Search NASA⌕ Search

SEARCH · Search NASA

Results for “GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Station-keeping guidance

The station-keeping guidance system is described, which is designed to automatically keep one orbiting vehicle within a prescribed zone fixed with respect to another orbiting vehicle. The active vehicle, i.e. the one performing the station-keeping maneuvers, is referred to as the shuttle. The other passive orbiting vehicle is denoted as the workshop. The passive vehicle is assumed to be in a low-eccentricity near-earth orbit. The primary navigation sensor considered is a gimballed tracking radar located on board the shuttle. It provides data on relative range and range rate between the two vehicles. Also measured are the shaft and trunnion axes gimbal angles. An inertial measurement unit (IMU) is provided on board the orbiter. The IMU is used at all times to provide an attitude reference for the vehicle. The IMU accelerometers are used periodically to monitor the velocity-correction burns applied to the shuttle during the station-keeping mode. The guidance system is capable of station-keeping the shuttle in any arbitrary position with respect to the workshop by periodically applying velocity-correction pulses to the shuttle.

Gustafson, D. E.↗
NASA NTRS1974

Navigation and guidance requirements for commercial VTOL operations

The NASA Langley Research Center (LaRC) has undertaken a research program to develop the navigation, guidance, control, and flight management technology base needed by Government and industry in establishing systems design concepts and operating procedures for VTOL short-haul transportation systems in the 1980s time period. The VALT (VTOL Automatic Landing Technology) Program encompasses the investigation of operating systems and piloting techniques associated with VTOL operations under all-weather conditions from downtown vertiports; the definition of terminal air traffic and airspace requirements; and the development of avionics including navigation, guidance, controls, and displays for automated takeoff, cruise, and landing operations. The program includes requirements analyses, design studies, systems development, ground simulation, and flight validation efforts.

Hoffman, W. C.↗
NASA NTRS1974

A new guidance strategy for unpowered Space Shuttle orbiter flight

A new guidance strategy for use during the TAEM (terminal area energy management) phase of the Shuttle reentry flight has been developed. This guidance system steers the vehicle from initial conditions at about 70,000 ft altitude and Mach 1.5 to the beginning of the final landing maneuver. Explicit control of the vehicle's total energy (potential plus kinetic) via the energy dissipation rate allows this system to effectively control the vehicle's energy in the presence of a head or tail wind without a-priori knowledge of the wind. Furthermore, this is accomplished while maintaining a wings-level attitude during most of the flight.

Elias, A.↗
NASA NTRS1973

Reentry guidance for Space Shuttle

An explicit guidance scheme is outlined which provides the appropriate energy management in order for the shuttle orbiter to reach any location within the required footprint. Considering the orbiter as entering the earth's atmosphere, expressions for the downrange, crossrange, and the time of the termination of the entry phase as functions of the control variables are developed. Performing an order-of-magnitude analysis of the terms in these expressions, only dominant terms are retained. Analytical expressions for the elements of the sensitivity matrix which represents the partial derivatives of the desired range with respect to control variables are formulated. Using the Gauss-Jordan inversion technique, the required change in guidance commands as a function of the deviations in the downrange and crossrange are explicitly computed.

Causey, W.↗
NASA NTRS1975

Flight performance of a navigation, guidance, and control system concept for automatic approach and landing of space shuttle orbiter

Unpowered automatic approaches and landings were conducted to study navigation, guidance, and control problems associated with terminal area approach and landing for the space shuttle vehicle. The flight tests were performed in a Convair 990 aircraft equipped with a digital flight control computer connected to the aircraft control system and displays. The tests were designed to evaluate the performance of a navigation and guidance concept that utilized blended radio/inertial navigation with VOR, DME, and ILS as the ground navigation aids. Results from 36 automatic approaches and landings from 11,300 m (37,000 ft) to touchdown are presented. Preliminary results indicate that this concept may provide sufficient accuracy to accomplish automatic landing of the shuttle orbiter without air-breathing engines.

Edwards, F. G.↗
NASA NTRS1975

Boost navigation and guidance

The verification that the boost mode portion of the flight program correctly provides navigation and guidance functions for the vehicle during periods when significant, measurable accelerations exist was described. Many test cases and performance cases are made, testing the ability of the navigation and guidance routines to properly compensate for several perturbations. Various plots of special interest parameters are made on all performance cases, facilitating a check on each calculation (each boost major loop) of these parameters.

Source record↗
NASA NTRS1975

Terminal guidance and navigation for comet and asteroid rendezvous

A terminal guidance and navigation scheme developed in earlier work was modified and evaluated for a solar electric propulsion rendezvous mission to comet Encke. The scheme is intended for autonomous, on-board use. The guidance algorithm is based on optimal control theory and minimizes the time integrated square of thrust acceleration. The navigation algorithm employs a modified Kalman filter set in measurement variables. Random sequences were generated to simulate measurement errors, and the evaluation was conducted with detailed numerical computations which include actual motions of spacecraft and comet. The evaluations showed that the scheme attains rendezvous and maintains station after rendezvous within less than 10 km for estimated best measurements and within less than 100 km for estimated worst measurements. The measurements required are angles, range, and range rate. Angles and range appear to be absolutely necessary; range rate is not as strong a measurement type, and further modifications of the filter will allow a scheme that does not require the rate measurements.

Bennett, A. G.↗
NASA NTRS1975

Video guidance, landing, and imaging systems

The adaptive potential of video guidance technology for earth orbital and interplanetary missions was explored. The application of video acquisition, pointing, tracking, and navigation technology was considered to three primary missions: planetary landing, earth resources satellite, and spacecraft rendezvous and docking. It was found that an imaging system can be mechanized to provide a spacecraft or satellite with a considerable amount of adaptability with respect to its environment. It also provides a level of autonomy essential to many future missions and enhances their data gathering ability. The feasibility of an autonomous video guidance system capable of observing a planetary surface during terminal descent and selecting the most acceptable landing site was successfully demonstrated in the laboratory. The techniques developed for acquisition, pointing, and tracking show promise for recognizing and tracking coastlines, rivers, and other constituents of interest. Routines were written and checked for rendezvous, docking, and station-keeping functions.

Schappell, R. T.↗
NASA NTRS1974

A Functional Description of a Digital Flight Test System for Navigation and Guidance Research in the Terminal Area

A guidance, navigation, and control system, the Simulated Shuttle Flight Test System (SS-FTS), when interfaced with existing aircraft systems, provides a research facility for studying concepts for landing the space shuttle orbiter and conventional jet aircraft. The SS-FTS, which includes a general-purpose computer, performs all computations for precisely following a prescribed approach trajectory while properly managing the vehicle energy to allow safe arrival at the runway and landing within prescribed dispersions. The system contains hardware and software provisions for navigation with several combinations of possible navigation aids that have been suggested for the shuttle. The SS-FTS can be reconfigured to study different guidance and navigation concepts by changing only the computer software, and adapted to receive different radio navigation information through minimum hardware changes. All control laws, logic, and mode interlocks reside solely in the computer software.

Hegarty, D. M.↗
NASA NTRS1976

A flight investigation of a terminal area navigation and guidance concept for STOL aircraft

A digital avionics system was installed in the CV-340 transport aircraft. Flight tests were made to obtain preliminary performance data in the manual flight director mode using time controlled guidance. These tests provide a basis for selection of terminal area guidance, navigation, and control system concepts for short haul aircraft and for investigating operational procedures.

Smith, D. W.↗
NASA NTRS1976

Optical guidance vidicon test program

A laboratory and field test program was conducted to quantify the optical navigation parameters of the Mariner vidicons. A scene simulator and a camera were designed and built for vidicon tests under a wide variety of conditions. Laboratory tests characterized error sources important to the optical navigation process and field tests verified star sensitivity and characterized comet optical guidance parameters. The equipment, tests and data reduction techniques used are described. Key test results are listed. A substantial increase in the understanding of the use of selenium vidicons as detectors for spacecraft optical guidance was achieved, indicating a reduction in residual offset errors by a factor of two to four to the single pixel level.

Eiseman, A. R.↗
NASA NTRS1975

Limited variance control in statistical low thrust guidance analysis

Difficulties arise in guiding a solar electric propulsion spacecraft due to nongravitational accelerations caused by random fluctuations in the magnitude and direction of the thrust vector. These difficulties may be handled by using a low thrust guidance law based on the linear-quadratic-Gaussian problem of stochastic control theory with a minimum terminal miss performance criterion. Explicit constraints are imposed on the variances of the control parameters, and an algorithm based on the Hilbert space extension of a parameter optimization method is presented for calculation of gains in the guidance law. The terminal navigation of a 1980 flyby mission to the comet Encke is used as an example.

Jacobson, R. A.↗
NASA NTRS1975

A linear feedback guidance law for an Aeromaneuvering Orbit-to-Orbit Shuttle

The sensitivity of the trajectory of an Aeromaneuvering Orbit-to-Orbit Shuttle (AMOOS) to unpredictable variations in atmospheric density is shown and a compensating guidance law is developed. The sensitivity was determined using a varying atmosphere model whose statistical properties matched those of actual atmosphere data. This study showed that a compensating guidance law is crucial to the feasibility of AMOOS. Using an optimal regulator approach, a linear feedback law for bank angle was developed and checked out with the atmosphere model. This law uses the altitude profile of the trajectory to control the amount of energy dissipated within the atmosphere.

Rehder, J. J.↗
NASA NTRS1976

Space Shuttle Orbiter entry guidance and control system sensitivity analysis

An approach has been developed to determine the guidance and control system sensitivity to off-nominal aerodynamics for the Space Shuttle Orbiter during entry. This approach, which uses a nonlinear six-degree-of-freedom interactive, digital simulation, has been applied to both the longitudinal and lateral-directional axes for a portion of the orbiter entry. Boundary values for each of the aerodynamic parameters have been identified, the key parameters have been determined, and system modifications that will increase system tolerance to off-nominal aerodynamics have been recommended. The simulations were judged by specified criteria and the performance was evaluated by use of key dependent variables. The analysis is now being expanded to include the latest shuttle guidance and control systems throughout the entry speed range.

Stone, H. W.↗
NASA NTRS1976

Four-dimensional guidance problem with control delays

This paper, assuming steady wind and zero sideslip, presents a discrete-time mathematical model to obtain a control law and three-dimensional flight path to guide an aircraft in a given time from a given initial state (position, velocity and heading) to a prescribed final state subject to the constraints on airspeed acceleration, and pitch and bank angles of the aircraft. For ease in implementing the control law, the control inputs are assumed to be delayed and are applied in a sequential fashion. The guidance problem is formulated as a discrete nonlinear optimal control problem with time delays in dynamics and a cost functional of Bolza form. With a quadratic penalty function to handle terminal constraints on velocity and heading, a solution technique to the control problem based on conjugate gradient algorithm is investigated. Numerical examples are presented to illustrate the applicability of this approach to solution of a terminal area guidance problem in an automated air traffic control environment.

Nagarajan, N.↗
NASA NTRS1976

Effects of modifications to the space shuttle entry guidance and control systems

A nonlinear six degree of freedom entry simulation study was conducted to identify space shuttle guidance and control system software modifications which reduce the control system sensitivity to the guidance system sampling frequency. Several modifications which eliminated the control system sensitivity and associated control limit cycling were examined. The result of the modifications was a reduction in required reaction control system fuel.

Powell, R. W.↗
NASA NTRS1976

Application of redundancy in the Saturn 5 guidance and control system

The Saturn launch vehicle's guidance and control system is so complex that the reliability of a simplex system is not adequate to fulfill mission requirements. Thus, to achieve the desired reliability, redundancy encompassing a wide range of types and levels was employed. At one extreme, the lowest level, basic components (resistors, capacitors, relays, etc.) are employed in series, parallel, or quadruplex arrangements to insure continued system operation in the presence of possible failure conditions. At the other extreme, the highest level, complete subsystem duplication is provided so that a backup subsystem can be employed in case the primary system malfunctions. In between these two extremes, many other redundancy schemes and techniques are employed at various levels. Basic redundancy concepts are covered to gain insight into the advantages obtained with various techniques. Points and methods of application of these techniques are included. The theoretical gain in reliability resulting from redundancy is assessed and compared to a simplex system. Problems and limitations encountered in the practical application of redundancy are discussed as well as techniques verifying proper operation of the redundant channels. As background for the redundancy application discussion, a basic description of the guidance and control system is included.

Moore, F. B.↗
NASA NTRS1975

Guidance of an aeromaneuvering orbit-to-orbit shuttle through a statistically varying atmosphere

One candidate for a reusable upper stage to be carried by the space shuttle is an aeromaneuvering orbit-to-orbit shuttle (AMOOS). This concept uses the drag of the vehicle during a pass through the atmosphere rather than the propulsion system to slow the vehicle on a return from a high energy orbit. The nature and magnitude of the sensitivity of AMOOS to uncertainties in the properties of the atmosphere are shown. Various guidance schemes for correcting for the effects that the unpredictable variations in the atmosphere have on the trajectory are discussed. For the mission studied here, a payload retrieval from geosynchronous orbit with aerodynamic plane change, a linear feedback guidance scheme was developed. A relatively simple heuristic law was used to demonstrate the concept. Using optimal control theory a feedback law was developed analytically. Testing with a large number of different atmospheres showed this law to be a feasible means of controlling the AMOOS trajectory. Refinements to the technique offer promise of significant improvement, and these are discussed.

Rehder, J. J.↗