Search NASA⌕ Search

SEARCH · Search NASA

Results for “Grain microstructure evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Capture efficiency and bias from the defect dynamics near grain boundaries in BCC Fe using mesoscale simulations

The capture efficiency describes the capability of a sink, such as a grain boundary (GB), dislocation, and void, to absorb point defects (PDs). The bias defines the difference in capture efficiency between the absorption of a vacancy and dumbbell at a sink. Complete kinetic information on PDs, including diffusion barriers and diffusion orientations, as well as accurate saddle points, are needed to determine the capture efficiency and bias at a sink accurately, which is computationally demanding. Here, in the present study, the Self-Evolving Atomistic Kinetic Monte Carlo (SEAKMC) method was used to investigate the defect dynamics of PDs near different types of grain boundaries (GBs) (with both $\langle$100$\rangle$ and $\langle$110$\rangle$ families) accurately in body-centered cubic (BCC) iron (Fe). The capture efficiency, sink strength, and bias factor of different types of GBs were determined in Fe, which, different from traditional rate theory estimation, showed a distinct capture efficiency, sink strength, and bias in different GBs. The results demonstrate a strong positive correlation between the capture efficiency and the GB strain width, instead of the GB misorientation, GB energy, or GB-PD binding energy, which have been investigated previously. This work provides valuable insight into the radiation-induced microstructural evolution of GBs.

36 MATERIALS SCIENCE↗

Interstitial hydrogen enhances the mobility of some grain boundaries in tungsten

Segregation of interstitials at a grain boundary (GB) is known to generally lower its mobility. This phenomenon, called 'solute-drag', has important ramifications on the process of recrystallization and microstructural evolution. Here, we present predictions from molecular dynamics (MD) simulations which demonstrate that interstitial hydrogen in tungsten can in fact increase the mobility of some GBs which exhibit shear coupling. Assuming a disconnection-based mechanism, activation energies and pre-factors for disconnection nucleation are predicted from simulations of shear-coupled motion. In GBs where enhanced mobility is predicted, interstitial H reduces both the activation energy and the pre-factor for disconnection nucleation, thus effectively increasing the mobility. For GBs with diminished mobility, MD predicts that presence of interstitial H reduces the pre-factor and, in some cases, increases the activation energy. The reduction in the activation energy inferred from MD simulations are confirmed by nudged elastic band calculations. Temperature-dependent structural transitions are observed for some GBs, and the effect of interstitial H is found to change with the changes in structure. The effect of interstitial H is predicted to be complex and highly variable, providing some plausible explanations for experimental observations on the recrystallization of tungsten in presence of H-loaded plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The evolution history of superalloy powders during hot consolidation and plastic deformation

Highlights: • Element segregations in a powder metallurgy superalloy at different states are identified. • The surface energy drives precipitation of oxides, carbides, and γ' particles on powder surface during hot consolidation. • Prior particle boundary structure is distorted and more uniformly refined grains are obtained after hot extrusion. - Abstract: Powder metallurgy superalloys are widely used to produce critical rotating parts in turbine engines. However, the issues like what is the driving force of precipitation on prior particle boundary (PPB) during consolidation and how the PPB structure evolves during plastic deformation still remain to be resolved. In this study, with the characterization of the microstructure evolution from powder, consolidation, to plastic deformation, the segregation of alloying elements on the particle boundaries at elevated temperature was analyzed by equilibrium thermodynamic calculations, and the distortion of PPB structure under large plastic deformation was quantitively simulated by finite element (FE) methods. The results indicated that surface energy serves as the main driving force of PPB precipitation and hot extrusion could distort the PPB structure and yield more uniformly refined grains.

36 MATERIALS SCIENCE↗

Microstructural and magnetic characterization of iron precipitation in Ni-Fe-Al alloys

The influence of annealing on the microstructural evolution and magnetic properties of Ni{sub 50}Fe{sub x}Al{sub 50-x} alloys for x = 20, 25, and 30 has been investigated. Solidification microstructures of as-cast alloys reveal coarse grains of a single B2 type {beta}-phase and typical off eutectic microstructure consisting of proeutectic B2 type {beta} dendrites and interdendritic eutectic for x = 20 and x > 20 at.% Fe respectively. However, annealing at 1073 K results in the formation of FCC {gamma}-phase particles along the grain boundaries as well as grain interior in x = 20 at.% Fe alloy. The volume fraction of interdentritic eutectic regions tend to decrease and their morphologies start to degenerate by forming FCC {gamma}-phase for x > 20 at.% Fe alloys with increasing annealing temperatures. Increasing Fe content of alloys induce an enhancement in magnetization and a rise in the Curie transition temperature (T{sub C}). Temperature scan magnetic measurements and transmission electron microscopy reveal that a transient rise in the magnetization at temperatures well above the T{sub C} of the alloys would be attributed to the precipitation of a nano-scale ferromagnetic BCC {alpha}-Fe phase. Retained magnetization above the Curie transition temperature of alloy matrix, together with enhanced room temperature saturation magnetization of alloys annealed at favorable temperatures support the presence of ferromagnetic precipitates. These nano-scale precipitates are shown to induce significant precipitation hardening of the {beta}-phase in conjunction with enhanced room temperature saturation magnetization in particular when an annealing temperature of 673 K is used. - Research Highlights: {yields} Evolution of microstructure and magnetic properties with varying Fe content. {yields} Transient rise in magnetization via the formation of ferromagnetic phase. {yields} Enhancements in saturation magnetization owing to precipitated ferromagnetic phase. {yields} Nanoscale precipitation of ferromagnetic BCC {alpha}-Fe confirmed by TEM. {yields} Hardness of the {beta}-phase correlates with room temperature saturation magnetization.

36 MATERIALS SCIENCE↗

Transient Rheological Behavior of Semisolid SEED-Processed 7075 Aluminum Alloys in Rapid Compression

The transient rheological behavior and microstructure evolution of semisolid SEED-processed 7075 aluminum alloys were studied using the rapid compression tests. The effects of the TiB{sub 2} grain refinement on the grain morphology and size of semisolid slurries were investigated. Results indicated that the grain refiner could reduce the grain size and improve the globularity of α-Al grains. The grain-refined alloy can be easily deformed at a wide range of solid contents (0.42 to 0.53 Fs), in which the deformation level appears to be independent from the solid content. Under the transient state, the apparent viscosity decreased with increasing shear rate to a minimum value and followed by an increase as the shear rate decreased. The apparent viscosity of the base alloy exhibited a dependency on the solid content, while the apparent viscosity of the grain-refined alloy in the decreasing or increasing shear rate periods was not substantially influenced by the solid content. The viscosity as a function of applied shear rate can be described using the power law viscosity model. The differences in the flow behavior index (n) and the consistency index (k) for two alloys were discussed.

36 MATERIALS SCIENCE↗

An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal–Plasticity Model

Nimonic 101 is one of the early nickel-based superalloys developed for the use in gas turbines. In such environments, the material is exposed to a combination of both high temperatures and mechanical loads for a long duration. Hence, thermal creep is of the utmost concern as it often limits service life. This study focuses on creep tests, carried out on Nimonic 101 at different temperatures under a constant tensile load of 735 MPa. To characterize the microstructural evolution, electron backscatter diffraction (EBSD) measurements were employed before and after loading. At higher temperatures, a significant change of the microstructure was observed. The grains elongated and aligned their orientation along the load axis. In parallel, a crystal plasticity material model has been set up in the classical large deformation framework. Modeling results are compared to the acquired EBSD data.

36 MATERIALS SCIENCE↗

Thermomechanical Behavior of Biocompatible Austenitic Stainless Steels during Simulated Torsion Tests

The thermomechanical behavior and the microstructural evolution during the hot deformation are important aspects of metal alloys during hot forging and rolling processes. Here, the correlation between dynamically recrystallized grain size (d{sub DRX}), steady-state stress (σ{sub ss}) and Zener–Hollomon (Z) parameter is investigated according to the Universal Derby–Ashby relationship. Specimens of a UNS S 31673 and a UNS S 31675 steels, used in the manufacture of orthopedic implants, were subjected to continuous isothermal torsion tests. A strain of 3.0 and strain rates of 0.01, 0.1, 1.0 and 10 s{sup −1} at temperatures of 1000, 1100 and 1200 °C, were employed. The results showed that the competition between the hardening and dynamic softening (i.e., recovery and recrystallization) mechanisms, as depicted by the flow curves, agreed with the Derby relation. This observation is also a consequence of the variation in the stacking fault energy (SFE) with the applied strain. Additionally, the influence of the hot deformation parameters on the shape of the curves and the grain refinement is governed by the balance between these thermally activated mechanisms.

36 MATERIALS SCIENCE↗

Microstructure of adiabatic shear bands in Ti6Al4V

Microstructural deformation mechanisms in adiabatic shear bands in Ti6Al4V are studied using traditional TEM and selected area diffraction, and more advanced microstructural characterisation techniques such as energy dispersive X-ray spectroscopy, high angle annular dark field STEM and conical dark field TEM. The shear bands under investigation are induced in Ti6Al4V samples by high strain rate compression of cylindrical and hat-shaped specimens in a split Hopkinson pressure bar setup. Samples from experiments interrupted at different levels of deformation are used to study the evolution of the microstructure in and nearby the shear bands. From the early stages of adiabatic shear band formation, TEM revealed strongly elongated equiaxed grains in the shear band. These band-like grains become narrower towards the centre of the band and start to fraction even further along their elongated direction to finally result in a nano-crystalline region in the core. In fully developed shear bands, twins and a needle-like martensite morphology are observed near the shear band. - Highlights: Black-Right-Pointing-Pointer CDF can resolve the nanostructure of an ASB. Black-Right-Pointing-Pointer Nanometre-sized grains well below 100 nm are present in the shear band. Black-Right-Pointing-Pointer Highly fractioned regions inside ASB contain both {alpha} and {beta} phases. Black-Right-Pointing-Pointer Strong deformation yields {alpha} twins and martensite morphology. Black-Right-Pointing-Pointer The microstructure of the ASB in both samples is similar.

36 MATERIALS SCIENCE↗

The microwave effects on the properties of alumina at high frequencies of microwave sintering

Microwave sintering of materials has attracted much research interest because of its significant advantages (e.g. reduced sintering temperatures and soaking times) over the conventional heating. Most researchers compared processes that occurred during the microwave and conventional heating at the same temperature and time. The enhancements found in the former method are indicated as a 'non-thermal effect' which is usually used for explaining the phenomena in microwave processing. Numerous recent studies have been focused on the effect to elucidate the microwave interaction mechanism with materials. Moreover, recent progress on microwave sources such as gyrotrons has opened the possibility for processing materials by using a higher microwave frequency. Therefore, the technology is expected to exhibit a stronger non-thermal effect. This paper presents results from a series of experiments to study the non-thermal effect on microwave sintered alumina. Sintering by using a wide rage of microwave frequencies up to 300 GHz as well as a conventional furnace was carried out. The linear shrinkages of samples for each sintering method were measured. Pores and grains taken from scanning electron microstructure (SEM) images of cut surfaces were also examined. The results of a comparative study of the shrinkages and microstructure evolutions of the sintered samples under annealing in microwave heating systems and in an electric furnace were analyzed. A notably different behavior of the shrinkages and microstructures of alumina after being annealed was found. The results suggested that microwave radiations provided an additional force for mass transports. The results also indicated that the sintering process depended on microwave frequencies.

36 MATERIALS SCIENCE↗

Crack Initiation Behavior of Cold-Worked Alloy 690 in Simulated PWR Primary Water - Role of Starting Microstructure, Applied Stress and Cold Work on Precursor Damage Evolution

Long-term stress corrosion crack (SCC) initiation behavior in Alloy 690 is being evaluated by constant load tensile testing in simulated pressurized water reactor primary water. Seven commercial Alloy 690 heats with different starting microstructures and cold-work levels are being tested at either 90% or 100% of the material yield stress. Previous studies have revealed grain boundary (GB) cavity formation after 7,110 to 9,220 hours of exposure in certain thermally treated (TT) Alloy 690 heats in highly cold-worked (CW) conditions, serving as precursors to intergranular cracks. This paper summarizes the new characterization results for the evolution of GB cavities in four Alloy 690TT heats in 21% and 31%CW conditions loaded at yield stress after 18,400 hours of exposure. Link-up of GB cavities has led to formation of long internal creep cracks, resulting in crack initiation detected by direct current potential drop in a highly CW Alloy 690TT heat with uniform, semi-continuous distribution of small GB carbides. In comparison, highly CW materials featuring larger and more widely spaced GB carbides did not show a significant increase in GB cavity density or size. Quantitative assessments were performed on GB cavity evolution in highly CW specimens for two Alloy 690TT heats demonstrating the strong dependence of GB cavity evolution on applied stress and starting GB microstructure.

Zhai, Ziqing↗

Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression

Highlights: • DRX kinetic model is developed for the aged AZ91D magnesium alloy. • The DRX behavior in different strained regions was investigated. • Four morphologies of the second phase were proposed during the hot compression tests. • The nucleation mechanisms of the DRX grains were clarified. - Abstract: The flow behavior of as-cast AZ91D magnesium alloy was evaluated by isothermal compression tests within the temperatures of 220 °C, 260 °C, 300 °C, 340 °C, and 380 °C, and the strain rates of 0.001, 0.01, 0.1, 1 and 10s{sup −1}. Based on the stress-strain curve and hyperbolic sine function, the thermal activation energy and the strain rate sensitivity of the material were determined to be 142.2726 kJ·mol{sup −1} and 0.142, respectively. The S type evolution of the dynamic recrystallization with the increasing strain that dynamic recrystallization (DRX) model obtained from stress and strain data. There was a good consistency between the proposed DRX kinetics model and microstructure observation results. Combining isothermal compression specimens with finite element and scanning electron microscopy (SEM) analysis indicated that the sample can be divided into rarely recrystallized region, partially recrystallized region and completely recrystallized region, which falls within the dense deformation zone, free deformation zone and severe deformation zone, respectively. The different forms of the β-Mg{sub 17}Al{sub 12} phase induced by compression tests were confirmed by SEM. Nucleation mechanisms of the DRX were discussed with reference to the transmission electron microscope (TEM) analysis results.

36 MATERIALS SCIENCE↗

Sensitivity of cellular automata grain structure predictions for high solidification rates

Understanding as-solidified grain structure development during constrained (G 0) alloy solidification conditions is a necessary component of understanding the larger process-microstructure relationships during additive manufacturing (AM) processing. This study applies a cellular automata (CA) model, for static solidification velocities and thermal gradients on the order of those expected in AM melt pools, to investigate grain shape development across ranges of input parameters governing temperature field evolution, nucleation, and growth. Variation in nucleated grain shape from columnar to equiaxed as a function of thermal gradient and nucleation density is modeled with CA and verified against the established transition model of Hunt and Gaumann. Furthermore, while thermal conditions and nucleation density are shown to have the largest roles on microstructure development, the sensitivity of grain structure was very unevenly distributed across parameter space. In particular, it was found that microstructure is very sensitive to mean nucleation undercooling and the interfacial response function in process space regimes near grain structure transitions, but entirely controlled by a combination of thermal gradient, solidification velocity, and nucleation density away from such transitions. The understanding of grain shape sensitivity obtained through CA modeling, particularly at large thermal gradient and nucleation density, will be necessary for accurate microstructure prediction during the extreme processing conditions and large input parameter uncertainty common to AM.

36 MATERIALS SCIENCE↗

Effect of deformation path on microstructure, microhardness and texture evolution of interstitial free steel fabricated by differential speed rolling

This paper reports the effect of the deformation path on the microstructure, microhardness, and texture evolution of interstitial free (IF) steel processed by differential speed rolling (DSR) method. For this purpose, total height reductions of 50% and 75% were imposed on the samples by a series of differential speed rolling operations with various height reductions per pass (deformation levels) ranging from 10 to 50% under a fixed roll speed ratio of 1:4 for the upper and lower rolls, respectively. Microstructural observations using transmission electron microscopy and electron backscattered diffraction measurements showed that the samples rolled at deformation level of 50% had the finest mean grain size (∼ 0.5 μm) compared to the other counterparts; also the samples rolled at deformation level of 50% showed a more uniform microstructure. Based on the microhardness measurements along the thickness direction of the deformed samples, gradual evolution of the microhardness value and its homogeneity was observed with the increase of the deformation level per pass. Texture analysis showed that, as the deformation level per pass increased, the fraction of alpha fiber and gamma fiber in the deformed samples increased. The textures obtained by the differential speed rolling process under the lubricated condition would be equivalent to those obtained by the conventional rolling. - Highlights: • Effect of DSR deformation path on microstructure of IF steel is significant. • IF steel rolled at deformation level of 50% has the ultrafine grains of ∼ 0.5 μm. • Rolling texture components are pronounced with increasing deformation level.

36 MATERIALS SCIENCE↗

Phase-field modeling for restructuring in the dark zone of high burnup UO 2

This report summarizes the mesoscale modeling work performed in fiscal year 2024 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to capture the microstructural evolution and restructuring observed in the dark regions of high burnup UO 2 nuclear fuel. This is the first attempt to realistically simulate the restructuring behavior observed in different region of a high burnup fuel. We employ a grand-potential based phase-field model to concurrently evaluate the formation of subgrains and growth of fission bubbles within the fuel. A energy-based subgrain formation criteria is introduced to simulate the restructuring process. Effect of different initial conditions and different modeling parameters are studies systematically to capture how each of these parameters influence the characteristics of the restructured fuel. It is observed that the subgrain formation begins around existing fission gas bubbles and then proceeds towards triple junctions, grain boundaries and grain interiors. It is demonstrated that restructuring is influenced by a combination of initial dislocation densities, subgrain formation rate, and temperature. Rate of restructuring increases with increase in fuel temperature. A restructuring bias is observed within the microstructure due to variation in defect accumulation among different grains. Furthermore, bubble sizes and distribution does not have a significant effect on rate of restructuring. The predicted microstructures resembles the characteristics of the restructured regions as observed in experiments. Finally, a correlation is presented that demonstrates the evolution of the restructuring volume fraction as a function of local effective burnup. This work provides a first of its kind restructuring model for darkzone that can be used by BISON for performance prediction of high burnup UO 2 fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Elucidating the phase transformations and grain growth behavior of O3-type sodium-ion layered oxide cathode materials during high temperature synthesis

Understanding the formation mechanism of layered oxide cathodes via solid-state synthesis is imperative to achieving controllability over their materials properties and electrochemical behaviors. In this work, we investigate the phase and microstructure evolution during the synthesis of NaNi 1/3 Fe 1/3 Mn 1/3 O 2 , a model sodium-ion layered oxide cathode, using a combination of imaging, diffraction, and spectroscopic techniques. We unravel the synthetic mechanistic pathways involved in the high-temperature calcination reaction, as well as elaborate the synthesis-microstructure-performance relationship of this material. The formation of the final layered oxide phase involves a gradual transformation through a sodiated oxyhydroxide intermediate. During the reaction, the precursor dehydration reaction dominates at 250–550 °C, while the major sodiation reaction occurs at 550–850 °C. Alongside multiple stages of phase transformations, the final grain structure formation occurs through the continuous growth of the (003) and (104) facets. During the reaction, Mn acts as the charge-compensating element and exhibits depth-dependent characteristics. When the sodiation reaction dominates over dehydration, the reaction intermediates undergo gradual electronic structure changes with increasing temperature, as indicated by the spectral features of TM3d-O2p hybrid states. Calcination duration is also a critical parameter governing the microstructure, surface reactivity, phase fraction distribution and electrochemical performance of the material. The optimal calcination duration was determined to be 18 hours at 850 °C under the conditions evaluated here. Calcination beyond this duration was found to be detrimental to electrochemical performance due to Na and O loss and heterogeneous sodium distribution throughout the particles. Our work sheds light on the complex crystallographic-chemical-microstructural evolution of sodium ion layered oxide cathodes and provides insight into precisely tuning material properties which are intimately linked to battery performances.

25 ENERGY STORAGE↗

Microstructural Stability During Creep Exposure of 9Cr-1Mo Steel Treated at Different Normalization Temperatures

A modified 9Cr-1Mo steel has been exposed to three separate austenitization temperatures, i.e., at 950, 1025, and 1100 °C for normalization. After subsequent tempering at 750 °C, the normalized and tempered samples were creep-tested at temperatures of 550, 600, and 650 °C. The creep strength of the investigated samples was evaluated in terms of minimum creep strain rate and time to rupture. The effects of microstructure, precipitate and boundary misorientation on the creep behavior of the samples have been studied with TEM and EBSD analyses. Further, the evolution of crystallographic texture after creep tests has also been studied. The presence of an intermediate size of martensitic microstructural units (i.e., prior-austenite grain, martensitic packets, etc.) and combination of fine coherent and incoherent Nb(C,N) precipitates has provided superior creep strength for the samples normalized at 1025 °C, when these are subsequently subjected to low-temperature (i.e., 550 °C) and high-temperature (i.e., 650 °C) creep tests, as compared to other conditions of normalizing heat treatment.

36 MATERIALS SCIENCE↗

Dolomites in hydrated fine-grained Antarctic micrometeorites: Effective tools for analyzing secondary processes

We report detailed transmission electron microscope (TEM) observations of carbonates from one hydrated fine-grained Antarctic micrometeorite (H-FgMM). These carbonates show the occurrence of complex chemical variations and microstructures that provide important evidence regarding the formation and evolution of rarely analyzed H-FgMMs. The chemical variations were identified at both micrometer and nanometer scales, indicating that these carbonates formed under localized fluid conditions that suggest a variable chemical microenvironment. Individual carbonates grew from isolated reservoirs of fluid. Moreover, these carbonates contain manganese amounts almost twice as high as those measured in CM chondrites but similar to those identified in CI chondrites. Their particular compositions indicate reducing and progressively evolving conditions in the fluid from which these carbonates precipitated, probably due to water consumption during phyllosilicates formation. In addition to the compositional variability, microstructural features are pervasive in these carbonates, similar to those described in heavily shocked meteorites indicating that these carbonates were probably modified during shock processes after their formation. Since carbonates are highly susceptible to shock metamorphism, we suggest that it is essential to investigate their structure in detail before interpreting the isotopic measurements related to the time of their formation. Additionally, associated with carbonates, ubiquitous phosphates were identified in the micrometeorite analyzed. Future studies of these mineral associations will provide us further insight into the formation and evolution of asteroids, especially since they were both identified in the surface materials of Ryugu and Bennu.

58 GEOSCIENCES↗

Flash Sintering of Oxide Ceramics under Microwave Heating

We report on the results of the analysis of the effect of flash sintering, which is observed upon heating compacted powder materials by high-intensity microwave radiation. Ceramic samples of Y{sub 2}O{sub 3}, MgAl{sub 2}O{sub 4}, and Yb: (LaO){sub 2}O{sub 3} were sintered to a density exceeding 98–99% of the theoretical value during 0.5–5 min without isothermal hold. The specific microwave power absorbed volumetrically in the samples was 20–400 W/cm{sup 3}. Based on the analysis of the experimental data (microwave radiation power and heating and cooling rates) and of the microstructure of the obtained materials, we propose a mechanism of flash sintering based on the evolution of the thermal instability and softening (melting) of the grain boundaries. The proposed mechanism also explains the flash sintering effect observed when a dc or a low-frequency ac voltage is applied to the samples. The microwave heating makes it possible to implement flash sintering without using electrodes for supplying energy to the articles being sintered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗