric data from Steward Observatory obtained during our monitoring period, we find a varied correlation between P and V -band brightness. While an anticorrelation is sometimes seen between P and V -band magnitude, no correlation is seen at other times, thereby suggesting the presence of more than one short-lived shock component in the jet of OJ 287.

79 ASTRONOMY AND ASTROPHYSICS↗

Modular machine learning-based elastoplasticity: Generalization in the context of limited data

The development of highly accurate constitutive models for materials that undergo path-dependent processes continues to be a complex challenge in computational solid mechanics. Challenges arise both in considering the appropriate model assumptions and from the viewpoint of data availability, verification, and validation. Recently, data-driven modeling approaches have been proposed that aim to establish stress-evolution laws that avoid user-chosen functional forms by relying on machine learning representations and algorithms. However, these approaches not only require a significant amount of data but also need data that probes the full stress space with a variety of complex loading paths. Furthermore, they rarely enforce all necessary thermodynamic principles as hard constraints. Hence, they are in particular not suitable for low-data or limited-data regimes, where the first arises from the cost of obtaining the data and the latter from the experimental limitations of obtaining labeled data, which is commonly the case in engineering applications. In this work, we discuss a hybrid framework that can work on a variable amount of data by relying on the modularity of the elastoplasticity formulation where each component of the model can be chosen to be either a classical phenomenological or a data-driven model depending on the amount of available information and the complexity of the response. The method is tested on synthetic uniaxial data coming from simulations as well as cyclic experimental data for structural materials. The discovered material models are found to not only interpolate well but also allow for accurate extrapolation in a thermodynamically consistent manner far outside the domain of the training data. This ability to extrapolate from limited data was the main reason for the early and continued success of phenomenological models and the main shortcoming in machine learning-enabled constitutive modeling approaches. Training aspects and details of the implementation of these models into Finite Element simulations are discussed and analyzed.

42 ENGINEERING↗

ON THE NOTION OF WELL-DEFINED TECTONIC REGIMES FOR TERRESTRIAL PLANETS IN THIS SOLAR SYSTEM AND OTHERS

A model of coupled mantle convection and planetary tectonics is used to demonstrate that history dependence can outweigh the effects of a planet's energy content and material parameters in determining its tectonic state. The mantle convection-surface tectonics system allows multiple tectonic modes to exist for equivalent planetary parameter values. The tectonic mode of the system is then determined by its specific geologic and climatic history. This implies that models of tectonics and mantle convection will not be able to uniquely determine the tectonic mode of a terrestrial planet without the addition of historical data. Historical data exists, to variable degrees, for all four terrestrial planets within our solar system. For the Earth, the planet with the largest amount of observational data, debate does still remain regarding the geologic and climatic history of Earth's deep past but constraints are available. For planets in other solar systems, no such constraints exist at present. The existence of multiple tectonic modes, for equivalent parameter values, points to a reason why different groups have reached different conclusions regarding the tectonic state of extrasolar terrestrial planets larger than Earth ({sup s}uper-Earths{sup )}. The region of multiple stable solutions is predicted to widen in parameter space for more energetic mantle convection (as would be expected for larger planets). This means that different groups can find different solutions, all potentially viable and stable, using identical models and identical system parameter values. At a more practical level, the results argue that the question of whether extrasolar terrestrial planets will have plate tectonics is unanswerable and will remain so until the temporal evolution of extrasolar planets can be constrained.

79 ASTRONOMY AND ASTROPHYSICS↗

Inclusive electron scattering from nuclei in the quasielastic region at large momentum transfer

Experiment E02-019, performed in Hall C at the Thomas Jefferson National Accelerator Facility (TJNAF), was a measurement of inclusive electron cross sections for several nuclei ( 2 H, 3 He, 4 He, 9 Be, 12 C, 63 Cu, and 197 Au) in the quasielastic region at high momentum transfer. In the region of low energy transfer, the cross sections were analyzed in terms of the reduced response, F(y), by examining its y-scaling behavior. The data were also examined in terms of the nuclear structure function νW A 2 and its behavior in x and the Nachtmann variable ξ. The data show approximate scaling of νW A 2 in ξ for all targets at all kinematics, unlike scaling in x, which is confined to the DIS regime. However, y-scaling observations are limited to the kinematic region dominated by the quasielastic response (y <0), where some scaling violations arising from FSIs are observed.

43 PARTICLE ACCELERATORS↗

TYPE II CEPHEID CANDIDATES. IV. OBJECTS FROM THE NORTHERN SKY VARIABILITY SURVEY

We have obtained VR photometry of 447 Cepheid variable star candidates with declinations north of -14 Degree-Sign 30', most of which were identified using the Northern Sky Variability Survey (NSVS) data archive. Periods and other photometric properties were derived from the combination of our data with the NSVS data. Atmospheric parameters were determined for 81 of these stars from low-resolution spectra. The identification of type II Cepheids based on the data presented in all four papers in this series is discussed. On the basis of spectra, 30 type II Cepheids were identified while 53 variables were identified as cool, main sequence stars and 283 as red giants following the definitions in Paper III. An additional 30 type II Cepheids were identified on the basis of light curves. The present classifications are compared with those from the Machine-learned All Sky Automated Survey Classification Catalog for 174 stars in common.

79 ASTRONOMY AND ASTROPHYSICS↗

DynPaC: Coarse-Grained, Dynamic, and Partially Reconfigurable Array for Streaming Applications

Coarse-grained reconfigurable arrays (CGRAs) provide higher flexibility than application-specific integrated circuits (ASICs) and higher efficiency than fine-grained reconfigurable devices such as Field Programmable Gate Arrays (FPGAs). However, CGRAs are generally designed to support offloading of a single kernel. While their design, based on communicating functional units, appears to naturally suit streaming applications composed of multiple cooperating kernels, current approaches only statically partition the resources across kernels. However, streaming applications often are data-dependent, leading to variable kernel execution times depending on the input data and impacting the throughput of the entire pipeline if resources are statically allocated. Therefore, in this paper, we discuss the design of DynPaC — a coarse-grained, dynamically, and partially reconfigurable array for data-dependent streaming applications. We discuss the required software and hardware components to manage partial dynamic reconfiguration. We demonstrate that by supporting partial dynamic reconfiguration, we can obtain an average speedup of 1.44X for a representative set of applications w.r.t. static partitioning, with a limited area overhead (6.4% of the entire chip).

Tan, Cheng↗

Lidar - ESRL WindCube 200s, Wasco Airport - Derived Data

The available "readme" file introduces the basics of the Doppler lidar data and offers a detailed description of the variables present in the data files. If you have any further questions about the data and its interpretation, contact either Alan Brewer ( ) or Aditya Choukulkar ( ). It is highly recommended to discuss any planned use of the data with NOAA-CSD scientists. For more information, refer to the attached readme.

17 WIND ENERGY↗

Lidar - ESRL WindCube 200s, Wasco Airport - Reviewed Data

The available "Readme" file introduces the basics of the Doppler lidar data and offers a detailed description of the variables present in the data files. For those with any further questions about the data and its interpretation, contact either Alan Brewer ( ) or Sunil Baidar ( ). It is highly recommended to discuss any planned use of the data with National Oceanic and Atmospheric Administration-Chemical Sciences Division (NOAA-CSD) scientists. For more information, refer to the Readme file: "noaa-esrl-wascolidar-readme-1.pdf."

17 WIND ENERGY↗

Lidar - ESRL WindCube 200s, Arlington Airport - Reviewed Data

The available "readme" file introduces the basics of the Doppler lidar data and offers a detailed description of the variables present in the data files. For those with any further questions about the data and its interpretation, contact either Alan Brewer ( ) or Sunil Baidar ( ). It is highly recommended to discuss any planned use of the data with National Oceanic and Atmospheric Administration-Chemical Sciences Division (NOAA-CSD) scientists. For more information, refer to the Readme file: "noaa-esrl-arlingtonlidar-readme-1.pdf."

17 WIND ENERGY↗

Lidar - ESRL WindCube 200s, Wasco Airport - Processed Data

The available "Readme" file introduces the basics of the Doppler lidar data and offers a detailed description of the variables present in the data files. For those with any further questions about the data and its interpretation, contact either Alan Brewer ( ) or Sunil Baidar ( ). It is highly recommended to discuss any planned use of the data with National Oceanic and Atmospheric Administration-Chemical Sciences Division (NOAA-CSD) scientists. For more information, refer to the Readme file: "noaa-esrl-wascolidar-readme.docx."

17 WIND ENERGY↗

Lidar - ESRL WindCube 200s, Arlington Airport - Processed Data

The available "readme" file introduces the basics of the Doppler lidar data and offers a detailed description of the variables present in the data files. If you have any further questions about the data and its interpretation, contact either Alan Brewer ( ) or Sunil Baidar ( ). It is highly recommended to discuss any planned use of the data with NOAA-CSD scientists. For more information, refer to the attached readme.

17 WIND ENERGY↗

Regional evapotranspiration from an image-based implementation of the Surface Temperature Initiated Closure (STIC1.2) model and its validation across an aridity gradient in the conterminous US

Recent studies have highlighted the need for improved characterizations of aerodynamic conductance and temperature (g A and T 0 ) in thermal remote-sensing-based surface energy balance (SEB) models to reduce uncertainties in regional-scale evapotranspiration (ET) mapping. By integrating radiometric surface temperature (TR) into the Penman–Monteith (PM) equation and finding analytical solutions of gA and T0, this need was recently addressed by the Surface Temperature Initiated Closure (STIC) model. However, previous implementations of STIC were confined to the ecosystem-scale using flux tower observations of infrared temperature. This study demonstrates the first regional-scale implementation of the most recent version of the STIC model (STIC1.2) that integrates the Moderate Resolution Imaging Spectroradiometer (MODIS) derived TR and ancillary land surface variables in conjunction with NLDAS (North American Land Data Assimilation System) atmospheric variables into a combined structure of the PM and Shuttleworth–Wallace (SW) framework for estimating ET at 1 km × 1 km spatial resolution. Evaluation of STIC1.2 at 13 core AmeriFlux sites covering a broad spectrum of climates and biomes across an aridity gradient in the conterminous US suggests that STIC1.2 can provide spatially explicit ET maps with reliable accuracies from dry to wet extremes. When observed ET from one wet, one dry, and one normal precipitation year from all sites were combined, STIC1.2 explained 66 % of the variability in observed 8-day cumulative ET with a root mean square error (RMSE) of 7.4 mm/8-day, mean absolute error (MAE) of 5 mm/8-day, and percent bias (PBIAS) of -4 %. These error statistics showed relatively better accuracies than a widely used but previous version of the SEB-based Surface Energy Balance System (SEBS) model, which utilized a simple NDVI-based parameterization of surface roughness (z OM ), and the PM-based MOD16 ET. SEBS was found to overestimate (PBIAS = 28 %) and MOD16 was found to underestimate ET (PBIAS =-26 %). The performance of STIC1.2 was better in forest and grassland ecosystems as compared to cropland (20 % underestimation) and woody savanna (40 % overestimation). Model inter-comparison suggested that ET differences between the models are robustly correlated with g A and associated roughness length estimation uncertainties which are intrinsically connected to T R uncertainties, vapor pressure deficit (D A ), and vegetation cover. A consistent performance of STIC1.2 in a broad range of hydrological and biome categories, as well as the capacity to capture spatio-temporal ET signatures across an aridity gradient, points to the potential for this simplified analytical model for near-real-time ET mapping from regional to continental scales.

Bhattarai, Nishan (ORCID:0000000327493549)↗

The updated ITPA global H-mode confinement database: description and analysis

The multi-machine ITPA Global H-mode Confinement Database has been upgraded with new data from JET with the ITER-like wall and ASDEX Upgrade with the full tungsten wall. This paper describes the new database and presents results of regression analysis to estimate the global energy confinement scaling in H-mode plasmas using a standard power law. Various subsets of the database are considered, focusing on type of wall and divertor materials, confinement regime (all H-modes, ELMy H or ELM-free) and ITER-like constraints. Apart from ordinary least squares, two other, robust regression techniques are applied, which take into account uncertainty on all variables. Regression on data from individual devices shows that, generally, the confinement dependence on density and the power degradation are weakest in the fully metallic devices. Using the multi-machine scalings, predictions are made of the confinement time in a standard ELMy H-mode scenario in ITER. The uncertainty on the scaling parameters is discussed with a view to practically useful error bars on the parameters and predictions. One of the derived scalings for ELMy H-modes on an ITER-like subset is studied in particular and compared to the IPB98(y,2) confinement scaling in engineering and dimensionless form. Transformation of this new scaling from engineering variables to dimensionless quantities is shown to result in large error bars on the dimensionless scaling. Regression analysis in the space of dimensionless variables is therefore proposed as an alternative, yielding acceptable estimates for the dimensionless scaling. The new scaling, which is dimensionally correct within the uncertainties, suggests that some dependencies of confinement in the multi- machine database can be reconciled with parameter scans in individual devices. This includes vanishingly small dependence of confinement on line-averaged density and normalized plasma pressure (β), as well as a noticeable, positive dependence on effective atomic mass and plasma triangularity. Extrapolation of this scaling to ITER yields a somewhat lower confinement time compared to the IPB98(y, 2) prediction, possibly related to the considerably weaker dependence on major radius in the new scaling (slightly above linear). Further studies are needed to compare more flexible regression models with the power law used here. In addition, data from more devices concerning possible ‘hidden variables’ could help to determine their influence on confinement, while adding data in sparsely populated areas of the parameter space may contribute to further disentangling some of the global confinement dependencies in tokamak plasmas.

Database↗

Machine learning to discover mineral trapping signatures due to CO 2 injection

Mineral trapping is pursued as a geological CO 2 sequestration (GCS) mechanism because it permanently stores CO 2 in solid phases or minerals. However, CO 2 mineral-trapping mechanisms are poorly understood due to (1) lack of sufficient field and laboratory data characterizing these complex processes, and (2) challenges to develop site-specific reactive-transport models coupling fluid flow and geochemical reactions occurring at various temporal (from milliseconds to years) and spatial (from pore (millimeters) to field (kilometers)) scales. Reactive transport with additional complexities such as heterogeneity can make the simulation outputs even more difficult to interpret because of complex nonlinearity and multi-scale interdependencies. Furthermore, the values of model outputs such as concentrations can vary by several orders of magnitude, making it harder to correlate and characterize the impact of the variables via traditional data interpretation techniques such as exploratory data analyses. Recently, machine learning (ML) has shown promise in feature discovery and in highlighting hidden mechanisms that cannot be obtained by existing data-analytics and statistical methods. In this study, we applied an unsupervised ML approach, non-negative matrix factorization with custom -means clustering (NMF) to the data generated by reactive-transport simulations of GCS. The reactive-transport data consisted of 19 attributes, including four physio-chemical variables (pH, porosity, aqueous CO 2 , and sequestered CO 2 ), six chemical species (K + , Na + , HCO, Ca 2+ , Mg 2+ , Fe 2+ ), and four carbonate minerals (calcite, dolomite, siderite, and ankerite), a feldspar mineral (albite), and four clay minerals (illite, clinochlore, kaolinite, and smectite) over a period of 200 years of simulation time. Furthermore, the simulation data used was for Morrow B sandstone at the Farnsworth hydrocarbon unit in Texas. Data are sampled at two locations within the model domain: (1) at the injection well and (2) 200 m west of the injection well. The injection was performed for a period of 10 years. Using NMF, we estimated the temporal interdependencies among the 19 attributes over a span of 200 years. We found that NMF was able to identify four reaction stages and their dominant attributes; these cannot be directly discerned through traditional visualization (e.g., line plots, Pareto analysis, Glyph-based visualization methods) or exploratory data analysis tools of the simulation data. The four stages were: reactions in the injection phase followed by short-, mid-, and long-term reactions. The NMF analysis also revealed that 10 among the 19 attributes are dominant. These dominant attributes for mineral trapping include calcite, dolomite at injection well, siderite at 200 m away from the injection well, clinochlore, kaolinite, Na + , K + , Ca 2+ , Mg 2+ , pH, and aqeuous CO 2 . Finally, at late times (65–200 years), our results showed that calcite plays a major role in mineral trapping with insignificant contribution from siderite, ankerite, and clay minerals. These findings make the proposed unsupervised ML-model attractive for reactive-transport sensing towards real-time GCS monitoring.

54 ENVIRONMENTAL SCIENCES↗

KIC 4552982: OUTBURSTS AND ASTEROSEISMOLOGY FROM THE LONGEST PSEUDO-CONTINUOUS LIGHT CURVE OF A ZZ Ceti

We present the Kepler light curve of KIC 4552982, the first ZZ Ceti (hydrogen-atmosphere pulsating white dwarf star) discovered in the Kepler field of view. Our data span more than 1.5 years, with a 86% duty cycle, making it the longest pseudo-continuous light curve ever recorded for a ZZ Ceti. This extensive data set provides the most complete coverage to date of amplitude and frequency variations in a cool ZZ Ceti. We detect 20 independent frequencies of variability in the data that we compare with asteroseismic models to demonstrate that this star has a mass M{sub ∗}>0.6 M{sub ⊙}. We identify a rotationally split pulsation mode and derive a probable rotation period for this star of 17.47 ± 0.04 hr. In addition to pulsation signatures, the Kepler light curve exhibits sporadic, energetic outbursts that increase the star’s relative flux by 2%–17%, last 4–25 hr, and recur on an average timescale of 2.7 days. These are the first detections of a new dynamic white dwarf phenomenon that may be related to the pulsations of this relatively cool (T{sub eff} = 10,860±120 K) ZZ Ceti star near the red edge of the instability strip.

79 ASTRONOMY AND ASTROPHYSICS↗

Benchmark Tracking System for Performance Monitoring

Benchmarking is essential for high-performance software development, particularly for monitoring performance across code iterations. This project focused on enhancing the benchmarking process for Lamellar, an asynchronous runtime for High-Performance Computing (HPC) systems developed at Pacific Northwest National Laboratory. Prior to this work, benchmark results were difficult to track and compare across code versions, presenting significant challenges in identifying performance regressions and long-term trends. The primary objective was to establish a systematic, reproducible approach for measuring performance and detecting regressions following code commits. Our methodology involved three key components: standardizing benchmark outputs, implementing data versioning, and developing analysis tools. We standardized the benchmark output format to JSON Line records containing specific fields (execution time, hardware specifications, and environmental variables). To address data management challenges, we evaluated several options and eventually chose a git repository dedicated to benchmark data. We developed a suite of Python tools that processed benchmark results, enriched them with metadata, and facilitated search in the repository. The resulting system enables more efficient filtering and comparison of performance metrics across commit histories, hardware configurations, and benchmark variants through a unified query interface. Our implementation reduces computational overhead by first checking for existing results through configuration matching before initiating new benchmark runs, thereby conserving resources. The system has been validated by Lamellar developers. It organizes results by benchmark type and build configurations for efficient retrieval. Future developments include a planned Large Language Model interface for predicting benchmark performance, incorporating the criterion package for statistical analysis, which will enable automated detection of statistically significant performance changes, and integration with continuous integration pipelines. Despite these enhancements being reserved for future work, this project has successfully provided the Lamellar development team with a framework for maintaining consistent performance standards and identifying optimization opportunities across workloads and hardware environments.

97 MATHEMATICS AND COMPUTING↗

Simultaneous hierarchical segmentation and vectorization of satellite images through combined data sampling and anisotropic triangulation

The automatic detection, recognition , and segmentation of object classes in remote sensed images is of crucial importance for scene interpretation and understanding. However, it is a difficult task because of the high variability of satellite data. Indeed, the observed scenes usually exhibit a high degree of complexity, where complexity refers to the large variety of pictorial representations of objects with the same semantic meaning and also to the extensive amount of available det.ails. Therefore, there is still a strong demand for robust techniques for automatic information extraction and interpretation of satellite images. In parallel, there is a growing interest in techniques that can extract vector features directly from such imagery. In this paper, we investigate the problem of automatic hierarchical segmentation and vectorization of multispectral satellite images. We propose a new algorithm composed of the following steps: (i) a non-uniform sampling scheme extracting most salient pixels in the image, (ii) an anisotropic triangulation constrained by the sampled pixels taking into account both strength and directionality of local structures present in the image, (iii) a polygonal grouping scheme merging, through techniques based on perceptual information , the obtained segments to a smaller quantity of superior vectorial objects. Besides its computational efficiency, this approach provides a meaningful polygonal representation for subsequent image analysis and/or interpretation.

47 OTHER INSTRUMENTATION↗

RACORO aerosol data processing

The RACORO aerosol data (cloud condensation nuclei (CCN), condensation nuclei (CN) and aerosol size distributions) need further processing to be useful for model evaluation (e.g., GCM droplet nucleation parameterizations) and other investigations. These tasks include: (1) Identification and flagging of 'splash' contaminated Twin Otter aerosol data. (2) Calculation of actual supersaturation (SS) values in the two CCN columns flown on the Twin Otter. (3) Interpolation of CCN spectra from SGP and Twin Otter to 0.2% SS. (4) Process data for spatial variability studies. (5) Provide calculated light scattering from measured aerosol size distributions. Below we first briefly describe the measurements and then describe the results of several data processing tasks that which have been completed, paving the way for the scientific analyses for which the campaign was designed. The end result of this research will be several aerosol data sets which can be used to achieve some of the goals of the RACORO mission including the enhanced understanding of cloud-aerosol interactions and improved cloud simulations in climate models.

54 ENVIRONMENTAL SCIENCES↗