Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Effects of Strain Rate and Surface Finish on Tensile Properties in High Pressure Hydrogen — A Case Study for LP-DED NASA HR-1

NASA has advanced NASA HR-1 as a solution for liquid rocket engine components that operate in hydrogen rich environments using various AM techniques. The NASA HR-1 for AM applications was specifically formulated for high ductility in high pressure gaseous hydrogen environment in addition to high strength and low cycle fatigue (LCF) resistance. NASA HR-1 meets materials requirements for liquid rocket engine components, including good hydrogen resistance, high conductivity, good LCF performance, and high elongation and strength for components in medium heat flux environments. NASA has completed fabrication of several subscale and full-scale channel wall nozzles in LP-DED NASA HR-1 and completed hot-fire testing. This includes refinement of the process to produce thin-walls and various channel geometries to meet the requirements for channel wall nozzle applications. The main objective of this investigation is to better understand the effects of tensile test strain rate and specimen surface finish on the amount of tensile ductility degradation in high pressure gaseous hydrogen environments. Performing smooth tensile tests in high pressure hydrogen and nitrogen environments can serve as a rapid and economical screening method to determine the relative susceptibility of materials to HEE. This paper presents the tensile test results for LP-DED NASA HR-1 in hydrogen and details the material evaluation on the effects of strain rate and surface finish condition on surface cracking behavior and fracture characteristics. The resistance to HEE for LP-DED NASA HR-1 and the wrought alloy is compared under the same testing conditions. Loss of tensile ductility is quantified in terms of changes in elongation at failure in hydrogen to compare HEE susceptibility. The most suitable strain rate and specimen surface finish condition for future HEE screening testing at MSFC are recommended.

Additive manufacturing↗
NASA NTRSDate not supplied

A Dominant Arabidopsis Thaliana ACTIN7 Mutant for Studies of Cytoskeletal-Mediated Root Gravity and Spaceflight Stress Responses

A forward genetic screen for Arabidopsis thaliana mutants that exhibited differential sensitivity to the actin-disrupting compound, latrunculin B (LatB), was conducted to uncover new players involved in actin-mediated root gravity responses. This to the isolation of a mutant that exhibited robust primary root growth at 100 nM LatB, which is a concentration that severely inhibits wild-type root elongation. Phenotypic analysis revealed that hypocotyl elongation in the dark and root hair tip growth in the mutant could tolerate LatB concentrations that impaired these processes in wild type. A cross between the mutant and wild type resulted in progeny resistance to LatB, which indicated that the mutant is dominant (hereafter referred to as LBR1 for LatB Resistant1). Filamentous-actin (F-actin) organization in LBR1 primary roots remained intact at 100 nM LatB, while that of wild type exhibited fragmented F-actin. Next generation sequencing revealed that LBR1 had a single nucleotide polymorphism (SNP) in the AT5G09810 gene that changed cytosine to a thiamine at the first exon. AT5G09810 encodes ACTIN7 (ACT7), which is one of three vegetative actin isoforms in A. thaliana. The SNP in the ACT7 gene led to a change in a single amino acid from proline at position 32 to a serine. Transgenic complementation of LBR1 plants with wild-type ACT7 under the control of the ACT7 promoter (pACT7:ACT7) and wild-type plants with LBR1, which contained the proline to serine mutation, also under the ACT7 promoter (pACT7:LBR1) confirmed that LBR1 is ACT7. The pACT7:LBR1 construct was also able to confer LatB resistance to the act7-5 and act2-3 vegetative ACT mutants. Moreover, LBR1 exhibited partial tolerance to salt and low phosphate, and enhanced root skewing on a clinostat, suggesting that site-directed engineering of vegetative ACT presents a strategy for generating stress-tolerant plants for spaceflight applications and studies of actin-mediated gravity responses.

Plant Space Biology↗
NASA NTRSDate not supplied

Microstructure and Mechanical Properties of Additively Manufactured Haynes 282: A Comparative Analysis between L-PBF and LP-DED Technologies

This study compares the microstructure and tensile properties of Haynes 282 fabricated using laser powder bed fusion and laser powder directed energy deposition. Both sets underwent stress-relieving, followed by hot isostatic pressing, and the standard double aging heat treatment. Tensile testing was conducted at room temperature on specimens fabricated with both technologies to evaluate and compare their tensile behaviors. Results show that the ultimate tensile and yield strengths of laser powder bed fused specimens were 18% and 57% higher, respectively than those of laser powder directed energy deposited ones, whereas the elongation to failure was similar in both. The difference in strengths is attributed to the differences in the size of ɣ' precipitates and grains, i.e., those in the LP-DED specimens being larger, whereas similar elongation to failure is attributed to the carbide debonding dominating the fracture mechanism in both batches.

Additive manufacturing↗
NASA NTRS2024

3D Scanning System to Assess Gravity-Dependent Body Shape Changes

The human body shows unique physiological and morphological changes when exposed to different gravity conditions, including muscle atrophy, fluid shift, spinal elongation, and body posture adjustments. Such changes need to be incorporated for human-system integration in the vehicle habitat, garment, and spacesuit designs, as inaccurate body measurements can result in suboptimal crew protection that can potentially decrease injury tolerance. However, the traditional linear measurements, such as stature, segment lengths or circumferences measured using a caliper or tape measure, often show limited consistency and are unable to capture the nonlinear characteristics of the human body. While 3D body scanning can provide significant advantages over linear measurements, the technologies have not been fully developed or customized for in-flight scanning. For ground laboratory use, several different scanner types are commercially available. However, in-flight scanning requires additional technical considerations, such as minimal scan time, simplified calibration, and sufficient capture volume. This work aims to develop a prototype 3-D body scanning system that is customized for in-flight use to scan crewmembers, with the configuration and performance optimized for detecting known gravity-dependent body shape and posture changes. A hardware system will be custom built using a network of commercial off-the-shelf 3D sensors. The sensor parameters and settings will be optimized to detect the targeted body shape changes, specifically using body manikins of which the shape and size are iteratively permuted to simulate the known changes by fluid shift and spinal elongation. The capture volume will be also matched for a range of body sizes from a 1st percentile female to 99th percentile male. Unintentional body motions or floating in microgravity will be also simulated and incorporated. A data acquisition software will be developed for efficient in-flight operations with minimal overhead and easy-to-use user interface. A simplified calibration procedure will be designed for robust scanning against frequent vibration or unexpected sensor position shifts. The system will be tested in the ground laboratory for accuracy and reliability against a reference scanning system. New anthropometry measurements will be also identified to sensitively capture the gravity dependent body shape changes, in addition to the traditional anthropometry measurements. A novel landmark-based technique will be tested for consistent anthropometry measurements across posture variations. If successfully developed and deployed, the new system is expected to provide previously unavailable body shape and size data from different gravitational environments, including 0-g, 1/6-g, and 1-g. Such data can improve suit fit, habitat design, exercise efficacy quantification and sizing of orthostatic intolerance garments.

K H Kim↗
NASA NTRSDate not supplied

A Dominant Arabidopsis Thaliana ACTIN7 Mutant for Studies of Cytoskeletal-Mediated Root Gravity and Spaceflight Stress Responses

A forward genetic screen for Arabidopsis thaliana mutants that exhibited differential sensitivity to the actin-disrupting compound, latrunculin B (LatB), was conducted to uncover new players involved in actin-mediated root gravity responses. This led to the isolation of a mutant that exhibited robust primary root growth at 100 nM LatB, which is a concentration that severely inhibits wild-type root elongation. Phenotypic analysis revealed that hypocotyl elongation in the dark and root hair tip growth in the mutant could tolerate LatB concentrations that impaired these processes in wild type. A cross between the mutant and wild type resulted in progeny resistance to LatB, which indicated that the mutant is dominant (hereafter referred to as LBR1 for LatB Resistant1). Filamentous-actin (F-actin) organization in LBR1 primary roots remained intact at 100 nM LatB, while that of wild type exhibited fragmented F-actin. Next generation sequencing revealed that LBR1 had a single nucleotide polymorphism (SNP) in the AT5G09810 gene that changed cytosine to a thiamine at the first exon. AT5G09810 encodes ACTIN7 (ACT7), which is one of three vegetative actin isoforms in A. thaliana. The SNP in the ACT7 gene led to a change in a single amino acid from proline at position 32 to a serine. Transgenic complementation of LBR1 plants with wild-type ACT7 under the control of the ACT7 promoter (pACT7:ACT7) and wild-type plants with LBR1, which contained the proline to serine mutation, also under the ACT7 promoter (pACT7:LBR1) confirmed that LBR1 is ACT7. The pACT7:LBR1 construct was also able to confer LatB resistance to the act7-5 and act2-3 vegetative ACT mutants. Moreover, LBR1 exhibited partial tolerance to salt and low phosphate, and enhanced root skewing on a clinostat, suggesting that site-directed engineering of vegetative ACT presents a strategy for generating stress-tolerant plants for spaceflight applications and studies of actin-mediated gravity responses.

Plant Space Biology↗
NASA NTRS2024

3D Scanning System to Assess Gravity-Dependent Body Shape Changes

The human body shows unique physiological and morphological changes when exposed to different gravity conditions, including muscle atrophy, fluid shift, spinal elongation, and body posture adjustments. Such changes need to be incorporated for human-system integration in the vehicle habitat, garment, and spacesuit designs, as inaccurate body measurements can result in suboptimal crew protection that can potentially decrease injury tolerance. However, the traditional linear measurements, such as stature, segment lengths or circumferences measured using a caliper or tape measure, often show limited consistency and are unable to capture the nonlinear characteristics of the human body. While 3D body scanning can provide significant advantages over linear measurements, the technologies have not been fully developed or customized for in-flight scanning. For ground laboratory use, several different scanner types are commercially available. However, in-flight scanning requires additional technical considerations, such as minimal scan time, simplified calibration, and sufficient capture volume. This work aims to develop a prototype 3-D body scanning system that is customized for in-flight use to scan crewmembers, with the configuration and performance optimized for detecting known gravity-dependent body shape and posture changes. A hardware system will be custom built using a network of commercial off-the-shelf 3D sensors. The sensor parameters and settings will be optimized to detect the targeted body shape changes, specifically using body manikins of which the shape and size are iteratively permuted to simulate the known changes by fluid shift and spinal elongation. The capture volume will be also matched for a range of body sizes from a 1st percentile female to 99th percentile male. Unintentional body motions or floating in microgravity will be also simulated and incorporated. A data acquisition software will be developed for efficient in-flight operations with minimal overhead and easy-to-use user interface. A simplified calibration procedure will be designed for robust scanning against frequent vibration or unexpected sensor position shifts. The system will be tested in the ground laboratory for accuracy and reliability against a reference scanning system. New anthropometry measurements will be also identified to sensitively capture the gravity dependent body shape changes, in addition to the traditional anthropometry measurements. A novel landmark-based technique will be tested for consistent anthropometry measurements across posture variations. If successfully developed and deployed, the new system is expected to provide previously unavailable body shape and size data from different gravitational environments, including 0-g, 1/6-g, and 1-g. Such data can improve suit fit, habitat design, exercise efficacy quantification and sizing of orthostatic intolerance garments.

K H Kim↗
NASA NTRSDate not supplied

Satellite Tracking of Shallow Cumulus during CAMP2Ex: The Aerosol and Organization Connection

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Shallow clouds come in many forms, from scattered, short-lived cumulus to organized features that include cold pool boundaries and lines reaching O(100 km) scale lasting several hours. In this study, we explore how cloud morphology and environmental aerosol affect shallow cumulus lifecycle properties. Measuring such influences requires a broad, detailed view of these cloud fields as they grow and decay. Geostationary satellites provide a means to follow the clouds with enhanced spatiotemporal sampling from space. We apply a cloud-tracking tool to study lifecycle properties of shallow cumulus sampled during the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2Ex) field campaign of 2019. The mission conducted airborne and shipborne operations over the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. We segment shallow cumulus on AHI 0.5-km visible reflectance during the daylit hours of several research flights that exhibited ideal atmospheric conditions for tracking. We collect the resulting cloud tracks by regions containing airborne sampling of the cloud environments and by two specific segmentation techniques: one optimized for small, disorganized cumulus and the other for larger, organized clouds using suitable thresholds for reflectance and blurring. We present an analysis of cloud lifecycle properties using our dual segmentation approach for various sampled environments of CAMP2Ex. A total of 7 research flights (RFs) exhibited ideal conditions for generating cloud-track ensembles under similar thermodynamic and kinematic profiles but with varying aerosol load. We consider lifetime, track-achieved metrics, and ensemble-fitted growth rates to evaluate the aerosol effect. Cloud elongation, a factor in cloud morphology, is also considered for any potential influence in observed shifts in growth rates. The results suggest that aerosol affects cloud lifecycles more significantly for clouds with larger areas and independent of the elongation factor.

Cloud Tracking↗
NASA NTRS2003

Inferring the palaeoenvironment of ancient bacteria on the basis of resurrected proteins

Features of the physical environment surrounding an ancestral organism can be inferred by reconstructing sequences of ancient proteins made by those organisms, resurrecting these proteins in the laboratory, and measuring their properties. Here, we resurrect candidate sequences for elongation factors of the Tu family (EF-Tu) found at ancient nodes in the bacterial evolutionary tree, and measure their activities as a function of temperature. The ancient EF-Tu proteins have temperature optima of 55-65 degrees C. This value seems to be robust with respect to uncertainties in the ancestral reconstruction. This suggests that the ancient bacteria that hosted these particular genes were thermophiles, and neither hyperthermophiles nor mesophiles. This conclusion can be compared and contrasted with inferences drawn from an analysis of the lengths of branches in trees joining proteins from contemporary bacteria, the distribution of thermophily in derived bacterial lineages, the inferred G + C content of ancient ribosomal RNA, and the geological record combined with assumptions concerning molecular clocks. The study illustrates the use of experimental palaeobiochemistry and assumptions about deep phylogenetic relationships between bacteria to explore the character of ancient life.

Bacteria/classification/metabolism↗
NASA NTRS1999

Oligomerization of L-gamma-carboxyglutamic acid

Unlike glutamic acid, L-gamma-carboxyglutamic acid does not oligomerize efficiently when treated with carbonyldiimidazole in aqueous solution. However, divalent ions such as Mg2+ catalyze the reaction, and lead to the formation of oligomers in good yield. In the presence of hydroxylapatite, L-gamma-carboxyglutamic acid oligomerizes efficiently in a reaction that proceeds in the absence of divalent ions but is further catalyzed when they are present. After 'feeding' 50 times with activated amino acid in the presence of the Mg2+ ion, oligomers longer than the 20-mer could be detected. The effect of hydroxylapatite on peptide elongation is very sensitive to the nature of the activated amino acid and the acceptor peptide. Glutamic acid oligomerizes more efficiently than L-gamma-carboxyglutamic acid on hydroxylapatite and adds more efficiently to decaglutamic acid in solution. One might, therefore, expect that glutamic acid would add more efficiently than L-gamma-carboxyglutamic acid to decaglutamic acid on hydroxylapatite. The contrary is true--the addition of L-gamma-carboxyglutamic acid is substantially more efficient. This suggests that oligomerization on the surface of hydroxylapatite depends on the detailed match between the structure of the surface of the mineral and the structure of the oligomer.

Non-NASA Center↗
NASA NTRS1962

On the Long-Period Effects in the Motion of an Artificial Satellite Caused by the Ellipticity of the Equator of the Earth

If a satellite has a mean daily motion nearly commensurable with the angular velocity of rotation of the earth, long-period perturbations will influence its motion. The eccentricity of such a commensurable orbit is not necessarily small, as the orbit of Explorer VI shows. This circumstance caused the author to develop a semianalytical method of treating these perturbations, which avoids the development of the disturbing function into powers of the eccentricity and consequently includes the cases of elongated orbits and orbits with moderate eccentricities.

MOTION↗
NASA NTRS1966

Polymer deformation gage measures thickness change in tensile tests

Lightweight deformation gage attached to a polymer specimen determines the thickness changes undergone by the specimen during the testing of its tensile and elongation properties. Mechanical noise from outside sources is dampened when the assembly is hung on a light rubber band.

Broyles, H. F.↗
NASA NTRS1964

Zodiacal light Summary report

Survey in form of tables and graphs of surface brightness and degree of polarization of zodiacal light as function of elongation in plane of elliptic - related bibliography

TABLE↗