Search NASA⌕ Search

SEARCH · Search NASA

Results for “Defect kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A quantitative phase-field model for gas bubble evolution in UO2

Due to the large formation energy of vacancies and noble gas atoms in the form of interstitials or substitutional atoms in nuclear fuel (UO2), the thermodynamic equilibrium concentrations of these species are very low in the nuclear fuel matrix even at very high temperatures, which imposes difficulties upon the quantitative study of bubble evolution via the phase-field method. In this study, a quantitative phase-field model is proposed to deal with this problem. The system’s free energy density is derived according to the principles of thermodynamics, with consideration of the elastic effect and with the use of real material parameters from experiments. The model is useful for the study of the kinetics of gas bubble growth with very dilute concentrations of vacancy and gas atoms in the matrix. This model is applied to study single bubble growth and multiple bubble growth under various concentrations of vacancy and gas atoms and at various temperatures. The elastic effect and the effects of the generation rate of vacancies and gas atoms on bubble growth are analyzed.

low defect concentration, nuclear fuel, gas bubble↗
DOE OSTI2024

Materials genome innovation for computational software (magics) center

Functional layered material (LM) architectures will dominate nanomaterials science in this century. We have developed theory, modeling, simulation, and software and data tools that enhance understanding and AI guide synthesis, enable characterization of complex structures, and improve capabilities in the predictive design and growth of LMs. Research at the Center has focused on: Computational synthesis and characterization: AI guided synthesis and experimental synthesis of stacked LMs with tailored properties via optimized chemical vapor deposition (CVD) growth and liquid-phase exfoliation; study defects, edges, grain boundaries, wrinkling of atomic layers and their effects on chemical, mechanical, electrical, and optical properties. Far-from-equilibrium processes: Joint experimental and simulation based probe of electronic processes with NAQMD and ultrafast X-ray free-electron laser (XFEL) and ultrafast electron diffraction (UED) facilities at Stanford. Experimentally validate NAQMD by ultrafast electron diffraction and X-ray spectroscopy studies of structural and excited state dynamics, shape fluctuations, and phonon dynamics. Scalable software: Simulation engines for desktop-to-exascale platforms using low-overhead, linear-scaling QMD algorithms; divide-conquer-recombine NAQMD with electronic excitations; extended-Lagrangian reactive molecular dynamics (RMD), machine learning (ML) based neural-network quantum molecular dynamics (NNQMD), and super-state accelerated molecular dynamics (AMD) and kinetic Monte Carlo codes; thermal and electrical transport software; and design 3D architectures of LMs with desired functionality using scalable software. Distribution of software and data, and training: Software and simulation-experimental data generated within the Center are distributed to the materials science community via Berkeley Materials Project (MP) framework. We have also organized three workshops for software distribution and training at USC (Nov. 2017, Mar. 2018) and Gaithersburg, MD (Nov. 2018) to train researchers, with the last one in focused on underrepresented groups, in collaboration with Howard University which is one of the largest HBCUs. The Center supported a total of 46 personnel and 6 undergraduate students. These include 14 faculty, 11 postdoctoral research associates, 20 graduate research assistants, and mentored 6 undergraduate students. This resulted in the publications of 63 research papers that include 46 publications on Reactive and Quantum Dynamics Simulations, 13 publications on Machine Learning for Quantum Materials, and 4 publications on Quantum Computing.

2D Materials↗
DOE OSTI2021

Selective Methane Oxidation to Methanol on ZnO/Cu 2 O/Cu(111) Catalysts: Multiple Site-Dependent Behaviors

Due to the abundance of natural gas in our planet, a major goal is to achieve a direct methane to methanol conversion at medium to low temperatures using mixtures of methane and oxygen. Here, we report an efficient catalyst, ZnO/Cu 2 O/Cu(111), for this process investigated using a combination of reactor testing, scanning tunneling microscopy, ambient-pressure x-ray photoemission spectroscopy, density functional calculations, and kinetic Monte Carlo simulations. The catalyst is capable of methane activation at room temperature and transforms mixtures of methane and oxygen to methanol at 450 K with a selectivity of ~30%. This performance is not seen for other heterogenous catalysts which usually require the addition of water to enable a significant conversion of methane to methanol. The unique coarse structure of the ZnO islands supported on a Cu 2 O/Cu(111) substrate provides a collection of multiple centers that display different catalytic activity during the reaction. ZnO-Cu 2 O step sites are active centers for methanol synthesis when exposed to CH 4 and O 2 due to an effective O-O bond dissociation, which enables a methane-to-methanol conversion with a reasonable selectivity. Upon addition of water, the defected O-rich ZnO sites, introduced by Zn vacancies, show superior behavior towards methane conversion and enhance the overall methanol selectivity to over 80%. Thus, in this case, the surface sites involved in a direct CH 4 → to CH 3 OH conversion are different from those engaged in methanol formation without water. Furthermore, the identification of the site-dependent behavior of ZnO/Cu 2 O/Cu(111) opens a design strategy for guiding efficient methane reforming with high methanol selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local Background Hole Density Drives Nonradiative Recombination in Tin Halide Perovskites

In this study, we use multimodal microscopy to study carrier recombination in semiconducting tin halide perovskite films based on PEA 0.2 FA 0.8 SnI 3 (PEA = phenethylammonium; FA = formamidinium). We use the observation of pseudo-first-order photoluminescence (PL) decay kinetics to establish a method for quantifying the hole dopant level and nonradiative recombination rate constant. We find that untreated PEA 0.2 FA 0.8 SnI 3 films exhibit large hole doping concentrations of p 0 ≈ 10 19 cm –3 , which is reduced to p 0 ≈ 10 16 cm –3 after SnF 2 treatment. While it is well-known that the radiative recombination rates are increased with p 0 , we reveal that the nonradiative rate is also increased. We find that p-type regions in untreated PEA 0.2 FA 0.8 SnI 3 films are centers for nonradiative recombination, which are diminished in films with p 0 ≈ 10 16 cm –3 . We discover significant PL heterogeneity even in PEA 0.2 FA 0.8 SnI 3 films with moderate dopant levels, suggesting that new strategies to eliminate deleterious defects in PEA 0.2 FA 0.8 SnI 3 must be developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Development of an MKID frequency-to-pixel LED mapper for SPT-3G+

SPT-3G+ is the next-generation camera for the South Pole Telescope (SPT). SPT is designed to measure the cosmic microwave background (CMB) and the mm/sub-mm sky. The planned focal plane consists of 34,000 microwave kinetic inductance detectors (MKIDs), divided among three observing bands centered at 220, 285, and 345 GHz. Each readout line is designed to measure 800 MKIDs over a 500 MHz bandwidth, which places stringent constraints on the accuracy of the frequency placement required to limit resonator collisions that reduce the overall detector yield. To meet this constraint, we are developing a two-step process that first optically maps the resonance to a physical pixel location, and then next trims the interdigitated capacitor (IDC) to adjust the resonator frequency. We present a cryogenic LED apparatus operable at 300 mK for the optical illumination of SPT-3G+ detector arrays. We demonstrate integration of the LED controls with the GHz readout electronics (RF-ICE) to take data on an array of prototype SPT-3G+ detectors. We show that this technique is useful for characterizing defects in the resonator frequency across the detector array and will allow for improvements in the detector yield.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Improving Photostability of Cesium-Doped Formamidinium Lead Triiodide Perovskite

Using time-resolved in situ X-ray photoelectron spectroscopy, we identify and suppress rapid degradation mechanisms for cesium-stabilized formamidinium lead iodide perovskite materials used in state-of-the-art photovoltaics. Accelerated degradation under high light intensity and heating reveals a photocatalytic reaction pathway responsible for rapid decomposition in iodide-rich compositions and a slower pathway for more stoichiometric samples. Using Avrami–Erofe’ev kinetic analysis, we find that the fast process is consistent with a 2D crystallization and growth mechanism fueled by excess halide salt at grain boundaries and surfaces. Moreover, the rate of decomposition varies dramatically with the wavelength of light used to illuminate the thin films. Furthermore, our results reveal the photodegradation mechanisms of PbI 2 and excess iodide and provide a path to increasing perovskite stability under photoexcitation.

14 SOLAR ENERGY↗
DOE OSTI2025

Rational Selection of Transition-Metal Oxide Electrocatalysts from Structure Electronic Structure-Activity Relations: The Role of Defects, Strain, and Sub-Surface Layering

This BES research investigates the physicochemical properties of metal oxides and how they affect electrocatalytic functionalities. The goal is to develop a predictive framework for realizing top-performing electrocatalytic materials for energy-critical reactions. The hypothesis is that well-defined thin films allow detailed mapping of structural-activity relationships because flat surfaces are more straightforward to characterize. Furthermore, the well-defined nature of thin-film metal oxides allows precise tuning of structural and chemical variables for structure-activity-relationship mapping. The proposed research has two technical objectives. The first is to experimentally assess whether the binding energies of surface oxygen can serve as an activity descriptor for oxygen electrocatalysis on metal oxides and then how to control them by tuning the structure and chemical variables. The second is to find the rate-limiting process in oxygen electrocatalysis and other small-molecule reactions. Similar mechanistic insights have been developed on well-defined platinum surfaces but not yet on oxides. This research addresses this gap and uses electrochemistry and X-ray photoemission spectroscopy to study oxide surface chemistry. The obtained insights are collectively analyzed to reveal how the oxides’ structural and chemical variables affect kinetics and can be used to design more active electrocatalysts for energy-critical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O 2−δ Nanoparticles

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood. Here, in this work, Pr 0.2 Ce 0.8 O 2−δ (PCO20) nanopowders were prepared by coprecipitation, then sintered in a modified dilatometer at three different temperatures (600, 725, and 850 °C) for microstructure evolution, resulting in three samples with different average particle sizes (23, 30, and 53 nm). The chemical strain and electronic/ionic conductivity were then measured simultaneously on stable nanostructures in four isotherms from 550 to 400 °C with steps in pO 2 (1 to 10 –4 atm O 2 ). A microcrystalline bar was prepared and measured for comparison. Particle size reduction led to a monotonically decreasing isothermal redox chemical strain, confirmed by in situ high-temperature, controlled-atmosphere XRD measurements. The corresponding conductivity measurements provided defect chemical insight into the particle size-dependent chemical expansion behavior. The significant weakening of the pO 2 dependence and decreased activation energy for electrical conduction with decreasing particle size indicated a decrease in the reduction enthalpy of PCO, shifting the transition from (Pr) polaronic to ionic behavior to higher pO 2 . STEM-EELS measurements confirmed the majority of Pr was reduced to 3+ in the nanoparticles, while Ce remained 4+. These results demonstrate suppression of deleterious chemical expansion and tailoring of the dominant charge carrier simply through controlling the particle size, providing insights for MIEC microstructural design.

ceria↗
DOE OSTI2026

Role of Chemical Disorder in High Temperature Dislocation Glide in Refractory Multi-principal Element Alloys

Refractory multi-principal element alloys (RMPEAs) combine a chemically disordered lattice with a structurally ordered, single‐phase body‐centered cubic (bcc) crystal structure. Chemical fluctuations in these alloys give rise to significant energy barriers that impede dislocation motion. In this study, we use phase field dislocation dynamics to examine how spatial temperature fluctuations compete with randomness in energy barriers to affect the motion of long screw dislocations in three equi-atomic MoNbTa‐based RMPEAs: MoNbTa, MoNbTaW, and MoNbTaVW. Over a wide range of homologous temperatures (T h ≈ 0–0.6), we determined a screw dislocation ‘flow stress’ as the minimum applied stress to sustain continuous motion over a long excursion distance within a fixed timeframe. All three RMPEAs exhibit temperature dependent flow stress with three characteristic glide regimes: at low homologous temperatures, flow stress drops sharply, and screw glide remains planar and rectilinear; at intermediate homologous temperatures, the flow stress levels off as glide becomes planar but wavy; and at high homologous temperatures, flow stress plateaus as screws exhibit nonplanar, three‐dimensional motion. Glide kinetics and transition temperatures are controlled by the chemically induced fluctuations in the energy landscape. The rectilinear to wavy transition temperature is controlled by statistically weakest local barriers in the glide plane, whereas the wavy to 3D transition temperature is governed by statistically strongest local barriers. At low and intermediate homologous temperatures, the relative spread in energy barriers governs glide behavior by controlling the local kinetics of kink pair formation and kink pinning. At high homologous temperatures, the average barrier height governs the glide behavior by controlling the number of out-of-plane excursions during 3D glide. These findings reveal how random chemical fluctuations determine screw‐driven plasticity in RMPEAs, providing critical insight for the design of high temperature structural alloys.

Defects↗
DOE OSTI2025

Self-Sensing Composites via an Embedded 3D-Printed PVDF-MoS 2 Nanosensor for Structural Health Monitoring

Carbon fiber (CF)-reinforced epoxy composites are widely used in vehicle applications, where early damage detection is crucial for reliability and safety. To address this need, we developed a self-sensing epoxy/CF composite by embedding a PVDF-MoS 2 nanosensor via an embedded 3D printing method. By harnessing the intrinsic curing kinetics of epoxy, we tailored its rheological properties to optimize the embedded printing process, enabling precise and reliable support for sensor filaments without compromising the composite’s structural and functional integrity. Through comprehensive rheological and kinetic analysis, we established a quantitative relationship among curing temperature, conversion rate, and resulting yield modulus─defining a narrow processing window essential for successful sensor integration. Specifically, we identified that an epoxy yield modulus range of 180–294 Pa and a conversion rate below 10% are critical to support the PVDF-MoS 2 filament architecture. Here, this embedded 3D printing method produces complex and multimaterial PVDF-MoS 2 sensors within an epoxy matrix with minimal deformation and reduced postprocessing, which is scalable and adaptable for industrial applications. Under cyclic loading, the embedded sensors exhibited stable signals under constant loads and increased voltage signals in response to crack formation (17–35% higher) and catastrophic failure (1 order of magnitude higher), effectively capturing structural changes in real time. This study demonstrates the potential of PVDF-MoS 2 nanocomposite sensor materials for real-time structural health monitoring in epoxy–CF composite systems, enabling early detection of defects and stress anomalies, significantly reducing the risk of unexpected failures, and enhancing structural reliability.

PVDF-MoS2 sensor↗
DOE OSTI2024

Effective Corrosion-Resistant Single-Atom Alloy Catalyst on HfO 2 -Passivated BiVO 4 Photoanode for Durable (≈800 h) Solar Water Oxidation

Green hydrogen (H 2 ) production from solar water splitting necessitates photoelectrodes with superior photoelectrochemical (PEC) activity and durability. However, surface defects and photocorrosion instability—especially at high potentials—limit PEC performance and stability. Herein, the prototypical bismuth vanadate (BiVO 4 ) photoanode is used to demonstrate a holistic approach to improve photocurrent density and long-term stability. In this approach, high surface-area nanostructuring of BiVO 4 is combined with barium (Ba) doping with semi-crystalline hafnium oxide (HfO 2 ) surface passivation and single-atom nickel platinum (NiPt) catalysts. The introduction of Ba 2+ ions into BiVO 4 increases the concentration of conductive V 4+ ions or the ratio of V 4+ ions to oxygen vacancies, avoiding V 5+ dissolution during water oxidation. The semi-crystalline HfO 2 , which serves as a passivation layer, prevents BiVO 4 photocorrosion by suppressing harmful chemical reactions when holes are transferred to the electrolyte. The synergistic use of isolated single-atom and Ni-Pt coordination improves charge transfer at the photoanode/electrolyte interface, leading to enhanced PEC kinetics and stability. As a result, a photoelectrode is demonstrated with ≈6.5 mA cm -2 at 1.23 V versus a reversible hydrogen electrode (RHE) and continuous operation for 800 h with a negligible degradation rate. This work provides a promising approach to improve photoanodes for PEC H 2 production.

08 HYDROGEN↗
DOE OSTI2022

First-principles simulation of light-ion microscopy of graphene

The extreme sensitivity of 2D materials to defects and nanostructure requires precise imaging techniques to verify presence of desirable and absence of undesirable features in the atomic geometry. Helium-ion beams have emerged as a promising materials imaging tool, achieving up to 20 times higher resolution and 10 times larger depth-of-field than conventional or environmental scanning electron microscopes. Here, we offer first-principles theoretical insights to advance ion-beam imaging of atomically thin materials by performing real-time time-dependent density functional theory simulations of single impacts of 10–200 keV light ions in free-standing graphene. Here we predict that detecting electrons emitted from the back of the material (the side from which the ion exits) would result in up to three times higher signal and up to five times higher contrast images, making 2D materials especially compelling targets for ion-beam microscopy. This predicted superiority of exit-side emission likely arises from anisotropic kinetic emission. The charge induced in the graphene equilibrates on a sub-fs time scale, leading to only slight disturbances in the carbon lattice that are unlikely to damage the atomic structure for any of the beam parameters investigated here.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of p-GaN layer thickness in the degradation of InGaN-GaN MQW solar cells under 405 nm laser excitation

GaN-based solar cells with InGaN multiple quantum wells (MQWs) are promising devices for application in space environment, concentrator solar systems, wireless power transmission and multi-junction solar cells. It is therefore important to understand their degradation kinetics when submitted to high-temperature and high-intensity stress. We submitted three samples of GaN-InGaN MQW solar cells with p-AlGaN electron-blocking-layer with different thickness of the p-GaN layer to constant power stress at 310 W/cm 2 , 175 °C for several hundred hours. The main degradation modes are a reduction of open-circuit voltage, short-circuit current, external quantum efficiency, power conversion efficiency and electroluminescence. In particular, we observed that a thinner p-GaN layer results in a stronger degradation observed on the cell operating parameters. The analysis of the dark I-V characteristics showed an increase in low-forward bias current and the analysis of electroluminescence showed a decrease in the electroluminescene emitted by the (forward biased) cell, as a consequence of stress. This work highlights that the cause of degradation is possibly related to a diffusion mechanism, which results in an increase of defect density in the active region. Finally, the impurities involved in the diffusion processes possibly originate from the p-side of the devices, therefore a thicker p-GaN layer reduces the amount of defects reaching the active region.

14 SOLAR ENERGY↗
DOE OSTI2020

Kinetic Simulations of Microstructural Evolution (KSOME)

"Kinetic simulations of microstructural evolution" (KSOME) is an object Kinetic Monte Carlo (OMKC) simulation code. It is developed to simulate microstructural evolution in materials during irradiation. KSOME is developed from ground up with priority given to the flexibility, ease of upgradability, and computation efficiency, in that order. With previously developed simulation codes, various processes (more precisely, the diffusion-reaction processes) that can occur in a system were hardwired into the code. Hence, to perform higher fidelity simulations, a significant coding effort was required every time to incorporate either a more accurate description of existing processes or new processes. With KSOME, the necessity for frequent code upgrades whenever there is a need to perform higher fidelity simulations is either eliminated or reduced significantly. In KSOME, the categories of various diffusion-reaction processes and the data-management system are hardwired, while the execution of the diffusion-reaction processes specific to a system is specified via input files. In the present version of KSOME, the analytical expression required to calculate defect interaction radii are inputted via a text file. However, the ability to parse mathematical expressions from a text file can be extended to input the analytical expression to calculate other defect properties; including the expressions to calculate the change in the migration barriers of mobile defects due to long-range interaction with extended defects

Nandipati, Giridhar [Pacific Northwest National La↗
DOE OSTI2025

Ion Size Effects on the Thermodynamic, Kinetic, and Mechanical Properties during Ion Exchange in Solid-State Electrolytes

Ion exchange offers a pathway to impose residual compressive stresses to mitigate the electro-chemo-mechanical cracking of solid-state electrolytes such as lithium lanthanum zirconium oxide. This study uses a coupled multiscale framework (integrating density functional theory (DFT), molecular dynamics (MD), and continuum modeling) to examine how exchange ion size influences stress, diffusion, fracture toughness, and electronic properties. Larger isovalent ions (Na + , Ag + , K + ) were exchanged with Li + , with DFT confirming their preference for octahedral 96h sites and a linear relationship between ion size and chemical free expansion coefficient. MD simulations reveal stress and concentration effects on exchange ion diffusivity at elevated temperatures, with Na + and Ag + maintaining favorable mobility while K + showing concentration-dependent clustering. Continuum modeling predicts the range of fracture strength improvements and the required ion exchange concentration profile. It was shown that a 5% surface exchange concentration can induce ∼0.6 GPa of surface compressive stress using Na + and ∼1.0 GPa of surface compressive stress using Ag + . On the other hand, larger ion exchange species may penalize Li + diffusivity by increasing the activation volume and activation energy. Interestingly, Na + has a negligible penalty on Li-ion diffusivity. The room temperature Li + ion diffusivity is reduced by ∼40% with Ag + ion exchange. Electronic band structure analysis shows no size-dependent change in the bandgap, though Ag + introduces localized defect states near the valence band maximum. This study highlights ion size as a key factor in optimizing LLZO properties, offering a framework to improve the solid-state battery performance.

Jagad, Harsh D. [Brown Univ., Providence, RI (Unit↗
DOE OSTI2022

Absolute mass calibration of fission product distributions measured with the E-$v$ method

The mass calibration of fission product distributions measured with the energy–velocity (E-v) method constitutes a technical challenge. The energy loss of the fission fragments in the various dead layers of the spectrometer and other sources of pulse-height defects of the energy detectors are a significant source of systematic uncertainty in the mass calculations used to determine the measured fission product yields. Here, in this study, the absolute calibration of the fission mass distributions is accomplished by measuring prompt γ-rays in coincidence with the fission fragments. This allows for the direct calibration of the mass spectra and eliminates any dependence on potentially complicated energy corrections. The first test measurement was performed at the Los Alamos Neutron Science Center employing the SPectrometer for Ion DEtermination in fission Research (SPIDER). SPIDER is a 2E-2v spectrometer designed for measuring independent fission product yields from neutron-induced fission. In this test, the single-arm SPIDER (E-v) system and an array of 252 Cf sources were used. The single-arm system consisted of two time pick-off detectors for measuring the time-of-flight of the fission fragments and a double-sided silicon strip detector (DSSD) for measuring the kinetic energy. Characteristic γ-rays from fission fragments were detected using three high-purity germanium (HPGe) detectors. For the mass calibration, γ–mass coincidence events from twelve product isotopes were used. The measured FPYs from 252 Cf spontaneous fission were found to be in excellent agreement with the evaluated data after applying the absolute mass calibration. From the γ–mass coincidence events, the mass resolution of the system was also extracted. An average mass resolution of ~1.4 AMU (FWHM) for the light fragments and ~2.4 AMU (FWHM) for the heavy fragments were found. This was the first in-situ calibration and characterization of the SPIDER spectrometer, which paves the way for high-quality FPY measurements with this instrument.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Effects of Residual DMSO Adduct on Photonically Cured MAPbI 3 Solar Cells

Defects and impurities in halide perovskite solar cells can negatively impact device performance and long-term stability. In this study, we identify photonically cured methylammonium (MA) lead iodide films contain a residual adduct, MA 2 Pb 3 I 8 (dimethyl sulfoxide) 2 (MA 2 Pb 3 I 8 (DMSO) 2 ), that reduces photocurrent generation in perovskite solar cells (PSCs). This is evidenced by a decrease in the external quantum efficiency (EQE) near 400 nm. Similar EQE reductions were observed in PSCs produced using high-speed processes but have not been thoroughly examined. Through X-ray diffraction patterns and Fourier transform infrared spectroscopy, we establish the photo-inactive MA 2 Pb 3 I 8 (DMSO) 2 as the culprit for the EQE reduction. Combined experimental and simulation results reveal that the MA 2 Pb 3 I 8 (DMSO) 2 phase is located at the hole transport layer/ interface, not on the surface, resulting in lower quantum efficiency and surface photovoltage in the short wavelength region. The residual adduct is kinetically trapped due to the short processing time (20 ms) and crystallization direction but can be removed by an additional photonic pulse. Furthermore, this study highlights the need for careful examination of resulting materials beyond device efficiency when transitioning from laboratory processing to industrial high-speed methods.

14 SOLAR ENERGY↗
DOE OSTI2021

Microstructural evolution in Cu-Nb processed via friction consolidation

Immiscible alloys, whether in well-mixed or layered forms, are of increasing interest based on their novel structural and functional properties, such as enhanced thermal stability against grain growth or radiation-induced defect trapping at the interfaces. To address the need for new approaches to tailor microstructures, the microstructural development of an immiscible Cu-Nb alloy processed via friction consolidation of elemental powders is investigated. Friction consolidation is a solid-phase processing technique that imparts severe plastic strain into a deforming volume resulting in elevated temperatures below the melting temperature of the alloy. Two distinct processing pathways were chosen to understand the effect of thermomechanical conditions on the final microstructure. The microstructure was characterized using scanning electron microscopy, scanning transmission electron microscopy, and X-ray diffraction techniques. Path 1 exhibited larger strain, strain rate, and temperature as compared with path 2. In path 1, agglomerated Nb particles were present in the recrystallized ultrafine-grained Cu matrix, while in path 2 extremely fine and dispersed Nb particles were present in a highly deformed Cu matrix. In both pathways, supersaturation of Cu in Nb lattices was noted, but not vice-versa. The asymmetry in mixing is explained based on deformation-based, thermodynamic and kinetic factors. These findings provide a pathway for creation of novel tailored microstructures and improved properties in any number of binary immiscible alloy systems.

Cu-Nb alloys, Microstructural refinement, Friction↗