Search NASA⌕ Search

SEARCH · Search NASA

Results for “Drop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An additively-manufactured molten salt-to-supercritical carbon di-oxide primary heat exchanger for solar thermal power generation – Design and techno-economic performance

The design and techno-economic performance of a compact additively manufactured (AM) molten salt (MS)-to-supercritical carbon di-oxide (sCO2) primary heat exchanger (PHE) for solar thermal application is described. The PHE design consists of sCO2 flow through an array of microscale pin fins while the MS flows through mm-scale rectangular channels. Constraints imposed by AM using laser powder bed fusion method are considered in the design. Structural and fluid flow simulations are performed to arrive at a viable design of the core and headers. A simplified one-dimensional steady state model for the PHE is developed including the impact of surface roughness from the AM process. A process-based cost model is used to determine the tradeoff between thermofluidic design and manufacturing cost. A parametric study is performed using the thermo-fluidic and cost models to determine the set of geometrical and flow variables that result in high power density and low cost, while restricting the pressure drop on the sCO2 side to less than 2% of line pressure. Flow rates of MS and sCO2 were varied over heat capacity rate ratios ranging from 0.2 to 1. Results indicate that it is possible to design a low-pressure drop AM PHE with an effectiveness of 90% and a power density in excess of 10 MW/m3 (including headers). Fabrication of representative nickel superalloy specimens are shown to demonstrate that low-porosity parts with the requisite dimensional tolerance of PHE core can be generated.

14 SOLAR ENERGY↗
DOE OSTI2024

Kelvin-Helmholtz instability as one of the key features for fast and efficient emulsification by hydrodynamic cavitation

The paper investigates the oil–water emulsification process inside a micro-venturi channel. More specifically, the possible influence of Kelvin-Helmholtz instability on the emulsification process. High-speed visualizations were conducted inside a square venturi constriction with throat dimensions of 450 µm by 450 µm, both under visible light and X-Rays. We show that cavity shedding caused by the instability results in the formation of several cavity vortices. Their rotation causes the deformation of the oil stream into a distinct wave-like shape, combined with fragmentation into larger drops due to cavitation bubble collapse. Later on, the cavity collapse further disperses the larger drops into a finer emulsion. Thus, it turns out that the Kelvin-Helmholtz instability is similarly characteristic for hydrodynamic cavitation emulsification inside a microchannel as is the Rayleigh-Taylor instability for acoustically driven emulsion formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Air Capture Using Aqueous Amino Acid Solvents in a Crossflow Absorber

Carbon dioxide (CO 2 ) is the most abundant of all greenhouse gases (GHGs). CO 2 levels in the atmosphere are 50% higher than in the preindustrial era, trapping heat. CO 2 removal from the atmosphere by direct air capture (DAC) is needed to achieve the internationally agreed global temperature goals. The most common CO 2 capture technology is absorption by aminebased solvents in packed columns. Amino acid solutions have recently gained attention due to their advantages over traditional amine solvents. To be implemented effectively, DAC industrial processes need to handle large airflow rates in separation absorbers. The large air and solvent flow rates preclude the use of countercurrent columns due to high-pressure drops and the occurrence of flooding. Crossflow air−liquid absorbers are used to handle large air and liquid volumes due to their lower-pressure drop. The objective of this work is to study the influence of crossflow absorber geometric parameters and operating conditions on product formation and process efficiency. An already derived theoretical model for countercurrent absorbers has been modified to simulate the operation of a crossflow DAC absorber. The predictive model was implemented into a computer code that was used to study the efficiency of the processes as geometric equipment dimensions and operating parameters vary. Practical suggestions are made to design more efficient DAC processes.

Absorption↗
DOE OSTI2020

Hydrodynamic Characterization of a Shallow Rectangular Spouted Bed Using Bed Pressure Signals and Image Processing Methods

To support the design of spouted bed reactors, experiments are performed in a rectangular spouted bed to measure the peak pressure drop (Δ P max ) and the internal and external spouting velocities ( U is and U es ). Four particle types spanning under Geldart D and B are used. U is and U es are measured from bed pressure drop and expansion ratio profiles, respectively, with the U es / U is ratio of each particle type obtained. Additionally, correlations predicting the Δ P max of Geldart D and B particles are developed by reviewing published correlations and investigating the nozzle effect. Good prediction is achieved with a slope of 0.997 and an adjusted R 2 of 0.998 in a 95% confidence interval. U es is predicted through correlations developed by adding effects of d p / D i and H 0 in the Mathur–Gishler equation. The calculated U es agrees well with the experimental data, achieving a slope of 0.998 and an adjusted R 2 of 0.998 in a 95% confidence interval.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aqueous TiO 2 Nanoparticles React by Proton-Coupled Electron Transfer

Redox reactions of aqueous colloidal TiO 2 4 nm nanoparticles (NPs) have been examined, including both citratecapped and uncapped NPs (c-TiO 2 and uc-TiO 2 ). Photoreduction gave stable blue colloidal c-TiO 2 R NPs with 10–60 electrons per particle. Equilibration of these reduced NPs with soluble redox reagents such as methylviologen (MV 2+ ) provided measurements of the colloid reduction potential as a function of pH. The potentials of c-TiO 2 from pH 2–9 varied linearly with pH, with a slope of –60 ± 5 mV/pH. Estimates of the potential at pH 12 were consistent with extrapolating that line to high pH. The reduction potentials did not correlate with the zeta potentials (ζ) or the surface charge of the NPs across this pH range. Similar reduction potentials were observed for c- and uc-TiO 2 at low pH even though they have quite different ζ potentials. These results show that the common surface-charging explanation of the pH dependence is not tenable in these systems. Oxidation of reduced c-TiO 2 R with the electron-transfer oxidant potassium triiodide (KI 3 ) occurred with a significant drop in pH, showing that protons were released when the electrons were removed from the NPs. Smaller pH drops were observed for the proton-coupled electron transfer (PCET) reagents O 2 (air) and 4-MeO-TEMPO (4-methoxy-2,2,6,6-tetramethylpiperine-1-oxy radical). The difference in the number of protons released with KI 3 vs O 2 and 4-MeO-TEMPO was roughly one proton per electron removed. Thus, the thermodynamically preferred reactivity of these colloidal TiO 2 NPs is PCET over the pH 2–13 range studied. The measured redox potentials refer to the chemical process TiO 2 + H + + e – → TiO 2 ·e – ,H + ; and therefore they do not correspond with an electronic energy such as a conduction band edge or flat band potential. The 1e – /1H + stoichiometry means that the TiO 2 reduction potentials correspond to a TiO 2 –H bond dissociation free energy (BDFE), determined to be 49 ± 2 kcal mol –1 . The PCET description is consistent with the pH dependence of E(TiO 2 /TiO 2 ·e – ,H + ), the release of protons upon oxidation, the lack of correlation with ζ potentials, the similarity of capped and uncapped NPs, and the small change in the potential and BDFE from the first to the last electron/proton pair (H atom) removed. Furthermore, this behavior is suggested to be the norm for redox-active oxide/water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Strong Reduction in Amplitude of the Interfacial Segmental Dynamics in Polymer Nanocomposites

Despite the wide use of polymer nanocomposites (PNCs) in various applications, our understanding of the microscopic parameters controlling their macroscopic properties remains limited. In this study, we examine the dielectric strength of segmental dynamics, Δε IL (T) in the interfacial polymer layer surrounding the nanoparticles in PNCs. The presented analysis reveals a significant drop in Δε IL (T) and its anomalous temperature dependence in the polymer layer adsorbed to nanoparticles. The drop in Δε IL (T) was observed in all samples regardless of whether segmental relaxation time in the interfacial layer was slower or faster than in the bulk polymer, excluding interpretation of the “dead” layer. We ascribe the observed decrease in the dielectric strength to the restricted amplitude of segmental relaxation in the interfacial/adsorbed layer. Our results provide a new perspective on discussion of dynamics in the interfacial layer in PNCs and thin polymer films, demonstrating that not only segmental relaxation time but also its amplitude can be strongly affected by the interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ion specific, thin film confinement effects on conductivity in polymerized ionic liquids.

Acrylate-based polymerized ionic liquids (PILs) with ammonium (Am) or imidazolium (Im) cations and tetrafluoroborate (BF4) or bis(trifluoromethanesulfonyl)imide (TFSI) anions were synthesized and spin coated onto gold interdigitated electrodes on silica to investigate nanoconfinement effects on ion transport. The film thickness ranged from 23 to 313 nm. A significant reduction of the in-plane conductivity was observed in some PIL thin films with thickness below 100 nm. Specifically, Am BF4 PIL showed the largest conductivity drop (ca. 50% difference between a 22 nm and a 261 nm film) while Im TFSI PIL showed almost no change under confinement. The difference in conductivity drop is discussed in terms of (i) differences in interfacial layer thickness by fitting a two-layer conductivity model and (ii) potential changes in glass transition temperature (T-g) under confinement, which were estimated using the Vogel-Fulcher-Tammann fits of bulk conductivities. Decreasing film thickness also caused the dielectric loss peaks to shift to lower frequency, indicating that the ion diffusion process slowed under confinement.

Zhao, Qiujie↗
DOE OSTI2021

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

In this report a complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiCLO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm 2 ) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO 4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO 4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO 4 can also suppress the AI corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO 4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.

25 ENERGY STORAGE↗
DOE OSTI2025

Morphological Degradation of Oxygen Evolution Reaction-Electrocatalyzing Nickel Selenides at Industrially Relevant Current Densities

We investigated electrodeposited nanoparticulate nickel selenide (pre)catalysts that transform into nickel oxides/ oxyhydroxides under oxygen evolution reaction conditions in alkaline solutions. Previous studies of this transformation were conducted at lower current densities than those of industrial relevance (≥1 A cm −2 ). We used ultramicroelectrodes (UMEs) to achieve such current densities, benefiting from their small size, ensuring low absolute currents and low ohmic drop but high current densities. Morphological degradation of the catalyst material was only observed at current densities exceeding 1 A cm −2 but not for smaller ones. Using X-ray absorption, Xray photoemission spectroscopy, and X-ray diffraction, we confirmed that the degradation was accompanied by the literature-known transformation of nanoparticulate Ni 3 Se 2 (bulk)/NiSe (surface) into nickel oxyhydroxide. The transformation of the precatalyst goes along with a significant improvement in the charge transfer kinetics observed by decreasing Tafel slopes with ongoing experimental time extracted from cyclic voltammetry (CV) experiments and electrochemical impedance spectroscopy (EIS) in the high-frequency range. However, these kinetic improvements are accompanied by limitations in mass transport concluded from decreasing current responses at high overpotentials in CVs and increasing impedance in the low-frequency range of the EIS spectra after extended CV cycling. These mass transport limitations originated from morphological degradations at the UME exceeding 1 A cm −2 which we proved by applying identical location scanning electron microscopy. This has not been reported in studies that have been limited to lower current densities before. Our findings showcase how UMEs can be used to study (pre)catalysts (herein nickel selenides) under current densities of industrial relevance in the absence of ohmic drop-related ambiguities, combined with in-depth materials characterization studies, e.g., identical location microscopy and advanced spectroscopic methods. This approach enables direct evaluation and comparison of catalyst materials and thus demonstrates how to overcome long-standing limitations of electrocatalyst design and testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Versatile Method for Creating Ultrathin Films of Polyzwitterions with Antifouling Properties

Protein repellent (i.e., antifouling) properties of ultrathin polymeric films have been ascribed to the formation of a dense layer of adsorbed polymers, which causes steric hindrance to protein adsorption on underlying substrates. The antifouling properties of the films are hypothesized to be independent of polymer hydrophilicity based on previous studies involving uncharged polymers. Here, to test the hypothesis and extend it to the realm of charged polymers, we have developed a grafting method for creating ultrathin layers of polyzwitterions on solid surfaces. To demonstrate the efficacy of this method, poly[1-(3-sulfopropyl-1)-2-vinylpyridinium betaine] (P2VPPS) was synthesized via free-radical polymerization and immobilized onto surfaces by using a photoreactive benzophenone derivative as the cross-linker, which was covalently bonded to either quartz or Si/SiOx substrates through a silane anchor. We found that ultrathin films with thicknesses of less than 10 nm can be obtained in dry states using 365 nm ultraviolet (UV) cured/cross-linked surface coatings. These films were found to be hydrophilic and undergo structural rearrangements in the presence of water. The antifouling performance of the films was evaluated using Pseudomonas aeruginosa strain PAO1 bacterium as the fouling agent and exhibited antifouling properties with a kinetic control via the coating method (i.e., spin-coating and drop-casting). In particular, the surface area coverages due to the PAO1 cell attachment on the quartz substrates coated with P2VPPS were found to be ∼5% and ∼0% for the spin-coated and drop-casted films, respectively, after 4 h. These results show that the grafting method can be used to generate surfaces with antifouling properties based on ultrathin films of polyzwitterions.

Pseudomonas aeruginosa↗
DOE OSTI2020

Promoting the cleavage of C-O bonds at the interface between a metal oxide cluster and a Co(0001) support

As a first step toward the rational design of Co-based catalysts with a higher activity and selectivity, we determine how one can activate a C-O bond at the interface between a metal oxide cluster and a Co(0001) support. The hypothesis here is that the metal ions in metal oxide clusters on a Co(0001) support enhance the adsorption of CO and weaken the C-O bond strength, which can then facilitate the dissociation of the CO reactant. To test this hypothesis, we developed three computational models of Ti4O8/Co(0001), Zr4O8/Co(0001), and Mn8O8/Co(0001). We quantify the CO adsorption behavior at the interface sites between an oxide cluster and the Co(0001) support as well as the corresponding IR spectra. We correlate the computed CO stretch frequencies with their CO adsorption energies, as well as the CO stretch frequency with the C-O bond length, and related these findings to the changes in the chemical bonding in the bound CO. The interface is the most favorable site for CO adsorption. Adsorption results in an increase of the C-O bond length and a decrease in its vibrational frequency. From a chemical bonding analysis, the bond order in CO at this site drops from 3 (in the gas phase) to 1. This decrease in bond order is a necessary precursor stage for CO dissociation. The experimental measurements of the corresponding FTIR spectra support this point. The favorability of CO adsorption at the interface sites is due to an electron transfer from the metal ion in the metal oxide cluster to the O atom in CO. We establish a linear relationship between C-O bond length and CO frequency and this relationship is found to be independent of the support, type of metal oxide cluster, or the adsorption site.

Fischer-Tropsch Synthesis, Heterogeneous Catalysis↗
DOE OSTI2019

Simulating a Mesoscale Convective System Using WRF with a New Spectral Bin Microphysics: Part 1: Hail vs Graupel

A modified Fast Spectral Bin Microphysics scheme (FSBM-2) embedded into the Weather Research and Forecasting Model (WRF) is used to simulate a mesoscale deep convective system observed during the Midlatitude Continental Convective Clouds Experiment (MC3E). FSBM-2 uses modified source codes as compared to the current FSBM (FSBM-1). In contrast to FSBM-1, FSBM-2 can simulate hail of several cm in diameter and includes additional processes such as spontaneous breakup of raindrops and aerosol regeneration by drop evaporation. It is shown that allowing large hail particles of diameters exceeding about 1 cm substantially increases the agreement between the simulated and observed squall-line structures both in the convective and stratiform regions. In contrast, if graupel particles are used to represent high-density hydrometeors in convective areas, the ratio of convective-to-stratiform areas diverges from the ratio seen in observations and maximum radar reflectivities are substantially underestimated. Analysis of snow size distributions in the stratiform area shows an important link between the ice crystals formed by homogeneous freezing in the convective area to ice particle number concentration in the stratiform region. Simulated raindrop size distributions in the stratiform area below the melting level from FSBM-2 show a good agreement with observations. The regeneration of CCN by droplet evaporation and detrainment of these CCN to the stratiform region increases the concentration of CCN there up to 8-9 km altitude; the additional CCN penetrate clouds and produce new droplets, leading to some convection intensification. Key words: Mesoscale convective systems (MCS), squall lines, spectral bin microphysics, large hail, in-cloud nucleation, size distributions of hydrometeors in MCS.

Shpund, Kobby↗
DOE OSTI2020

The Role of Ice Splintering on Microphysics of Deep Convective Clouds Forming Under Different Aerosol Conditions: Simulations Using the Model With Spectral Bin Microphysics

Observations during the Ice in Clouds Experiment-Tropical (ICE-T) field experiment show that the ice particles concentration in a developing deep convective clouds at the level of T = -15 °C reached about 500 L -1 , that is, many orders higher than that of ice-nucleating particle. To simulate microphysics of these clouds, the 2-D Hebrew University Cloud model (HUCM) with spectral bin microphysics was used in which two main types of ice multiplication mechanisms were included in addition to the Hallet-Mossop mechanism. In the first ice multiplication mechanism ice splinters form by drop freezing and drop-ice collisions. Ice multiplication of this type dominates during developing stage of cloud evolution, when liquid water content is significant. At later stage when clouds become nearly glaciated, ice crystals are produced largely by ice splintering during ice-ice collisions (the second ice multiplication mechanism). Simulations show that droplet size distributions, as well as size distributions of ice particles, agree well with the measurements during ICE-T. Simulations with different cloud condensation nuclei concentrations show the existence of the “optimum” cloud condensation nuclei concentration (or droplet concentration), at which concentration of ice splinters reaches maximum. In these simulations ice nucleation caused by the direct formation of ice crystals upon ice-nucleating particles, as well as the Hallett-Mossop process, has a negligible contribution to the ice crystal concentration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The Brachiopod δ 11 B Record Across the Carboniferous-Permian Climate Transition

In this work, we present the δ 11 B of well-preserved brachiopod fossils coupled with geochemical modeling to examine how seawater boron responded to abrupt and dynamic climate changes in the Late Paleozoic. The Late Carboniferous, a time of major coal formation and glacioeustatic sea level changes, is characterized by relatively stable brachiopod δ11B of 15–17‰, similar to values seen in modern brachiopods. Brachiopod δ 11 B dropped by ~5‰ in the early Permian and then restabilized at a new value of 10‰ within a few million years. Mass balance models of seawater δ 11 B reproduced the overall trends in our brachiopod data but failed to capture the large drop in δ11B in the early Permian. Published seawater 87 Sr/ 86 Sr and δ 44 / 40 Ca data based on brachiopod shells also shift to lower values in the early Permian, suggesting a common control on all three seawater isotope systems. The Permian terrestrial record of evaporites and eolian deposits suggests a prolonged reduced delivery of dissolved weathering products to the ocean, accounting for the change in seawater 87 Sr/ 86 Sr. This reduced weathering, in turn, led to increased atmospheric CO 2 and lowered seawater pH, which may have significantly decreased major removal mechanisms for seawater calcium and boron leading to declines in both isotope systems. We propose that boron removal via coprecipitation in carbonates and adsorption onto clay minerals was significantly diminished due to a reduction in the availability of the borate aqueous species caused by lowered seawater pH.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Experimental Investigation of Hydraulic Fracturing and Stress Sensitivity of Fracture Permeability Under Changing Polyaxial Stress Conditions

Understanding and predicting fracture propagation and subsequent fluid flow characteristics is critical to geoenergy technologies that engineer and/or utilize favorable geological conditions to store or extract fluids from the subsurface. Fracture permeability decreases nonlinearly with increasing normal stress, but the relationship between shear displacement and fracture permeability is less well understood. We utilize the new Geo–Reservoir Experimental Analogue Technology (GREAT cell), which can apply polyaxial stress states and realistic reservoir temperatures and pressures to cylindrical samples and has the unique capability to alter both the magnitude and orientation of the radial stress field by increments of 11.25° during an experiment. We load synthetic analogue materials and real rock samples to stress conditions representative of 500–1,000 m depth, investigate the hydraulic stimulation process, and then conduct flow experiments while changing the fluid pressure and the orientation of the intermediate and minimum principal stresses. High–resolution circumferential strain measurements combined with fluid pressure data indicate fracture propagation can be both stable (no fluid pressure drop) and unstable (fluid pressure drop). The induced fractures exhibit both opening and shear displacements during their creation and/or during fluid flow with changing radial stress states. Flow tests during radial stress field rotation reveal that fracture normal effective stress has first–order control on fracture permeability but increasing fracture offset can lead to elevated permeabilities at maximum shear stress. Here, the results have implications for our conceptual understanding of fracture propagation as well as fluid flow and deformation around fractures.

58 GEOSCIENCES↗
DOE OSTI2021

Potential Chemical Impacts of Subsurface CO 2 : An Integrated Experimental and Numerical Assessment for a Case Study of the Ogallala Aquifer

Leakage from geologic CO 2 sequestration (GCS) reservoirs to overlying underground sources of drinking water (USDW) is a tangible risk. This study is an integrated assessment that combines column experiments and reactive transport simulations of sediments sampled from the Ogallala aquifer above an active commercial-scale GCS site (the Farnsworth Unit in northern Texas). Experimental and simulation results suggest that carbonate mineral (calcite and dolomite) dissolution is the most significant reaction following CO 2 intrusion, and is also the dominant source of trace metal release. Cation exchange is another key mechanism controlling trace metal release by cation interference. Most of the trace metals, including Ba, Sr, As, Pb, and Zn, show a short-term release and quickly drop to the baseline values, suggesting low risk to the overlying USDW quality. Other trace metals, such as Mn and U, exhibit a tangible increase of their concentrations in the beginning, and drop to a higher level compared to the baseline, which may become a potential concern of long-term USDW quality change with CO2introduction. This study provides a comprehensive example of combining laboratory experiments and simulations for assessment of CO 2 -sediment interactions with combined release mechanisms in shallow groundwater aquifers. Data presented here provides useful insights for quantitative risk assessment and effective public education regarding CO 2 geological sequestration, and trace metal reactive transport studies in shallow groundwater aquifers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

What Are the Similarities and Differences in Marine Boundary Layer Cloud and Drizzle Microphysical Properties During the ACE–ENA and MARCUS Field Campaigns?

This study compares macrophysical and microphysical properties of single-layered, liquid-dominant MBL clouds from the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) (above 60°S) and the ARM East North Atlantic (ENA) site during the Aerosol and Cloud Experiments in Eastern North Atlantic (ACE-ENA) field campaign. A total of 1,136 (16.5% of clouds) and 6,034 5-min cloud samples are selected from MARCUS and ARM ENA in this study. MARCUS clouds have higher cloud-top heights, thicker cloud layers, larger liquid water path, and colder cloud temperatures than ENA. Thinner, warmer MBL clouds at ENA can contain higher layer-mean liquid water content due to higher cloud and ocean surface temperatures along with greater precipitable water vapor (PWV). MARCUS has a higher drizzle frequency rate (71.8%) than ENA (45.1%). Retrieved cloud and drizzle microphysical properties from each field campaign show key differences. MARCUS clouds feature smaller cloud droplets, whereas ENA clouds have larger cloud droplets, especially at the upper region of the cloud. From cloud top to cloud base, drizzle drop sizes increase while number concentrations decrease. Drizzle drop radius and number concentration decrease from cloud base to drizzle base due to net evaporation, and MARCUS' lower specific humidity leads to a higher drizzle base than ENA. In conclusion, the broader surface pressure and lower tropospheric stability (LTS) distributions during MARCUS have demonstrated that there are different synoptic patterns for selected cases during MARCUS with less PWV, while ENA is dominated by high pressure systems with nearly doubled PWV.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Convective Vortices and Dust Devils Detected and Characterized by Mars 2020

Abstract We characterize vortex and dust devils (DDs) at Jezero from pressure and winds obtained with the Mars Environmental Dynamics Analyzer (MEDA) instrument on Mars 2020 over 415 Martian days (sols) ( Ls = 6°–213°). Vortices are abundant (4.9 per sol with pressure drops >0.5 Pa correcting from gaps in coverage) and they peak at noon. At least one in every five vortices carries dust, and 75% of all vortices with Δ p > 2.0 Pa are dusty. Seasonal variability was small but DDs were abundant during a dust storm ( Ls = 152°–156°). Vortices are more frequent and intense over terrains with lower thermal inertia favoring high daytime surface‐to‐air temperature gradients. We fit measurements of winds and pressure during DD encounters to models of vortices. We obtain vortex diameters that range from 5 to 135 m with a mean of 20 m, and from the frequency of close encounters we estimate a DD activity of 2.0–3.0 DDs km −2 sol −1 . A comparison of MEDA observations with a Large Eddy Simulation of Jezero at Ls = 45° produces a similar result. Three 100‐m size DDs passed within 30 m of the rover from what we estimate that the activity of DDs with diameters >100 m is 0.1 DDs km −2 sol −1 , implying that dust lifting is dominated by the largest vortices in Jezero. At least one vortex had a central pressure drop of 9.0 Pa and internal winds of 25 ms −1 . The MEDA wind sensors were partially damaged during two DD encounters whose characteristics we elaborate in detail.

Hueso, R.↗