Search NASA⌕ Search

SEARCH · Search NASA

Results for “Galileo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Galileo probe relay receiver

For the Jovian mission, the data link from the Galileo probe to the orbiter uses suppressed-carrier Manchester encoded BPSK modulation and is protected with R = 1/2, K = 7 convolutional coding. The receiver closes the link by acquiring, tracking, and demodulating the data. It has to operate in a highly stressed environment with severe frequency offset, frequency rate, wind gust, and antenna spin conditions. Salient features are described and breadboard test data presented.

Prouty, D. A.↗
NASA NTRS1983

Galileo spacecraft inertial sensors in-flight calibration design

The successful navigation of Galileo depends on accurate trajectory correction maneuvers (TCM's) performed during the mission. A set of Inertial Sensor (INS) units, comprised of gyros and accelerometers, mounted on the spacecraft, are utilized to control and monitor the performance of the TCM's. To provide the optimum performance, in-flight calibrations of INS are planned. These calibrations will take place on a regular basis. In this paper, a mathematical description is given of the data reduction technique used in analyzing a typical set of calibration data. The design of the calibration and the inertial sensor error models, necessary for the above analysis, are delineated in detail.

Jahanshahi, M. H.↗
NASA NTRS1983

Computer predictions of ground storage effects on performance of Galileo and ISPM generators

Radioisotope Thermoelectric Generators (RTG) that will supply electrical power to the Galileo and International Solar Polar Mission (ISPM) spacecraft are exposed to several degradation mechanisms during the prolonged ground storage before launch. To assess the effect of storage on the RTG flight performance, a computer code has been developed which simulates all known degradation mechanisms that occur in an RTG during storage and flight. The modeling of these mechanisms and their impact on the RTG performance are discussed.

Chmielewski, A.↗
NASA NTRS1983

Computer memory power control for the Galileo spacecraft

The developmental history, major design drives, and final topology of the computer memory power system on the Galileo spacecraft are described. A unique method of generating memory backup power directly from the fault current drawn during a spacecraft power overload or fault condition allows this system to provide continuous memory power. This concept provides a unique solution to the problem of volatile memory loss without the use of a battery of other large energy storage elements usually associated with uninterrupted power supply designs.

Detwiler, R. C.↗
NASA NTRS1983

The Galileo probe Li/SO2 battery

NASA's Galileo mission to Jupiter will consist of an orbiter and a probe, the probe to descend through and analyze the Jovian atmosphere. All power for the probe will be supplied by three battery modules containing a total of 39 D size Li/SO2 cells that will be required to retain capacity for the duration of the mission (over 50 months) and then provide current at 3 to 4 amperes for 48 minutes. The design, development, and testing of this battery are described herein.

Marcoux, L.↗
NASA NTRS1984

Quaternions for Galileo scan platform control

The application of quaternions for the articulation control of the Galileo scan platform is presented in this paper. The purpose of selecting quaternions is to minimize onboard computation time and program size. Attention has been focused on performing inertial pointing while the spacecraft is in a dual spin configuration. Target quaternion and relative target quaternion are introduced and used to specify the target position of the scan platform for point-to-point absolute slews and mosaic relative slews, respectively. The pointing error of the platform is represented by an error quaternion which is converted into gimbal angular errors defining the attitude change. For path control, a moving target quaternion is generated; the corresponding tracking error quaternion and the related spacecraft motion compensation capability are also addressed. A sample slew case is used to demonstrate the implementation of these concepts.

Breckenridge, W. G.↗
NASA NTRS1984

Performance testing of the Galileo attitude control system

Performance testing plans, procedures, and initial results for the Galileo Attitude and Articulation Control Subsystem are described. The objectives of performance testing include test bed comparisons, examining the interactions between spacecraft dynamics and controllers, and verifying the ability to tune control algorithms in flight to meet specific performance requirements. Two primary test beds are described. One, the Integration Test Laboratory, drives actual flight hardware components and support equipment with a real time computer simulation of spacecraft dynamics. The other, the Functional Simulator, is a nonreal time computer simulation with high fidelity spacecraft dynamics, including flexible appendages, fuel slosh, and simulated hardware components. Initial Functional Simulator results are presented which illustrate spacecraft response to open loop spin-up and turn commands. A closed loop sun acquisition turn is also demonstrated. Future tests for verifying performance of attitude determination, spacecraft control, and scan platform pointing functions are outlined.

Bell, C. E.↗
NASA NTRS1984

Application of multiple input random and polyreference analysis techniques to the Galileo spacecraft modal test

An experimental modal analysis of the Galileo spacecraft was required to verify a finite element model used in loads analysis. Multiple input random and polyreference analysis techniques were applied in this program to demonstrate their effectiveness in determining the modal characteristics of a complex space structure. The methods were successful in determining an accurate set of modal data from two days of data acquisition. A complete set of results was available within 24 hours of test completion. Final analysis shows the modes from the multiple input random tests to be more complete and orthogonal than those obtained from classical sine dwell methods.

Chen, J. C.↗
NASA NTRS1984

Development of a bipropellant propulsion module for the Galileo spacecraft

The bipropellant engine retropropulsion module (RPM) of the Jupiter-exploration Galileo spacecraft provides attitude control, trajectory correction, a deep space velocity increment, a spacecraft deflection maneuver for an entry capsule, a retromaneuver for Jupiter approach, and a 'perijove raise' maneuver for the Jovian system tour of the spacecraft. Attention is given to the design features and performance capabilities of the RPM, which uses a set of 12 10-N thrusters in conjunction with a 400-N engine. Tanks contain 935 kg of propellant to satisfy mission requirements.

Hagenest, W.↗
NASA NTRS1984

Effects of the motions of a platform-mounted payload on the nutational stability of a dual-spin spacecraft - A Galileo case study

In the presence of spacecraft nutation, tracking of an inertially fixed target by the Galileo scan platform requires the use of two control loops to move the scan platform and the stator in such a way as to compensate for spacecraft motion. The effect of these control loops on spacecraft nutational stability is examined using an eigenvalue analysis approach as well as several computer analysis packages. It was found that the actions of these control loops tend to drive nutation to the point of neutralizing, and even overpowering the damping actions of the spacecraft nutation damper, for pointing directions close to the spacecraft's poles. Stable and unstable zones are mapped out for two sets of spacecraft mass properties, and contributions of rotor asymmetry and stator flexibility are also discussed.

Man, G. K.↗
NASA NTRS1984

Functional evaluation of the Galileo attitude and articulation control subsystem using FUNSIM

The functional performance of the Galileo spacecraft's attitude and articulation control subsystem is evaluated. The tests are performed utilizing the simulation program developed on an IBM 370 system known as the Functional Simulation (FUNSIM). FUNSIM is an entirely software-based simulation which uses the actual flight software in HAL/S and simulated spacecraft dynamics in FORTRAN language. A description of how the test cases were selected to verify that the algorithms perform functionally correctly, and a summary of the problems encountered are included in the paper. The benefits of having an alternative test bed such as FUNSIM to the real-time simulation test beds which utilize the spacecraft hardware components in discovering the problems are described. A sample test case which shows that the desired tasks were performed functionally correctly is included in the paper. The commands in this test are selected to start the dual-spin spacecraft initially in launch mode and lead it all the way to inertial mode. Major attitude control algorithms such as rotor and platform attitude estimators, clock and core platform attitude estimators, clock and core platform controllers, and the command turn and burn are examined.

Namiri, M. K.↗
NASA NTRS1984

An attitude reorientation algorithm for the Galileo spacecraft

This paper presents an onboard closed loop attitude reorientation algorithm for a dual-spin spacecraft, Galileo. The basic concept for the design uses the despun stator as a reference and fires a sequence of fixed duration thruster pulses to precess the angular momentum vector to its commanded orientation. The error signals used to despin the stator and to perform the turn are derived from the stator error quaternion which is computed using gyro outputs. Constraints considered in the design include gyro rate saturation, plume impingement effects, system parameter variations, as well as software reliability and flexibility. The performance of the algorithm was predicted by analysis and confirmed by computer simulation results. It was concluded that a reorientation accuracy of better than 1 milliradian with a nutation angle of less than 1 degree during the turn can be achieved.

Lin, H.-S.↗
NASA NTRS1984

Validation of the Galileo scan platform control design using DISCOS

The flexibility of the Galileo spacecraft's scan platform control system stator structure, which lies between the scan platform and one of the control actuators, has been a major design consideration. Tests have been conducted to verify the prevention of undesirable interactions between the structure and the control loop, by means of the Dynamic Interaction Simulation of Controls and Structure (DISCOS) program. The scan platform's control design has been validated for the achievement of 140-microradians maximum position deviation and 50 microradians of jitter over 1-sec intervals.

Chodas, J. L.↗
NASA NTRS1984

Constrained maneuver strategies for Project Galileo

The design of maneuvers for Project Galileo is constrained by thruster configuration, modes of thruster usage and limitations required for the safety of the spacecraft and its instruments. The methods used to analyze maneuvers with respect to these constraints is described. The velocity changes necessary for the implementation of a candidate trajectory have been studied and some general conclusions are described.

Stanford, R. H.↗
NASA NTRS1983

Galileo probe relay receiver - Acquisition and tracking

The probe-to-orbiter data link for the Jovian mission uses a Manchester encoded BPSK waveform which is demodulated by the Galileo probe relay receiver. Signal acquisition and tracking consists of a sequential probability ratio signal search, frequency acquisition with a least-squares estimator, wide-band phase lock acquisition, and a self-regulating mode control. A discrete Fourier transform serves as the basic mechanism to generate the algorithms that provide this orderly transition to phase tracking. Acquisition and tracking is addressed in this paper with emphasis on key algorithms, rationale, and theoretical/measured performance.

Von Der Embse, U. A.↗
NASA NTRS1985

Galileo battery testing and the impact of test automation

Test complexity, changes of test specifications, and the demand for tight control of tests led to the development of automated testing used for Galileo and other projects. The use of standardized interfacing, i.e., IEEE-488, with desktop computers and test instruments, resulted in greater reliability, repeatability, and accuracy of both control and data reporting. Increased flexibility of test programming has reduced costs by permitting a wide spectrum of test requirements at one station rather than many stations.

Pertuch, W. T.↗
NASA NTRS1984

Galileo spacecraft modal test and evaluation of testing techniques

The structural configuration, modal test requirements and pre-test activities involved in modeling the expected dynamic environment and responses of the Galileo spacecraft are discussed. The probe will be Shuttle-launched in 1986 and will gather data on the Jupiter system. Loads analysis for the 5300 lb spacecraft were performed with the NASTRAN code, and covered 10,000 static degrees of freedom and 1600 mass degrees of freedom. A modal analysis will be used to verify the predictions for natural frequencies, mode shapes, orthogonality checks, residual mass, modal damping and forces, and generalized forces. Verification of the validity of considering only 70 natural modes in the numerical simulation is being performed by examining the forcing functions of the analysis. The analysis led to requirements that 162 channels of accelerometer data and 118 channels of strain gage data be recorded during shaker tests to reveal areas where design changes will be needed to eliminate vibration peaks.

Chen, J.-C.↗