Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gradient Limiters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Enhanced Habitability on High Obliquity Bodies Near the Outer Edge of the Habitable Zone of Sun-Like Stars

High obliquity planets represent potentially extreme limits of terrestrial climate, as they exhibit large seasonality, a reversed annual-mean pole-to-equator gradient of stellar heating, and novel cryospheres. A suite of 3-D global climate model simulations with a dynamic ocean is performed with Earthlike atmospheres for low and high obliquity planets with various stellar fluxes, CO2 concentrations, and initial conditions to explore the propensity for high obliquity climates approaching the outer edge of the Habitable Zone to undergo global glaciation. We also simulate planets with thick CO2 or H2 atmospheres, such as those expected to develop near or beyond the outer edge of the Habitable Zone. We show that high obliquity planets are hotter than their low obliquity counterparts due to ice-albedo feedbacks for cold climates, and water vapor in warm climates. We suggest that the water vapor greenhouse trapping is greater on high obliquity bodies due to the different dynamical regimes that occur between the two states. While equatorial ice-belts are stable at high obliquity in some climate regimes, it is harder to achieve global glaciation than for a low obliquity planet. Temperate polar conditions can be present at high obliquity at forcings for which low obliquity planets would be in a hard snowball state. We suggest the conditions on high obliquity planets are likely to be more favorable for a robust biosphere to develop approaching the outer edge of the HZ. However, the influence of obliquity diminishes for dense atmospheres, in agreement with calculations from 1-D Energy Balance Models.

planets and satellites: atmospheres↗
NASA NTRS1999

Particle Segregation in Collisional Shearing Flows

The size segregation of flowing or shaken grains is a commonly observed phenomenon in industrial processes and in nature. In systems that do not involve much agitation of the grains, several mechanisms that involve gravity have been identified as leading to such segregation. In highly agitated flows, there is a mechanism independent of gravity that is available to drive separation of different grains. This is associated with spatial gradients in the energy of their velocity fluctuations. Because collisions between grains inevitably dissipate energy, collisional granular shear flows are usually of limited extent in the direction transverse to the flow. One consequence of this is that shear flows are strongly influenced by their boundaries. Because grains, on average, slip relative to boundaries, a bumpy or frictional boundary can convert slip energy into fluctuation energy. However, because each collision between a grain and the boundary dissipates fluctuation energy, there is a competition between production and dissipation. In principle, it is possible to design the geometry of the boundary - for example, the size and spacing of the bumps - so that the boundary either produces or dissipates fluctuation energy. This permits the control of the component of the spatial gradient of the fluctuation energy that is normal to the boundary. The gradients in fluctuation energy established by such boundaries may be exploited to drive the separation by size or other properties in a binary mixture of spherical grains. Microgravity makes the visual observations possible by permitting us to employ moderate rates of shear. On earth, the effects of gravity can be minimized by shearing so rapidly that the particle pressure overwhelms gravity. However, in this event, separation takes place too rapidly for visual observation, buoyancy and/or condensation associated with the centripetal acceleration must be accounted for, and the particles can be severely damaged. Because, in the absence of gravity, the only available time scale is proportional to the speed of the moving boundary, this speed can be made arbitrarily slow to permit observations and to avoid particle damage, without altering the phenomenon under study. The primary goal of this research is to carry out a physical experiment in which particle segregation is induced and maintained in a collisional flow of a binary mixture of two different types of spheres.

Jenkins, J. T.↗
NASA NTRS2007

Modeling Creep-Induced Stress Relaxation at the Leading Edge of SiC/SiC Airfoils

Anticipating the implementation of advanced SiC/SiC composites into internally cooled airfoil components within the turbine section of future aero-propulsion engines, the primary objective of this study was to develop physics-based analytical and finite-element modeling tools to predict the effects of composite creep and stress relaxation at the airfoil leading edges, which will generally experience large thermal gradients at high temperatures. A second objective was to examine how some advanced NASA-developed SiC/SiC systems coated with typical EBC materials would behave as leading edge materials in terms of long-term steady-state operating temperatures. Because of the complexities introduced by mechanical stresses inherent in internally cooled airfoils, a simple cylindrical thin-walled tube model subjected to thermal stresses only is employed for the leading edge, thereby obtaining a best-case scenario for the material behavior. In addition, the SiC/SiC composite materials are assumed to behave as isotropic materials with temperature-dependent viscoelastic creep behavior as measured in-plane on thin-walled panels. Key findings include: (1) without mechanical stresses and for typical airfoil geometries, as heat flux is increased through the leading edge, life-limiting tensile crack formation will occur first in the hoop direction on the inside wall of the leading edge; (2) thermal gradients through all current SiC/SiC systems should be kept below approx.300 F at high temperatures to avoid this cracking; (3) at temperatures near the maximum operating temperatures of advanced SiC/SiC systems, thermal stresses induced by the thermal gradients will beneficially relax with time due to creep; (4) although stress relaxation occurs, the maximum gradient should still not exceed 300oF because of residual tensile stress buildup on the airfoil outer wall during cool-down; and (5) without film cooling and mechanical stresses, the NASA-developed N26 SiC/SiC system with thru-thickness Sylramic-iBN fiber reinforcement and a typical EBC coating has the potential of offering a maximum long-term steady-state operating temperature of approx.3100 F at the surface of the EBC.

Lang, Jerry↗
DOE OSTI2026

How exudates production along a phosphorus gradient influences mineral dissolution across contrasting soil development stages

Harnessing rhizosphere processes offers a valuable opportunity to optimize nutrient use efficiency in agroecosystems. In nutrient-limited soils, plants discharge part of photosynthate surplus via root exudation, including carboxylates, which may enhance mineral dissolution and nutrient mobilization. We aimed to assess how plant responses to nutrient limitation translated into changes in exudate profiles, and how these exudates, in turn, drive bioweathering processes across soils of contrasting mineralogy and weathering degree. We conducted a hydroponic experiment with Lupinus albus grown under five phosphorus (P) concentrations (5, 10, 20, 30, and 50 µM) over seven weeks. We measured plant biomass and root traits, performed a metabolomics analysis and quantified seven carboxylates in root exudates using gas chromatography-mass spectrometry. To assess bioweathering processes across contrasted soil domains, we conducted batch dissolution tests with exudates using three soil horizons—35 each with distinct physicochemical properties: enriched in organic matter, iron oxides, or primary silicates. At the intermediate level of P supply, shoot biomass was comparable to that under high P, but plants produced more root biomass and a higher total carboxylate exudation rate. Despite low carboxylate concentrations (<100 ppb), exudates promoted the dissolution of Ca, Mg, Si, Fe, P and K in all horizons. Yet, the degree of element released varied among horizons. These findings highlight the importance of root exudates in enhancing mineral dissolution, with effects dependent on soil physicochemical properties. The results suggest that managing agroecosystems under moderate nutrient limitation could be a sustainable strategy to increase root-to-shoot ratios, enhance bioweathering processes and nutrient release in soil solution.

Pollet, Sasha L.↗
NASA NTRS1954

Preliminary Altitude Operational Characteristics of a J57-P1 Turbojet Engine

The operational characteristics of a J57-P1 turbojet engine have been investigated at altitudes between 15,000 and 66,000 feet in the Lewis altitude wind tunnel. Included in this study is a discussion of fuel nozzle coking, the altitude operating limits with and without the standard engine control, the compressor surge characteristics, and the engine starting and windmilling characteristics. Severe circumferential turbine outlet temperature gradients which occurred at high altitude as a result of fuel nozzle coking were alleviated by the manufacturer's change in the fuel flow divider schedule and in a nozzle gasket material. Compressor air bleed is required to prevent surge of the outboard compressor in the low engine speed region. The maximum altitude at which the engine was operated without the control was about 66,000 feet at 0.8 flight Mach number and at a reduced engine speed to avoid compressor surge; with the engine control in operation, the altitude operating limit is reduced to approximately 59,000 feet. The maximum altitude at which the engine was started was about 40,000 feet.

Wallner, Lewis E.↗
DOE OSTI2025

Enhanced Boundary Layer Height Detection Using Ceilometer, Surface Meteorology, and Radiation Products With a Random Forest Ensemble Method

This study develops and evaluates a Random Forest (RF) model for estimating planetary boundary layer height (PBLH) using 9 years of data from the Atmospheric Radiation Measurement Southern Great Plains (ARM SGP) user facility, with potential application in the NOAA Surface Radiation (SURFRAD) Network. The model integrates ceilometer, surface meteorology, and radiation measurements, and is trained using thermodynamic PBLH estimates derived from radiosondes. This approach aims to bridge gaps between aerosol-based and thermodynamic-based PBLH estimates. The RF model outperformed traditional methods during daytime and better captured transition periods, demonstrating improved accuracy and robustness. At ARM SGP, it showed a substantial reduction in both bias and RMSE, with a bias near zero (−4.9 m) compared with traditional Haar Wavelet (HW) (70.9 m) and Vaisala BL-View software (124.1 m), and an RMSE of 303.2 m, lower than both BL-View (566.9 m) and HW (404.6 m). During daytime hours, RF consistently outperformed both alternatives, maintaining lower bias and RMSE across all periods. At a second evaluation site, RF achieved the lowest overall RMSE (323.7 m), similar to HW (326.4 m) and significantly better than BL-View (738.3 m). However, all models showed reduced accuracy under stable nighttime conditions, limiting the reliability of PBLH estimates. Key predictors for the model included the lifting condensation level height (LCLH), aerosol gradients, and month for seasonal variability. The study underscores the potential of integrating machine learning with multiple data sets such as surface energy and thermodynamic data to advance PBLH estimation.

boundary layer height↗
DOE OSTI2026

Sensor Reduction for Diversion Detection in a Realistic Heat Pipe Microreactor Using Supervised Machine Learning

Microreactors are designed as a smaller, cheaper, and safer alternative to traditional nuclear power plants. Their non-traditional characteristics and prospect of mass production and deployment will likely require new approaches to nuclear safeguards. The primary proliferation concern with microreactors is the diversion of fuel material. Such diversion may produce measurable defects in key physical attributes like neutron flux, which may in turn be detectable using machine learning models. Preliminary work has demonstrated this ability for modeled nominal and diversion scenarios using large quantities of energy integrated neutron flux data. In practice, the number of available sensors for such measurements will be limited and energy integrated flux information will not be available. This work explores the ability of tree-based gradient boosted ensemble models to classify a given microreactor core is nominal or diversion, and determine the number of fuel pins diverted in the case of diversion with reduced numbers of sensors and more realistic detector responses. Classification accuracy of greater than 98% and regression errors as low as 5% of the total number of fuel pins were achieved with as few as 15 sensors, compared to 99% and 4.1% with a maximum of 240 sensors.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Ion Transport in Concentrated Crosslinked Solid Polymer Electrolytes

Crosslinking polymers is a common approach to create mechanically stable solid materials such as polymer electrolytes for lithium batteries. In conventional liquid electrolytes, the solvent molecules move freely to accommodate the field-induced motion of ions. However, in crosslinked polymer electrolytes, the rearrangement of polymer segments is constrained by the deformation limits of the network. Herein, we develop a new transport model that accounts for both the formation of concentration gradients and the elasticity of the electrolyte. The elasticity is incorporated by adding an additional term related to the entropy of crosslinked strands to the electrochemical potential of the salt. The resulting Crosslink Model contains two adjustable parameters: $\mathcal{N}$, the average number of monomers in a strand, and λ crit , the maximum strain the network can sustain. These solid-like constraints produce singularities in the governing transport equations, fundamentally altering the concentration profiles. Plateaus in salt concentrations emerge near the electrodes, and network elasticity introduces a strain overpotential. When compared to a Baseline Model ($\mathcal{N}$ → ∞, equivalent to concentrated solution theory), which predicts steepest gradients near the electrodes, both models yield similar current–voltage relationships. Model predictions are compared to electrochemical data for a poly(ethylene oxide)-based crosslinked polymer electrolyte.

Patel, Vivaan [University of California, Berkeley,↗
NASA NTRS1978

Turbulent convection within rapidly rotating superadiabatic fluids with horizontal temperature gradients

A model is developed for small scale thermally driven turbulent convection in rapidly rotating systems. The Boussinesq equations of adiabatic and inviscid flow are perturbed about a basic state which is superadiabatic and which contains a horizontal temperature gradient balanced by a geostrophic wind. The growth rates and length scales of the most unstable modes are determined. It is found that these modes are either zonally or latitudinally symmetric, depending on the latitude and the horizontal temperature gradient. The transports of heat and momentum by the modes are computed. The linear amplitudes are assumed to be limited by shear instability. The model predicts a latitude dependent eddy diffusivity. The applicability of the model to astrophysical and planetary bodies is briefly discussed.

Flasar, F. M.↗
NASA NTRS1980

Baffle aperture design study of hollow cathode equipped ion thrusters

A simple theoretical model which can be used as an aid in the design of the baffle aperture region of a hollow cathode equipped ion thruster was developed. An analysis of the ion and electron currents in both the main and cathode discharge chambers is presented. From this analysis a model of current flow through the aperture, which is required as an input to the design model, was developed. This model was verified experimentally. The dominant force driving electrons through the aperture was the force due to the electrical potential gradient. The diffusion process was modeled according to the Bolm diffusion theory. A number of simplifications were made to limit the amount of detailed plasma information required as input to the model to facilitate the use of the model in thruster design. This simplified model gave remarkably consistant results with experimental results obtained with a given thruster geometry over substantial changes in operating conditions. The model was uncertain to about a factor of two for different thruster cathode region geometries. The design usefulness was limited by this factor of two uncertainty and by the accuracy to which the plasma parameters required as inputs to the model were specified.

Brophy, J. R., Jr.↗
NASA NTRS1985

Dendritic solidification. III - Some further refinements to the model for dendritic growth under an imposed thermal gradient

Some further refinements to a simple model for dendritic solidification in a binary alloy melt under an imposed positive thermal gradient are presented. Two new expressions for the dendrite tip undercooling have been obtained and shown to yield a limiting value of Delta T sub 0 and very small growth rates. Here Delta T sub 0 is the equilibrium solidification range of the alloy. At very large growth rates, all three tip undercooling expressions reach the same limiting value depending on the value of a dimensionless parameter lambda which is related to the effective diffusion distance ahead of the dendrite tip. The predicted tip undercoolings are, however, somewhat lower at intermediate growth rates. An improved calculation for the solute buildup at the dendrite tip due to curvature effects is also included.

Laxmanan, V.↗
NASA NTRS1989

Design and Navier-Stokes analysis of hypersonic wind tunnel nozzles

Four hypersonic wind tunnel nozzles ranging in Mach number from 6 to 17 are designed with the method of characteristics and boundary layer approach (MOC/BL) and analyzed with a Navier-Stokes solver. Limitations of the MOC/BL approach when applied to thick high speed boundary layers with non-zero normal pressure gradients are investigated. Working gases include ideal air, thermally perfect nitrogen and virial CF4. Agreement between the design conditions and Navier-Stokes solutions for ideal air at Mach 6 is good. Thermally perfect nitrogen showed poor agreement at Mach 13.5 and Mach 17. Navier-Stokes solutions for CF4 are not obtained, but comparison of the effects of low gamma to those of high Mach number suggests that the Navier-Stokes solution would not compare well with design.

Benton, James R.↗
NASA NTRS1990

ADRPM-VII applied to the long-range acoustic detection problem

An acoustic detection range prediction model (ADRPM-VII) has been written for IBM PC/AT machines running on the MS-DOS operating system. The software allows the user to predict detection distances of ground combat vehicles and their associated targets when they are involved in quasi-military settings. The program can also calculate individual attenuation losses due to spherical spreading, atmospheric absorption, ground reflection and atmospheric refraction due to temperature and wind gradients while varying parameters effecting the source-receiver problem. The purpose here is to examine the strengths and limitations of ADRPM-VII by modeling the losses due to atmospheric refraction and ground absorption, commonly known as excess attenuation, when applied to the long range detection problem for distances greater than 3 kilometers.

Shalis, Edward↗
NASA NTRS1990

Low-frequency ionization-driven instability of a discrete auroral arc model

The low-frequency (time scales of tens of seconds) dynamics of the auroral ionosphere differs from that of the nonauroral ionosphere by the presence of strong, unstable space- and time-dependent ionospheric ionization produced by precipitating auroral electrons. If recombination is relatively unimportant (as at high ionospheric heights), it is shown that, in general, transport processes cannot remove this ionization as fast as it is created, and no equilibrium is possible. These nonequilibrium phenomena are investigated in the context of a nonlinear adiabatic auroral model, which has previously been studied in static situations. A linearized local perturbation analysis is given of what amounts to a current-driven E x B gradient-drift instability with an ionization source, as well as some exact nonlinear solutions valid in a finite but limited spatial region. These solutions show continuing motion of auroral potential and plasma density, as the aurora tries to shift its ionization problems from one place to another. The analysis gives clues to the possibility of generation of chaos and of fine-scale spatial structure.

Cornwall, John M.↗
NASA NTRS1991

Hypersonic flows as related to the National Aerospace plane

Experimental data for a series of 2-D and 3-D shock wave/boundary layer interaction flows at Mach 8.2 are presented. The test bodies, composed of simple geometric shapes fastened to a flat plate test bed, were designed to generate flows with varying degrees of pressure gradient, boundary layer separation, and turning angle. The data include surface pressure and heat transfer distributions as well as limited mean flowfield surveys both in the undisturbed and interaction regimes. The data are presented in a convenient form to be used to validate existing or future computational models of these hypersonic flows.

Kussoy, Marvin↗
NASA NTRS1992

Study of FES/CAST/HGS

The microgravity materials processing program has been instrumental in providing the crystal growth community with an experimental environment to better understand the phenomena associated with the growing of crystals. In many applications one may pursue the growth of large single crystals which cannot be grown on earth due to convective driven flows. A microgravity environment is characterized by neither convection of buoyancy. Consequently superior crystals are able to be grown in space. On the other hand, since neither convection nor buoyancy dominates the fluid flow in a microgravity environment, then lesser dominating phenomena can affect crystal growth, such as surface driven flows or diffusion limited solidification. In the case of experiments that are to be flown in space using the Fluid Experiments System (FES), diffusion limited growth should be the dominating phenomenon. The use of holographic and Schlieren optical techniques for studying the concentration gradients in solidification processes has been used by several investigators over the years. The Holographic Ground System (HGS) facility at MSFC has been a primary resource in researching this capability. Consequently scientific personnel have been able to utilize these techniques in both ground based research and in space experiments. An important event in the scientific utilization of the HGS facilities was the TGS (triglycine sulfate) Crystal Growth and the Casting and Solidification Technology (CAST) experiments that were flown on the International Microgravity Lab (IML) mission in March of this year. The preparation and processing of these space observations are the primary experiments reported in this work. This project provides some ground-based studies to optimize on the holographic techniques used to acquire information about the crystal growth processes flown on IML. Since the ground-based studies will be compared with the space-based experimental results, it is necessary to conduct sufficient ground based studies to best determine how the experiment in space worked. The current capabilities in computer based systems for image processing and numerical computation have certainly assisted in those efforts. As anticipated, this study has certainly shown that these advanced computing capabilities are helpful in the data analysis of such experiments.

Workman, Gary L.↗
NASA NTRS1994

An application of a two-equation model of turbulence to three-dimensional chemically reacting flows

A numerical study of three dimensional chemically reacting and non-reacting flowfields is conducted using a two-equation model of turbulence. A generalized flow solver using an implicit Lower-Upper (LU) diagonal decomposition numerical technique and finite-rate chemistry has been coupled with a low-Reynolds number two-equation model of turbulence. This flow solver is then used to study chemically reacting turbulent supersonic flows inside combustors with synergetic fuel injectors. The reacting and non-reacting turbulent combustor solutions obtained are compared with zero-equation turbulence model solutions and with available experimental data. The hydrogen-air chemistry is modeled using a nine-species/eighteen reaction model. A low-Reynolds number k-epsilon model was used to model the effect of turbulence because, in general, the low-Reynolds number k-epsilon models are easier to implement numerically and are far more general than algebraic models. However, low-Reynolds number k-epsilon models require a much finer near-wall grid resolution than high-Reynolds number models to resolve accurately the near-wall physics. This is especially true in complex flowfields, where the stiff nature of the near-wall turbulence must be resolved. Therefore, the limitations imposed by the near-wall characteristics and compressible model corrections need to be evaluated further. The gradient-diffusion hypothesis is used to model the effects of turbulence on the mass diffusion process. The influence of this low-Reynolds number turbulence model on the reacting flowfield predictions was studied parametrically.

Lee, J.↗
NASA NTRSDate not supplied

Laser Forming of Sheet Metal for In-Space Manufacturing Applications

As the in-space economy matures, the migration of typically Earth-bound manufacturing methods, such as metal forming and joining, up to space will be required to meet the increasing demand for refueling and supply depots, habitats, laboratories, lunar surface structures, and sites for deep-space exploration shipbuilding. Only in this way can the magnitude of individual structures begin to exceed what can be launched, deployed, docked, or inflated and allow true economies of scale to be unlocked in space. However, typical terrestrial methods of forming and shaping sheet metal require massive machinery with the ability to deflect reaction forces to a large mass in a fixed reference frame (Earth). To both limit up-mass required for manufacture and to mitigate the issues of reaction forces in the relative reference frames of space, a non-contact, laser-based method of forming metal sheet is proposed. NASA Marshall Space Flight Center (MSFC), in cooperation with DARPA and the University of Florida (UF), have begun investigation of non-contact methods of laser forming sheet metal in thermal vacuum (TVAC) conditions to great success. To date, several grades of aluminum, stainless steel, and titanium coupons have been formed via laser-induced internal stresses in these metals at both ambient atmosphere and vacuum conditions. Temperatures in these tests ranged from -120 to 60 C, and though the total energy required to induce strain does vary with workpiece temperature and environmental pressure, the method remains predictable and controllable for the materials investigated. It is believed that this method will revolutionize manufacturing in-space as it not only continues to build upon the capabilities of the laser (sensing, marking, cutting, drilling, joining, and now forming) as an all-in-one tool, but also reduces the need to counteract forming forces as would be required in mechanical bending. In theory, all required stress to induce bending is generated through thermal gradient and strain within the workpiece, meaning that the need for reaction control and fuel expense on-orbit will be limited. Archimedes once stated, “Give me a lever long enough and a fulcrum on which to place it, and I shall move the world”. With a laser as our lever and our workpiece its own fulcrum, we can move the world’s manufacturing into space.

Laser↗