Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Effects of Surface Treatments on Secondary Electron Emission from CVD Diamond Films

Secondary electron emission (SEE) properties of polycrystalline diamond films grown by chemical vapor deposition (CVD) were measured. The total secondary yield (sigma) from as-grown samples was observed to be as high as 20 at room temperature and 48 while heating at 700 K in vacuum. Electron-beam-activated, alkali-terminated diamond films have shown stable values of sigma as high as 60 when coated with CsI and similarly high values when coated with other alkali halides. Diamond coated with BaF2 had a stable sigma of 6, but no enhancement of the SEE properties was observed with coatings of Ti or Au. Hydrogen was identified to give rise to this effect in as-grown films. However, electron beam exposure led to a reduction in sigma values as low as 2. Exposure to a molecular hydrogen environment restored sigma to its original value after degradation, and enabled stable secondary emission during electron beam exposure. Atomic hydrogen and hydrogen plasma treatments were performed on diamond/Mo samples in an attempt to increase the near-surface hydrogen concentration which might lead to increased stability in the secondary emission. Raman scattering analysis, scanning electron microscopy, and Auger electron spectroscopy (AES) confirmed that hydrogen plasma and atomic hydrogen treatments improved the quality of the CVD diamond significantly. Elastic recoil detection (ERD) showed that heating as-grown diamond targets to 7OO K, which was correlated with an increase in sigma, removed contaminants from the surface but did not drive hydrogen from the diamond bulk. ERD showed that the hydrogen plasma treatment produced an increase in the hydrogen concentration in the near-surface region which did not decrease while heating in vacuum at 700 K, but no improvement in the SEE properties was observed.

Mearini, G. T.↗
NASA NTRS2003

Dynamic Mechanical Characterization of Thin Film Polymer Nanocomposites

Many new materials are being produced for aerospace applications with the objective of maximizing certain ideal properties without sacrificing others. Polymer composites in various forms and configurations are being developed in an effort to provide lighter weight construction and better thermal and electrical properties and still maintain adequate strength and stability. To this end, thin film polymer nanocomposites, synthesized for the purpose of influencing electrical conductivity using metal oxide particles as filler without incurring losses in mechanical properties, were examined to determine elastic modulus and degree of dispersion of particles. The effects of various metal oxides on these properties will be discussed.

Herring, Helen M.↗
NASA NTRS1973

Space Shuttle response to atmospheric turbulence.

A fully reusable Space Shuttle configuration has been analyzed during ascent flight to determine its response to atmospheric turbulence. Propellant sloshing, gust penetration, and automatic control system effects were included. The steady-state aerodynamic method of Woodward was used to derive the generalized aerodynamic forces, using the standard quasi-steady assumption. Aerodynamic interference effects between adjacent wings and bodies were found to be significant, with symmetric responses generally higher than antisymmetric. The stability augmentation system tended to lower booster response while increasing orbiter response. Loads due to 9 m/s quasi-square-wave gusts were considerably higher than the 3 sigma random turbulence loads. The elastic portion of the response accounted for about 15% of the total wing load in the discrete gust analysis, while in the random case the elastic effect was small.

Huntington, R. G.↗
NASA NTRS1984

High precision measurements in crustal dynamic studies

The development of high-precision instrumentation for monitoring benchmark stability and evaluating coseismic strain and tilt signals is reviewed. Laser strainmeter and tilt observations are presented. Examples of coseismic deformation in several geographic locations are given. Evidence suggests that the Earth undergoes elastic response to abrupt faulting.

Wyatt, F.↗
NASA NTRS1983

Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition

A program was performed to identify and evaluate a variety of candidate rotor hub configurations for the ITR/FRR. Design criteria were established for the development of the hub concepts. Five initial hub configurations were examined and two were selected for further refinement and evaluation. The selected configurations were bearingless designs. The Classic Elastic Pitch Beam (CEPB) and the Plain Elastic Pitch Beam (PEPB), both exhibit superior qualities for the criteria in the final evalution. The CEPB is favored over the PEPB primarily because it offers better capability for built in damping for stability and is judged to have a lower risk in development.

Howes, H. E.↗
NASA NTRS1990

Dissipative compensators for flexible spacecraft control

The problem of controller design for flexible spacecraft is addressed. Model-based compensators, which rely on the knowledge of the system parameters to tune the state estimator, are considered. The instability mechanisms resulting from high sensitivity to parameter uncertainties are investigated. Dissipative controllers, which use collocated actuators and sensors, are also considered, and the robustness properties of constant-gain dissipative controllers in the presence of unmodeled elastic-mode dynamics, sensor/actuator nonlinearities, and actuator dynamics are summarized. In order to improve the performance without sacrificing robustness, a class of dissipative dynamic compensators is proposed and is shown to retain robust stability in the presence of second-order actuator dynamics if acceleration feedback is employed. A class of dissipative dynamic controllers is proposed which consists of a low-authority, constant-gain controller and a high-authority dynamic compensator. A procedure for designing an optimal dissipative dynamic compensator is given which minimizes a quadratic performance criterion. Such compensators offer the promise of better performance while still retaining robust stability.

Joshi, S. M.↗
NASA NTRS1939

Torsional Stability of Aluminum Alloy Seamless Tubing

Torsion tests were made on 51ST aluminum-alloy seamless tubes having diameter-to-thickness ratios of from 77 to 139 and length-to-diameter ratios of from 1 to 60. The torsional strengths developed in the tubes which failed elastically (all tubes having lengths greater than 2 to 6 times the diameter) were in most cases within 10 percent of the value indicated by the theories of Donnel, Timoshenko, and Sturm, assuming a condition of simply supported ends.

Moore, R L↗
NASA NTRS2006

Time-dependent strains and stresses in a pumpkin balloon

This paper presents a study of pumpkin-shaped superpressure balloons, consisting of gores made from a thin polymeric film attached to high stiffness, meridional tendons. This type of design is being used for the NASA ULDB balloons. The gore film shows considerable time-dependent stress relaxation, whereas the behaviour of the tendons is essentially time-independent. Upon inflation and pressurization, the "instantaneous", i.e. linear-elastic strain and stress distribution in the film show significantly higher values in the meridional direction. However, over time, and due to the biaxial visco-elastic stress relaxation of the the material, the hoop strains increase and the meridional stresses decrease, whereas the remaining strain and stress components remain substantially unchanged. These results are important for a correct assessment of the structural integrity of a pumpkin balloon in a long-duration mission, both in terms of the material performance and the overall stability of the shape of the balloon. An experimental investigation of the time dependence of the biaxial strain distribution in the film of a 4 m diameter, 48 gore pumpkin balloon is presented. The inflated shape of selected gores has been measured using photogrammetry and the time variation in strain components at some particular points of these gores has been measured under constant pressure and temperature. The results show good correlation with a numerical study, using the ABAQUS finite-element package, that includes a widely used model of the visco-elastic response of the gore material:

Gerngross, T.↗
NASA NTRS1981

On the geodetic stability of the Goddard Optical Research Facility

Seismic observations of earthquakes and blasts, geologic analysis of Landsat images, and a search of the historical record was examined. However, no evidence for tectonic motion was found. Some faulting is present in the area but no evidence of seismic activity was found. No elastic resonances in the range from 0.3 to 15 Hz were found. It is concluded that, except for ground water induced changes, the facility is stable at least to the 0.5 cm level.

Webster, W. J., Jr.↗
NASA NTRS1983

On the solution of elastic-plastic static and dynamic postbuckling collapse of general structure

Many investigations have considered structural collapse from strictly the transient point of view. While such an approach is ideally correct, certain difficulties have to be overcome in its implementation. The present investigation is concerned with the development of self-adaptive algorithms which make it possible to conduct the analysis of both static elastic and elastic-plastic postbuckling, as well as static loading to the onset of buckling followed by subsequent dynamic postbuckling. The approach employed to solve the static portion of loading is to extend the constrained Incremental Newton-Raphson (INR) algorithm by incorporating elastic-plastic constitutive characterizations. Large deformation moderate strain theory is adopted to establish the overall strategy. Attention is given to governing field equations, aspects of algorithmic development, and numerical experiments conducted to illustrate the efficiency and stability of the developed schemes.

Padovan, J.↗
NASA NTRS1989

Three-dimensional aspects of plasticity-induced fatigue crack closure

A three-dimensional elastoplastic finite element analysis of fatigue crack growth and closure in a center-crack tension specimen was performed in order to investigate the crack opening stress as a function of specimen thickness under constant amplitude loading conditions. Elastic-perfectly plastic conditions were assumed and cycle loading was kept at R = 0.1. Firstly, by imposing proper boundary conditions on the three-dimensional model, a plane strain analysis was carried out. The ratio of stabilized opening stress over the maximum applied stress under plane strain conditions was found to be 0.28. Secondly, the model thickness was varied under fully three-dimensional conditions, and crack-opening stresses were determined for each specimen thickness. The crack-opening stress is found to vary through the thickness for the center crack tension specimen. On the specimen surface and in the midplane the crack-opening stress levels tend to two-dimensional solutions for plane stress and plane strain conditions, respectively.

Chermahini, R. G.↗
NASA NTRS1990

The behavior of elastic anisotropic laminated composite flat structures subjected to deterministic and random loadings

Within this research project, the following topics were studied: (1) foundation of the refined theory of flat cross-ply laminated composite flat and curved panels as well as their static and dynamic response analysis; (2) foundation of a geometrically-nonlinear shear-deformable theory of composite laminated flat panels including the effect of initial geometric imperfections and its application in the postbuckling analysis; (3) the study of the dynamic response of shear deformable elastic laminated composite panels to deterministic time-dependent external excitations as the sonic boom and explosive blast type-loadings; (4) the study of the dynamic response of shear deformable elastic laminated composite panels to random excitation as e.g. the one produced by a jet noise or by any time-dependent external excitation whose characteristics are expressed in a statistical sense; and (5) the dynamic stability of fiber-reinforced composite flat panels whose materials (due to e.g. an ambient high temperature field) exhibit a time-dependent physical behavior.

Librescu, Liviu↗
NASA NTRS1983

Stability, vibration and passive damping of partially restrained imperfect columns

A theoretical and experimental study of slender tubular columns for possible use in space structures is conducted in the presence of partial rotational end restraints. Explicit formulas are derived for computing the buckling load and the lowest natural frequency of perfectly straight uniform elastic members with rotational end restraints possessing linear moment-rotation characteristics. An exact solution in the form of a transcendental equation, and a numerical solution using second-order finite-differences are also presented. The presence of an initial imperfection is also incorporated into the numerical procedure. Vibration tests are conducted on an imperfect tubular steel member in the absence of an axial load. A damping concept consisting of a string-mass assembly is explored. Three passive damping configurations involving combinations of three lead shots were investigated. The three lead shot configurations provided considerably greater damping than the single lead shot.

Razzaq, Z.↗
NASA NTRS1984

Interactive aircraft flight control and aeroelastic stabilization

An analytical model has been used to study the problem of integrated control system/structural dynamic design. This model utilizes the traditional typical section lifting surface with a control surface attached in 2-D unsteady incompressible flow. The studies have as their purpose the examination of the use of the location of the elastic axis of the airfoil as a design variable in the search for an actively controlled configuration that has a specified flutter margin. Items of interest include the determination of flutter speed and divergence speed as functions of a nondimensional parameter, a sub c, that measures the location (in semi-chords) of the elastic axis with respect to the airfoil midchord. All other parameters are fixed. The behavior of velocity root locus curves with changes in a sub c is illustrated. Also shown is an example of the use of sensitivity derivatives to reposition poles of the open loop system. The behavior of the actively controlled or closed loop system is also discussed. A set of examples are presented to indicate how the shear center parameter, a sub c, affects the design of the controlled system.

Weisshaar, T. A.↗
NASA NTRS1923

On the stability of oscillations of an airplane wing

During a flight with a Van Berkel W. B. seaplane it was observed that the wing could perform violent oscillations. A theoretical and experimental investigation led to the conclusion, that in some cases an unstable oscillation of the wing-aileron system under the influence of the elastic and aerodynamic forces is possible without further external causes.

FLUTTER - WINGS - VAN BERKEL W B↗
NASA NTRS1986

Resilience: Concepts and Measures

Inertia, the resistance of an ecosystem property to change under stress, is distinguished from resilience, which refers to the degree, manner. and pace of change or recovery in ecosystem properties following disturbance. In turn, these two terms are differentiated from 'stability'. which is used here to refer to the pattern of natural fluctuation in ecosystem properties in the absence of major exogenous disturbance. Four component attributes of resilience are reviewed in the context of Mediterranean-climate examples. The elasticity component concerns the rate of recovery of an ecosystem property following disturbance; amplitude, the threshold of stress beyond which recovery to the initial state does not occur; hysteresis, the degree to which the pattern of recovery after stress differs from that of deterioration under chronic stress, and malleability the ease with which the ecosystem can become permanently altered. Each ecosystem property will typically reveal a different level of resilience to a given stress and stressor. The degree of recovery should not be expected to be complete in any event, due to sample variability and stochastic events. In cyclicallystable ecosystems, the pattern of recovery should be measured in light of this periodicity, and short-term (within-cycle) recovery distinguished from long-term (between-cycle) recovery. The prediction of resilience properties of ecosystems can be approached through a knowledge of the modular structure of foodwebs, through knowledge of the autecological adaptations of key species to the stressor, or through cumulative experience of the response to disturbance at the community level. At present there is much room for investigation of each of these approaches in Mediterranean-climate ecosystems.

Westman, Walter E.↗
NASA NTRS1986

Robust multivariable controller design for flexible spacecraft

Large, flexible spacecraft are typically characterized by a large number of significant elastic modes with very small inherent damping, low, closely spaced natural frequencies, and the lack of accurate knowledge of the structural parameters. Summarized here is some recent research on the design of robust controllers for such spacecraft, which will maintain stability, and possible performance, despite these problems. Two types of controllers are considered, the first being the linear-quadratic-Gaussian-(LQG)-type. The second type utilizes output feedback using collocated sensors and actuators. The problem of designing robust LQG-type controllers using the frequency domain loop transfer recovery (LTR) method is considered, and the method is applied to a large antenna model. Analytical results regarding the regions of stability for LQG-type controllers in the presence of actuator nonlinearities are also presented. The results obtained for the large antenna indicate that the LQG/LTR method is a promising approach for control system design for flexible spacecraft. For the second type of controllers (collocated controllers), it is proved that the stability is maintained in the presence of certain commonly encountered nonlinearities and first-order actuator dynamics. These results indicate that collocated controllers are good candidates for robust control in situations where model errors are large.

Joshi, Suresh M.↗
NASA NTRS2003

Alumina-Reinforced Zirconia Composites

Alumina-reinforced zirconia composites, used as electrolyte materials for solid oxide fuel cells, were fabricated by hot pressing 10 mol percent yttria-stabilized zirconia (10-YSZ) reinforced with two different forms of alumina particulates and platelets each containing 0 to 30 mol percent alumina. Major mechanical and physical properties of both particulate and platelet composites including flexure strength, fracture toughness, slow crack growth, elastic modulus, density, Vickers microhardness, thermal conductivity, and microstructures were determined as a function of alumina content either at 25 C or at both 25 and 1000 C. Flexure strength and fracture toughness at 1000 C were maximized with 30 particulate and 30 mol percent platelet composites, respectively, while resistance to slow crack growth at 1000 C in air was greater for 30 mol percent platelet composite than for 30 mol percent particulate composites.

Choi, Sung R.↗