Search NASA⌕ Search

SEARCH · Search NASA

Results for “Injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Assessment of steam-injected gas turbine systems and their potential application

Results were arrived at by utilizing and expanding on information presented in the literature. The results were analyzed and compared with those for simple gas turbine and combined cycles for both utility power generation and industrial cogeneration applications. The efficiency and specific power of simple gas turbine cycles can be increased as much as 30 and 50 percent, respectively, by the injection of steam into the combustor. Steam-injected gas turbines appear to be economically competitive with both simple gas turbine and combined cycles for small, clean-fuel-fired utility power generation and industrial cogeneration applications. For large powerplants with integrated coal gasifiers, the economic advantages appear to be marginal.

Stochl, R. J.↗

Effects of argon ion injections in the plasmasphere

In lifting massive space power system payloads from low Earth orbit to geosynchronous Earth orbit, Cargo Orbit Transfer (COTV) using ion propulsion will inject energetic beams of argon ions into the plasmasphere. The relationship of the beam velocity to Alfven and thermal velocities as a function of radial distance in the plasmasphere is given for positions near the Earth's equatorial plane. A beam sheath loss model is used which results in a deposition of argon ions and hence energy in the plasmasphere which is much less than that in models calling for clouds or plasma instabilities to rapidly stop the beam. A comparison is given of the cumulative fractional mass loss of an ion beam injected at 1.5 R for the ion cloud and the ion beam sheath loss process. The integrated difference of these two deposition models is shown for the construction of one SPS.

Curtis, S. A.↗

Plasma injection events at synchronous orbit related to positive Dst

AST 6 spacecraft synchronous orbit measurements are compared with space and ground data in a study of plasma effects related to SI and SC magnetic perturbations. It is found that synchronous orbit plasma injections related to the sudden phenomena are similar to those associated with substorms, although the former occur at all local times. The synchronous orbit plasma injections are interpreted as the co-location of particle boundaries on an inward propagating front and the compression magnetic pulse associated with SI and SC events is seen as responsible for the co-location of the boundaries and their inward propagation. The positive Dst magnetic pulse plays a role similar to that of the magnetic tail reconfiguration pulse associated with substorms, and evidence is shown that positive Dst enhances magnetospheric convection independently of interplanetary magnetic field direction

Arnoldy, R. L.↗

Plasma injection and transport in the mid-altitude polar cusp

DE-1 hot plasma observations in the mid-altitude polar cusp have shown evidence of a significant velocity filtering phenomenon which is consistent with a latitudinally narrow region of plasma injection located at a geocentric distance of about eight earth radii (in a dipole approximation). Plasma convection from the injection region into the polar cap results in a V-shaped log E vs. observed pitch angle relation at geocentric distances near 4 earth radii. This velocity filtering effect allows the measurement of much smaller flow velocities (about 10 km/sec) than have heretofore been possible with hot plasma measurements. The flows thus determined are consistent with ionospheric flows measured nearly simultaneously by the DE-2 spacecraft, although the magnitudes of the higher altitude flows are higher by a factor of 2 or more than an approximately r to the 3/2 power dipole-field mapping would predict.

Burch, J. L.↗

Three-dimensional turbulent-mixing-length modeling for discrete-hole coolant injection into a crossflow

Three dimensional mixing length models of a flow field immediately downstream of coolant injection through a discrete circular hole at a 30 deg angle into a crossflow were derived from the measurements of turbulence intensity. To verify their effectiveness, the models were used to estimate the anisotropic turbulent effects in a simplified theoretical and numerical analysis to compute the velocity and temperature fields. With small coolant injection mass flow rate and constant surface temperature, numerical results of the local crossflow streamwise velocity component and surface heat transfer rate are consistent with the velocity measurement and the surface film cooling effectiveness distributions reported in previous studies.

Wang, C. R.↗

Pulse evolution and mode selection characteristics in a TEA-CO2 laser perturbed by injection of external radiation

A grating-tunable TEA-CO2 laser with an unstable resonator cavity, modified to allow injection of CW CO2 laser radiation at the resonant transition line by means of an intracavity NaCl window, has been used to study the coupling requirements for generation of single frequency pulses. The width and shape of the mode selection region, and the dependence of the gain-switched spike buildup time and the pulse shapes on the intensity and detuning frequency of the injected radiation are reported. Comparisons of the experimental results with previously reported mode selection behavior are discussed.

Flamant, P. H.↗

Mode selection and frequency tuning by injection in pulsed TEA-CO2 lasers

An analytical model characterizing pulsed-TEA-CO2-laser injection locking by tunable CW-laser radiation is presented and used to explore the requirements for SLM pulse generation. Photon-density-rate equations describing the laser mechanism are analyzed in terms of the mode competition between photon densities emitted at two frequencies. The expression derived for pulsed dye lasers is extended to homogeneously broadened CO2 lasers, and locking time is defined as a function of laser parameters. The extent to which injected radiation can be detuned from the CO2 line center and continue to produce SLM pulses is investigated experimentally in terms of the analytical framework. The dependence of locking time on the detuning/pressure-broadened-halfwidth ratio is seen as important for spectroscopic applications requiring tuning within the TEA-laser line-gain bandwidth.

Flamant, P. H.↗

The feasibility of water injection into the turbine coolant to permit gas turbine contingency power for helicopter application

It is pointed out that in certain emergency situations it may be desirable to obtain power from a helicopter engine at levels greater than the maximum rating. Yost (1976) has reported studies concerning methods of power augmentation in the one engine inoperative (OEI) case. It was found that a combination of water/alcohol injection into the inlet and overtemperature/overspeed could provide adequate emergency power. The present investigation is concerned with the results of a feasibility study which analytically investigated the maximum possible level of augmentation with constant gas generator turbine stress rupture life as a constraint. In the proposed scheme, the increased engine output is obtained by turbine overtemperature, however, the temperature of the compressor bleed air used for hot section cooling is lowered by injecting and evaporating water.

Van Fossen, G. J.↗

VLF wave injections from the ground

Experiments on wave-particle interactions using VLF whistler-mode waves injected into the magnetosphere from Antartica are described. The injected signals are single-frequency coherent waves whose amplitudes and frequencies may be changed slowly with time, or else two or more coherent wave trains transmitted simultaneously to determine the nature of the response to multifrequency excitation. The waves may be amplified 30 dB or more and may trigger intense emissions having bandwidths that vary from a few to several hundred Hertz. In most cases significant growth and triggering occur only when the driving signal is essentially monochromatic (bandwidth 10 Hz). If two frequencies are transmitted simultaneously the signal at the lower frequency tends to be suppressed by 20 dB or more. These results are interpreted in terms of a feedback interaction between the waves and counter-streaming cyclotron resonant electrons in a region several hundred wavelengths long, centered on the magnetic equator.

Helliwell, R. A.↗

Electron beam injection experiments - Replication of flight observations in a laboratory beam plasma discharge

Recent electron beam injection experiments in the lower ionosphere have produced two perplexing results: (1) At altitudes from 140 km to 220 km, the beam associated 391.4 nm intensity is relatively independent of altitude despite the decreasing N2 abundance. (2) The radial extent of the perturbed region populated by beam associated energetic electrons significantly exceeds the nominal gyrodiameter for 90 deg injection. A series of laboratory measurements is described in which both of these flight results appear to have been closely reproduced. The laboratory results are reasonably consistent with the transition from a collision dominated to collisionless beam-plasma discharge configuration.

Bernstein, W.↗

Sulfur dioxide - Episodic injection shows evidence for active Venus volcanism

Pioneer Venus ultraviolet spectra from the first 5 years of operation show a decline (by more than a factor of 10) in sulfur dioxide abundance at the cloud tops and in the amount of submicron haze above the clouds. At the time of the Pioneer Venus encounter, the values for both parameters greatly exceeded earlier upper limits. However, Venus had a similar appearance in the late 1950's, implying the episodic injection of sulfur dioxide possibly caused by episodic volcanism. The amount of haze in the Venus middle atmosphere is about ten times that found in earth's stratosphere after the most recent major volcanic eruptions, and the thermal energy required for this injection on Venus is greater by about an order of magnitude than the largest of these recent earth eruptions and about as large as the Krakatoa eruption of 1883. The episodic behavior of sulfur dioxide implies that steady-state models of the chemistry and dynamics of cloud-top regions may be of limited use.

Esposito, L. W.↗

Injection module thrust vector control

A three-axis controlled Injection Module propelled by a Star 48 solid rocket motor has been considered for use as a final 'kick' stage to supplement the Inertial Upper Stage in a proposed launch option for the Galileo and International Solar Polar missions. A flight control law for the Injection Module is developed. A position plus rate control law is considered, with integral, path guidance, and derived rate terms added for improved pointing accuracy and fuel efficiency. Selection of control gains is accomplished with the help of analytical limit cycle expressions and verified by computer simulation of the closed loop system. A computer simulation of the flight control system is built around a rigid spacecraft model with gyro dynamics and thruster delays included. Models for pitch/yaw/roll disturbance torques are included. Through simple gain changes the proposed flight control law is shown to accommodate the widely different mass properties of the Galileo and International Solar Polar spacecraft. Pointing accuracies of better than the desired 0.2 degrees are achieved.

Bell, C. E.↗

Temporal evolution of whistler growth in a cold plasma injection experiment

The evolution of whistler mode turbulence and particle participation in a cold plasma release are studied experimentally as part of the Active Magnetospheric Particle Tracers Explorer (AMPTE) program. The investigation used a simple time dependent cold plasma density model, and an atypical ambient radiation belt was assumed. It is shown that a cold lithium injection in the AMPTE parameter range can give rise to whistler mode turbulence with significant gain to the wave amplitude in a single pass through a flux tube. Whistler mode growth results in the pitch angle diffusion of energetic electrons, which are in turn precipitated. The rate of power input into the ionosphere from these precipitating electrons is roughly estimated at 2 ergs per sq cm/s. It is found that this value of the precipitated power is large enough to continue producing a visible aurora until the injected plasma in the flux tube is lost or destroyed by magnetospheric convection or other processes.

Ganguli, G.↗

Ion resonances and ELF wave production by an electron beam injected into the ionosphere - ECHO 6

Two effects observed with electron antennas ejected from a sounding rocket launched into the ionosphere in March 1983 carrying electron beam guns are discussed. The sensor packages were ejected and travelled parallel to the vehicle trajectory. Electric potentials were measured between the single probes and a plasma diagnostic package while the gun injected electrons into the ionosphere in perpendicular and parallel 1 kHz directions. Signal pulses over the dc-1250 kHz range were detected. A kHz gun frequency caused a signal that decreased by two orders of magnitude between 45-90 m from the beam field line. However, the signal was detectable at 1 mV/m at 120 m, supporting earlier data that indicated that pulsed electron beams can cause ELF waves in space. Beam injection parallel to the magnetic field produced an 840 Hz resonance that could be quenched by activation of a transverse beam.

Winckler, J. R.↗

Transport of ions in presence of induced electric field and electrostatic turbulence - Source of ions injected into ring current

The transport of ions from the polar ionosphere to the inner magnetosphere during stormtime conditions has been computed using a Monte Carlo diffusion code. The effect of the electrostatic turbulence assumed to be present during the substorm expansion phase was simulated by a process that accelerated the ions stochastically perpendicular to the magnetic field with a diffusion coefficient proportional to the energization rate of the ions by the induced electric field. This diffusion process was continued as the ions were convected from the plasma sheet boundary layer to the double-spiral injection boundary. Inward of the injection boundary, the ions were convected adiabatically. By using as input an O(+) flux of 2.8 x 10 to the 8th per sq cm per s (w greater than 10 eV) and an H(+) flux of 5.5 x 10 to the 8th per sq cm per s (w greater than 0.63 eV), the computed distribution functions of the ions in the ring current were found to be in good agreement, over a wide range in L (4 to 8), with measurements made with the ISEE-1 satellite during a storm. This O(+) flux and a large part of the H(+) flux are consistent with the DE satellite measurements of the polar ionospheric outflow during disturbed times.

Cladis, J. B.↗

Double-injection, deep-impurity switch development

The overall objective of this program was the development of device design and process techniques for the fabrication of a double-injection, deep-impurity (DI) sup 2 silicon switch that operates in the 2-10 kV range with conduction current values of 5 A at 2 kV and 1 A at 10 kV. Other major specifications include a holding voltage of 10 V with no gate current, 10 microsec switching time, and power dissipation of 50 W at 75 C. It was decided to concentrate on the lateral circular devices in order to optimize the gold diffusion. This resulted in devices that are much better switches (approx.1 micro sec switching time), and in a gold diffusion process that is much more controllable than those previously developed. Some results with injection-gated devices were also obtained. The current conduction for V less than VT was analyzed and seen to agree, for the most part, with Lampert's theory. Various sections of this report describe the device designs, wafer-processing techniques, and various measurements which include ac and dc characteristics and four-point probe.

Whitson, D. W.↗