Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kernel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Effect of tropospheric aerosols upon atmospheric infrared cooling rates

The effect of tropospheric aerosols on atmospheric infrared cooling rates is investigated by the use of recent models of infrared gaseous absorption. A radiative model of the atmosphere that incorporates dust as an absorber and scatterer of infrared radiation is constructed by employing the exponential kernel approximation to the radiative transfer equation. Scattering effects are represented in terms of a single scattering albedo and an asymmetry factor. The model is applied to estimate the effect of an aerosol layer made of spherical quartz particles on the infrared cooling rate. Calculations performed for a reference wavelength of 0.55 microns show an increased greenhouse effect, where the net upward flux at the surface is reduced by 10% owing to the strongly enhanced downward emission. There is a substantial increase in the cooling rate near the surface, but the mean cooling rate throughout the lower troposphere was only 10%.

Harshvardhan, MR.↗

Reducing the error of geoid undulation computations by modifying Stokes' function

The truncation theory as it pertains to the calculation of geoid undulations based on Stokes' integral, but from limited gravity data, is reexamined. Specifically, the improved procedures of Molodenskii et al. are shown through numerical investigations to yield substantially smaller errors than the conventional method that is often applied in practice. In this improved method, as well as in a simpler alternative to the conventional approach, the Stokes' kernel is suitably modified in order to accelerate the rate of convergence of the error series. These modified methods, however, effect a reduction in the error only if a set of low-degree potential harmonic coefficients is utilized in the computation. Consider, for example, the situation in which gravity anomalies are given in a cap of radius 10 deg and the GEM 9 (20,20) potential field is used. Then, typically, the error in the computed undulation (aside from the spherical approximation and errors in the gravity anomaly data) according to the conventional truncation theory is 1.09 m; with Meissl's modification it reduces to 0.41m, while Molodenskii's improved method gives 0.45 m. A further alteration of Molodenskii's method is developed and yields an RMS error of 0.33 m. These values reflect the effect of the truncation, as well as the errors in the GEM 9 harmonic coefficients. The considerable improvement, suggested by these results, of the modified methods over the conventional procedure is verified with actual gravity anomaly data in two oceanic regions, where the GEOS-3 altimeter geoid serves as the basis for comparison. The optimal method of truncation, investigated by Colombo, is extremely ill-conditioned. It is shown that with no corresponding regularization, this procedure is inapplicable.

Jekeli, C.↗

Unsteady Subsonic Loadings Due to Control-Surface Motion

RHOIV computer program predicts unsteady lifting-surface loadings caused by motions of leading edge and trailing-edge control surfaces having sealed gaps at hinge lines and side edges. Analysis is based on linear, subsonic, potential-flow theory using kernel function method. Linear combinations of pressure distributions are used that are continuous except at planform edges and hinge lines. Loading solution is obtained by downwash collocation for deflection or motion of main wing and control surfaces.

Rowe, W. S.↗

Scatter of X-rays on polished surfaces

In investigating the dispersion properties of telescope mirrors used in X-ray astronomy, the slight scattering characteristics of X-ray radiation by statistically rough surfaces were examined. The mathematics and geometry of scattering theory are described. The measurement test assembly is described and results of measurements on samples of plane mirrors are given. Measurement results are evaluated. The direct beam, the convolution of the direct beam and the scattering halo, curve fitting by the method of least squares, various autocorrelation functions, results of the fitting procedure for small scattering, and deviations in the kernel of the scattering distribution are presented. A procedure for quality testing of mirror systems through diagnosis of rough surfaces is described.

Hasinger, G.↗

Transonic flutter study of a wind-tunnel model of an arrow-wing supersonic transport

A 1/20-size, low-speed flutter model of the SCAT-15F complete airplane was tested on cables to simulate a near free-flying condition. Only the model wing and fuselage were flexible. Flutter boundaries were measured for a nominal configuration and a configuration with wing fins removed at Mach numbers M from 0.76 to 1.2. For both configurations, the transonic dip in the wing flutter dynamic pressure q boundary was relatively small and the minimum flutter q occurred near M = 0.92. Removing the wing fins increased the flutter q about 14 percent and changed the flutter mode from symmetric to antisymmetric. Vibration and flutter analyses were made using a finite-element structural representation and subsonic kernel-function aerodynamics. For the nominal configuration, the analysis (using calculated modal data) predicted the experimental flutter q levels within 10 percent but did not predict the correct flutter mode at the higher M. For the configuration without wing fins, the analysis predicted 16 to 36 percent unconservative (higher than experimental) flutter q levels and showed extreme sensitivity to mass representation details that affected wing tip mode shapes. For high subsonic M, empennage aerodynamics had a significant effect on the predicted flutter boundaries of several symmetric modes.

Ruhlin, C. L.↗

Precipitation growth in convective clouds

Analytical solutions to the equations of both the growth and motion of hailstones in updrafts and of cloud water contents which vary linearly with height were used to investigate hail growth in a model cloud. A strong correlation was found between the hail embyro starting position and its trajectory and final size. A simple model of the evolution of particle size distribution by coalescence and spontaneous and binary disintegrations was formulated. Solutions for the mean mass of the distribution and the equilibrium size distribution were obtained for the case of constant collection kernel and disintegration parameters. Azimuthal scans of Doppler velocity at a number of elevation angles were used to calculate high resolution vertical profiles of particle speed and horizontal divergence (the vertical air velocity) in a region of widespread precipitation trailing a mid-latitude squall line.

Srivastava, R. C.↗

VLA observations of impulsive solar flares at 4.9 GHz

A series of snapshot synthesis maps constructed as a function of time provided a complete mapping of source structure in one dimension and absolute location in two dimensions of five impulsive solar microwave bursts observed during July 15-18, 1978. It was found that all five flares were dominated by a single 12-18 arcsec source located between the H-alpha kernels, near the magnetic neutral line. Spectral data from Sagamore Hill (1.4-35 GHz) show that the spectral turnover at low frequencies results from the absorption by the ambient active region; these results, together with the observed magnetic configuration, suggest a model which could explain the evolution in source structure at 4.9 GHz in terms of magnetic reconnection which starts below the optical depth of the ambient active region equal to 1.

Marsh, K. A.↗

Radiative transfer theory for passive microwave remote sensing of a two-layer random medium with cylindrical structures

A model of the vegetation layer as a two-layer random medium with a small correlation length l sub rho in the horizontal direction, and a large correlation length l sub z in the vertical direction, is presented for fields with cylindrical structures. As l sub z approaches infinity, closed form solutions are derived for the brightness temperatures; the kernels in the scattering terms of the radiative transfer equations result in delta functions showing that forward scattering is dominant over all other directions. The results are compared with the Gaussian quadrature method data for numerical solution of the radiative transfer equations.

Chuang, S. L.↗

Transonic flutter study of a wind-tunnel model of an arrow-wing supersonic transport

A 1/20-size, low-speed flutter model of the SCAT-15F complete airplane was tested in a wind-tunnel on cables to simulate a near free-flying condition. Only the model wing and fuselage were flexible. Flutter boundaries were measured for a nominal configuration and a configuration with wing fins removed at Mach numbers M from 0.76 to 1.2. For both configurations, the transonic dip in the wing flutter dynamic pressure q boundary was relatively small and the minimum flutter q occurred near M = 0.92. Removing the wing fins increased the flutter q about 14 percent and changed the flutter mode from symmetric to antisymmetric. Vibration and flutter analyses were made using a finite-element structural representation and subsonic kernel-function aerodynamics. For the nominal configuration, the analysis (using calculated modal data) predicted the experimental flutter q levels within 10 percent but did not predict the correct flutter mode at the higher M. For the configuration without wing fins, the analysis predicted 16 to 36 percent unconservative (higher than experimental) flutter q levels and showed extreme sensitivity to mass shapes.

Ruhlin, C. L.↗

A numerical method for integrating the kinetic equations of droplet spectra evolution by condensation/evaporation and by coalescence/breakup processes

An extension of the method of moments is developed for the numerical integration of the kinetic equations of droplet spectra evolution by condensation/evaporation and by coalescence/breakup processes. The number density function n sub k (x,t) in each separate droplet packet between droplet mass grid points (x sub k, x sub k+1) is represented by an expansion in orthogonal polynomials with a given weighting function. In this way droplet number concentrations, liquid water contents and other moments in each droplet packet are conserved and the problem of solving the kinetic equations is replaced by one of solving a set of coupled differential equations for the number density function moments. The method is tested against analytic solutions of the corresponding kinetic equations. Numerical results are obtained for different coalescence/breakup and condensation/evaporation kernels and for different initial droplet spectra. Also droplet mass grid intervals, weighting functions, and time steps are varied.

Emukashvily, I. M.↗

Film shape calculations on supercomputers

Both scalar and vector operations are described to demonstrate usefulness of supercomputers (computers with peak computing speeds exceeding 100 million operative per second) in solving tribological problems. A simple kernel of the film shape calculations in an elastohydrodynamic lubricated rectangular contact is presented and the relevant equations are described. Both scalar and vector versions of the film shape code are presented. The run times of the two types of code indicate that over a 50-to-1 speedup of scalar to vector computational time for vector lengths typically used in elastohydrodynamic lubrication analysis is obtained.

Hamrock, B. J.↗

On the power output of some idealized source configurations with one or more characteristic dimensions

The calculation of power output from a (finite) linear array of equidistant point sources is investigated with allowance for a relative phase shift and particular focus on the circumstances of small/large individual source separation. A key role is played by the estimates found for a twin parameter definite integral that involves the Fejer kernel functions, where N denotes a (positive) integer; these results also permit a quantitative accounting of energy partition between the principal and secondary lobes of the array pattern. Continuously distributed sources along a finite line segment or an open ended circular cylindrical shell are considered, and estimates for the relatively lower output in the latter configuration are made explicit when the shell radius is small compared to the wave length. A systematic reduction of diverse integrals which characterize the energy output from specific line and strip sources is investigated.

Levine, H.↗

The crack problem for a nonhomogeneous plane

The plane elasticity problem for a nonhomogeneous medium containing a crack is considered. It is assumed that the Poisson's ratio of the medium is constant and the Young's modulus E varies exponentially with the coordinate parallel to the crack. First the half plane problem is formulated and the solution is given for arbitrary tractions along the boundary. Then the integral equation for the crack problem is derived. It is shown that the integral equation having the derivative of the crack surface displacement as the density function has a simple Cauchy type kernel. Hence, its solution and the stresses around the crack tips have the conventional square root singularity. The solution is given for various loading conditions. The results show that the effect of the Poisson's ratio and consequently that of the thickness constraint on the stress intensity factors are rather negligible.

Delale, F.↗

Reduction of computer usage costs in predicting unsteady aerodynamic loadings caused by control surface motions: Computer program description

A digital computer program was developed to calculate unsteady loadings caused by motions of lifting surfaces with leading edge and trailing edge controls based on the subsonic kernel function approach. The pressure singularities at hinge line and side edges were extracted analytically as a preliminary step to solving the integral equation of collocation. The program calculates generalized aerodynamic forces for user supplied deflection modes. Optional intermediate output includes pressure at an array of points, and sectional generalized forces. From one to six controls on the half span can be accomodated.

Petrarca, J. R.↗

A qualitative interpretation of 7 August 1972 impulsive phase flare H alpha line profiles

The considered investigation shows that existing models of the formation of the H-alpha line during flares appear to provide clear qualitative evidence that heating of the H-alpha forming regions of the flare chromosphere in the bright H-alpha kernels observed during the impulsive phase of solar flares is not due primarily to heating by Coulomb collisions of a power-law distribution of 10-100 keV electrons with chromospheric material. It appears rather that some shorter-range process, involving possibly conduction or optically thick radiative transfer, is favored. Such a conclusion is clearly relevant to collisionless confinement modelling. However, much work remains to be done before there will be a basis for quantitatively testing the consistency of the considered picture with chromospheric diagnostics.

Canfield, R. C.↗

Observations of solar flare transition zone plasmas from the Solar Maximum Mission

The spatial and temporal evolution of the Si IV and O IV intensity, density and mass motions in preflare and flare transition zone plasmas are studied for the case of the April 8, 1980 flare. It is found that: (1) the UV flare observed in the Si IV and O IV lines is unambiguously identified as occurring in a low-lying, preexisting transition zone loop which spanned the magnetic neutral line separating a larger leader spot and a newly emerged, isolated spot of opposite polarity; (2) at the onset of the flare, the easternmost footpoint, which was anchored in an isolated spot region of high longitudinal magnetic field gradient, showed sudden, impulsive brightening with large intensity increases; and (3) the release flare energy was transported by way of large-scale connecting field lines to other parts of the active region, producing the hot plasma and H-alpha kernels observed near the trailing spot.

Cheng, C.-C.↗