Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Dislocation-induced stop-and-go kinetics of interfacial transformations

Most engineering materials are based on multiphase microstructures produced either through the control of phase equilibria or by the fabrication of different materials as in thin-film processing. In both processes, the microstructure relaxes towards equilibrium by mismatch dislocations (or geometric misfit dislocations) across the heterophase interfaces (1-5) . Despite their ubiquitous presence, directly probing the dynamic action of mismatch dislocations has been unachievable owing to their buried nature. In this work, using the interfacial transformation of copper oxide to copper as an example, we demonstrate the role of mismatch dislocations in modulating oxide-to-metal interfacial transformations in an intermittent manner, by which the lateral flow of interfacial ledges is pinned at the core of mismatch dislocations until the dislocation climbs to the new oxide/metal interface location. Together with atomistic calculations, we identify that the pinning effect is associated with the non-local transport of metal atoms to fill vacancies at the dislocation core. These results provide mechanistic insight into solid-solid interfacial transformations and have substantial implications for utilizing structural defects at buried interfaces to modulate mass transport and transformation kinetics.

25 ENERGY STORAGE↗

Clarifying the definition of ‘transonic’ screw dislocations

We report a number of recent Molecular Dynamics (MD) simulations have demonstrated that screw dislocations in face centred cubic (fcc) metals can achieve stable steady state motion above the lowest shear wave speed (v shear ) which is parallel to their direction of motion (often referred to as transonic motion). This is in direct contrast to classical continuum analyses which predict a divergence in the elastic energy of the host material at a crystal geometry dependent ‘critical’ velocity v crit . Within this work, we first demonstrate through analytic analyses that the elastic energy of the host material diverges at a dislocation velocity (v crit ) which is greater than v shear , i.e. v crit >v shear . We argue that it is this latter derived velocity (v crit ) which separates ‘subsonic’ and ‘supersonic’ regimes of dislocation motion in the analytic solution. In addition to our analyses, we also present a comprehensive suite of MD simulation results of steady state screw dislocation motion for a range of stresses and several cubic metals at both cryogenic and room temperatures. At room temperature, both our independent MD simulations and the earlier works find stable screw dislocation motion only below our derived v crit . Nonetheless, in real-world polycrystalline materials v crit cannot be interpreted as a hard limit for subsonic dislocation motion. In fact, at very low temperatures our MD simulations of Cu at 10 Kelvin confirm a recent claim in the literature that true ‘supersonic’ screw dislocations with dislocation velocities v>v crit are possible at very low temperatures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evolution of dislocation loops and voids in post-irradiation annealed ThO 2 : A combined in-situ TEM and cluster dynamics investigation

The effect of isochronal annealing on the evolution of dislocation loop and void population in proton irradiated ThO 2 has been investigated. Post-irradiation annealing in other actinide oxides like UO 2 shows significant loop coarsening. ThO 2 samples were irradiated with 2 MeV protons up to a dose of 0.1 dpa at 600°C. Post-irradiation isochronal annealing was performed at 600, 800, 1000 and 1100°C for 1 h at each temperature using in-situ TEM. Only faulted 1/3<111> type dislocation loops were observed, and their sizes and distribution were characterized. Further, the population of self-interstitial atom (SIA) dislocation loops did not show any significant growth and coarsening. Additionally, nanometric voids were observed at annealing temperatures of 1000 and 1100°C. Using cluster dynamics (CD), we have studied the nucleation and growth of point defects and defect clusters, i.e., SIA prismatic dislocation loops and nanometric and sub-nanometric voids in proton irradiated ThO 2 . The CD model was further utilized to predict the growth and coarsening of loops and voids during isochronal annealing at the experimental and higher temperatures. The model did not predict significant SIA loop growth which closely corresponds to the TEM observations. CD predicted SIA loop coarsening is insignificant even at high annealing temperature of 1500°C because the model only considers the growth of defect clusters by absorption of like point defects, i.e., SIA loops absorb interstitials and voids absorb vacancies, and cannot account for their migration and coalescence due to elastic interaction. The CD model also predicts the evolution of nanometric voids having mean size within the error bounds of TEM observations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A tantalum strength model using a multiscale approach: version 2

A continuum strength model for tantalum was developed in 2007 using a multiscale approach. This was our first attempt at connecting simulation results from atomistic to continuum length scales, and much was learned that we were not able to incorporate into the model at that time. The tantalum model described in this report represents a second cut at pulling together multiscale simulation results into a continuum model. Insight gained in creating previous multiscale models for tantalum and vanadium was used to guide the model construction and functional relations for the present model. While the basic approach follows that of the vanadium model, there are significant departures. Some of the recommendations from the vanadium report were followed, but not all. Results from several new analysis techniques have not yet been incorporated due to technical difficulties. Molecular dynamics simulations of single dislocation motion at several temperatures suggested that the thermal activation barrier was temperature dependent. This dependency required additional temperature functions be included within the assumed Arrhenius relation. The combination of temperature dependent functions created a complex model with a non unique parameterization and extra model constants. The added complexity had no tangible benefits. The recommendation was to abandon the strict Arrhenius form and create a simpler curve fit to the molecular dynamics data for shear stress versus dislocation velocity. Functions relating dislocation velocity and applied shear stress were constructed vor vanadium for both edge and screw dislocations. However, an attempt to formulate a robust continuum constitutive model for vanadium using both dislocation populations was unsuccessful; the level of coupling achieved was inadequate to constrain the dislocation evolution properly. Since the behavior of BCC materials is typically assumed to be dominated by screw dislocations, the constitutive relations were ultimately built using only the screw relations. In light of this, the screw dislocation mobility relation is chosen as the starting point for the present tantalum model. Edge dislocations are not included explicitly in the current model. A significant change from the previous models is in the functional dependence of the dislocation evolution equations. The prior multiscale models assumed that the dislocation evolution rate depended on stress as well dislocation velocity. This crated an implicit dependence on the kinetic relation and required an iterative solution for the dislocation density. In the present model the integration scheme is simplified by casting the dislocation evolution terms of strain rate and current dislocation density. The final notable change was in the transition relation from the thermally activated regime to phonon drag. Historically, and in the prior models, this transition had been through a harmonic average on the strain rates making it impossible to determine the stress directly when given the plastic strain rate. After considering alternative transition relations, it was determined that an equally suitable fit to the molecular dynamics simulation data in the transition region could be constructed by averaging stresses rather than strain rates. The end result of these enhancements is a simpler (fewer parameters) and more straight forward model formulation where the material strength can be evaluated directly when given the plastic strain rate, temperature, pressure and the dislocation density at the beginning of the time step. This greatly improves the computational efficiency and robustness over the prior models where additional iteration loops were required.

36 MATERIALS SCIENCE↗

The influence of kinematics of deformation on polycrystalline halite dynamic recrystallization: Full-field simulation of simple shear versus pure shear

Rock salt, composed mainly of halite, flows viscoplastically over a wide range of geological conditions, strongly impacting the dynamic evolution of sedimentary basins and orogens. Understanding how dislocation creep, which involves dislocation glide, intracrystalline recovery and dynamic recrystallization, influences the microstructure and rheology of halite under various deformation kinematics and temperatures is crucial for enhancing knowledge of salt flow dynamics. Here, this study employs a full-field numerical simulation method to compare the viscoplastic deformation of polycrystalline halite under simple shear and pure shear conditions up to a natural strain of ε = 1.5 at temperatures ranging from 100 °C to 300 °C. The results are presented in terms of crystallographic preferred orientation (CPO), grain shape preferred orientation (SPO), subgrain boundary direction, grain size and strain rate distribution. The results indicate that the crystallographic anisotropy of individual halite crystals is transferred to the polycrystalline scale, resulting in strain localization, particularly in simple shear simulations. The kinematics of deformation affect the evolution and distribution of high strain-rate bands, determining the direction of intragranular substructures and the morphology of strain-induced grain boundaries, with minimal impact on grain size. The intensity of grain boundary migration increases with temperature, significantly influencing grain morphology and size, thereby obscuring strain localization, while having little effect on CPOs. At low strain (ε < 1.0), CPOs relative to both the maximum shortening direction and the grain SPO are similar regardless of the deformation kinematics. At high strain (ε > 1.0), simple shear CPOs exhibit three stronger {100} maxima with a monoclinic symmetry relative to the grain SPO compared to the six {100} maxima with an orthotropic symmetry relative to the grain SPO generated under pure shear. Therefore, microstructures and CPOs can serve as indicators of the strain path in polycrystalline halite under various conditions, aiding in determining the shear sense and elucidating the deformation kinematics of salt structures.

58 GEOSCIENCES↗

Nonperturbative Quantum Nature of the Dislocation–Phonon Interaction

Despite the long history of dislocation–phonon interaction studies, there are many problems that have not been fully resolved during this development. These include an incompatibility between a perturbative approach and the long-range nature of a dislocation, the relation between static and dynamic scattering, and their capability of dealing with thermal transport phenomena for bulk material only. Here in this paper, by utilizing a fully quantized dislocation field, which we called a “dislon”, a phonon interacting with a dislocation is renormalized as a quasi-phonon, with shifted quasi-phonon energy, and accompanied by a finite quasi-phonon lifetime, which are reducible to classical results. A series of outstanding legacy issues including those above can be directly explained within this unified phonon renormalization approach. For instance, a renormalized phonon naturally resolves the decade-long debate between dynamic and static dislocation–phonon scattering approaches, as two limiting cases. In particular, at nanoscale, both the dynamic and static approaches break down, while the present renormalization approach remains valid by capturing the size effect, showing good agreement with lattice dynamics simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cellular Automaton Modeling of Dynamic Recrystallization of Nimonic 80A Superalloy Based on Inhomogeneous Distribution of Dislocations Inside Grains

A modified cellular automaton (CA) model in the time and space scale is developed to simulate the dynamic recrystallization (DRX) mechanism of Nimonic 80A nickel-base superalloy during hot deformation. Some necessary thermo-mechanical parameters used as input data in CA approach such as work hardening and softening coefficient are fitted according to the previous hot compression experiments. Based on the experimental results, nucleation kinetics is modified as a function of Zener-Holloman parameter. A dislocation density model at transient recrystallization boundary is proposed, in which the dislocation density is a function of temperature, strain rate and annealed dislocation density. The simulated results are in good agreement with experimental results, proving that the modified CA model is capable of predicting both flow behavior and microstructural evolution of Nimonic 80A during hot deformation. According to the experimental and simulated results, the DRX behavior is discussed in detail. It demonstrates that the flow stress and microstructural evolution of DRX have a relationship with the deformation temperature and strain rate.

36 MATERIALS SCIENCE↗

Using lifetime of point defects for dislocation bias in bcc Fe

The interaction between dislocations and point defects is key to deformation processes and microstructural evolution of structural materials. In this work, we compute the lifetime of point defects to describe their interaction with dislocations. This approach can accurately account for the effects of the dislocation core and anisotropic defect dynamics to accumulatively determine the capture efficiency, sink strength, and dislocation bias at different temperatures and dislocation densities. Particularly, the absorption of point defects by straight screw and edge dislocations in a model bcc iron system is studied. The maximum swelling rates based on the obtained bias factors are in close agreement with a variety of experimental measurements, including both neutron and ion-irradiation data, especially when considering the survival fraction for point defects from displacement cascades. Further, this approach applies to many other processes and sinks, such as dislocation loops and interfaces, providing a powerful means to develop fundamental insights critical for improving radiation resistance and mechanical properties of structural materials through controlling defect interaction and evolution.

36 MATERIALS SCIENCE↗

Shear stress- and line length-dependent screw dislocation cross-slip in FCC Ni

Screw dislocation cross-slip is important in dynamic recovery of deformed metals. A mobile screw dislocation segment can cross slip to annihilate an immobile screw dislocation segment with opposite Burgers vector, leaving excess dislocations of one kind in a crystal. Previous studies have found that the cross-slip process depends on both the local stress state and dislocation line length, yet a quantitative study of the combined effects of these two factors has not been conducted. In this work, we employ both dynamic concurrent atomistic-continuum (CAC) [L. Xiong, G. Tucker, D.L. McDowell, Y. Chen, J. Mech. Phys. Solids 59 (2011) 160–177] and molecular dynamics simulations to explore the shear stress- and line length-dependent screw dislocation cross-slip in face-centered cubic Ni. It is demonstrated that the CAC approach can accurately describe the 3-D cross-slip process at a significantly reduced computational cost, as a complement to other numerical methods. In particular, we show that the Fleischer (FL) [R.L. Fleischer, Acta Metall. 7 (1959) 134–135] type cross-slip, in which a stair-rod dislocation is involved, can be simulated in the coarse-grained domain. Our simulations show that as the applied shear stress increases, the cross-slip mechanism changes from the Friedel-Escaig (FE) [B. Escaig, J. Phys. 29 (1968) 225–239] type to the FL type. In addition, the critical shear stress for both cross-slip mechanisms depends on the dislocation line length. Moreover, the cross-slip of a screw dislocation with a length of 6.47 nm analyzed using periodic boundary conditions occurs via only the FL mechanism, whereas a longer dislocation with length of 12.94 nm can cross-slip via either the FE or FL process in Ni subject to different shear stresses.

36 MATERIALS SCIENCE↗

Core structures analyses of (a+c)-edge dislocations in wurtzite GaN through atomistic simulations and Peierls–Nabarro model

The core structures and slip characteristics of (a+c)-edge dislocations on pyramidal planes in wurtzite GaN were investigated employing molecular dynamics simulations. Multiple stable core configurations are identified for dislocations along the glide and shuffle planes. The corresponding generalized-stacking-fault energy (GSFE) curves for the glide and shuffle slips are calculated. The GSFE curves, combined with the Peierls–Nabarro model, demonstrate that the shuffle slip is favored over the glide slip given the markedly lower Peierls energy and stress of the shuffle slip. Our findings also indicate that in general slip motions for (a+c)-edge dislocations are only possible at elevated temperature, and the necessity of further studies of thermally activated processes to better understand the dynamics of (a+c) dislocations in GaN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Line tension of a dislocation moving through an anisotropic crystal

Plastic deformation, at all strain rates, is accommodated by the collective motion of crystalline defects known as dislocations. In this paper, we extend an analysis for the energetic stability of a straight dislocation, the so-called line tension (Γ), to steady-state moving dislocations within elastically anisotropic media. Upon simplification to isotropy, our model reduces to an explicit analytical form yielding insight into the behaviour of Γ with increasing velocity. We find that at the first shear wave speed within an isotropic solid, the screw dislocation line tension diverges positively indicating infinite stability. The edge dislocation line tension, on the other hand, changes sign at approximately 80% of the first shear wave speed, and subsequently diverges negatively indicating that the straight configuration is energetically unstable. In anisotropic crystals, the dependence of Γ on the dislocation velocity is significantly more complex; at velocities approaching the first shear wave speed within the plane of the crystal defined by the dislocation line, Γ tends to diverge, with the sign of the divergence strongly dependent on both the elastic properties of the crystal and the orientation of the dislocation line. We interpret our analyses within the context of recent molecular dynamics simulations of the motion of dislocations near the first shear wave speed. Both the simulations and our analyses are indicative of instabilities of nominally edge dislocations within fcc crystals approaching the first shear wave speed. Finally, we apply our analyses towards predicting the behaviour of dislocations within bcc crystals in the vicinity of the first shear wave speed.

36 MATERIALS SCIENCE↗

Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy

Highlights: • Al-Mn-Si specimens were underwent severe plastic deformation by CGP and cold-rolling and their combined routes. • Microscopical observations depicted particles' fragmentation and non-preferential distribution under heavy straining. • XRD analysis revealed dislocations annihilation and lattice swelling (d-spacing increase) due to dynamic recrystallization. • Polarization outputs disclosed direct correlation of corrosion behavior with dislocations density. • Four-point probe test proved that electrical conductivity was a function of lattice d-spacing. - Abstract: Al-Mn-Si specimens were underwent SPD by CGP, cold-rolling and their combined paths. Acquired OM and SEM micrographs revealed that random distribution of intermetallic precipitates beside their fragmentation under heavy imposed strains deteriorated particles’ influence on the electrochemical corrosion and inhibited pitting. Analysis of XRD patterns pointed out that post-rolling of CGPed sheets resulted in dynamic annihilation of dislocations and accordingly crystal lattice swelling (d-spacing increase) due to dynamic recrystallization. From polarization results, crystallites’ refinement along with density increment of sub-grain boundaries within structure as a consequence of SPD beside dislocation density enhancement accelerated corrosion. Outputs of four-point probe electrical conductivity examination indicated that apart from the employed processing, lattice compaction and atomic layers approach would limit the electrons’ mobility space and hence reduce the conductivity of material. In this regard, combined effects of CGP and rolling as employed dual-straining route on Al-Mn-Si alloy enhanced the electrical conductivity by d-spacing growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solute effects upon dislocation motion and recovery in Mg alloys (Final Report)

The objective the research was to develop a firmer understanding of the interactions between substitutional solute atoms and dislocations within Mg alloys. These interactions govern the absolute and relative mobilities of various types of dislocations in Mg (e.g., basal < a>, non-basal < a>, and pyramidal < c+a>). Furthermore, they have an impact on dislocation recovery processes (e.g., cross-glide, climb, rearrangement, and annihilation). Ultimately, solute-dislocation interactions strongly impact a) strain hardening, b) strain rate sensitivity, c) plastic anisotropy of textured polycrystals, d) texture evolution, e) dislocation substructures evolution, and even f) recrystallization behavior. It is broadly known that Mg alloys exhibit poor low temperature formability. Since formability is largely governed by properties (a) – (c) in this list, it is critical to develop a better understanding of solute-dislocation interactions, if one hopes to improve the situation. While the theory of static solute strengthening is well developed, especially for alloys with face centered cubic (FCC) crystal structures, there are outstanding questions related to applications to hexagonal close packed (HCP) crystal structures and dynamic strain aging (DSA) in materials of various structures. DSA has far-reaching implications for metal formability and, in the case of Mg alloys, appears to correlate with the so-called rare-earth (RE) texture which has been shown to benefit formability. The Portevin-Le Chatelier (PLC) effect, and associated negative strain rate sensitivity, occur at higher temperatures (>100℃) in Mg alloys as compared with similar Al alloys, even though they have similar melting points and solute diffusivities. Our preliminary research has shown that modern, physics-based models of DSA can be tuned to describe the behavior of Mg alloys if a rather higher activation enthalpy is assumed for cross-core diffusivity. While this partially explains the delay in DSA to higher temperatures, it is also hypothesized that this delay is due in part to the intrinsically more thermally activated (rate sensitive) nature of non-basal < a> dislocation motion which is required for macroscopic flow of Mg alloys, whereas octahedral slip in many FCC metals like aluminum is essentially athermal at room temperature. It was originally proposed to employ a combination of in-situ diffraction-based experimental characterization to validate existing theory. It was envisioned to perform in-situ transmission electron microscopy (TEM) to assess individual dislocation behavior and in-situ high-energy X-ray diffraction (HEXRD) techniques which were showing great promise for elucidating collective dislocation behavior, 2 including recovery, especially if the contributions to various forms of diffraction peak broadening (𝜂𝜂,𝜔𝜔,and 2𝜃𝜃) can be effectively integrated. Finally, it was envisioned to perform discrete dislocation dynamics (DDD) modeling approaches to aide in the interpretation of both TEM and HEXRD experiments. In the end, mechanical tests were performed on more complex Mg alloys which exhibited evidence of dynamic strain aging, and this led to the establishment of another project. Mechanical test data obtained at McMaster University served as the basis of an assessment of the applicability of Bazinski’s “stress equivalence” theory of solute strengthening to polycrystalline alloys of Mg. Although we did not succeed in applying the approach to Mg alloys, we did develop expertise with the HEXRD approach using a BCC, β-Ti alloy and demonstrated numerous new capabilities that may be applied to any polycrystalline material in collaboration with researchers at CHESS and around the world: (1) assessment of details of the elastoplastic transition (yielding) using a combination of HEXRD and full-field polycrystal plasticity modeling, (2) the first-ever experimental observation of strong stress rotation within the individual grains of a polycrystalline material, and (3) a comprehensive analysis of the grain-level dislocation density evolution based upon diffraction peak broadening along 𝜂𝜂,𝜔𝜔,and 2𝜃𝜃 directions. This final aspect allowed us to confirm that dislocations were gliding on multiple plane types and not restricted to {110} type planes, and it also provided clues as to why some grains were unloading during straining, with surprising implications for our understanding of the effects of geometrically necessary dislocations (GNDs). Finally, graduate student, Mohammed Shabana, developed a MATLAB code which confirmed the conclusions of Prof. Catalin Picu (Rensallear Polytechnic Institute, RPI) regarding the effect of solute-trapped, forest dislocations on the breaking stress of Lomer lock junctions in FCC metal alloys. He applied the same anisotropic line-tension model to a variety of dislocation junction configurations and found an inconsistency in the widely cited results of Dupuy and Fivel regarding the Hirth Lock, and he outlined an approach to extend these finding to HCP Mg alloys that we are still pursuing with discretionary fundings at UVA.

36 MATERIALS SCIENCE↗

Fundamental Study of Fatigue Crack Initiation at Grain and Twin Boundaries in Austentic Stainless Steel (Final Technical Report)

The overarching goal of this project was to understand the dislocation-based mechanisms driving fatigue crack initiation at grain and twin boundaries. The hypothesis of the work is that dislocation structures equivalent to persistent slip bands (PSBs) form in the boundaries, leading to local stress concentrations and fatigue crack initiation. The sub-goals associated with this work include: • Understanding the evolution of the dynamic stress state and dislocation density surrounding PSB/grain boundary interactions. This will require the development of new techniques that couple high resolution electron backscatter diffraction (HREBSD) with in situ scanning electron microscopy (SEM) deformation. • Uncover the mechanisms by which dislocations are accommodated in grain and twin boundaries during fatigue. The proposed approach here is to conduct in situ transmission electron microscopy (TEM) deformation experiments on fatigued samples. • Establish correlations between microstructure, deformation accommodation, and crack initiation across time and length scales. This work primarily focuses on understanding fatigue crack initiation in austenitic stainless steels, though promising work by an undergraduate researcher extended the work to high purity Al.

42 ENGINEERING↗