Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUNCTIONAL TYPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Sensitivity to the external temperature of some GPS time receivers

It has been assumed until recently that GPS time receiver units (recever+cables+antenna) have good stability and do not affect time transfer by more than 1 ns. Differences of a few nanoseconds sometimes observed during calibration campaigns have been attributed to external causes, such as multipath propagation, rather than to variations within the hardware. The characteristic feature of most comparisons of GPS time receivers is their short duration. Normally the comparison takes place, at most, over one week. To observe the behavior of GPS time receivers over a period of several months, an experiment has been organized involving three receivers of two types. All three were connected to the same atomic clock. An unexpected sensitivity to external temperature was found in one type of receiver. This effect proved to be a function of the length and type of the antenna cable. In the most unfavorable case the sensitivity was 1.8 ns/C.

Lewandowski, Wlodzimierz W.↗
NASA NTRS2000

Higher Order Modeling in Hybrid Approaches to the Computation of Electromagnetic Fields

Higher order geometry representations and interpolatory basis functions for computational electromagnetics are reviewed. Two types of vector-valued basis functions are described: curl-conforming bases, used primarily in finite element solutions, and divergence-conforming bases used primarily in integral equation formulations. Both sets satisfy Nedelec constraints, which optimally reduce the number of degrees of freedom required for a given order. Results are presented illustrating the improved accuracy and convergence properties of higher order representations for hybrid integral equation and finite element methods.

Wilton, Donald R.↗
NASA NTRS2008

Efficient G(sup 4)FET-Based Logic Circuits

A total of 81 optimal logic circuits based on four-gate field-effect transistors (G(sup 4)4FETs) have been designed to implement all Boolean functions of up to three variables. The purpose of this development was to lend credence to the expectation that logic circuits based on G(sup 4)FETs could be more efficient (in the sense that they could contain fewer transistors), relative to functionally equivalent logic circuits based on conventional transistors. A G(sup 4)FET a combination of a junction field-effect transistor (JFET) and a metal oxide/semiconductor field-effect transistor (MOSFET) superimposed in a single silicon island and can therefore be regarded as two transistors sharing the same body. A G(sup 4)FET can also be regarded as a single device having four gates: two side junction-based gates, a top MOS gate, and a back gate activated by biasing of a silicon-on-insulator substrate. Each of these gates can be used to control the conduction characteristics of the transistor; this possibility creates new options for designing analog, radio-frequency, mixed-signal, and digital circuitry. One such option is to design a G(sup 4)FET to function as a three-input NOT-majority gate, which has been shown to be a universal and programmable logic gate. Optimal NOT-majority-gate, G(sup 4)FET-based logic-circuit designs were obtained in a comparative study that also included formulation of functionally equivalent logic circuits based on NOR and NAND gates implemented by use of conventional transistors. In the study, the problem of finding the optimal design for each logic function and each transistor type was solved as an integer-programming optimization problem. Considering all 81 non-equivalent Boolean functions included in the study, it was found that in 63% of the cases, fewer logic gates (and, hence, fewer transistors) would be needed in the G(sup 4)FET-based implementations.

Vatan, Farrokh↗
NASA NTRS2011

Step-by-Step Simulation of Radiation Chemistry Using Green Functions for Diffusion-Influenced Reactions

Radiolytic species are formed approximately 1 ps after the passage of ionizing radiation through matter. After their formation, they diffuse and chemically react with other radiolytic species and neighboring biological molecules, leading to various oxidative damage. Therefore, the simulation of radiation chemistry is of considerable importance to understand how radiolytic species damage biological molecules [1]. The step-by-step simulation of chemical reactions is difficult, because the radiolytic species are distributed non-homogeneously in the medium. Consequently, computational approaches based on Green functions for diffusion-influenced reactions should be used [2]. Recently, Green functions for more complex type of reactions have been published [3-4]. We have developed exact random variate generators of these Green functions [5], which will allow us to use them in radiation chemistry codes. Moreover, simulating chemistry using the Green functions is which is computationally very demanding, because the probabilities of reactions between each pair of particles should be evaluated at each timestep [2]. This kind of problem is well adapted for General Purpose Graphic Processing Units (GPGPU), which can handle a large number of similar calculations simultaneously. These new developments will allow us to include more complex reactions in chemistry codes, and to improve the calculation time. This code should be of importance to link radiation track structure simulations and DNA damage models.

Plante, Ianik↗
NASA NTRS2012

Hybrid Theory of P-Wave Electron-Hydrogen Elastic Scattering

We report on a study of electron-hydrogen scattering, using a combination of a modified method of polarized orbitals and the optical potential formalism. The calculation is restricted to P waves in the elastic region, where the correlation functions are of Hylleraas type. It is found that the phase shifts are not significantly affected by the modification of the target function by a method similar to the method of polarized orbitals and they are close to the phase shifts calculated earlier by Bhatia. This indicates that the correlation function is general enough to include the target distortion (polarization) in the presence of the incident electron. The important fact is that in the present calculation, to obtain similar results only 35-term correlation function is needed in the wave function compared to the 220-term wave function required in the above-mentioned previous calculation. Results for the phase shifts, obtained in the present hybrid formalism, are rigorous lower bounds to the exact phase shifts.

Bhatia, Anand↗
NASA NTRS2012

Application of P-wave Hybrid Theory to the Scattering of Electrons from He+ and Resonances in He and H ion

The P-wave hybrid theory of electron-hydrogen elastic scattering [Phys. Rev. A 85, 052708 (2012)] is applied to the P-wave scattering from He ion. In this method, both short-range and long-range correlations are included in the Schroedinger equation at the same time, by using a combination of a modified method of polarized orbitals and the optical potential formalism. The short-correlation functions are of Hylleraas type. It is found that the phase shifts are not significantly affected by the modification of the target function by a method similar to the method of polarized orbitals and they are close to the phase shifts calculated earlier by Bhatia [Phys. Rev. A 69, 032714 (2004)]. This indicates that the correlation function is general enough to include the target distortion (polarization) in the presence of the incident electron. The important fact is that in the present calculation, to obtain similar results only a 20-term correlation function is needed in the wave function compared to the 220- term wave function required in the above-mentioned calculation. Results for the phase shifts, obtained in the present hybrid formalism, are rigorous lower bounds to the exact phase shifts. The lowest P-wave resonances in He atom and hydrogen ion have been calculated and compared with the results obtained using the Feshbach projection operator formalism [Phys. Rev. A, 11, 2018 (1975)]. It is concluded that accurate resonance parameters can be obtained by the present method, which has the advantage of including corrections due to neighboring resonances, bound states and the continuum in which these resonance are embedded.

Bhatia, A. K.↗
NASA NTRS1980

Characterization of three types of silicon solar cells for SEPS deep-space missions. Volume 2: Current voltage characteristics of Solarex textured P(+)8 to 10 mil, planar P(+)8 to 10 mil and planar P(+)2 mil cells as a function of temperature and intensity

Three types of high performance silicon solar cells, textured P(+)8 to 10 mil, planar P(+)8 to 10 mil and planar P(+)2 mil were evaluated for their low temperature and low intensity (LTLI) performance. Sixteen cells of each type were subjected to 11 temperatures and 9 intensities. The textured P(+)8 to 10 mil cells provided the best performance both at 1 astronomical unit and at LTLI conditions. The average efficiencies of this cell were 14.5 percent at 1 solar constant/+25 C and 18.7 percent at 0.086 solar constant/-100 C.

Whitaker, A. F.↗
NASA NTRS1972

A recalibration of the absolute magnitudes of supergiants.

Since luminosities of the supergiants are obtained most accurately by the group membership method, the study employed distance moduli of stellar groups that were determined from the magnitudes of the B-type main sequence stars using an extinction ratio of 3.0. For the supergiants, this ratio was taken to be a function of the spectral type following Schmidt-Kaler (1965) and Lee (1970). Supergiant data used in the construction of mean absolute magnitudes are discussed. In contrast to previous calibrations, no significant trend of visual absolute magnitude within a spectral subclass was found for the supergiants. Significant differences in some MK classes were observed between the results presented and the results of Blaauw and Schmidt-Kaler.

Stothers, R.↗
NASA NTRS2001

Extinction and Scattering Properties of Soot Emitted from Buoyant Turbulent Diffusion Flames

Extinction and scattering properties at wavelengths of 250-5200 nm were studied for soot emitted from buoyant turbulent diffusion flames in the long residence time regime where soot properties are independent of position in the overfire region and characteristic flame residence times. Flames burning in still air and fueled with gas (acetylene, ethylene, propane, and propylene) and liquid (benzene, toluene, cyclohexane, and n-heptane) hydrocarbon fuels were considered Measured scattering patterns and ratios of total scattering/absorption cross sections were in good agreement with predictions based on the Rayleigh-Debye-Gans (RDG) scattering approximation in the visible. Measured depolarization ratios were roughly correlated by primary particle size parameter, suggesting potential for completing RDG methodology needed to make soot scattering predictions as well as providing a nonintrusive way to measure primary soot particle diameters. Measurements of dimensionless extinction coefficients were in good agreement with earlier measurements for similar soot populations and were independent of fuel type and wavelength except for reduced values as the near ultraviolet was approached. The ratios of the scattering/absorption refractive index functions were independent of fuel type within experimental uncertainties and were in good agreement with earlier measurements. The refractive index function for absorption was similarly independent of fuel type but was larger than earlier reflectometry measurements in the infrared. Ratios of total scattering/absorption cross sections were relatively large in the visible and near infrared, with maximum values as large as 0.9 and with values as large as 0.2 at 2000 nm, suggesting greater potential for scattering from soot particles to affect flame radiation properties than previously thought.

Krishnan, S. S.↗
NASA NTRS2003

Efficient Development of High Fidelity Structured Volume Grids for Hypersonic Flow Simulations

A new technique for the control of grid line spacing and intersection angles of a structured volume grid, using elliptic partial differential equations (PDEs) is presented. Existing structured grid generation algorithms make use of source term hybridization to provide control of grid lines, imposing orthogonality implicitly at the boundary and explicitly on the interior of the domain. A bridging function between the two types of grid line control is typically used to blend the different orthogonality formulations. It is shown that utilizing such a bridging function with source term hybridization can result in the excessive use of computational resources and diminishes robustness. A new approach, Anisotropic Lagrange Based Trans-Finite Interpolation (ALBTFI), is offered as a replacement to source term hybridization. The ALBTFI technique captures the essence of the desired grid controls while improving the convergence rate of the elliptic PDEs when compared with source term hybridization. Grid generation on a blunt cone and a Shuttle Orbiter is used to demonstrate and assess the ALBTFI technique, which is shown to be as much as 50% faster, more robust, and produces higher quality grids than source term hybridization.

Alter, Stephen J.↗
NASA NTRS1994

Counts of galaxies in a merger model

A model for the photometric evolution of galaxies has been developed and has been applied to the problem of galaxy counts. The integrated colors of galaxies are calculated using the most recently computed evolutionary tracks from Maeder and collaborators complemented with evolutionary tracks derived by other authors. The asymptotic giant branch lifetime is left as a free parameter. A series of cosmological models using different values of the cosmological constant, lambda(sub 0), and the density parameter, omega(sub 0), have been computed. The universality hypothesis of the luminosity function of galaxies has been abandoned. The influence of galaxy merging on the counts has been considered in a simple manner by assuming that the number of strongly interacting galaxies in a comoving volume increases with redshift as a power law given by (1 + z)(exp 3.8). Taking a Schechter parametrization for the luminosity function of the different types of galaxies, we are able to reproduce the observations reasonably well. We have also considered models with a Gaussian distribution for the luminosity function of the brighter galaxies that provide a poorer fit to the observations. It is shown that galaxy count data are not yet able to make unambiguous cosmological statements since evolutionary assumptions are critical. In particular, an omega(sub 0) = 1, lambda(sub 0) = 0 cosmology is shown to be consistent with the data.

Colin, P.↗
NASA NTRS1990

A new beam theory using first-order warping functions

Due to a certain type of loading and geometrical boundary conditions, each beam will respond differently depending on its geometrical form of the cross section and its material definition. As an example, consider an isotropic rectangular beam under pure bending. Plane sections perpendicular to the longitudinal axis of the beam will remain plane and perpendicular to the deformed axis after deformation. However, due to the Poisson effect, particles in the planes will move relative to each other resulting in a form of anticlastic deformation. In other words, even in pure bending of an isotropic beam, each cross section will deform in the plane. If the material of the beam above is replaced by a generally anisotropic material, then the cross sections will not only deform in the plane, but also out of plane. Hence, in general, both in-plane deformation and out-of-plane warping will exist and depend on the geometrical form and material definition of the cross sections and also on the loadings. For the purpose of explanation, an analogy is made. The geometrical forms of the bodies of each individual are unique. Hence, different sizes of clothes are needed. Finding the sizes of clothes for individuals is like determining the warping functions in beams. A new beam theory using first-order warping functions is introduced. Numerical examples will be presented for an isotropic beam with rectangular cross section. The theory can be extended for composite beams.

Ie, C. A.↗
NASA NTRS1979

Method for decomposing observed line shapes resulting from multiple causes - Application to plasma charge-exchange-neutral spectra

A method is given for decomposing the widths of observed spectral lines resulting from unresolved line splitting, additive kinetic processes of different types, instrumental broadening (slit function), Doppler broadening, etc. all superimposed. The second moments are used as measures of the various widths involved. The method is not applicable if dispersion type (Lorentz) broadening occurs. Application is made to plasma charge-exchange-neutral spectra of hydrogen, deuterium, and helium.

Patch, R. W.↗
NASA NTRS1973

Time and motion, experiment M151

Astronaut work performance during the preparation and execution of experiments in simulated Skylab tests was analyzed according to time and motion in order to evaluate the efficiency and consistency of performance (adaptation function) for several different types of activity over the course of the mission; to evaluate the procedures to be used by the same experiment in Skylab; to generate characteristic adaptation functions for later comparison with Skylab data; and to examine astronaut performance for any behavioral stress due to the environment. The overall results indicate that the anticipated adaptation function was obtained both for individual and for averaged data.

Kubis, J. F.↗
NASA NTRS1989

Theoretical study of the dipole moment function of OH(X2Pi)

A theoretical study of the sensitivity of the dipole moment function (DMF) of the X2Pi ground state of OH to basis-set saturation and to refinements in the correlation treatment is presented. Emphasis is placed on determining the slope of the DMF at r(e) and the r value at which the maximum occurs. Consideration is given to the effect of oxygen polarization functions up through h type, expansion of the active orbital space to include the O 3d-delta orbital, the effect of higher excitations using the averaged coupled-pair functional method, and the effect of evaluating the dipole moment as an energy derivative rather than as an expectation value. The theoretical DMFs obtained here, which should be the most accurate to date, differ markedly from an empirical DMF of Turnbull and Lowe that is based on experimentally derived intensity ratios. The theoretical DMFs agree better with a recently published DMF of Nelson et al., but suggest that this empirical DMF is also inaccurate for r greater than 2.3 a0.

Langhoff, Stephen R.↗
NASA NTRS1983

Combined ultraviolet studies of astronomical sources

Ultraviolet spectra of non-radiataive shock waves grain destruction and elemental abundances in interstellar shocks, carbon abundance in M33 and M31 from supernova remnants, determination of the mass function in the large Magellanic cloud, UV spectra of white dwarf pulsars, stellar flares, availability of the double quasar Q 0957 + 56' AB, spectra of late-F dwarfs and their relation to rotation, dynamics of hot gas surrounding hybrid stars, high resolution study of epsilon coronae Austriual, active regions on solar-type dwarfs as a function of rotation rate and age, coordinated chromospheric synoptic observations of selected late-type stars, the two-component atmosphere of Lambda Andromedae, and activity in Hyades giants are discussed.

Dupree, A. K.↗
NASA NTRS1993

Survey incompleteness and the evolution of the QSO luminosity function

We concentrate on a type of QSO survey which depends on selecting QSO candidates based on combinations of colors. Since QSO's have emission lines and power-law continua, they are expected to yield broadband colors unlike those of stellar photospheres. Previously, the fraction of QSO's expected to be hiding (unselected) within the locus of stellar (U-J, J-F) colors was estimated at about 15 percent. We have now verified that the KK88 survey is at least 11 percent incomplete, but have determined that it may be as much as 34 percent incomplete. The 'missing' QSO's are expected to be predominantly at z less than or = 2.2. We have studied the proper motion and variability properties of all stellar objects with J less than or = 22.5 or F less than or = 21.5 in the SA 57 field which has previously been surveyed with a multicolor QSO search by KK88.

Majewski, Steven R.↗