Search NASA⌕ Search

SEARCH · Search NASA

Results for “EARTH ORBIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Simulated Fuel Usage for Drag Compensated Spacecraft in Low Earth Orbit

Atmospheric drag causes the greatest uncertainty in the spacecraft flight dynamics equation for spacecraft in Low Earth Orbit (LEO). The continuously varying atmospheric density levels require increased spacecraft tracking to accurately predict spacecraft location. In addition, periodic propulsive maneuvers must be designed and performed to counteract the effects of drag on the spacecraft orbit. If atmospheric drag effects can be continuously and autonomously counteracted through the use of a drag-free control system, they will essentially be eliminated from the spacecraft flight dynamics equation. The main perturbations on the spacecraft will then be those due to the Earth s gravitational field, which are easily predicted. Although theoretically beneficial from a flight dynamics perspective, the costs associated with drag-free control must be determined and weighed against those benefits before the feasibility of drag-free control of spacecraft in LEO can be determined. Through the use of a MATLAEV Satellite Tool Kit simulation, this paper attempts to quantify one such cost associated with drag-free control: the amount of fuel needed for continuous drag compensation as measured by cumulative orbital velocity changes, or AV. This AV cost can then be compared to the fuel required for more traditional, periodic orbit raising maneuvers of every two to four weeks. The simulation considers various sized spacecraft, as measured by the spacecraft ballistic coefficient, in circular orbits of various altitudes and inclinations. The time between orbit raising maneuvers is allowed to decrease until it approaches near continuous. In this manner, the trend in AV cost can be seen as drag compensation moves from periodic to near continuous.

Fleck, Melissa E.↗

Experimental Tests of UltraFlex Array Designs in Low Earth Orbital and Geosynchronous Charging Environments

The present ground based investigations give the first definitive look describing the expected on-orbit charging behavior of Orion UltraFlex array coupons in the Low Earth Orbital and Geosynchronous Environments. Furthermore, it is important to note that the LEO charging environment also applies to the International Space Station as well as to the lunar mission charging environments. The GEO charging environment includes the bounding case for all lunar orbital and lunar surface mission environments. The UltraFlex thin film photovoltaic array technology has been targeted to become the sole power system for life support and on-orbit power for the manned Aires Crew Exploration Vehicle. It is therefore, crucial to gain an understanding of the complex charging behavior to answer some of the basic performance and survivability issues in an attempt to ascertain that a single UltraFlex array design will be able to cope with the projected worst case LEO and GEO charging environments. Testing was limited to four array coupons, two coupons each from two different array manufactures, Emcore and Spectrolab. The layout of each array design is identical and varies only in the actual cell technology used. The individual array cells from each manufacturer have an antireflection layered coating and come in two different varieties either uncoated (only AR coating) or coated with a thin conducting ITO layer. The LEO Plasma tests revealed that all four coupons passed the arc threshold -120 V bias tests. GEO electron gun charging tests revealed that only front side area of ITO coated coupons passed tests. Only the Emcore AR array passed backside Stage 2 GEO Tests.

Galofaro, Joel T.↗

The BioSentinel Bioanalytical Microsystem: Characterizing DNA Radiation Damage in Living Organisms Beyond Earth Orbit

We will present details and initial lab test results from an integrated bioanalytical microsystem designed to conduct the first biology experiments beyond low Earth orbit (LEO) since Apollo 17 (1972). The 14-kg, 12x24x37-cm BioSentinel spacecraft (Figure 1) assays radiation-responsive yeast in its science payload by measuring DNA double-strand breaks (DSBs) repaired via homologous recombination, a mechanism common to all eukaryotes including humans. S. cerevisiae (brewer's yeast) in 288 microwells are provided with nutrient and optically assayed for growth and metabolism via 3-color absorptimetry monthly during the 18-month mission. BioSentinel is one of several secondary payloads to be deployed by NASA's Exploration Mission 1 (EM-1) launch vehicle into approximately 0.95 AU heliocentric orbit in July 2018; it will communicate with Earth from up to 100 million km.

BioSentinel↗

Optimal aeroassisted return from high earth orbit with plane change

An analytical treatment of the problem of aeroassisted return from a high earth orbit to LEO is presented. The approach taken is that of the minimum fuel aeroassisted return from the higher to the lower orbit with occasional maneuvers within the atmosphere while performing a plane change. The plane changes are calculated for different angular alterations, and a model is developed for optimized atmospheric turning. It is found that larger plane changers demand deeper penetration into the denser regions of the atmosphere, where greater velocity depletion will also occur. Attention is given to lift effects and their optimized solution, and an atmospheric exit condition is characterized which will require one post atmospheric impulse to achieve a LEO of 380 km. Finally, it is shown that application of an impulse will always result in a plane change.

Winh, N. X.↗

Material interactions with the low earth orbital environment Accurate reaction rate measurements

Interactions between spacecraft surfaces and atomic oxygen within the low earth orbital (LEO) environment have been observed and measured during Space Shuttle flights over the past 3 yr. The results of these experiments have demonstrated that interaction rates for many materials proposed for spacecraft applications are high and that protective coatings must be developed to enable long-lived operation of spacecraft structures in the LEO environment. A flight experiment discussed herein uses the Space Shuttle as an orbiting exposure laboratory to obtain accurate reaction rate measurements for materials typically used in spacecraft construction. An ion-neutral mass spectrometer, installed in the Orbiter cargo bay, will measure diurnal ambient oxygen densities while material samples are exposed at low altitude (222 km) to the orbital environment. From in situ atomic oxygen density information and postflight material recession measurements, accurate reaction rates can be derived to update the Space Station materials interaction data base. Additionally, gases evolved from a limited number of material surfaces subjected to direct oxygen impingement will be identified using the mass spectrometer. These measurements will aid in mechanistic definitions of chemical reactions which cause atom-surface interactions and in validating results of upcoming degradation studies conducted in ground-based neutral beam laboratories.

Visentine, J. T.↗

Nickel hydrogen low Earth orbit life testing

A program to demonstrate the long term reliability of NiH2 cells in low Earth orbits (LEO) and support use in mid-altitude orbits (MAO) was initiated. Both 3.5 and 4.5 inch diameter nickel hydrogen cells are included in the test plan. Cells from all U.S. vendors are to be tested. The tests will be performed at -5 and 10 C at 40 and 60% DOD for LEO orbit and 10 C and 80% DOD for MAO orbit simulations. The goals of the testing are 20,000 cycles at 60% DOD and 30,000 cycles at 40% DOD. Cells are presently undergoing acceptance and characterization testing at Naval Weapons Systems Center, Crane.

Badcock, C. C.↗

A real-time guidance algorithm for aerospace plane optimal ascent to low earth orbit

Problems of onboard trajectory optimization and synthesis of suitable guidance laws for ascent to low Earth orbit of an air-breathing, single-stage-to-orbit vehicle are addressed. A multimode propulsion system is assumed which incorporates turbojet, ramjet, Scramjet, and rocket engines. An algorithm for generating fuel-optimal climb profiles is presented. This algorithm results from the application of the minimum principle to a low-order dynamic model that includes angle-of-attack effects and the normal component of thrust. Maximum dynamic pressure and maximum aerodynamic heating rate constraints are considered. Switching conditions are derived which, under appropriate assumptions, govern optimal transition from one propulsion mode to another. A nonlinear transformation technique is employed to derived a feedback controller for tracking the computed trajectory. Numerical results illustrate the nature of the resulting fuel-optimal climb paths.

Calise, A. J.↗

Low-Earth-Orbit (LEO) Life Cycle Evaluation of Nickel-Zinc Batteries

The conclusion of the Low-Earth-Orbit (LEO) life cycle evaluation of nickel-zinc batteries are: that composite nickel electrode provide excellent performance at a reduced weight and lower cost; calcium / zinc electrode minimizes shape change; unioptimized cell designs yield 60 Wh/kg; nickel-zinc delivers 600 cycles at 80% DOD; long cycle life obtainable at low DOD; high rate capability power density; long-term failure mechanism is stack dry; and anomalous overcharge (1120%) greatly affected cell performance but did not induce failure and was recoverable.

Coates, D.↗

An Innovative Method for Low Cost, Autonomous Navigation for Low Earth Orbit Satellites

An innovative approach to autonomous attitude, trajectory, and rate estimation is presented for low earth orbit (LEO) satellites which relies on magnetometers and sun sensors. These two sensors are reliable, inexpensive, and are used routinely in LEO missions for attitude determination and control. An extended Kalman filter (EKF) is developed from two existing systems, one which uses an EKF to estimate attitude and trajectory using magnetometer and gyro data and a second pseudo-linear filter which estimates rotation rate using magnetometer and sun sensor data. The theoretical background of the combined system is presented along with test results from noisy, simulated sensor data.

Deutschmann, Julie↗

Evaluation of a Drag-Free Control Concept for Missions in Low Earth Orbit

Atmospheric drag causes the greatest uncertainty in the equations of motion for spacecraft in Low Earth Orbit (LEO). If atmospheric drag eflects can be continuously and autonomously counteracted through the use of a drag-fee control system, drag may essentially be eliminated from the equations of motion for the spacecraft. The main perturbations on the spacecraft will then be those due to the gravitational field, which are much more easily predicted Through dynamical analysis and numerical simulation, this paper presents some potential costs and benefits associated with the fuel used during continuous drag compensation. In light of this cost-benefit analysis, simulation results are used to validate the concept of drag-free control for LEO spacecraft missions having certain characteristics.

Fleck, Melissa E.↗

International Low-Earth-Orbit Spacecraft Materials Test Program Initiated for Better Prediction of Durability and Performance

Spacecraft in low Earth orbit (LEO) are subjected to many components of the environment, which can cause them to degrade much more rapidly than intended and greatly shorten their functional life. The atomic oxygen, ultraviolet radiation, and cross contamination present in LEO can affect sensitive surfaces such as thermal control paints, multilayer insulation, solar array surfaces, and optical surfaces. The LEO Spacecraft Materials Test (LEO-SMT) program is being conducted to assess the effects of simulated LEO exposure on current spacecraft materials to increase understanding of LEO degradation processes as well as to enable the prediction of in-space performance and durability. Using ground-based simulation facilities to test the durability of materials currently flying in LEO will allow researchers to compare the degradation evidenced in the ground-based facilities with that evidenced on orbit. This will allow refinement of ground laboratory test systems and the development of algorithms to predict the durability and performance of new materials in LEO from ground test results. Accurate predictions based on ground tests could reduce development costs and increase reliability. The wide variety of national and international materials being tested represent materials being functionally used on spacecraft in LEO. The more varied the types of materials tested, the greater the probability that researchers will develop and validate predictive models for spacecraft long-term performance and durability. Organizations that are currently participating in the program are ITT Research Institute (USA), Lockheed Martin (USA), MAP (France), SOREQ Nuclear Research Center (Israel), TNO Institute of Applied Physics (The Netherlands), and UBE Industries, Ltd. (Japan). These represent some of the major suppliers of thermal control and sensor materials currently flying in LEO. The participants provide materials that are exposed to selected levels of atomic oxygen, vacuum ultraviolet radiation, contamination, or synergistic combined environments at the NASA Lewis Research Center. Changes in characteristics that could affect mission performance or lifetime are then measured. These characteristics include changes in mass, solar absorptance, and thermal emittance. The durability of spacecraft materials from U.S. suppliers is then compared with those of materials from other participating countries. Lewis will develop and validate performance and durability prediction models using this ground data and available space data. NASA welcomes the opportunity to consider additional international participants in this program, which should greatly aid future spacecraft designers as they select materials for LEO missions.

Rutledge, Sharon K.↗

Multiprocessor DSP for real-time data processing on Earth orbiting scatterometers

The implementation of a Multi DSP radar signal processor for a Ku-Band Earth orbiting scatterometer is discussed. A testbed has been assembled using a combination of commercial DSP hardware and spaceflight components to evaluate the proposed multiprocessing approaches. Test results of real-time radar echo processing are presented, as well as proposed designs for future investigation.

digital signal processing scatterometer radar↗

Testbed for development of a DSP-based signal processing subsystem for an Earth-orbiting radar scatterometer

A testbed for evaluation of general-purpose digital signal processors in earth-orbiting radar scatterometers is discussed. Because general purpose DSP represents a departure from previous radar signal processing techniques used on scatterometers, there was a need to demonstrate key elements of the system to verify feasibility for potential future scatterometer instruments. Construction of the testbed also facilitated identification of an appropriate software development environment and the skills mix necessary to perform the work.

digitial signal processing↗

STAR Concept for Passive Microwave Temperature Sounding from Middle Earth Orbit (MeoSTAR)

A future mission for a new microwave atmospheric temperature sounder radiometer in a Middle Earth Orbit (MEO) at 11,000 km altitude is described. The MeoSTAR design uses a stationary l-dimensional Synthetic Thinned Array Radiometer in the 50-60 GHz microwave sounding band, to provide a 'pushbroom' image as the satellite orbits. The advantage of this concept is an image with a high spatial resolution and a wide swath with no scanning antenna to disturb the visual and IR sensors on the same satellite.

microwave radiometers↗

Earth orbiting technologies for understanding global change

This paper considers the technology requirements needed to support the Mission to Planet Earth concept, which will consist of several sun synchronous polar platforms; a series of low-earth orbit equatorial missions, such as Space Shuttle payloads, Space-Station-attached payloads, and the Explorer-class Earth Probes; and five geostationary platforms. In particular, the technology requirements in the areas of space-based observation, data/information, and spacecraft operation are examined.

Harris, Leonard A.↗

Comparison of Hyperthermal Ground Laboratory Atomic Oxygen Erosion Yields With Those in Low Earth Orbit

The atomic oxygen erosion yields of 26 materials (all polymers except for pyrolytic graphite) were measured in two directed hyperthermal radio frequency (RF) plasma ashers operating at 30 or 35 kHz with air. The hyperthermal asher results were compared with thermal energy asher results and low Earth orbital (LEO) results from the Materials International Space Station Experiment 2 and 7 (MISSE 2 and 7) flight experiments. The hyperthermal testing was conducted to a significant portion of the atomic oxygen fluence similar polymers were exposed to during the MISSE 2 and 7 missions. Comparison of the hyperthermal asher prediction of LEO erosion yields with thermal energy asher erosion yields indicates that except for the fluorocarbon polymers of PTFE and FEP, the hyperthermal energy ashers are a much more reliable predictor of LEO erosion yield than thermal energy asher testing, by a factor of four.

Flight tests↗