Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integral Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Monolithic ATF MiniFuel Sample Capsules Ready for HFIR Insertion

Several advanced nuclear fuel concepts are being considered throughout the nuclear industry. Implementation of these concepts could increase accident tolerance or enhance performance beyond the capabilities of the UO₂-based nuclear fuel currently in use. Qualification and deployment of any new fuel requires rigorous irradiation testing to demonstrate performance under representative normal and off-normal operating conditions. The traditional approach for qualifying new fuels requires exhaustive execution of many integral fuel tests. However, due to the long timeframe for executing these integral tests and the limited number of available materials test reactors, this approach is becoming impractical. To accelerate fuel qualification, Oak Ridge National Laboratory developed the MiniFuel irradiation vehicle for use in conducting accelerated separate effects irradiation testing of a wide range of nuclear fuel materials in the High Flux Isotope Reactor (HFIR). The first MiniFuel irradiations performed in the facility tested sol gel–derived uranium nitride kernels and tristructural isotropic (TRISO)-coated particle fuels. This report describes the preparation and assembly of the first set of monolithic MiniFuel irradiations conducted to support accident-tolerant fuel (ATF) development and accelerated fuel qualification. Two irradiation targets containing a variety of UO₂ and U₃Si₂ disk fuel specimens were fabricated and assembled for irradiation to burnups of 8-10 and 28-40 MWd/kg U. The target irradiation temperature is 450-550°C. Irradiation of U₃Si₂ will provide new data regarding the irradiation performance of a candidate ATF to complement current ATF-1 integral experiments being performed in the Advanced Test Reactor. UO₂ samples were included as a reference so that the results from the MiniFuel experiments can be compared with the extensive UO₂ fuel performance database. The monolithic MiniFuel capsules were successfully assembled, welded, and tested per HFIR requirements and are ready for insertion into the reactor. Pictures of the assembly process are included in this report. The experiment is planned for insertion into the HFIR during cycle 487 in April 2020.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

About the Complex Natural and Engineered Systems Pillar

Los Alamos National Laboratory is a world leader in applying multi-disciplinary science to complex systems within the Complex Natural and Engineered Systems (CNES) challenge areas. Our search for solutions requires science and technology innovation, as well as an integrated experiment, theory, and modeling and simulation approach. Our research and development spans from improving engineered systems such as nuclear weapons and the power grid, to understanding the interface of human and engineered systems from the subsurface to space, to studying how complex natural systems such as disease and climate impact humanity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

MSR Salt Spill Accident Testing Using Eutectic NaCl-UCl 3

Assessing the potential consequences of identified accident scenarios is an essential part of the licensing process for a new nuclear reactor and is achieved by using accident progression models. A likely accident scenario that will be evaluated by developers of molten salt reactors (MSRs) is a spill of radionuclide-bearing fuel salt onto the reactor containment floor (i.e., a salt spill accident). Models to determine the consequences of a molten salt spill accident need to be parameterized and validated using experimental data, but little experimental effort has been dedicated to fill these data gaps to date. Specifically, data is needed to enable model development for individual processes (e.g., spreading, heat transfer, corrosion, radionuclide vaporization, and aerosol generation) that quantifies the sensitivities towards the initial conditions of the spill, the ambient environment, and the features of the containment. In addition, integrated experiments that simulate salt spill accidents will need to be conducted to provide insight into coupled processes and data for model validation, but these experiments will require the use of proven methods to quantify the processes under evaluation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

140,142 Cerium Resolved Resonance Region Evaluation [Slides]

The presentation covers an overview of 140,142 Ce Isotopes, including new evaluations of 140,142 Ce that were requested by the Hanford Plutonium Finishing plant to the Nuclear Criticality Safety Program. It also discusses current ENDF/B-VIII.0 evaluation, which has an error in the 1-2 keV range. It was evaluated using multi-level Breit-Wigner and 142Ce has room for extending resolved resonance region current upper limit from 13 keV. The presentation also discusses new transmission and capture measurements of nat Ce and 142 Ce from Klaus Guber. It also states that no known integral experiments prominently feature Cerium.

07 ISOTOPE AND RADIATION SOURCES↗

Improvements of Nuclear Data Evaluations for Lead Isotopes in Support of Next Generation Lead-Cooled Fast Systems

The neutron evaluation of the isotopes that comprise natural lead were undertaken as a part of DOE-NEUP Project #19-16739. The goal of the project was to update the neutron cross sections to account for new differential measurements and incorporate the most up-to-date physics. Shortcomings in the lead cross sections was made known by several independent reports. The work performed here repeated the simulation of all the “benchmark” validation systems and concluded that the major issue is the scattering cross sections in the major lead isotopes above 100 keV. Re-evaluation of 206,207,208 Pb included both the resolved resonance region and fast region evaluations of the cross sections. Combined these regions cover energies from thermal to 20 MeV. The most drastic improvement is the resolved resonance region evaluation of 208 Pb which is now extended from 1.0 to 1.5 MeV. Parameterization of these resonances in the R-matrix provides a superior reconstruction of not only the experimental cross section but also the scattering distributions via the Blatt-Biedenharn formalism. Fast region evaluations of the three major isotopes were done to include new inelastic experimental data from the neutron Time-of-Flight facility at CERN. The culmination of all the changes to the cross section is a drastic improvement in the scattering kernel as shown in Rensselaer Polytechnic Institute (RPI) Quasi-Differential scattering measurements and improved prediction of keff for fast integral experiments. Alongside the new cross sections, new nuclear data covariance (uncertainties) have been computed and are included in the evaluation. Little is changed in the magnitude of the uncertainties but the correlations within the covariance display non-trivial changes. The new evaluations of 206,207,208 Pb have been submitted to the National Nuclear Data Center to be included in the ENDF/B-VIII.1 library. While the cross sections have been updated extensively, knowledge and modeling of the cross sections between 1.0 and 3.0 MeV for the isotopes remain a challenge. Most notably is the double differential elastic cross section for 208 Pb and 206 Pb. New quasi-differential measurements for pure samples of these two nuclei would go a long way in reducing compensating errors in the evaluations. Qualitatively, the project has produced a prosperous collaboration between the nuclear data group at RPI with staff scientists at Brookhaven National Laboratory, Naval Nuclear Laboratory, Oak Ridge National Laboratory, Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratories. Quantitatively this is reflected in seven conference presentations, at least one journal submission, and one doctoral thesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fundamentals of Scalable Nanoparticle Assembly in Engineering Polymres

Systematically improving the properties of polymer nanocomposites is contingent on effectively controlling nanoparticle (NP) dispersion; further, it is necessary to attain this at scale if these methods are to impact practical applications. While most past work has focused on amorphous polymers, ≈ 70% of all polymers sold annually are semicrystalline. Inspired by this apparent disconnect, our work in the current DOE funded grant and this renewal proposal employs a novel handle, polymer crystallization, to organize NPs into the various amorphous zones of the lamellar semicrystalline morphology (interlamellar, interfibrillar and interspherulitic domains) of stereoregular polymers. We hypothesize that the isothermal crystallization rate of a polymer host, G, and NP diffusivity, are the two relevant control parameters in this context. In the case where the NPs are miscible in the melt, they remain spatially well-dispersed when the polymer is crystallized at a rate that is fast relative to NP diffusion. In contrast, monolayer-thick NP sheets with intersheet spacing of ~10-100nm form in slowly crystallized samples. This sheet stacking is remarkably similar to that seen in natural materials, e.g., Nacre. There is also ordering of the NPs at the larger interfibrillar scale. Importantly, the relative fraction of engulfed, interlamellar and interfibrillar NPs is determined by G. Further, the modulus of these materials can increase by a factor of 2-3 due to the organization state of the NPs, while leaving fracture toughness unaffected. We have established the broad applicability of this approach in two polymers, polyethylene (PE) and polyethyleneoxide (PEO). To achieve this goal we developed a method for grafting long PE chains from NPs with controlled graft density and molecular weight, giving us the ability to tailor their dispersion in the PE melt prior to crystallization. In this renewal proposal, we will develop the fundamental, quantitative understanding that will allow us to independently tailor polymer crystallization rate, NP diffusivity and NP agglomeration state in semicrystalline polymers so as to facilely control NP ordering and hence properties. A program that tightly integrates experiment and theory is proposed, and a key outcome of this research will be a three-dimensional design map for different regimes of NP organization (and hence properties) that can be achieved by polymer crystallization. A second independent outcome is the role of directional solidification and how it competes with the rates of polymer crystallization and NP mobility to affect the organization of the NP.

36 MATERIALS SCIENCE↗

TEX-Hf Assemblies: Highly Enriched Uranium Plates with Hafnium Using Polyethylene Moderator and Polyethylene Reflector

This report documents the integral experiment evaluation and publication for IER-532 (TEX-Hf), Thermal/Epithermal eXperiments (TEX) with highly enriched uranium (HEU) fuel and hafnium (Hf), moderated and reflected by polyethylene. The design of TEX-Hf is a variation of IER-297 (TEX-HEU), with the inclusion of hafnium as a diluent material. The experiment and evaluation include seven configurations, all of which were acceptable as benchmark cases. These benchmark cases provide validation for hafnium in the thermal, intermediate, and fast neutron energy regimes by maximizing the sensitivity in k eff to the hafnium cross sections. The evaluation was reviewed and accepted by the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Technical Review Group on April 17, 2024, and was submitted to the ICSBEP in August 2024 following subgroup approval.

42 ENGINEERING↗

Automated microbial metabolism laboratory.

Experiments integrated into single automated laboratory to detect extraterrestrial life through measuring metabolism and growth in planetary surface material

Levin, G. V.↗

Life detection techniques.

Extraterrestrial life detection experiments integrated into single multipurpose space laboratory, including chemical analyses, metabolism identification, observation for molecular and/or cellular growth and replication

Young, R. S.↗

Thermal surveillance of Cascade Range volcanoes using ERTS-1 multispectral scanner, aircraft imaging systems, and ground-based data communication platforms

A combination of infrared images depicting areas of thermal emission and ground calibration points have proved to be particularly useful in plotting time-dependent changes in surface temperatures and radiance and in delimiting areas of predominantly convective heat flow to the earth's surface in the Cascade Range and on Surtsey Volcano, Iceland. In an integrated experiment group using ERTS-1 multispectral scanner (MSS) and aircraft infrared imaging systems in conjunction with multiple thermistor arrays, volcano surface temperatures are relayed daily to Washington via data communication platform (DCP) transmitters and ERTS-1. ERTS-1 MSS imagery has revealed curvilinear structures at Lassen, the full extent of which have not been previously mapped. Interestingly, the major surface thermal manifestations at Lassen are aligned along these structures, particularly in the Warner Valley.

Friedman, J. D.↗

The elemental abundance ratios of interstellar secondary and primary cosmic rays

We report new observations of abundances in the charge range (Z) between 2 and 10, which were obtained with a dE/dx-Cerenkov detector launched into a polar orbit on OGO-6 as part of the Caltech Solar and Galactic Cosmic Ray Experiment. Integral rigidity spectra of all the elements observed have shapes similar to that of the helium spectrum in the rigidity range of 2 to 14 GV, approaching a power law with exponent -1.6 above 8 GV. Calculations of interstellar propagation assuming a steady-state model and including the presence of interstellar helium and the effects of solar modulation predict a variation with rigidity of ratios such as Be-O and B/O, which is not observed. The data can be explained by assuming a rigidity-dependent confinement of cosmic rays within the Galaxy.

Brown, J. W.↗

Management and control of Skylab missions

The flight operations task, as developed in support of the Skylab Program, was evolutionary in nature and, to a great extent, was an orderly extension of the flight control concepts used in the Apollo Program, tempered by the nature of the Skylab Program. During the terminal portion of the Apollo Program, many of the operating concepts proposed for Skylab were tested and used for Apollo support to obtain a realistic evaluation of these new techniques. The principal concept developed in the Apollo Program and augmented in support of the Skylab Program was one wherein a professional operations team would provide support to the scientists in the areas of mission integration, experiment, and experiment support systems, monitoring and control, and data retrieval.

Roach, J. W.↗

Spacelab - A key element in the Space Shuttle Space Transportation System

Spacelab will be a key element in the Space Transportation System (STS) to be initiated with the advent of the first operational flight of Space Shuttle in 1980. Spacelab is an international, cooperative venture between the European Space Agency (ESA) and the National Aeronautics and Space Administration (NASA), which is structured to provide the scientific community an earthlike laboratory in space by 1980. The responsibilities of both ESA and NASA are divided into design and development to be accomplished by ESA and the experiment integration and operation with the Space Shuttle by NASA. While the Spacelab is a key element in the STS, it is highly dependent on other elements in the system for its resources and payload support capabilities. This paper presents the relationship of the Spacelab to other elements and the operational planning that NASA is undertaking to make the Spacelab a flexible and efficient laboratory in space.

Lee, T. J.↗

Project Explorer - Student experiments aboard the Space Shuttle

Project Explorer, a program of high school student experiments in space in a Space Shuttle self-contained payload unit (Getaway Special), sponsored by the Alabama Space and Rocket Center (ASRC) in cooperation with four Alabama universities is presented. Organizations aspects of the project, which is intended to promote public awareness of the space program and encourage space research, are considered, and the proposal selection procedure is outlined. The projects selected for inclusion in the self-contained payload canister purchased in 1977 and expected to be flown on an early shuttle mission include experiments on alloy solidification, electric plating, whisker growth, chick embryo development and human blood freezing, and an amateur radio experiment. Integration support activities planned and underway are summarized, and possible uses for a second payload canister purchased by ASRC are discussed.

Buckbee, E.↗

Experimental unsteady aerodynamics of conventional and supercritical airfoils

Experimental data on the unsteady aerodynamics of oscillating airfoils in transonic flow are presented. Two 0.5 m-chord airfoil models - an NACA 64A010 and an NLR 7301 - were tested in the NASA-Ames 11 by 11 foot Transonic Wind Tunnel at Mach numbers to 0.85, at chord Reynolds numbers to 12 million and at mean angles of attack to 4 deg. The airfoils were subjected to both pitching and plunging motions at reduced frequencies to 0.3 (physical frequencies to 53 Hz). The new hardware and the extensive use of computer-experiment integration developed for this test are described. The geometrical configuration of the model and the test arrangement are described in detail. Mean and first harmonic data are presented in both tabular and graphical form to aid in comparisons with other data and with numerical computations.

Davis, S. S.↗