Search NASA⌕ Search

SEARCH · Search NASA

Results for “FEED study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Feasibility Study of Optically Transparent Microstrip Patch Antenna

The paper presents a feasibility study on optically transparent patch antennas with microstrip line and probe feeds. The two antennas operate at 2.3 GHz and 19.5 GHz respectively. They are constructed from a thin sheet of clear polyester with an AgHT-8 optically transparent conductive coating. The experimental results show good radiation patterns and input impedance match. The antennas have potential applications in mobile wireless communications.

Simons, Rainee N.↗
NASA NTRS1993

Investigation of alternate power source for Space Shuttle Orbiter hydraulic system

This investigation consists of a short-term feasibility study to determine whether or not an alternate electrical power source would trade favorably from a performance, reliability, safety, operation, and weight standpoint in replacing the current auxiliary power unit subsystems with its attendant components (water spray boiler, hydrazine fuel and tanks, feed and vent lines, controls, etc.), operating under current flight rules. Results of this feasibility study are used to develop recommendations for the next step (e.g., to determine if such an alternate electrical power source would show an advantage given that the current operational flight mode of the system could be modified in such a way as not to constrain the operational capability and safety of the vehicle). However, this next step is not within the scope of this investigation. This study does not include a cost analysis, nor does it include investigation of the integration aspects involved in such a trade, except in a qualitative sense for the determination of concept feasibility.

Simon, William E.↗
NASA NTRS1981

LAMMR: A new generation satellite microwave radiometer - Its concepts and capabilities

Definition studies and baseline design are summarized for the proposed, and now discontinued, LAMMR. The instrument is an offset parabolic reflector with Cassegrain feeds. The three-meter aperture reflector, to be constructed using graphite-epoxy technology, rotates continuously at 0.833 rps. The scan drive subsystem includes momentum compensation for the rotating mass which includes the reflector, the support arm and Cassegrain subreflector, feed horns and radiometer. Two total power radiometers are recommended for each frequency, one each for horizontal and vertical polarizations. The selection plan, definition study specifications, LAMMR performance specifications, and predicted accuracies and resolutions after processing are shown.

Walton, W. T.↗
NASA NTRS2018

Carbon Dioxide Methanation for Human Exploration of Mars: A Look at Catalyst Longevity and Activity Using Supported Ruthenium

Overarching Purpose: To design a carbon dioxide methanation/Sabatier reaction catalyst able to withstand variable conditions including fluctuations in bed temperature and feed flow rates for 480 days of remote operation to produce seven tons of methane. Current Study Purpose: Examine supported Ruthenium as a carbon dioxide methanation catalyst to determine the effects support properties have on the active phase by studying activity and selectivity. Objective: The remote operation of the Mars ISRU (In Situ Resources Utilization) lander to produce rocket fuel prior to crew arrival on the planet to power an ascent vehicle. Constraints: Long-term operation (480 days); Variable conditions: Feed gas flow rates, Feed gas flow ratios, Reactor bed temperature.

SiC↗
NASA NTRS1995

A method using focal plane analysis to determine the performance of reflector antennas

Reflector antenna optimization schemes using array feeds have been used to recover antenna losses resulting from antenna distortions and aberrations and to generate contour coverage patterns. Historically, these optimizations have been carried out using the antenna far-field scattered patterns. The far-field patterns must be calculated separately for each of the array feed elements. For large or complex antennas (which include beam-waveguide antennas), the far-field calculation times can be prohibitive. This article presents a method with which the optimization can be carried out in the antenna focal region, where the scattering calculation needs only to be done once independently of the number of the elements in the array. This article also includes the results of a study, utilizing this unique technique, to determine the capabilities and limitations of using array feeds to compensate for gravitational induced losses in large reflector antennas.

Cramer, P. W.↗
DOE OSTI2022

β decay of Ba 141

The β-decay strength function of nuclides produced in fission is important as it dictates the distribution of decay energy between electrons, neutrinos, and γ rays and so is critical for calculating decay heat in reactors and for estimating the reactor antineutrino spectrum. Several experimental techniques are available to determine this strength function, including electron spectroscopy, γ-ray calorimetry (TAGS spectroscopy), and detailed, high-resolution spectroscopy with modern large high-purity germanium arrays. This work investigates the decay of the well-known and strongly produced fission fragment 141 Ba. A beam of 141 Cs was implanted at the target position of the Gammasphere and the subsequent decay of the daughter 141 Ba was studied. Extensive decay spectroscopy was possible up to the decay Q value of 3.197(7) MeV, including a significant extension of the level scheme and detailed angular correlation measurements for all levels with greater than 0.25% β feeding. The distribution of the β-decay strength was then inferred and compared to previous calorimetric studies. In conclusion, the agreement was excellent and provides a benchmark for comparing strength function methods and data for a more detailed understanding of the structure of 141 La.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1995

Electrolysis Performance Improvement Concept Study (EPICS) flight experiment phase C/D

The overall purpose of the Electrolysis Performance Improvement Concept Study flight experiment is to demonstrate and validate in a microgravity environment the Static Feed Electrolyzer concept as well as investigate the effect of microgravity on water electrolysis performance. The scope of the experiment includes variations in microstructural characteristics of electrodes and current densities in a static feed electrolysis cell configuration. The results of the flight experiment will be used to improve efficiency of the static feed electrolysis process and other electrochemical regenerative life support processes by reducing power and expanding the operational range. Specific technologies that will benefit include water electrolysis for propulsion, energy storage, life support, extravehicular activity, in-space manufacturing and in-space science in addition to other electrochemical regenerative life support technologies such as electrochemical carbon dioxide and oxygen separation, electrochemical oxygen compression and water vapor electrolysis. The Electrolysis Performance Improvement Concept Study flight experiment design incorporates two primary hardware assemblies: the Mechanical/Electrochemical Assembly and the Control/Monitor Instrumentation. The Mechanical/Electrochemical Assembly contains three separate integrated electrolysis cells along with supporting pressure and temperature control components. The Control/Monitor Instrumentation controls the operation of the experiment via the Mechanical/Electrochemical Assembly components and provides for monitoring and control of critical parameters and storage of experimental data.

Schubert, F. H.↗
DOE OSTI2024

Systematic engineering for production of anti-aging sunscreen compound in Pseudomonas putida

Sunscreen has been used for thousands of years to protect skin from ultraviolet radiation. However, the use of modern commercial sunscreen containing oxybenzone, ZnO, and TiO 2 has raised concerns due to their negative effects on human health and the environment. In this study, we aim to establish an efficient microbial platform for production of shinorine, a UV light absorbing compound with anti-aging properties. First, we methodically selected an appropriate host for shinorine production by analyzing central carbon flux distribution data from prior studies alongside predictions from genome-scale metabolic models (GEMs). We enhanced shinorine productivity through CRISPRi-mediated downregulation and utilized shotgun proteomics to pinpoint potential competing pathways. Simultaneously, we improved the shinorine biosynthetic pathway by refining its design, optimizing promoter usage, and altering the strength of ribosome binding sites. Finally, we conducted amino acid feeding experiments under various conditions to identify the key limiting factors in shinorine production. The study combines meta-analysis of 13 C-metabolic flux analysis, GEMs, synthetic biology, CRISPRi-mediated gene downregulation, and omics analysis to improve shinorine production, demonstrating the potential of Pseudomonas putida KT2440 as platform for shinorine production.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2004

The Effect of Feeding Purified versus Chow Diet on Bone Changes Produced by Hindlimb Suspension of Female Rats

Spaceflight simulation studies use chow diets while spaceflight studies use a semi-purified &et. To determine whether the differences in these diets would affect the changes in unweighted bone, we compared the effects of purified vs chow diet on bone parameters, urinary calcium, plasma estradiol, and urinary corticosterone (CORT) in sexually mature female Sprague-Dawley rats. Rats fed purified AIN-93G or chow diet were kept ambulatory (AMB) or subjected to a spaceflight simulation model of unweighted hindlimbs (HLS) for 38 days. Body mass of treatment groups was similar although food intake and caloric density of the diets differed. Both HLS diet groups showed similar decreases in bone mineral content and mechanical strength in unweighted femurs compared to AMB (p<0.05). However, femur length was lower (p<0.05) in the chow-fed than AIN-93G fed groups. Urinary calcium excretion was greater in chow than AIN-93G fed rats, consistent with the higher level of calcium in the diet. Plasma estradiol was lower in HLS than in AMB fed AIN-93G, but similar in HLS and AMB chow fed groups. Femur mineral content was related to plasma estradiol (r(sup 2) =0.91, p<0.00l). Urinary CORT excretion was increased during initial HLS and elevated in HLS/chow-fed rats. Diets did not appear to affect the osteopenia induced by unweighting, but effects on bone growth, calcium excretion, plasma estradiol and urinary CORT do not support the view that these diets can by used interchangeably in bone studies.

Tou, Janet↗
DOE OSTI2021

A Transported Livengood–Wu Integral Model for Knock Prediction in Computational Fluid Dynamics Simulation

This work describes the development of a transported Livengood–Wu (L–W) integral model for computational fluid dynamics (CFD) simulation to predict autoignition and engine knock tendency. The currently employed L–W integral model considers both single-stage and two-stage ignition processes, thus can be generally applied to different fuels such as paraffin, olefin, aromatics, and alcohol. The model implementation is first validated in simulations of homogeneous charge compression ignition (HCCI) combustion for three different fuels, showing good accuracy in prediction of autoignition timing for fuels with either single-stage or two-stage ignition characteristics. Then, the L–W integral model is coupled with G-equation model to indicate end-gas autoignition and knock tendency in CFD simulations of a direct-injection spark-ignition engine. This modeling approach is about 10 times more efficient than the ones that based on detailed chemistry calculation and pressure oscillation analysis. Two fuels with same Research Octane Number (RON) but different octane sensitivity are studied, namely, Co-Optima alkylate and Co-Optima E30. Feed-forward neural network model in conjunction with multivariable minimization technique is used to generate fuel surrogates with targets of matched RON, octane sensitivity, and ethanol content. The CFD model is validated against experimental data in terms of pressure traces and heat release rate for both fuels under a wide range of operating conditions. The knock tendency—indicated by the fuel energy contained in the autoignited region—of the two fuels at different load conditions correlates well with the experimental results and the fuel octane sensitivity, implying the current knock modeling approach can capture the octane sensitivity effect and can be applied to further investigation on composition of octane sensitivity.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

A transported Livengood-Wu integral model for knock prediction in CFD simulation

This work describes the development of a transported Livengood-Wu (L-W) integral model for computational fluid dynamics (CFD) simulation to predict auto-ignition and engine knock tendency. The currently employed L-W integral model considers both single-stage and two-stage ignition processes, thus can be generally applied to different fuels such as paraffin, olefin, aromatics and alcohol. The model implementation is first validated in simulations of homogeneous charge compression ignition combustion for three different fuels, showing good accuracy in prediction of auto-ignition timing for fuels with either single-stage or two-stage ignition characteristics. Then, the L-W integral model is coupled with G-equation model to indicate end-gas auto-ignition and knock tendency in CFD simulations of a direct injection spark ignition engine. This modeling approach is about 10 times more efficient than the ones that based on detailed chemistry calculation and pressure oscillation analysis. Two fuels with same Research Octane Number (RON) but different octane sensitivity are studied, namely Co-Optima Alkylate and Co-Optima E30. Feed-forward neural network model in conjunction with multi-variable minimization technique is used to generate fuel surrogates with targets of matched RON, octane sensitivity and ethanol content. The CFD model is validated against experimental data in terms of pressure traces and heat release rate for both fuels under a wide range of operating conditions. The knock tendency indicated by the fuel energy contained in the auto-ignited region of the two fuels at different load conditions correlates well with the experimental results and the fuel octane sensitivity, implying the current knock modeling approach can capture the octane sensitivity effect and can be applied to further investigation on composition of octane sensitivity.

Yue, Zongyu↗
DOE OSTI2020

(Invited) Modeling Electrolyzers: Exploring the Applied Voltage Breakdown

To commercialize successfully polymer-electrolyte electrolyzers and optimize their performance, one requires a detailed understanding of the underlying physics and phenomena. Mathematical modeling is ideally suited to explore such intricacies. In this Tutorial, the modeling equations and approaches towards both proton- and hydroxide-conducting polymer electrolyzers will be detailed. This includes the introduction of the applied voltage breakdown that separates the overall polarization curve into its constitutive parts such that the limiting mechanisms can be ascertained. Throughout, different case studies will be explored including impacts of bubble generation, liquid versus vapor feed, and pH changes due to carbonate and hydroxide solution feeds. A key focus of the Tutorial will be in exploring and describing the various transport and competing phenomena within the electrolyzer cell.

42 ENGINEERING↗
NASA NTRS1974

Tibial bone mineral distribution as influenced by calcium, phosphorus, and vitamin D feeding levels in the growing turkey

Roentgen signs, subperiosteal, endosteal, and trabecular bone growth are evaluated in turkeys fed phosphorus at the 0.5, 0.56, 0.68, 0.90, and 2.70 percent levels. Calcium levels of 0.30, 0.40, 0.60, 1.2, and 3.60 percent were also tested. Vitamin D levels of 0, 100, 300, 900 and 27,000 I.U. per day were likewise evaluated. Roentgen signs, bone mineral as measured by T-125 gamma ray absorption, and bone mineral growth patterns as shown by radiograph area projection are correlated with calcium, phosphorus, and vitamin D feeding levels. Differences in bone growth at the various feeding levels were observed which were not reflected by differences in other studied parameters.

Spurrell, F. A.↗
NASA NTRS1980

An improved capillary rheometer

Capillary rheometer incorporates cone-tipped preheated piston to compress plastized coal sample through narrow tube. Applied force is proportional to viscosity and is recorded on separate instrument. Samples are heated rapidly due to large area of cone surface. Device, primarily applied in designing efficient equipment for feeding coal into combustion chamber, may be readily used in other viscosity studies.

Feinstein, S. P.↗
NASA NTRS1982

The 15-meter diameter mechanically scanned deployable antenna

A preliminary design with structural model data and thermal-performance estimates of a 15-meter mechanically scanned deployable antenna (MSDA) that could be launched onboard a Shuttle Orbiter to provide radiometric brightness temperature maps of the Earth and oceans in selected bands over a frequency range from 1.4 to 11 GHz is provided. The study objectives were met through the design of a unique, integrated, offset feed mast and reflector design that uses the deployable box-truss structure as a building block. The performance of this system is summarized. The all graphite-epoxy, 4.57-meter prototype cube that was completed in 1981 and is proposed for this reflector and feed mast design is presented.

Coyner, J. V.↗
NASA NTRS1999

Laser Lightcraft Vehicle Design

Current space deployment vehicle research is investigating ways to lower the cost to place payloads into orbit. Beamed energy propulsion is one of the areas that are being studied. The Laser lightcraft concept, which uses a ground based laser as part of its propulsion system, falls into this category. This concept has been developed by previous Strategic Defense Initiative Office (SDIO) research. In this concept, the laser energy is reflected off of a mirror on the craft and is focused inside the cowl to created optical breakdown of the propellant. There are several concerns about the design that must be further studied. These include: 1) Thermodynamic analysis of the cryogenic fuel storage and feed systems, 2) Analysis of the regenerative cooling system for the primary optic, and 3) Analysis of focal blurring of the laser due to off-axis flight.

Buch, Kevin↗
NASA NTRS2002

The Efficiency and the Scalability of an Explicit Operator on an IBM POWER4 System

We present an evaluation of the efficiency and the scalability of an explicit CFD operator on an IBM POWER4 system. The POWER4 architecture exhibits a common trend in HPC architectures: boosting CPU processing power by increasing the number of functional units, while hiding the latency of memory access by increasing the depth of the memory hierarchy. The overall machine performance depends on the ability of the caches-buses-fabric-memory to feed the functional units with the data to be processed. In this study we evaluate the efficiency and scalability of one explicit CFD operator on an IBM POWER4. This operator performs computations at the points of a Cartesian grid and involves a few dozen floating point numbers and on the order of 100 floating point operations per grid point. The computations in all grid points are independent. Specifically, we estimate the efficiency of the RHS operator (SP of NPB) on a single processor as the observed/peak performance ratio. Then we estimate the scalability of the operator on a single chip (2 CPUs), a single MCM (8 CPUs), 16 CPUs, and the whole machine (32 CPUs). Then we perform the same measurements for a chache-optimized version of the RHS operator. For our measurements we use the HPM (Hardware Performance Monitor) counters available on the POWER4. These counters allow us to analyze the obtained performance results.

Frumkin, Michael↗