Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ensemble Impacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Development and experimental evaluation of new building air leakage measurement methods: measurement of interior air leaks and comparison to conventional methods

Building air leaks (both through exterior and interior surfaces) can have a significant impact on energy consumption, indoor air quality, fire safety, and moisture accumulation affecting structural durability. Blower door testing has been used to measure leaks in buildings, but commonly used testing methods do not directly measure interior leaks. In this paper, new testing methods (guarded interior test and zonal multipoint pressure testing method) are presented that directly measure these interior leaks, utilizing common blower door equipment for both single and multi-point testing. Furthermore, these new methods are compared to conventional methods in terms of the information provided, limitations and time/effort needed. In addition, building leak measurement results are analyzed to reveal a) coupling between power law model values (exponent and coefficient) for an ensemble of buildings, b) the error in using single point testing when estimating low pressure leakage, and c) how building power law models vary from low to high pressure ranges.

99 GENERAL AND MISCELLANEOUS↗

Numerical Mixing Suppresses Submesoscale Baroclinic Instabilities Over Sloping Bathymetry

Abstract The impacts of spurious numerical salinity mixing on the larger‐scale flow and tracer fields are characterized using idealized simulations. The idealized model is motivated by realistic simulations of the Texas‐Louisiana shelf and features oscillatory near‐inertial wind forcing. can exceed the physical mixing from the turbulence closure in frontal zones and within the mixed layer. This suggests that simulated mixing processes in frontal zones are driven largely by . Near‐inertial alongshore wind stress amplitude is varied to identify a base case that maximizes the ratio of to in simulations with no prescribed horizontal mixing. We then test the sensitivity of the base case with three tracer advection schemes (MPDATA, U3HC4, and HSIMT) and conduct ensemble runs with perturbed bathymetry. Instability growth is evaluated using the volume‐integrated eddy kinetic energy and available potential energy . While all schemes have similar total mixing, the HSIMT simulations have over double the volume‐integrated and 20% less relative to other schemes, which suppresses the release of and reduces the by roughly 25%. This results in reduced isohaline variability and steeper isopycnals, evidence that enhanced suppresses instability growth. Differences in and between the MPDATA and U3HC4 simulations are marginal. However, the U3HC4 simulations have 25% more . Experiments with variable horizontal viscosity and diffusivity coefficients show that small amounts of prescribed horizontal mixing improve the representation of the ocean state for all advection schemes by reducing the and increasing the .

54 ENVIRONMENTAL SCIENCES↗

Global burned area increasingly explained by climate change

Fire behaviour is changing in many regions worldwide. However, nonlinear interactions between fire weather, fuel, land use, management and ignitions have impeded formal attribution of global burned area changes. Here, in this work, we demonstrate that climate change increasingly explains regional burned area patterns, using an ensemble of global fire models. The simulations show that climate change increased global burned area by 15.8% (95% confidence interval (CI) [13.1–18.7]) for 2003–2019 and increased the probability of experiencing months with above-average global burned area by 22% (95% CI [18–26]). In contrast, other human forcings contributed to lowering burned area by 19.1% (95% CI [21.9–15.8]) over the same period. Moreover, the contribution of climate change to burned area increased by 0.22% (95% CI [0.22–0.24]) per year globally, with the largest increase in central Australia. Our results highlight the importance of immediate, drastic and sustained GHG emission reductions along with landscape and fire management strategies to stabilize fire impacts on lives, livelihoods and ecosystems.

54 ENVIRONMENTAL SCIENCES↗

STOCHASTIC OPTIMAL POWER FLOW FOR REAL-TIME MANAGEMENT OF DISTRIBUTED RENEWABLE GENERATION AND DEMAND RESPONSE (Final Report)

To meet the grand challenge of a sustainable energy future, there has been a surge of interest in renewable energy. Today, the uncertainty associated with renewable resources is handled by using operating reserves. The high penetration of renewable resources, however, introduces difficult-to-control dynamics and challenges for power system operation. Decision support tools are necessary at the bulk system operational level to recognize and efficiently utilize renewable resources and distributed demand response products in concert with traditional grid resources. It is envisaged that responsive load can potentially have very significant cost advantages over either spinning or non-spinning ramping reserve. Critical decisions are made during hour(s)-ahead and real-time power system operation regarding the commitment and dispatch of generators to ensure power delivery is both reliable and economic. These decisions are typically made by a security constrained optimal flow, which determines future generator commitments, dispatches, and ensures adequate reserves are available in the event of a contingency (unexpected outage) or if future system conditions deviate from forecasts. However, security has been always based on a pre-specified subset of contingency constraints whose enforcement does not guarantee security under all possible future possibilities while also giving little or no weight to the likelihood of each contingent event or the severity of its consequences. Existing tools, which are based exclusively on deterministic optimization models, do not yield optimal operational decisions to address these new challenges, in terms of both reliability and cost-effectiveness. This project has focused on developing a stochastic optimal power flow (SOPF) framework, which integrates renewable resource uncertainty, load uncertainty, distributed storage (DS), demand response (DR) products, in a holistic manner to address the uncertainty associated with ever-increasing renewable resources, along with the inclusion of distributed demand response products in future power systems. A proof-of-concept problem was created using the Pennsylvania-Jersey-Maryland (PJM) power system network. Synthetic wind generation was added to the system to simulate 50% wind penetration. A 1-hour test of SOPF operation indicated more than 6% operational cost savings. The project continued by adding the Midwestern Independent System Operator (MISO) as a partner, with focus shifting from SOPF to Stochastic Look-Ahead Unit Commitment (SLAC). Unlike PJM, MISO is faced with significant renewable energy resources within its footprint and is challenged with substantial uncertainty in its operations. The SLAC distinguishes itself from existing tools that operators use. At best, today’s tools solve two to three cases independently, where one or two system parameters, such as forecasted load level (e.g., a low, base, and high forecast), are varied and the resulting scenarios are analyzed independently. The stochastic-based optimization of SLAC leverages statistical information from an ensemble of potential operational scenarios and their respective likelihood. The SLAC output can be translated into valuable information to the operator such as suggested commitments, optimal scheduling and dispatch of resources, reserve requirements at both locational and zonal resolutions, ramping availability and requirements, availability of demand response including operational guidance concerning the near-term and real-time coordination between distributed energy resources, and utilization of distributed storage resources. The developed SOPF/SLAC tool, a stand-alone tool compatible with existing EMSs, will provide system operators with unprecedented visibility, flexibility and predictability to these resources and operational guidance concerning the real-time coordination between DERs and DR/DS products. The game changing and practical impact of this disruptive technology will be dramatic and will usher in a new era in the electric power industry, wherein green energy concepts are fully embraced, and electric power costs are lowered throughout the nation.

42 ENGINEERING↗

Theoretical assessments of Pd–PdO phase transformation and its impacts on H 2 O 2 synthesis and decomposition pathways

The direct synthesis of H 2 O 2 from O 2 and H 2 provides a green pathway to produce H 2 O 2 , a popular industrial oxidant. Here, in this study, we theoretically investigate the effects of Pd oxidation states, coordination environments, and particle sizes on primary H 2 O 2 selectivities, assessed by calculating the ratio of rate constants for the formation of H 2 O 2 (via OOH* reduction; k O–H ) and the decomposition of OOH* (via O–O cleavage; k O–O ). For Pd metals, the k O–H /k O–O ratio decreased from 10 -4 for Pd(111) to 10 -10 for the Pd 13 cluster at 300 K, indicating poorer H 2 O 2 selectivity as Pd particle size decreases and low primary selectivities for H 2 O 2 overall. As the oxygen chemical potential increases and metals form surface and bulk oxides, the perturbation of Pd–Pd ensemble sites by lattice O atoms results in selectivities that become dramatically higher than unity. For instance, at 300 K, the k O–H /k O–O ratio increases significantly from 10 -4 to 10 9 to 10 16 as Pd(111) oxidizes to Pd 5 O 4 /Pd(111) and to PdO(100), respectively. In contrast, such selectivity enhancements are not observed for surface and bulk oxides that persistently contain rows of more metallic, undercoordinated Pd–Pd ensemble sites, such as PdO(101)/Pd(100) and PdO(101). These Pd–Pd ensembles are also absent when smaller Pd nanoparticles fully oxidize, indicating that smaller PdO clusters can be more selective for H 2 O 2 synthesis. These trends for primary H 2 O 2 selectivities were found to inversely correlate with trends for H 2 O 2 decomposition rates via O–O bond cleavage, demonstrating that catalysts with high primary H 2 O 2 selectivity can also hinder H 2 O 2 decomposition. Ab initio thermodynamic calculations are used to estimate the thermodynamically favored phase among Pd, PdO/Pd and PdO in O 2 , H 2 O 2 /H 2 O, and O 2 /H 2 environments. These results are combined to show that smaller Pd nanoparticles are more prone to be oxidized at lower oxygen chemical potentials, upon which they become more selective than larger Pd particles for H 2 O 2 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emergent Constrained Projections of Mean and Extreme Warming in China

Reliable regional temperature projections including heat extremes are essential for climate change adaptation and mitigation. Taking China as an example, simple averages from Coupled Model Intercomparison Project Phase 6 (CMIP6) models project high warming due to sampling many high climate sensitivities in the ensemble. Here, we develop an emergent constraint (EC) framework to obtain constrained mean and daily maximum temperature (TXx) warming over China by using observed global warming and local residual warming. The constrained annual mean and TXx warming over China (2.33°C [1.61–3.05°C] and 2.31°C [1.21–2.99°C]) are 0.65°C [0.04–1.76°C] and 0.63°C [–0.50–2.39°C], respectively, lower than raw projections (2.98°C [1.85–4.22°C] and 2.94°C [2.04–4.39°C]) for 2080–2099 under the intermediate-emission scenario. Approximately half model uncertainty is reduced after constraint. The land area (population) experiencing temperature extremes in our metric is 78% (85%) of the raw projections. Our results imply a lower impact of extreme heat than implied by current raw CMIP6 projections.

54 ENVIRONMENTAL SCIENCES↗

The Role of Subcloud Mesoscale Convergence in Sculpting Convective Updraft Width and Depth

The initiation of deep moist convection is governed in part by the horizontal width of updrafts near cloud base, which limits the deleterious effects of entrainment-driven dilution on buoyant thermals ascending through the free troposphere. However, the factors controlling cloud-base updraft width, which in turn dictates cloud depth, are not well understood. We track the evolving three-dimensional structure of the mesoscale subcloud forcing for vertical motion and near-cloud thermodynamic ingredients within a high-resolution ensemble of simulations of seven realistic daytime orographic convection initiation events to determine their relative roles in controlling cloud width and depth. Statistical analysis of approximately 5000 cloudy updraft samples indicates that the most important contributors to the width of cloudy updrafts across the ensemble are the depth and magnitude of the subcloud mesoscale ascent. However, the depth achieved by clouds is more consistently predicted by the near-cloud ambient relative humidity within the lower to middle free troposphere and convective available potential energy. Therefore, although the width of cloudy updrafts may be partly set at low levels by the mesoscale vertical mass and moisture flux, the likelihood of deep moist convection is governed by the generation of positive buoyancy within cumulus thermals and entrainment-driven dilution that reduces it. The persistence of the low-level mesoscale vertical forcing locally consolidates and vertically transports boundary layer moisture, helping to reduce updraft dilution. However, these factors vary in relative impacts on cloudy updrafts across individual cases, indicating multiple pathways for deep convection initiation.

Convective storms↗

Aerosol-Cloud Interactions and the Intersection of Climate Forcing and Feedback

The goal of this project has been to understand at the process level how the interaction of aerosols and cloud microphysics may alter the cloud response to climate change from the scale of turbulence to the global scale. Atmospheric aerosols (suspended particulates) have a unique role to play in the climate system. Anthropogenic aerosols may be an air pollution hazard and degrade human health. Their presence also results in the direct scattering or absorption of sunlight, with small net impacts on climate. But aerosols are also a key part of cloud formation, as the locations on which cloud droplets and ice crystals form. Understanding these Aerosol Cloud Interactions (ACI) is a critical uncertainty for climate models, including the Energy Exascale Earth System Model (E3SM), and affects how well models like E3SM can simulate the past and future. This work aims to understand cloud microphysics as well as the interaction of aerosol forcing and cloud feedback through improving our understanding of aerosol-cloud interactions (ACI) by looking at their uncertainty in critical environments at the process level. It will also contribute to the development of E3SM. Specific goals include: first, high level analysis of Perturbed Parameter Ensemble (PPE) simulations already available from the Community Earth System Model (CESM) and E3SM. Second, detailed analysis of recent changes to temperature and the role of aerosols.

54 ENVIRONMENTAL SCIENCES↗

Climate hazard indices projections based on CORDEX-CORE, CMIP5 and CMIP6 ensemble

The CORDEX-CORE initiative was developed with the aim of producing homogeneous regional climate model (RCM) projections over domains world wide. In its first phase, two RCMs were run at 0.22° resolution downscaling 3 global climate models (GCMs) from the CMIP5 program for 9 CORDEX domains and two climate scenarios, the RCP2.6 and RCP8.5. The CORDEX-CORE simulations along with the CMIP5 GCM ensemble and the most recently produced CMIP6 GCM ensemble are analyzed, with focus on several temperature, heat, wet and dry hazard indicators for present day and mid-century and far future time slices. The CORDEX-CORE ensemble shows a better performance than the driving GCMs for several hazard indices due to its higher spatial resolution. For the far future time slice the 3 ensembles project an increase in all temperature and heat indices analyzed under the RCP8.5 scenario. The largest increases are always shown by the CMIP6 ensemble, except for Tx > 35 °C, for which the CORDEX-CORE projects higher warming. Extreme wet and flood prone maxima are projected to increase by the RCM ensemble over the la Plata basin in South America, the Congo basin in Africa, east North America, north east Europe, India and Indochina, regions where a better performance is obtained, whereas the GCM ensembles show small or negligible signals. Furthermore, compound hazard hotspots based on heat, drought and wet indicators are detected in each continent worldwide in region like Central America, the Amazon, the Mediterranean, South Africa and Australia, where a linear relation is shown between the heatwave and drought change signal, and region like Arabian peninsula, the central and south east Africa region (SEAF), the north west America (NWN), south east Asia, India, China and central and northern European regions (WCE, NEU) where the same linear relation is found for extreme precipitation and HW increases. Although still limited, the CORDEX-CORE initiative was able to produce high resolution climate projections with almost global coverage and can provide an important resource for impact assessment and climate service activities.

54 ENVIRONMENTAL SCIENCES↗

Revealing the Crystalline Architecture of Semicrystalline Ion Exchange Membranes for the Design of Conductive and Durable Alkaline Anion Exchange Membranes

Alkaline anion exchange membrane (AAEM) fuel cells offer a cost-effective alternative to proton exchange membrane (PEM) fuel cells by eliminating the need for expensive precious metal catalysts. In both PEMs and AAEMs, semicrystalline polymers are a common choice, as the crystalline domains can act as mechanical reinforcements that limit swelling and promote mechanical durability in the material. However, spatially resolved characterization of crystalline organization in ion exchange membranes beyond ensemble-averaged X-ray scattering is underrepresented, likely in part due to ionization damage limitations in soft materials. Here, in this study, we resolve the nanometer-size crystallites in semicrystalline ion exchange membranes by applying cryogenic four-dimensional scanning transmission electron microscopy (cryo-4D-STEM) along with data-processing algorithms designed to optimize signals at a low dose to minimize radiation damage. We investigate the effects of synthesis components, including molecular weight and thermal treatment, on a model system of AAEMs in comparison to Nafion, the most commonly used and commercially successful PEM today. We find that excess water uptake in polymer membranes, a property directly associated with weak mechanical durability and with possible negative impacts on ion conductivity, can be reduced by over 30% by varying the polymer's crystalline morphology through changes in synthesis parameters such as molecular weight and thermal history. Our results indicate that this improvement is correlated with smaller crystalline domains with a more homogeneous distribution. More broadly, these results demonstrate how the crystalline architecture of polymer membranes can be tuned through their chemistry and thermal treatment in order to improve their conductivity and durability for commercial fuel cell performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimating viscosity of individual substrate-deposited particles from measurements of their height-to-width ratios

Airborne particles alter the radiative forcing of climate and have further consequences on air visibility, atmospheric chemistry, and human health. Recent studies reported the existence of highly viscous semisolid and even solid amorphous organic aerosol (OA) particles. Particle viscosity has an impact on the heterogeneous chemistry, gas-particle partitioning, and ice nucleation properties. Consequently, variations in particle viscosity must be considered when predicting the atmospheric impact of OA. Here, in this work, we use scanning electron microscopy (SEM) and scanning transmission X-ray microscopy (STXM) to estimate the viscosity of individual particles deposited on substrates based on their characteristic height-to-width ratios, which are affected by changes in morphology upon deposition. The height-to-width ratios obtained from SEM and STXM exhibit a strong correlation, demonstrating that both imaging approaches can be applied separately for viscosity assessment of the substrate-deposited particles. While these metrics are largely qualitative, this method enables rapid assessment of particle viscosity ranges, distinguishing between semisolid (>10 10 Pa·s), viscous (10 4– 10 8 Pa·s), and liquid (10°–10 1 Pa·s) particles within ensembles of ambient particles collected for microscopy studies.

54 ENVIRONMENTAL SCIENCES↗

Stream Temperature Predictions for River Basin Management in the Pacific Northwest and Mid-Atlantic Regions Using Machine Learning

Stream temperature (Ts) is an important water quality parameter that affects ecosystem health and human water use for beneficial purposes. Accurate Ts predictions at different spatial and temporal scales can inform water management decisions that account for the effects of changing climate and extreme events. In particular, widespread predictions of Ts in unmonitored stream reaches can enable decision makers to be responsive to changes caused by unforeseen disturbances. In this study, we demonstrate the use of classical machine learning (ML) models, support vector regression and gradient boosted trees (XGBoost), for monthly Ts predictions in 78 pristine and human-impacted catchments of the Mid-Atlantic and Pacific Northwest hydrologic regions spanning different geologies, climate, and land use. The ML models were trained using long-term monitoring data from 1980–2020 for three scenarios: (1) temporal predictions at a single site, (2) temporal predictions for multiple sites within a region, and (3) spatiotemporal predictions in unmonitored basins (PUB). In the first two scenarios, the ML models predicted Ts with median root mean squared errors (RMSE) of 0.69–0.84 °C and 0.92–1.02 °C across different model types for the temporal predictions at single and multiple sites respectively. For the PUB scenario, we used a bootstrap aggregation approach using models trained with different subsets of data, for which an ensemble XGBoost implementation outperformed all other modeling configurations (median RMSE 0.62 °C).The ML models improved median monthly Ts estimates compared to baseline statistical multi-linear regression models by 15–48% depending on the site and scenario. Air temperature was found to be the primary driver of monthly Ts for all sites, with secondary influence of month of the year (seasonality) and solar radiation, while discharge was a significant predictor at only 10 sites. The predictive performance of the ML models was robust to configuration changes in model setup and inputs, but was influenced by the distance to the nearest dam with RMSE <1 °C at sites situated greater than 16 and 44 km from a dam for the temporal single site and regional scenarios, and over 1.4 km from a dam for the PUB scenario. Our results show that classical ML models with solely meteorological inputs can be used for spatial and temporal predictions of monthly Ts in pristine and managed basins with reasonable (<1 °C) accuracy for most locations.

54 ENVIRONMENTAL SCIENCES↗

Moments of axial-vector GPD from lattice QCD: quark helicity, orbital angular momentum, and spin-orbit correlation

In this work, we present a lattice QCD calculation of the Mellin moments of the twist-2 axial-vector generalized parton distribution (GPD), $\overset{\sim }{H}\left(x,\xi, t\right)$ , at zero skewness, ξ, with multiple values of the momentum transfer, t. Our analysis employs the short-distance factorization framework on ratio-scheme renormalized quasi-GPD matrix elements. The calculations are based on an N f = 2 + 1 + 1 twisted mass fermions ensemble with clover improvement, a lattice spacing of a = 0.093 fm, and a pion mass of m π = 260 MeV. We consider both the iso-vector and iso-scalar cases, utilizing next-to-leading-order perturbative matching while omitting the disconnected contributions and gluon mixing in the iso-scalar case. For the first time, we determine the Mellin moments of $\overset{\sim }{H}$ up to the fifth order. From these moments, we discuss the quark helicity and orbital angular momentum contributions to the nucleon spin, as well as the spin-orbit correlations of the quarks. Additionally, we perform a Fourier transform over the momentum transfer, which allows us to explore the spin structure in the impact-parameter space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigating the linkage between simulated precipitation climatology and ENSO-related precipitation anomaly based on multi-model and perturbed parameter ensembles

It remains a challenge for climate models to correctly capture the relationship between precipitation and ENSO. This studyexamines the linkage between the simulated precipitation climatology and ENSO-related precipitation anomaly during borealwinter based on the multi-model ensemble from the Atmospheric Model Intercomparison Project Phase 5 (AMIP5) and perturbedparameter ensemble (PPE) with the Beijing Climate Center (BCC) atmospheric model. The AMIP5 models have large biases insimulating the tropical precipitation anomaly during El Niño, such as the shifts of the Inter-Tropical Convergence Zone (ITCZ)and South Pacific Convergence Zone (SPCZ). The inter-model differences show that the precipitation change in response to seasurface temperature (SST) change increases with enhanced precipitation climatology. The ENSO-related precipitation anomalycan also be related to the spatial distribution of the mean-state precipitation. The simulated ITCZ/SPCZ displacements aresignificantly correlated with the spatial precipitation-SST relationship in the mean state. Models with stronger mean-stateprecipitation-SST relationship also produce stronger SPCZ/ITCZ displacements. The mean-state tropical precipitation also hasstrong impacts on the ENSO-related precipitation anomalies over East Asia. In the BCC PPE, the connection between the mean-state precipitation and ENSO-related precipitation anomaly is overall consistent with that in AMIP5. Parameters associated withthe low-cloud and deep convection processes are the most influential ones for the precipitation simulations in BCC. Comparedwith the version in AMIP5, the new BCC model can better simulate the precipitation climatology and the relationship betweenENSO and precipitation over southern China. These results have important implications for model development and model-basedclimate predictions.

Yang, Ben↗

Cloud water adjustments to aerosol perturbations are buffered by solar heating in non-precipitating marine stratocumuli

Abstract. Marine low-level clouds are key to the Earth's energy budget due to their expansive coverage over global oceans and their high reflectance of incoming solar radiation. Their responses to anthropogenic aerosol perturbations remain the largest source of uncertainty in estimating the anthropogenic radiative forcing of climate. A major challenge is the quantification of the cloud water response to aerosol perturbations. In particular, the presence of feedbacks through microphysical, dynamical, and thermodynamical pathways at various spatial and temporal scales could augment or weaken the response. Central to this problem is the temporal evolution in cloud adjustment, governed by entangled feedback mechanisms. We apply an innovative conditional Monte Carlo subsampling approach to a large ensemble of diurnal large-eddy simulation of non-precipitating marine stratocumulus to study the role of solar heating in governing the evolution in the relationship between droplet number and cloud water. We find a persistent negative trend in this relationship at night, confirming that the role of microphysically enhanced cloud-top entrainment. After sunrise, the evolution in this relationship appears buffered and converges to ∼-0.2 in the late afternoon. This buffering effect is attributed to a strong dependence of cloud-layer shortwave absorption on cloud liquid water path. These diurnal cycle characteristics further demonstrate a tight connection between cloud brightening potential and the relationship between cloud water and droplet number at sunrise, which has implications for the impact of the timing of advertent aerosol perturbations.

Zhang, Jianhao (ORCID:0000000169882935)↗

Tropical Interbasin Interaction as Effective Predictors of Late-Spring Precipitation Variability in the Southern Great Plains

Abstract The southern Great Plains experience fluctuating precipitation extremes that significantly impact agriculture and water management. Despite ongoing efforts to enhance forecast accuracy, the underlying causes of these climatic phenomena remain inadequately understood. This study elucidates the relative influence of the tropical Pacific and Atlantic basins on April–May–June precipitation variability in this region. Our partial ocean assimilation experiments using the Community Earth System Model unveil the prominent role of interbasin interaction, with the Pacific and Atlantic contributing approximately 70% and 30%, respectively, to these interbasin contrasts. Our statistical analyses suggest that these tropical interbasin contrasts could serve as a more reliable indicator for late-spring precipitation anomalies than El Niño–Southern Oscillation. The conclusions are reinforced by analyses of seven climate forecasting systems within the North American Multi-Model Ensemble, offering an optimistic outlook for enhancing real-time forecasting of late-spring precipitation in the southern plains. However, the current predictive skills of the interbasin contrasts across the prediction systems are hindered by the lower predictability of the tropical Atlantic Ocean, pointing to the need for future research to refine climate prediction models further. Significance Statement Agriculture and infrastructure in the southern plains face challenges from severe late-spring precipitation extremes. Traditional predictors like El Niño–Southern Oscillation (ENSO) lose effectiveness during the critical spring-to-summer transition, creating a forecasting gap. This study introduces the concept of tropical interbasin interactions, known to enhance seasonal predictability for late-spring precipitation in the southern plains. Novel climate model experiments highlight contributions from the tropical Pacific and Atlantic, offering a promising predictability that potentially surpasses the limitations of ENSO-based predictions. These outcomes hold the potential for developing operational forecasts of late-spring precipitation anomalies in the southern plains, enabling proactive risk management.

Chikamoto, Yoshimitsu↗

Binary Quantum Control Optimization with Uncertain Hamiltonians

Optimizing the controls of quantum systems plays a crucial role in advancing quantum technologies. The time-varying noises in quantum systems and the widespread use of inhomogeneous quantum ensembles raise the need for high-quality quantum controls under uncertainties. In this paper, we consider a stochastic discrete optimization formulation of a discretized binary optimal quantum control problem involving Hamiltonians with predictable uncertainties. We propose a sample-based reformulation that optimizes both risk-neutral and risk-averse measurements of control policies, and solve these with two gradient-based algorithms using sum-up-rounding approaches. Furthermore, we discuss the differentiability of the objective function and prove upper bounds of the gaps between the optimal solutions to binary control problems and their continuous relaxations. We conduct numerical simulations on various sized problem instances based on two applications of quantum pulse optimization; we evaluate different strategies to mitigate the impact of uncertainties in quantum systems. In conclusion, we demonstrate that the controls of our stochastic optimization model achieve significantly higher quality and robustness compared with the controls of a deterministic model.

conditional value-at-risk (CVaR)↗

Estimating irrigation water use from remotely sensed evapotranspiration data: Accuracy and uncertainties at field, water right, and regional scales

Irrigated agriculture is the dominant user of water globally, but most water withdrawals are not monitored or reported. As a result, it is largely unknown when, where, and how much water is used for irrigation. Here, we evaluated the ability of remotely sensed evapotranspiration (ET) data, integrated with other datasets, to calculate irrigation water withdrawals and applications in an intensively irrigated portion of the United States. We compared irrigation calculations based on an ensemble of satellite-driven ET models from OpenET with reported groundwater withdrawals from hundreds of farmer irrigation application records and a statewide flowmeter database at three spatial scales (field, water right group, and management area). At the field scale, we found that ET-based calculations of irrigation agreed best with reported irrigation when the OpenET ensemble mean was aggregated to the growing season timescale (bias = 1.6–4.9%, R 2 = 0.53–0.74), and agreement between calculated and reported irrigation was better for multi-year averages than for individual years. At the water right group scale, linking pumping wells to specific irrigated fields was the primary source of uncertainty. At the management area scale, calculated irrigation exhibited similar temporal patterns as flowmeter data but tended to be positively biased with more interannual variability. Disagreement between calculated and reported irrigation was strongly correlated with annual precipitation, and calculated and reported irrigation agreed more closely after statistically adjusting for annual precipitation. The selection of an ET model was also an important consideration, as variability across ET models was larger than the potential impacts of conservation measures employed in the region. From these results, we suggest key practices for working with ET-based irrigation data that include accurately accounting for changes in soil moisture, deep percolation, and runoff; careful verification of irrigated area and well-field linkages; and conducting application-specific evaluations of uncertainty.

59 BASIC BIOLOGICAL SCIENCES↗