Search NASA⌕ Search

SEARCH · Search NASA

Results for “General Relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The orbital inclination of Cygnus XR-1 measured polarimetrically

The X-ray binary Cyg XR-1/HDE 226868 was observed polarimetrically over one orbit at three different optical wavelengths. The standard theory of Brown, et al. (1978) is used to derive an orbital inclination i = 62 deg (+5 deg, -37 deg), where the error is the 90-percent-confidence interval derived by the method of Simmons, et al. (1980). The value of the orbital inclination is significantly lower than values based on polarimetric observations. The difference is a result of the observational protocols used. A bias toward larger values of the inclination caused by the tidal distortion of the primary is still found in the present result. The inclination derived corresponds to a mass of the compact component of 6.3 solar masses, above the maximum mass of any degenerate configuration consistent with general relativity except a black hole.

Dolan, Joseph F.↗
NASA NTRS1988

Requirements and an approach for coating the Gravity Probe B gyroscope rotor

A process to coat a quartz gyroscope rotor uniformly with superconducting niobium as part of a NASA sponsored experiment to test general relativity is described. The requirements for uniformity, film adhesion, and superconducting properties of the niobium thin film rotor coating are discussed. A uniformity of 1.5 percent (peak to valley) (38 nm) with good adhesion, no pinholes larger than 0.25 mm, transition temperature of 9.8 K, and the ability to survive repeated thermal cycling to 4.2 K have been achieved. Problems concerning abrasive damage and electrical arc damage during earthbound testing have been observed. Many hours of ground-based gyro operation demonstrate the applicability of this approach to rotor coating.

Gill, D.↗
NASA NTRS1989

Superconducting gravity gradiometer mission. Volume 1: Study team executive summary

An executive summary is presented based upon the scientific and engineering studies and developments performed or directed by a Study Team composed of various Federal and University activities involved with the development of a three-axis Superconducting Gravity Gradiometer integrated with a six-axis superconducting accelerometer. This instrument is being developed for a future orbital mission to make precise global gravity measurements. The scientific justification and requirements for such a mission are discussed. This includes geophysics, the primary mission objective, as well as secondary objectives, such as navigation and tests of fundamental laws of physics, i.e., a null test of the inverse square law of gravitation and tests of general relativity. The instrument design and status along with mission analysis, engineering assessments, and preliminary spacecraft concepts are discussed. In addition, critical spacecraft systems and required technology advancements are examined. The mission requirements and an engineering assessment of a precursor flight test of the instrument are discussed.

Morgan, Samuel H.↗
NASA NTRS1989

Trailer shield assembly for a welding torch

This invention relates generally to trailer shields for gas shielded arc welding torches, and more particularly to a trailer shield assembly provided with a shield gas manifold for providing an even dispersion of shield gas to the interior of the shield assembly, which generally encloses a joint being welded and a welding trailing portion of hot welded metal. The novelty of the invention lies in providing trailer shield with a manifold tube having a plurality of openings from which shield gas is distributed. A gas manifold region ahead of the torch is also provided with shield gas from a tube to protect metal preheated by the torch. Further novelty lies in constructing portions of sides and housing and portions of side walls of the guide of stainless steel screen having a tight mesh.

Dyer, Gerald E.↗
NASA NTRS1989

Gravitational radiation as a test of relativistic gravity

Gravitational radiation can be used to test theories of gravitation. When the waves are ultimately detected directly, their speed and polarization properties can be measured and compared with predictions of alternative theories. The multipole nature of gravitational radiation was already tested in the binary pulsar, where observations of the decay of the orbit verify the quadrupole formula for gravitational radiation damping of general relativity and put strong constraints on dipole gravitational radiation predicted by many alternative theories.

Will, Clifford M.↗
NASA NTRS1989

Experimental constraints on metric and non-metric theories of gravity

Experimental constraints on metric and non-metric theories of gravitation are reviewed. Tests of the Einstein Equivalence Principle indicate that only metric theories of gravity are likely to be viable. Solar system experiments constrain the parameters of the weak field, post-Newtonian limit to be close to the values predicted by general relativity. Future space experiments will provide further constraints on post-Newtonian gravity.

Will, Clifford M.↗
NASA NTRS1989

Toward higher order tests of the gravitational interaction

Analyses and interpretations of experiments which test post-Newtonian gravity are usually done under the assumption that gravity is a metric field phenomenon - a manifestation of space-time geometry. This, however, is unnecessary and one can start at a more primitive level - that there simply exists a phenomenological, gravitational, many-body equation of motion which must be determined by a package of observations. In fact, over the last couple decades, a diverse collection of solar system interbody tracking observations, supplemented by data from the binary pulsar system PSR 1913 + 16, has completely mapped out the first post-Newtonian order. After the fact, using empirically determined equations of motion, along with some observed properties of nongravitational clocks and rulers and conservation laws for energy, momentum and angular momentum, a post-Newtonian Lagrangian can be constructed, a geometrical space-time metric field conceptual interpretation can be developed, Lorentz invariance of the equations of motion can be shown, and the equations of motion are found to agree with the predictions of Einstein's gravitational theory, General Relativity, within experimental accuracy.

Nordtvedt, Ken↗
NASA NTRS1989

LAGEOS 3 and the gravitomagnetic field

The importance of the gravitomagnetic field is discussed. A never-measured field of nature, the foundations of inertia in Einstein General Relativity, and a key role in theories of quasars and active galactic nuclei are important aspects of this field and are discussed. In high energy astrophysics, some theories of energy storage, power generation, jet formation and jet alignment of quasars and active galactic nuclei are based on the existence of the gravitomagnetic field of a supermassive black hole (Thorne et al. 1986). LAGEOS 3 is discussed in terms of laser ranged satellites to detect the gravitomagnetic field and supplementary inclination satellites to avoid gravity field uncertainties. Many experiments have been proposed to measure the gravitomagnetic field. The GPB experiment intends to measure the Lense-Thirring-Schiff precession of gyroscopes orbiting the earth. Polar satellites have been proposed to measure the Lense-Thirring precession of the orbital plane (an enormous gyroscope and two guided, drag-free, counter-rotating, polar satellites have been suggested to avoid orbital inclination errors.) The new idea to measure the gravitomagnetic drag of the nodes of two nonpolar, supplementary inclination, satellites is summarized.

Ciufolini, Ignazio↗
NASA NTRS1989

Gradiometry and gravitomagnetic field detection

Gravitomagnetism was apparently first introduced into physics about 120 years ago when major developments in electrodynamics and the strong similarity between Coulomb's law of electricity and Newton's law of gravity led to the hypothesis that mass current generates a fundamental force of gravitational origin analogous to the magnetic force caused by charge current. According to general relativity, the rotation of a body leads to the dragging of the local inertial frames. In the weak-field approximation, the dragging frequency can be interpreted, up to a constant proportionality factor, as a gravitational magnetic field. There is, as yet, no direct evidence regarding the existence of such a field. The possibility is examined of detecting the gravitomagnetic field of the Earth by gravity gradiometry.

Mashhoon, Bahram↗
NASA NTRS1989

Icarus lander

Icarus is one of the earth-crossing asteroids. It has a semi-major axis of 1.078 AU, giving it a period of 1.12 years, and an eccentricity of 0.827. The perihelion distance is thus 0.187 AU. The inclination of Icarus's orbit is 23 deg. Although it is a small body, it is still massive enough to be essentially immune to non-gravitational forces. These orbital and physical qualities make it an attractive target for testing General Relativity. The close passage to the sun means that it will be subject to a large relativistic perihelion precession; the high eccentricity makes the precession easy to measure; the high inclination allows the solar quadrupole moment (J sub 2) to be simultaneously determined via the nodal precession it predicts. The degeneracy between the relativistic effect and the effect of J sub 2 in the perihelion precession may thus be broken. Results are presented from a preliminary study of a possible trajectory design for an Icarus lander and from a covariance study of the scientific return to be expected from such a mission.

Hellings, Ronald W.↗
NASA NTRS1990

Method and apparatus for determining optical absorption and emission characteristics of a crystal or non-crystalline fiber

This invention relates generally to spectroscopy and, more particularly, to a method and apparatus for performing spectroscopic analysis of crystal and noncrystalline fibers. The invention provides a complete absorption curve for a material using a crystal fiber which can be more easily produced than the types of samples required for other methods of obtaining substantially the same absorption curve for identical materials.

Byvik, Charles E.↗
NASA NTRS1989

Middle Atmosphere Program. Handbook for MAP, volume 29. Part 1: Extended Abstracts, International Symposium on Solar Activity Forcing of the Middle Atmosphere. Part 2: MASH Workshop

The proceedings of the symposium is presented. Eight different sessions were presented: (1) Papers generally related to the subject; (2) Papers on the influence of the Quasi Biennial Oscillation; (3) Papers on the influence of the solar electromagnetic radiation variability; (4) Papers on the solar wind and high energy particle influence; (5) Papers on atmospheric circulation; (6) Papers on atmospheric electricity; (7) Papers on lower ionospheric variability; and (8) Solar posters, which are not included in this compilation.

Lastovicka, Jan↗
NASA NTRS1989

The orbital inclination of A0620 - 00 measured polarimetrically

The mass of the degenerate primary in A0620 - 00 is inferred from its spectroscopic mass function to be not less than 3.2 solar masses, making it an excellent candidate for a black hole. The exact value of the mass depends on the orbital inclination. The inclination of a binary system can be determined from the shape of its Stokes parameter light curves if the linear polarization of the system varies as a function of orbital phase. A0620 - 00 over one 8-hour binary period was observed with the 4.5-m equivalent MMT. Its polarization in the visible is variable with orbital phase. The standard theory of Brown et al. (1978) was used to derive an orbital inclination of i = 57 deg (+20 deg, -50 deg), where the error is the 90-percent confidence interval. An inclination of i = 57 deg corresponds to a mass of the compact primary of 6.6 solar masses, but the large uncertainty in the measured value of the inclination allows the derived mass of A0620 - 00 to be as low as 3.8 solar masses. If this is taken to be the maximum mass of any degenerate configuration consistent with general relativity except a black hole, then the mass of A0620 - 00 is still not well enough determined to conclude that it must be a black hole.

Dolan, Joseph F.↗
NASA NTRS1990

Test of the gravitational redshift effect at Saturn

The results of a test of the gravitational redshift effect at Saturn are reported. Measurements of the redshift were obtained with the Voyager 1 spacecraft during its encounter with Saturn in 1980. Because the spacecraft was equipped with an ultrastable crystal oscillator (USO), it is possible to test the redshift effect at an interesting level of accuracy. Assuming that radiation in the Saturn magnetosphere has had a negligible effect on the USO, the prediction of general relativity to an accuracy of 1 percent is verified. This limit could be of interest for constraining possible alternative theories of gravity.

Krisher, Timothy P.↗
NASA NTRS1989

High precision lunar tracking for laser ranging

Laser ranging to lunar surface retroreflectors has provided a valuable source of data for the investigation of the lunar orbit, the earth's orientation in space, general relativity, and many other aspects of solar system dynamics. Due to the moon's relatively large distance, and the requirement to keep the beam from the relatively low-power laser very narrow, acquiring this data type requires very accurate telescope pointing and tracking capabilities. The nominal requirement is to keep the telescope on target within approximately 1 arcsec of its predicted location for at least several minutes. An expansion of this requirement and the methods used to accomplish this high precision pointing are presented. Difficulties encountered and a few future goals of automating the McDonald station are also discussed.

Ricklefs, Randall L.↗
NASA NTRS1990

Tracking Gravity Probe B gyroscope polhode motion

The superconducting Gravity Probe B spacecraft is being developed to measure two untested predictions of Einstein's theory of general relativity by using orbiting gyroscopes; it possesses an intrinsic magnetic field which rotates with the rotor and is fixed with respect to the rotor body frame. In this paper, the path of the rotor spin axes is tracked using this trapped magnetic flux as a reference. Both the rotor motion and the magnetic field shape are estimated simultaneously, employing the higher order components of the magnetic field shape.

Keiser, George M.↗
NASA NTRS1990

Gradiometry coexperiments to the gravity probe B and step missions

The Gravity Probe-B (GP-B) spacecraft, designed to test predictions of general relativity, will fly in the mid 1990s. It will carry four electrostatically suspended gyroscopes in a cryogenic environment and will have a drag-free control system to minimize disturbances on the gyroscopes. The Stanford Test of Equivalence Principle (STEP) spacecraft, to fly later, will carry a set of test masses under very similar conditions. The possibility of using differential measurements of the GP-B gyroscopes suspension forces and the STEP tests mass displacement readout to form single-axis gravity gradiometers is explored. It is shown that the noise in the suspension systems is sufficiently small in the relevant frequency range, and that enough information is collected to compensate for the spacecrafts' attitude motion. Finally, using Breakwell's flat-earth approximation, these experiments are compared to other geodesy experiments and predict the contribution they can make to the knowledge of the Earth's geopotential.

Tapley, M.↗
NASA NTRS1990

Clevis joint for deployable space structures

This invention relates generally to pin clevis joints, and more particularly, to zero play pin clevis joints for connecting structural members of a deployable space structure. A joint includes a pin, a tang, and a shackle. The pin is tapered at the same angle as the bores extending through the projections of the shackle and the tang. A spring washer biases the tang onto the tapered sidewall of the pin. The invention solves the free play problem associated with deployable space structures by using a tapered pin which is held in tapered holes by the spring washers.

Rhodes, Marvin D.↗