Search NASA⌕ Search

SEARCH · Search NASA

Results for “ISOTOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Isotopic discrimination of natural and anthropogenic perchlorate sources in groundwater in a semi-arid region of northeastern Oregon (USA)

Perchlorate (ClO 4 - ) has synthetic and natural sources. Synthetic ClO 4 - is released to the environment from its use as an oxidant in military and aerospace applications, and from its presence in a variety of common commercial products, such as safety flares, chlorate herbicides, and fireworks. Natural sources of ClO 4 - in the environment include imported nitrate fertilizers derived from salt deposits in the Atacama Desert of Chile and indigenous natural ClO 4 - that accumulates in unsaturated soils and groundwaters in other arid and semi-arid environments, largely from atmospheric deposition. The stable isotope ratios of chlorine ( 37 Cl/ 35 Cl) and oxygen ( 18 O/ 16 O, 17 O/ 16 O) and the isotopic abundance of radioactive 36 Cl in ClO 4 - can be used to discriminate these different sources. Perchlorate was previously detected at relatively high concentrations (3.8–34.7 μg/L) in groundwater from many wells in the Boardman-Umatilla area near the Columbia River in northeastern Oregon, which is a semi-arid, highly agricultural, heavily irrigated area that includes several past and current military installations. Eight representative groundwater wells were sampled throughout this region and isotopic characteristics of ClO 4 - collected from each well were measured along with other chemical and isotopic parameters including tritium and other groundwater age indicators. We report isotopic data indicate that indigenous natural ClO 4 - was present in groundwater from all sampled wells and was the predominant source in five of the wells. Synthetic ClO 4 - was present in the three remaining wells with natural ClO 4 - , and a minor fraction of Atacama-fertilizer-derived ClO4- was indicated in one of the wells. Data from this study expand the geographic area of the USA in which indigenous natural ClO 4 - has been detected to include the semi-arid northwest. This study also illustrates the role of irrigation recharge as a mechanism for producing relatively high concentrations of indigenous natural ClO 4 - in groundwater by flushing accumulated salts from the unsaturated zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Can Zn isotopes in sediments record past eutrophication of freshwater lakes? A pilot study at Lake Baldegg (Switzerland)

In this study, the speciation and isotopic composition of Zn were traced across the sediments of a freshwater lake that experienced one hundred years of strong eutrophication, in order to assess the potential of sedimentary Zn isotopes to record such an environmental disturbance. Here, the results indicate that the sedimentary Zn isotope signal varied with the change from pre-eutrophic to eutrophic conditions in the investigated lake. The average δ 66 Zn JMC value of the dominantly allochthonous lithogenic sediments deposited during the pre-eutrophic period was +0.27‰ ±0.05‰ (i.e. similar to the δ 66 Zn JMC value of +0.28‰ ±0.05‰ proposed for Bulk Silicate Earth), while enhanced autochthonous biochemical sedimentation during the eutrophic period resulted in significantly lower δ 66 Zn JMC values down to +0.04‰ ±0.06‰. Synchrotron-based X-ray absorption spectroscopy data revealed a concomitant change in Zn speciation from a dominant fraction of Zn in clay minerals during the pre-eutrophic period to a major fraction of Zn in ZnS during the eutrophic period. A linear regression relating the sedimentary Zn isotope signal to the fraction of Zn in ZnS indicated δ 66 Zn JMC values of +0.27‰ ±0.06‰ and 0.00‰ ±0.08‰ for Zn in clay minerals and in ZnS, respectively. The enrichment of light Zn in ZnS in the eutrophic sediments is tentatively attributed to enhanced biological uptake of light Zn in the water column, which resulted in an enhanced flux of organic-bound Zn towards the sediments and further transformation of organic Zn into ZnS upon biomass mineralization during early diagenesis. This hypothesis is in agreement with the fractionation towards lighter Zn reported for both biological uptake of Zn and ZnS precipitation. The results of this study emphasize the potential of sedimentary Zn isotopes to register past eutrophic periods in freshwater lakes, and thus to serve as a probe of paleo-environmental conditions and/or past land use at the catchment scale.

58 GEOSCIENCES↗
DOE OSTI2022

Tungsten and molybdenum isotopic evidence for an impact origin of pallasites

The origin of pallasites—stony-iron meteorites mainly composed of olivine and Fe-Ni metal—is debated and proposed formation scenarios broadly range from models that explain pallasite formation by internal processes in the mantle of a differentiated planetesimal to those that involve impact–induced mixing of core and mantle materials. Here, the origin of pallasites is examined by studying the nebular source regions of their precursor material using Mo isotopes and their history of metal-silicate segregation using Hf-W chronometry. We report new Mo and W isotopic data for a large suite of pallasite metal samples, alongside Pt isotope data to quantify superimposed cosmic ray exposure effects. Most main-group pallasites exhibit uniform pre-exposure 182 W and Mo isotopic compositions that bear an excellent similarity to those of IIIAB iron meteorites. Four main-group pallasites and the IIIAB iron Thunda have more radiogenic pre-exposure 182 W compositions, but display the same Mo isotopic composition as other main-group pallasites and IIIAB irons. This strong chronological and genetic link strongly suggests that main-group pallasite metal originated in the IIIAB parent body core. This, combined with prior Pd-Ag chronometric evidence for an early collisional disruption of the IIIAB parent body, implies that main-group pallasites formed by impact–induced mixing of metal and silicates rather than by an internal process on the IIIAB parent body. This mixing led to elevated 182 W compositions in some pallasites, which are best accounted for by partial re-equilibration of IIIAB metal with radiogenic 182 W from the colliding body. Altogether, our results support models that explain main-group pallasite formation by injection of pallasite metal into the mantle of another differentiated body, implying that pallasite silicates did not primarily derive from the IIIAB mantle, but instead from that of the colliding body.

58 GEOSCIENCES↗
DOE OSTI2025

Assessing the fidelity of shallow-water carbonates as records of the Ni isotope composition of surface seawater

Nickel is a bioessential metal that is used in enzymes important to the C, N, and O cycles, and changes in its marine abundance and bioavailability may have affected the evolutionary trajectory of early life. Changes over time in the Ni isotope composition (δ 60 Ni) of surface seawater, which reflects biological demand for Ni, could allow for the reconstruction of the dynamics of Ni demand over Earth’s history, but this approach would require geologic records of surface seawater. Here, we investigate the fidelity of shallow-water carbonates as a record of the Ni isotope composition of surface seawater by determining how Ni is first partitioned into natural carbonates and then how post-depositional processes influence the Ni signal. Our samples come from the Great Bahama Bank, which is a well-studied, modern carbonate platform often used to study ancient platforms. We found that Ni is fractionated from seawater upon incorporation into carbonates capturing shallow (<18 cm), recent deposition (0.1 ‰–0.4 ‰ lighter than seawater). Variation among these [Ni] and δ 60 Ni values may be controlled by variation in mineral proportions. Meteoric diagenesis shifts δ 60 Ni to lower values, which we attribute to isotopically light meteoric fluids. In contrast, carbonates that experienced sediment-buffered marine diagenesis with respect to Ca isotopes and Sr/Ca ratios do not appear to differ in δ 60 Ni values from sediments generally representative of their initial deposition. The sensitivity of δ 60 Ni to diagenetic reset in these samples appears comparable to the sensitivities of Ca isotopes and Sr/Ca ratios, to first order. Thus, in general, carbonates that experienced sediment-buffered marine diagenesis with respect to these elements may hold the most promise as a record of the δ 60 Ni of coeval surface seawater. Additionally, we use our results to infer that the fraction of Ni removed from seawater into carbonates is less than 10 % of the total Ni output from the global oceans and incorporation of this Ni sink into global biogeochemical models will only have a minor impact on the modeled modern Ni budget.

Great Bahama Bank carbonates↗
DOE OSTI2024

Isotope exchange of ND 3 on Pt catalyst-loaded 13X molecular sieve

During D-T fusion operations the capture, purification, and recycling of unburned tritium will be crucial, as the formation of tritium containing molecules require additional processing. Here, removing the tritium can require costly processing to be unbound from the tritium-containing molecules and improvements to these processes will be necessary moving forward. Existing techniques using sorbent material beds to remove tritium-containing molecules from process gas streams undergo repeated high-heat cycling which leads to diminished bed lifespans, necessitating replacement and associated downtime. This work demonstrates the capture and isotopic exchange technique of deuterated ammonia (ND3), used as a surrogate for tritium, at ambient temperature using a Pt catalyst-loaded 13X molecular sieve. Unmodified 13X molecular sieve is capable of adsorbing and retaining the ND3 however, incorporation of a catalyst facilitates the isotopic exchange of the hydrogen isotopes. The effluent gas streams were analyzed in conjunction with desorbed ammonia isotopologues post-exchange to verify these results. Isotopically exchanging and removing heavier hydrogen isotopes using this technique provides an alternative to traditional removal methods.

08 HYDROGEN↗
DOE OSTI2026

Elucidating hydrogen isotope transport mechanisms in proton-conducting ceramics with trapping effects using TMAP8

Hydrogen isotopes play an central role in many science and engineering applications such as fuel cells, hydrogen production, and fusion energy. For these applications, hydrogen separation and extraction applications are pivotal aspects of hydrogen transports, where proton-conducting ceramics (PCCs) have shown great potential. In this study, we propose a new model for hydrogen isotope transport in PCC materials, BaZr 0.9 Y 0.1 O 2.95 (BZY) in particular, which captures behavior in both dry and wet environments. The model expands previous efforts and considers diffusion, trapping, and surface reactions (i.e., dissociation and recombination). We then validate and calibrate the model using deuterium transport measurements from experiments in both dry and wet environments. This study highlights the key role of trapping, often neglected, on hydrogen isotope transport in BZY and other PCC materials. It also explains how the commonly observed discrepancy between dry and wet behavior can be attributed to more active surface reactions and saturated traps due to the increased hydrogen presence under the wet environment. These results provide insights to optimize PCC manufacturing and usage as a hydrogen separation and extraction technology in various fields, emphasizing that lowering the trapping can reduce hydrogen isotope retention. These modeling and calibration efforts are performed using the tritium migration analysis program, version 8 (TMAP8), an open-source application designed for hydrogen isotope transport.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Using stable isotopes to inform water resource management in forested and agricultural ecosystems

Present and future climatic trends are expected to markedly alter water fluxes and stores in the hydrologic cycle. In addition, water demand continues to grow due to increased human use and a growing population. Sustainably managing water resources requires a thorough understanding of water storage and flow in natural, agricultural, and urban ecosystems. Measurements of stable isotopes of water (hydrogen and oxygen) in the water cycle (atmosphere, soils, plants, surface water, and groundwater) can provide information on the transport pathways, sourcing, dynamics, ages, and storage pools of water that is difficult to obtain with other techniques. However, the potential of these techniques for practical questions has not been fully exploited yet. Here, we outline the benefits and limitations of potential applications of stable isotope methods useful to water managers, farmers, and other stakeholders. We also describe several case studies demonstrating how stable isotopes of water can support water management decision-making. Finally, we propose a workflow that guides users through a sequence of decisions required to apply stable isotope methods to examples of water management issues. We call for ongoing dialogue and a stronger connection between water management stakeholders and water stable isotope practitioners to identify the most pressing issues and develop best-practice guidelines to apply these techniques.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Accurate determination of uranium isotope abundances by wavelength modulation spectroscopy in atomic beams

The design and demonstration of an optical analysis system based on wavelength modulation spectroscopy in an atomic beam for uranium isotope abundance determinations is presented. This system probes the uranium 5f 3 6d7s 2 ( 5 L 6 ) → 5f 2 6d 2 7s 2 ( 5 K 5 ) transition at 861.031 nm, which is considered to be the most suitable transition for uranium isotopic analysis. A new laser characterization strategy was developed for the conditions where optimum laser wavelength modulation depth was small compared to the free spectral range (FSR) of etalons. Two capabilities enabled the higher-precision determination of isotope abundances of atomic beams: (1) reduction of low-frequency additive noise, especially the noise caused by black-body radiation and (2) suppression of non-absorption transmission losses. The performance of this system was validated with uranium samples of various isotopic compositions. Further, by comparing the measurements using natural uranium samples between the direct absorption and the wavelength modulation approaches, a 21-fold decrease in uncertainty of the integrated absorbance and a 6.8-fold improvement in the 1-σ precision of the number density were achieved. In addition, by comparing the results using uranium oxide samples, a 6.1-fold decrease in the uncertainty of inferred isotope abundance was obtained. These results demonstrate that the 1f-normalized 2f wavelength modulation spectroscopy (WMS-2f/1f) technique enables higher-precision analysis of atomic beams.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

InterCarb: A Community Effort to Improve Interlaboratory Standardization of the Carbonate Clumped Isotope Thermometer Using Carbonate Standards

Abstract Increased use and improved methodology of carbonate clumped isotope thermometry has greatly enhanced our ability to interrogate a suite of Earth‐system processes. However, interlaboratory discrepancies in quantifying carbonate clumped isotope (Δ 47 ) measurements persist, and their specific sources remain unclear. To address interlaboratory differences, we first provide consensus values from the clumped isotope community for four carbonate standards relative to heated and equilibrated gases with 1,819 individual analyses from 10 laboratories. Then we analyzed the four carbonate standards along with three additional standards, spanning a broad range of δ 47 and Δ 47 values, for a total of 5,329 analyses on 25 individual mass spectrometers from 22 different laboratories. Treating three of the materials as known standards and the other four as unknowns, we find that the use of carbonate reference materials is a robust method for standardization that yields interlaboratory discrepancies entirely consistent with intralaboratory analytical uncertainties. Carbonate reference materials, along with measurement and data processing practices described herein, provide the carbonate clumped isotope community with a robust approach to achieve interlaboratory agreement as we continue to use and improve this powerful geochemical tool. We propose that carbonate clumped isotope data normalized to the carbonate reference materials described in this publication should be reported as Δ 47 (I‐CDES) values for Intercarb‐Carbon Dioxide Equilibrium Scale.

58 GEOSCIENCES↗
DOE OSTI2024

Using an Isotope Enabled Mass Balance to Evaluate Existing Land Surface Models

Abstract Land surface models (LSMs) play a crucial role in elucidating water and carbon cycles by simulating processes such as plant transpiration and evaporation from bare soil, yet calibration often relies on comparing LSM outputs of landscape total evapotranspiration ( ET ) and discharge with measured bulk fluxes. Discrepancies in partitioning into component fluxes predicted by various LSMs have been noted, prompting the need for improved evaluation methods. Stable water isotopes serve as effective tracers of component hydrologic fluxes, but data and model integration challenges have hindered their widespread application. Leveraging National Ecological Observation Network measurements of water isotope ratios at 16 US sites over 3 years combined with LSM‐modeled fluxes, we employed an isotope‐enabled mass balance framework to simulate ET isotope values ( δET ) within three operational LSMs (Mosaic, Noah, and VIC) to evaluate their partitioning. Models simulating δET values consistent with observations were deemed more reflective of water cycling in these ecosystems. Mosaic exhibited the best overall performance (Kling‐Gupta Efficiency of 0.28). For both Mosaic and Noah there were robust correlations between bare soil evaporation fraction and error (negative) as well as transpiration fraction and error (positive). We found the point at which errors are smallest ( x ‐intercept of the multi‐site regression) is at a higher transpiration fraction than is currently specified in the models. Which means that transpiration fraction is underestimated on average. Stable isotope tracers offer an additional tool for model evaluation and identifying areas for improvement, potentially enhancing LSM simulations and our understanding of land‐surface hydrologic processes.

58 GEOSCIENCES↗
DOE OSTI2022

The NEON Daily Isotopic Composition of Environmental Exchanges Dataset

The National Ecological Observatory Network (NEON) provides open-access measurements of stable isotope ratios in atmospheric water vapor (δ 2 H, δ 18 O) and carbon dioxide (δ 13 C) at different tower heights, as well as aggregated biweekly precipitation samples (δ 2 H, δ 18 O) across the United States. These measurements were used to create the NEON Daily Isotopic Composition of Environmental Exchanges (NEON-DICEE) dataset estimating precipitation (P; δ 2 H, δ 18 O), evapotranspiration (ET; δ 2 H, δ 18 O), and net ecosystem exchange (NEE; δ 13 C) isotope ratios. Statistically downscaled precipitation datasets were generated to be consistent with the estimated covariance between isotope ratios and precipitation amounts at daily time scales. Isotope ratios in ET and NEE fluxes were estimated using a mixing-model approach with calibrated NEON tower measurements. NEON-DICEE is publicly available on HydroShare and can be reproduced or modified to fit user specific applications or include additional NEON data records as they become available. The NEON-DICEE dataset can facilitate understanding of terrestrial ecosystem processes through their incorporation into environmental investigations that require daily δ 2 H, δ 18 O, and δ 13 C flux data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Elephant range and population, strontium isotopes, and genetics combine to give local-scale specificity to ivory hotspot tracking

We use Sr isotopes to increase the precision of DNA-based origin estimates of wildlife products. Population information is used to develop Sr isotope Elephant Polygons that are overlaid onto the region of origin identified by DNA assignment to determine the sources of seized ivory samples. Our approach is cognizant of isotope mixing due to isotope turnover within animals and also of the large home range of elephants or other mobile species. Genetic information from 3 different law enforcement ivory seizures suggests a region of origin confined to Kenya and Tanzania in eastern Africa. We determine characteristic 87 Sr/ 86 Sr ratios for each of 25 different Elephant Polygons within this region using analyses of more the 600 known-origin reference samples. Using both the 87 Sr/ 86 Sr ratios of the seized ivory samples and elephant population estimates from individual Elephant Polygons we find that at least 75 % of the samples likely came from a single Elephant Polygon which includes the Tsavo National Parks in Kenya and the Mkomazi National Park in Tanzania. A few samples may have come from other regions, most likely from Tanzania. This study illustrates the value of combining genetics, isotope geochemistry, and population surveys in wildlife forensics studies.

Africa↗
DOE OSTI2025

The FRIB Decay Station: New Horizons with Rare Isotopes

In May 2022, the Facility for Rare Isotope Beams (FRIB), located on the campus of Michigan State University (MSU), began delivering exotic isotopes to an international community of scientists. New discoveries are now being reported from radioactive decay of neutron-rich nuclei near N = 20 and N = 28.FRIB is expected to produce roughly 80% of the unstable or radioactive isotopes predicted to exist up to uranium (Z = 92). The new user facility is supported by the U.S. Department of Energy, and it is operated by MSU. A high-power superconducting linear accelerator, shaped like a paper-clip, drives the production of these rare isotopes by colliding stable nuclei moving at half the speed of light with a rotating, water-cooled graphite tar-get. These collisions cause the primary stable beam to fragment into a wide variety of unstable nuclei, which can be subsequently filtered through a multistage magnetic separator, the Advanced Rare Isotope Separator, and transported to one of several experimental stations. The FRIB Decay Station initiator (FDSi) (see Figure 1) was developed to enable comprehensive radio-active decay studies of the exotic nuclei produced by FRIB and it was used in the first two experiments in 2022. Further, the FDSi is a highly reconfigurable multidetector system with two focal planes (FP1 for discrete spectroscopy and FP2 for total absorption spectroscopy) that can be optimized for the specific science goals of each experiment. It is designed, built, and operated by a community of users with the sup-port of U.S. funding agencies, including the Department of Energy and National Science Foundation.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Heavy ion beam physics at Facility for Rare Isotope Beams

The Facility for Rare Isotope Beams (FRIB) will be the world's premier rare-isotope beam facility. Experiments with the majority (~80%) of the isotope predicted to exist will become available. The FRIB facility is based on a superconducting (SC) heavy ion linac with output energy above 200 MeV/u for any ions at beam power of 400 kW. FRIB includes a target facility for in-flight production of rare isotopes. A three-stage fragment separator will be used to prepare fast rare isotope beams with high-purity for nuclear physics experiments. The installation work of the accelerator and experimental systems is approaching completion and multi-stage beam commissioning activities started in summer 2017 with expected project completion in early 2022. In conclusion, the commencement of operation for users' experiments is planned immediately following the project completion.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Discriminating Uranium Isotopes Based on Fission Signatures Induced by Delayed Neutrons

The use of active interrogation to induce delayed neutron emission is a well-established technique for the characterization of special nuclear materials. Delayed neutrons have isotope-characteristic spectral and temporal signatures, which provide the basis for isotope identification. However, in bulk materials that contain an appreciable fissile (e.g., 235 U or 233 U) fraction, such as highly enriched uranium (HEU), delayed neutrons have a high probability of inducing additional fissions. As a result, the overall delayed neutron signature consists of two distinct components: the “primary” delayed neutrons (emitted directly by fission fragments) and the “secondary prompt” fission neutrons produced in fission induced by primary delayed neutrons. These prompt products differ from “primary” delayed neutrons both in their energy spectra and in the presence of coincident radiation released by the parent fission event. The presence and relative quantity of prompt products from delayed fission depend on the cross section of the material in the energy range of delayed neutrons, which may differ significantly between isotopes, thus providing an exploitable means for isotope differentiation. Here, we demonstrate two experimental approaches for discriminating between 235 U and 238 U isotopes based on the measurement of delayed neutron-induced fission products. First, HEU and depleted uranium objects are differentiated through the detection of high-energy prompt neutrons from delayed fission using both recoil-based organic liquid scintillators and thermalization spectra from a custom-built capture-gated composite detector. Secondly, coincident radiation measurements are used as the basis for discrimination by comparing the overall rates and time evolution of fission events when delayed neutrons are present.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Observation of new neutron-rich isotopes in the vicinity of Zr 110

Neutron-rich radioactive isotope (RI) beams in the vicinity of 110 Zr were produced using the in-flight fission of a 345-MeV/nucleon 238 U beam at the RIKEN Radioactive Isotope Beam Factory. Here, the RI beams were separated in flight by the large-acceptance two-stage fragment separator BigRIPS. Isotopes were clearly identified in a low-background particle-identification plot, which was obtained from the measurements of time of flight, magnetic rigidity, and energy loss using beam-line detectors placed in the BigRIPS separator and the ZeroDegree spectrometer. Nine new isotopes, 101 Br, 102 Kr, 105,106 Rb, 108 Sr, 110,111 Y, 114 Zr, and 117 Nb, are reported for the first time, with their measured production cross sections compared with the extrapolations of lighter isotopes down to the femtobarn regime.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Observation of New Isotopes in the Fragmentation of Pt 198 at FRIB

Five previously unknown isotopes ( 182,183 Tm, 186,187 Yb, 190 Lu) were produced, separated, and identified for the first time at the Facility for Rare Isotope Beams (FRIB) using the Advanced Rare Isotope Separator (ARIS). The new isotopes were formed through the interaction of a 198 Pt beam with a carbon target at an energy of 186 MeV/u and with a primary beam power of 1.5 kW. Event-by-event particle identification of A, Z, and q for the reaction products was performed by combining measurements of the energy loss, time of flight, magnetic rigidity Bρ, and total kinetic energy. The ARIS separator has a novel two-stage design with high resolving power to strongly suppress contaminant beams. Finally, this successful new isotope search was performed less than one year after FRIB operations began and demonstrates the discovery potential of the facility which will ultimately provide 400 kW of primary beam power.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

TRINIDI: Time-of-Flight Resonance Imaging With Neutrons for Isotopic Density Inference

Accurate reconstruction of 2D and 3D isotope densities is a desired capability with great potential impact in applications such as evaluation and development of next-generation nuclear fuels. Neutron time-of-flight (TOF) resonance imaging offers a potential approach by exploiting the characteristic neutron absorption spectra of each isotope. However, it is a major challenge to compute quantitatively accurate images due to a variety of confounding effects such as severe Poisson noise, background scatter, beam non-uniformity, absorption non-linearity, and extended source pulse duration. We present the TRINIDI algorithm which is based on a two-step process in which we first estimate the neutron flux and background counts, and then reconstruct the areal densities of each isotope and pixel. Both components are based on the inversion of a forward model that accounts for the highly non-linear absorption, energy-dependent emission profile, and Poisson noise, while also modeling the substantial spatio-temporal variation of the background and flux. Further, to do this, we formulate the non-linear inverse problem as two optimization problems that are solved in sequence. We demonstrate on both synthetic and measured data that TRINIDI can reconstruct quantitatively accurate 2D views of isotopic areal density that can then be reconstructed into quantitatively accurate 3D volumes of isotopic volumetric density.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗