Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Biomass Burning Aerosol Absorption Measurements with MODIS Using the Critical Reflectance Method

This research uses the critical reflectance technique, a space-based remote sensing method, to measure the spatial distribution of aerosol absorption properties over land. Choosing two regions dominated by biomass burning aerosols, a series of sensitivity studies were undertaken to analyze the potential limitations of this method for the type of aerosol to be encountered in the selected study areas, and to show that the retrieved results are relatively insensitive to uncertainties in the assumptions used in the retrieval of smoke aerosol. The critical reflectance technique is then applied to Moderate Resolution Imaging Spectrometer (MODIS) data to retrieve the spectral aerosol single scattering albedo (SSA) in South African and South American 35 biomass burning events. The retrieved results were validated with collocated Aerosol Robotic Network (AERONET) retrievals. One standard deviation of mean MODIS retrievals match AERONET products to within 0.03, the magnitude of the AERONET uncertainty. The overlap of the two retrievals increases to 88%, allowing for measurement variance in the MODIS retrievals as well. The ensemble average of MODIS-derived SSA for the Amazon forest station is 0.92 at 670 nm, and 0.84-0.89 for the southern African savanna stations. The critical reflectance technique allows evaluation of the spatial variability of SSA, and shows that SSA in South America exhibits higher spatial variation than in South Africa. The accuracy of the retrieved aerosol SSA from MODIS data indicates that this product can help to better understand 44 how aerosols affect the regional and global climate.

Zhu, Li↗
NASA NTRS2012

Aerosol Remote Sensing from AERONET, the Ground-Based Satellite

Atmospheric particles including mineral dust, biomass burning smoke, pollution from carbonaceous aerosols and sulfates, sea salt, impact air quality and climate. The Aerosol Robotic Network (AERONET) program, established in the early 1990s, is a federation of ground-based remote sensing aerosol networks of Sun/sky radiometers distributed around the world, which provides a long-term, continuous and readily accessible public domain database of aerosol optical (e.g., aerosol optical depth) and microphysical (e.g., aerosol volume size distribution) properties for aerosol characterization, validation of satellite retrievals, and synergism with Earth science databases. Climatological aerosol properties will be presented at key worldwide locations exhibiting discrete dominant aerosol types. Further, AERONET's temporary mesoscale network campaign (e.g., UAE2, TIGERZ, DRAGON-USA.) results that attempt to quantify spatial and temporal variability of aerosol properties, establish validation of ground-based aerosol retrievals using aircraft profile measurements, and measure aerosol properties on compatible spatial scales with satellite retrievals and aerosol transport models allowing for more robust validation will be discussed.

Holben, Brent N.↗
NASA NTRS2017

Curved Displacement Transfer Functions for Geometric Nonlinear Large Deformation Structure Shape Predictions

For shape predictions of structures under large geometrically nonlinear deformations, Curved Displacement Transfer Functions were formulated based on a curved displacement, traced by a material point from the undeformed position to deformed position. The embedded beam (depth-wise cross section of a structure along a surface strain-sensing line) was discretized into multiple small domains, with domain junctures matching the strain-sensing stations. Thus, the surface strain distribution could be described with a piecewise linear or a piecewise nonlinear function. The discretization approach enabled piecewise integrations of the embedded-beam curvature equations to yield the Curved Displacement Transfer Functions, expressed in terms of embedded beam geometrical parameters and surface strains. By entering the surface strain data into the Displacement Transfer Functions, deflections along each embedded beam can be calculated at multiple points for mapping the overall structural deformed shapes. Finite-element linear and nonlinear analyses of a tapered cantilever tubular beam were performed to generate linear and nonlinear surface strains and the associated deflections to be used for validation. The shape prediction accuracies were then determined by comparing the theoretical deflections with the finiteelement- generated deflections. The results show that the newly developed Curved Displacement Transfer Functions are very accurate for shape predictions of structures under large geometrically nonlinear deformations.

displacement theory↗
NASA NTRS2021

Characterization of Bidirectional Transmissive and Reflective Properties of Black Silicon

This paper describes the initial work of characterizing the transmissive and reflective properties of black silicon diffusers. The diffusers were fabricated from a 100 mm diameter black silicon sample at NASA’s Goddard Space Flight Center (GSFC). The directional hemispherical reflectance from 250 nm to 2500 nm and BRDF/BTDF measurements at 632.8 nm, 1064 nm, and 1550 nm were measured using the GSFC Diffuser Calibration Laboratory’s (DCL) spectrophotometer and optical scatterometer. The diffusers exhibit a low level of specular reflection up to ~1100 nm with no evidence of retroscatter. The measurements are traceable to those made at the National Institute of Standards and Technology (NIST).

Bidirectional Reflectance Distribution Function↗
NASA NTRS2019

Shape Sensing for Wings with Spars and Ribs Using Simulated Strain

Active trim shape control can be used to minimize error between target and actual aircraft trim shape during flight. Trim shape sensing for aircraft during flight is not only important for highly flexible aircraft, such as the National Aeronautics and Space Administration (NASA) Helios Prototype remotely piloted flying wing aircraft, but also for a delta-wing type aircraft, such as a supersonic commercial transport aircraft. A two-step theory utilizing distributed strain for a real-time shape sensing of a full three-dimensional structure has been introduced previously. This study focuses on the application of the two-step theory to finite element models of a wing with spars and ribs such as the X-59 QueSST aircraft (Lockheed Martin Corporation, Bethesda, Maryland), a tapered wing, a dihedral/anhedral wing, and a stiffened dihedral/anhedral wing. A finely meshed finite element structural model is desired to capture accurate curvature distributions along the neutral axes of the wing cross sections during pre-test analysis for shape sensing of a wing with ribs and spars. The two-step theory used in this study gives excellent deformation correlation with the MSC/NASTRAN (MSC Software, Newport Beach, California) results along the neutral axis for all test cases used in this study except the X-59 QueSST aircraft.

strain↗
NASA NTRS2010

Spatial Patterns of Snow Cover in North Carolina: Surface and Satellite Perspectives

Snow mapping is a common practice in regions that receive large amounts of snowfall annually, have seasonally-continuous snow cover, and where snowmelt contributes significantly to the hydrologic cycle. Although higher elevations in the southern Appalachian Mountains average upwards of 100 inches of snow annually, much of the remainder of the Southeast U.S. receives comparatively little snowfall (< 10 inches). Recent snowy winters in the region have provided an opportunity to assess the fine-grained spatial distribution of snow cover and the physical processes that act to limit or improve its detection across the Southeast. In the present work, both in situ and remote sensing data are utilized to assess the spatial distribution of snow cover for a sample of recent snowfall events in North Carolina. Specifically, this work seeks to determine how well ground measurements characterize the fine-grained patterns of snow cover in relation to Moderate- Resolution Imaging Spectroradiometer (MODIS) snow cover products (in this case, the MODIS Fractional Snow Cover product).

Fuhrmann, Christopher M.↗
NASA NTRS2021

Mangrove Carbon Stocks in Pongara National Park, Gabon

Mangroves are recognized for their valued ecosystem services to coastal areas, and the functional linkages between those services and ecosystem carbon stocks have been established. However, spatially explicit inventories are necessary to facilitate management and protection of mangroves, as well as providing a foundation for payment for ecosystem service programs such as REDD+. We conducted an inventory of carbon stocks in mangroves within Pongara National Park (PNP), Gabon using a stratified random sampling design based on forest canopy height derived from TanDEM-X remote sensing data. Ecosystem carbon pools, including aboveground and belowground biomass and necromass, and soil carbon to a depth of 2 m were assessed using measurements and samples from plots distributed among three canopy height classes within the park. There were two mangrove species within the inventory area in PNP, Rhizophora racemosa and R. harrisonii. R. harrisonii was predominant in the sparse, low-stature stands that dominated the west side of the park. In the east side of the park, both species occurred in tall-stature stands, with tree height often exceeding 30 m. Canopy height was an effective means to stratify the inventory area, as biomass was significantly different among the height classes. Despite those differences in aboveground biomass, the soil carbon density was not significantly different among height classes. Soils were the main component of the ecosystem carbon stock, accounting for over 84% of the total. The ecosystem carbon density ranged from 644 to 943 Mg C ha−1 among the three height classes. The ecosystem carbon stock within PNP is estimated to be 40,588 Gg C. The combination of pre-inventory information about stand conditions and their spatial distribution within the assessment area obtained from remote sensing data and a spatial decision support system were fundamental to implementing this relatively large-scale field inventory. This work exemplifies how mangrove carbon stocks can be quantified to augment national C reporting statistics, provide a baseline for projects involving monitoring, reporting and verification (i.e., MRV), and provide data on the forest composition and structure for sustainable management and conservation practices.

Carl C Trettin↗
NASA NTRS1988

Microwave remote sensing of soil moisture

Knowledge of soil moisture is important to many disciplines, such as agriculture, hydrology, and meteorology. Soil moisture distribution of vast regions can be measured efficiently only with remote sensing techniques from airborne or satellite platforms. At low microwave frequencies, water has a much larger dielectric constant than dry soil. This difference manifests itself in surface emissivity (or reflectivity) change between dry and wet soils, and can be measured by a microwave radiometer or radar. The Microwave Sensors and Data Communications Branch is developing microwave remote sensing techniques using both radar and radiometry, but primarily with microwave radiometry. The efforts in these areas range from developing algorithms for data interpretation to conducting feasibility studies for space systems, with a primary goal of developing a microwave radiometer for soil moisture measurement from satellites, such as EOS or the Space Station. These efforts are listed.

Shiue, J. C.↗
NASA NTRS1996

The unusual X-ray collision morphology of NGC 4782/4783 (3C 278)

Deep Rosat high resolution imager (HRI) observations of the X-ray emitting gas associated with the colliding elliptical galaxy pair NGC 4782 and NGC 4783 reveals the gas distribution in a pair of close interacting ellipticals. The HRI image shows hot gas around each galaxy pair and a sheet of gas at the interaction interface between the two galaxies. The hot gas distributions do not peak at the optical centers of the galaxies, but are displaced in the same sense as the tidal distensions seen in the optical luminosity distributions.

Borne, Kirk↗
NASA NTRS1995

The Unusual X-Ray Collision Morphology of NGC 4782/4783 (3C 278)

Deep ROSAT HRI (High-Resolution Imager) imaging of the X-ray-emitting gas associated with the colliding elliptical galaxy pair NGC 4782/4783 reveals for the first time the complexity of the hot gas distribution in a pair of close interacting galaxies. The HRI image of NGC 4782/4783 shows hot gas around each galaxy, a high surface brightness X-ray bridge connecting the galaxy pair, tidal-like tails emerging from the two galaxies, and a sheet of gas at the interaction interface between the two galaxies. The hot gas distributions do not peak at the optical centers of the galaxies but are displaced in the same sense as the tidal distensions seen in the optical luminosity distributions. All of these remarkable features show the complexity of structure that develops in the hot gas distribution when both hydrodynamical and tidal forces come into play during collisions between ellipticals with hot gas components. Models by Borne and Colina of the bent two-sided radio jet 3C 278 (associated with NGC 4782) indicated that there must be a strong interaction between the hot gas components of NGC 4782,/4783 and that the deflection of the radio jets is likely caused by the ram pressure exerted on the jet plasma by the hot gas associated with the passing companion NGC 4783. These conclusions are qualitatively confirmed by the HRI image and substantiate the major role played by the hot interstellar medium, and its asymmetries, in the propagation and entrainment of radio jets in colliding radio host ellipticals.

Colina, Luis↗
NASA NTRS1994

Integration of remote sensing and hydrologic modeling through multi-disciplinary semiarid field campaigns: Moonsoon 1990, Walnut Gulch 1992, and SALSA-MEX

A research and modeling strategy is presented for development of distributed hydrologic models given by a combination of remotely sensed and ground based data. In support of this strategy, two experiments Moonsoon'90 and Walnut Gulch'92 were conducted in a semiarid rangeland southeast of Tucson, Arizona, (U.S.) and a third experiment, the SALSA-MEX (Semi Arid Land Surface Atmospheric Mountain Experiment) was proposed. Results from the Moonsoon'90 experiment substantially advanced the understanding of the hydrologic and atmospheric fluxes in an arid environment and provided insight into the use of remote sensing data for hydrologic modeling. The Walnut Gulch'92 experiment addressed the seasonal hydrologic dynamics of the region and the potential of combined optical microwave remote sensing for hydrologic applications. SALSA-MEX will combine measurements and modeling to study hydrologic processes influenced by surrounding mountains, such as enhanced precipitation, snowmelt and recharge to ground water aquifers. The results from these experiments, along with the extensive experimental data bases, should aid the research community in large scale modeling of mass and energy exchanges across the soil-plant-atmosphere interface.

Moran, M. S.↗
NASA NTRS2019

Spatial Distribution of Aerosol Microphysical and Optical Properties and Direct Radiative Effect from the China Aerosol Remote Sensing Network

Multi-year observations of aerosol microphysical and optical properties, obtained through ground-based remote sensing at 50 China Aerosol Remote Sensing Network (CARSNET) sites, were used to characterize the aerosol climatology for representative remote, rural, and urban areas over China to assess effects on climate. The annual mean effective radii for total particles (ReffT) decreased from north to south and from rural to urban sites, and high total particle volumes were found at the urban sites. The aerosol optical depth at 440 nm (AOD440 nm) increased from remote and rural sites (0.12) to urban sites (0.79), and the extinction Ångström exponent (EAE440–870 nm) increased from 0.71 at the arid and semi-arid sites to 1.15 at the urban sites, presumably due to anthropogenic emissions. Single-scattering albedo (SSA440 nm) ranged from 0.88 to 0.92, indicating slightly to strongly absorbing aerosols. Absorption AOD440 nm values were 0.01 at the remote sites versus 0.07 at the urban sites. The average direct aerosol radiative effect (DARE) at the bottom of atmosphere increased from the sites in the remote areas (−24.40 W m−2) to the urban areas (−103.28 W m−2), indicating increased cooling at the latter. The DARE for the top of the atmosphere increased from −4.79 W m−2 at the remote sites to −30.05 W m−2 at the urban sites, indicating overall cooling effects for the Earth–atmosphere system. A classification method based on SSA440 nm, fine-mode fraction (FMF), and EAE440–870 nm showed that coarse-mode particles (mainly dust) were dominant at the rural sites near the northwestern deserts, while light-absorbing, fine-mode particles were important at most urban sites. This study will be important for understanding aerosol climate effects and regional environmental pollution, and the results will provide useful information for satellite validation and the improvement of climate modelling.

Huizheng Che↗
NASA NTRS1985

Proceedings of the NASA Symposium on Global Wind Measurements

This Proceedings contains a collection of the papers which were presented at the Symposium and Workshop on Global Wind Measurements. The objectives and agenda for the Symposium and Workshop were decided during a planning meeting held in Washington, DC, on 5 February 1985. Invited papers were presented at the Symposium by meteorologists and leading experts in wind sensing technology from the United States and Europe on: (1) the meteorological uses and requirements for wind measurements; (2) the latest developments in wind sensing technology; and (3) the status of our understanding of the atmospheric aerosol distribution. A special session was also held on the latest development in wind sensing technology by the United States Air Force.

Baker, Wayman E.↗
NASA NTRS1975

A chemical model of the troposphere and stratosphere

A time-dependent, one-dimensional model of the coupled chemistry and vertical mixing of the atmosphere is used to compute the distribution for many atmospheric constituents of the troposphere and stratosphere. The model treats the photochemistry of the carbon-hydrogen-oxygen-nitrogen system and is (with the exception of H2O) self-consistent in the sense of requiring no assumptions regarding minor constituent distributions.

Stewart, R. W.↗
NASA NTRS1992

The distribution of anorthosite on the nearside of the moon

Remote sensing studies of lunar basin and crater deposits were conducted in order to determine the composition of surface units and to investigate the stratigraphy of the lunar crust. These studies have combined both visible and near-IR spectral observations with multispectral imaging in order to determine the lithology of relatively small portions (2-10 km) of the lunar surface. Numerous deposits of pure anorthosite (plagioclase greater than 90 percent) were identified and an interesting pattern has emerged. The purposes of this report are as follows: (1) to summarize the results of our previous studies of the distribution of anorthosite; (2)to present new findings concerning the modes of occurrence of lunar anorthosite; and (3) to assess the implication for the magma ocean hypothesis.

Hawke, B. R.↗
NASA NTRS2000

A Decision Support Information System for Urban Landscape Management Using Thermal Infrared Data

In this paper, we describe efforts to use remote sensing data within the purview of an information support system, to assess urban thermal landscape characteristics as a means for developing more robust models of the Urban Heat Island (UHI) effect. We also present a rationale on how we have successfully translated the results from the study of urban thermal heating and cooling regimes as identified from remote sensing data, to decision-makers, planners, government officials, and the public at large in several US cities to facilitate better understanding of how the UHI affects air quality. Additionally, through the assessment of the spatial distribution of urban thermal landscape characteristics using remote sensing data, it is possible to develop strategies to mitigate the UHI that hopefully will in turn, drive down ozone levels and improve overall urban air quality. Four US cities have been the foci for intensive analysis as part of our studies: Atlanta, GA, Baton Rouge, LA, Salt Lake City, UT, and Sacramento, CA. The remote sensing data for each of these cities has been used to generate a number of products for use by "stakeholder" working groups to convey information on what the effects are of the UHI and what measures can be taken to mitigate it. In turn, these data products are used to both educate and inform policy-makers, planners, and the general public about what kinds of UHI mitigation strategies are available.

Quattrochi, Dale A.↗
NASA NTRS2006

To What Extent Can Raindrop Size Be Determined by a Multiple-Frequency Radar?

In this paper, an analytical treatment of the atmospheric remote sensing problem of determining the raindrop size distribution (DSD) with a spaceborne multifrequency microwave nadir-looking radar system is presented. It is typically assumed that with two radar measurements at different frequencies one ought to be able to calculate two state variables of the DSD: a bulk quantity, such as the rain rate, and a distribution shape parameter. To determine if this nonlinear problem can indeed be solved, the DSD is modeled as a Gamma distribution and quadratic approximations to the corresponding radar-rain relations are used to examine the invertibility of the resulting system of equations in the case of two as well as three radar frequencies. From the investigation, it is found that for regions of DSD state space multiple solutions exist for two or even three different frequency radar measurements. This should not be surprising given the nonlinear coupled nature of the problem.

rain characteristics↗
NASA NTRS2020

Fiber-Optic Strain-Based Deflection and Twist Sensing for a High-Aspect-Ratio Swept Wing

Designs of aircraft structures have been moving toward leaner, lightweight designs for increased fuel efficiency. The Passive Aeroelastic Tailored (PAT) wing developed under the NASA Advanced Air Transport Technology (AATT) project is an example of a swept-wing design with high aspect ratio that incorporates lightweight highly-flexible tailored composite construction. The passive aeroelastic tailored structural design has explored the design space to enable aeroelastically tailored wing structures to increase aspect ratios (from 9 to 14) and ultimately reduce weight by 20 percent to 25 percent without impacting aeroelastic performance. To further study the aeroelastic performance of such a wing, the NASA Armstrong Flight Research Center (AFRC) (Edwards, California) has developed efficient real-time structural algorithms that are used in conjunction with a fiber-optic measurement system for lightweight vehicle applications. The AFRC Fiber Optic Sensing System (FOSS) provides up to 8,000 distributed surface strain measurements at one-half-inch increments and can be used to estimate a variety of structural parameters such as shape and load. This report discusses the implementation of strain-based displacement and twist-sensing techniques applied to the PAT wing test article tested at the NASA AFRC Flight Loads Laboratory. Empirical FOSS strain data are collected under varying loading conditions. Strain data are processed with the displacement and twist-sensing algorithms and independently verified by comparison to conventional ground-based instrumentation.

Pena, Francisco↗