Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROMETEOROID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Studies of solar flares and impact craters in partially protected crystals

Solar-flare track gradients and microcrater densities were determined in two lunar rocks, and it was found that approximately 900 craters greater than or equal to 0.1 microns in diameter and between 10 and 15 times 10 to the minus sixth craters greater than or equal to 500 microns central pit diameter are produced per sq cm per yr per 2-pi steradians on the moon. There is no evidence for a change in the flux of particles producing submicron craters in the last 1,000,000 years. No anisotropy was found between lunar north and the plane of the ecliptic in the directional flux distribution of micrometeoroids producing submicron craters. In contrast to data reported by other investigators, the ratio of solar-flare track densities at 100-micron depth to the abundance of 0.1-micron craters/sq cm is determined to be approximately one for all samples studied.

Morrison, D. A.↗
NASA NTRS1978

Phobos - Photometry and origin of dark markings on crater floors

Viking Orbiter 1 close encounter pictures of Phobos reveal unusual dark patches on the floors of many craters. Photometry of these features indicates that they have a similar normal reflectance but a phase coefficient 30% larger than the average surface. These facts suggest that the 'dark' material has a similar composition but a much rougher texture than the average surface of Phobos. By analogy with terrestrial impact, explosion and laboratory craters, the dark patches are interpreted as impact generated melt pools which remain visible on Phobos due to the low value of g and consequent small amount of fallback ejecta and slumping. Since blanketing by ejecta from subsequent impacts and micrometeoroid erosion should eventually obliterate such features, they should be more conspicuous in the fresher craters. Similar features should be visible on small asteroids and other low g bodies. However, they are not prominent on the surface of Deimos - possibly because most of the craters imaged at high resolution on the outer satellite appear to have been blanketed by several meters of fine-grained material.

Goguen, J.↗
NASA NTRS1978

Miniregoliths. I - Dusty lunar rocks and lunar soil layers

A detailed Monte-Carlo model for rock surface evolution shows that erosion processes alone cannot account for the shapes of the solar flare particle track profiles generally observed at depths of about 100 microns and less in rocks. The observed profiles are easily explained by a steady accumulation of fine dust at a rate of 0.3 to 3 mm per m.y., depending on the micrometeoroid impact rate which controls the dust cover and results in maximum dust thicknesses on the order of 100 microns to 1 mm. The commonly used lunar soil track parameters are derived in terms of parameters characterizing the exposure of soil grains in the few-millimeter-thick surface mixing and maturation zone which is one form of miniregolith. Correlation plots permit determining the degree of mixing in soil samples and the amount of processing (maturation) in surface miniregoliths. It is shown that the sampling process often artificially mixes together finer distinct layers, and that ancient miniregolith layers on the order of a millimeter thick are probably common in the lunar soil.

Comstock, G. M.↗
NASA NTRS1979

NEP heat pipe radiators

This paper covers improvements of heat pipe radiators for the thermionic NEP design. Liquid metal heat pipes are suitable as spacecraft radiator elements because of high thermal conductance, low mass and reliability, but the NEP thermionic system design was too large and difficult to fabricate. The current integral collector-radiator design consisting of several layers of thermionic converters, the annular-tangential collector heat pipe, the radiator heat pipe, and the transition zone designed to minimize the temperature difference between the collector heat pipe and radiator heat pipe are described. Finally, the design of micrometeoroid armor protection and the fabrication of the stainless steel annular heat pipe with a tangential arm are discussed, and it is concluded that the heat rejection system for the thermionic NEP system is well advanced, but the collector-radiator heat pipe transition and the 8 to 10 m radiator heat pipe with two bends require evaluation.

Ernst, D. M.↗
NASA NTRS1980

Design and development of a hard tube flexible radiator system

The construction and operational characteristics of an extended life flexible radiator panel is described. The radiator panel consists of a flexible fin laminate and stainless steel flow tubes designed for a 90 percent probability of surviving 5 years in an Earth orbit micrometeoroid environment. The radiator panel rejects 1.1 kW sub t of heat into an environmental sink temperature of 0 F. Total area is 170 square feet and the panel extends 25 feet in the fully deployed position. When retracted the panel rolls onto a 11.5 inch diameter by 52 inch long storage drum, for a final stored diameter of 22 inches.

Hixon, C. W.↗
NASA NTRS1979

Interplanetary dust

Progress in the study of interplanetary dust during the past four years is reviewed. Attention is given to determinations of the relative contributions of interstellar dust grains, collisional debris from the asteroid belt and short-period comets to the interplanetary dust cloud. Effects of radiation pressure and collisions on particle dynamics are discussed, noting the discovery of the variation of the orbital parameters of dust particles at 1 AU with size and in situ measurements of dust density between 0.3 and 5 AU by the Helios and Pioneer spacecraft. The interpretation of the zodiacal light as produced by porous absorbing particles 10 to 100 microns in size is noted, and measurements of the Doppler shift, light-producing-particle density, UV spectrum, photometric axis and angular scattering function of the zodiacal light are reported. Results of analyses of lunar rock microcraters as to micrometeoroid density, flux rate, size distribution and composition are indicated and interplanetary dust particles collected from the stratosphere are discussed. Findings concerning the composition of fragile meteoroid types found as cosmic spherules in deep sea sediments are also presented.

Brownlee, D. E.↗
NASA NTRS1979

Modular heat pipe radiators for enhanced Shuttle mission capabilities

Current heat pipe radiator technology is reviewed and the results from three state-of-the-art hardware programs are summarized. Heat pipe radiators are shown to be an improvement over all-fluid loop panels for long duration space missions, when micrometeoroid survivability is important. Finally, several heat pipe radiator design concepts are presented which would enhance Shuttle mission capabilities by either extending mission life and/or augmenting heat rejection capability.

Alario, J.↗
NASA NTRS1979

Optimum design of spacecraft radiators for large capacity or long duration mission applications

Results of trade studies comparing optimum pumped fluid and hybrid heat pipe/pumped fluid radiator designs are presented. Design variables considered in the system optimization analyses include transport fluid properties and Reynolds number, pump loop component reliabilities, micrometeoroid protection, heat pipe spacing, manifolding and flow routing in pumped fluid designs, transport tubing spacing and diameters, and radiator fin parameters. Criteria for evaluating candidate radiator system designs include mass, radiator area, and overall system reliability. The studies show advantages in constructing large systems from small independent subsystems with oversizing to account for subsystem failures. The optimum size and survivability of the subsystems are identified as a function of the radiator construction, the system heat rejection requirements, the mission duration, and the system reliability requirements.

Leach, J. W.↗
NASA NTRS1980

Measurement of cosmic ray produced Mn-53 in deep sea metallic spherules

Cosmic ray originated Mn-53 nuclides were measured in deep sea metallic spherules by neutron activation analysis. The spherules may be fused micrometeoroids or ablation droplets from larger objects; the low activities of Mn-53 may indicate its evaporation loss resulting from the heating in the earth's atmosphere or short exposure age. The Mn-53 nuclide is now being measured in chondritic spherules, and Be-10 and Cl-36 concentrations are determined in individual spherules using ion counting methods.

Nishiizumi, K.↗
NASA NTRS1980

Analysis of interplanetary dust collections

Interplanetary dust particles collected in the form of micrometeorites in the stratosphere and meteor ablation spherules in deep sea sediments are possibly a relatively unbiased sample of the micrometeoroid complex near 1 AU. Detailed laboratory analysis of the particles has provided information on physical properties which may be useful in modeling a variety of aspects of interplanetary dust.

Brownlee, D. E.↗
NASA NTRS1980

A model of the origin of the Jovian ring

Assuming that the micron-sized particles making up the bright Jovian ring are fragments of erosive collisions between micrometeoroid projectiles and large parent bodies, a physical model of the ring is calculated. This leads to a well-defined size distribution for the ejecta, whose optical properties can be compared with observation. The (most likely silicate) ejecta material maximum diameter is estimated to be 0.1 micron, and most likely the result of Io volcanic activity. The impact model's determination of ejecta size distribution in turn determines the structure of the ring, with the largest ejecta forming the bright ring, medium-sized ejecta forming a disk that extends to the Jovian atmosphere, and small ejecta forming a faint halo whose structure is dominated by electromagnetic forces.

Gruen, E.↗
NASA NTRS1981

Asteroidal agglutinate formation and implications for asteroidal surfaces

The possible role of spallation on the free surfaces of target bodies in asteroid surface evolution in the presence of colliding bodies is considered. The ease of impact melt formation is discussed based on the results of shock recovery experiments, and a difference between collisions with dense, nonporous targets and with porous, particulate powders is demonstrated. It is shown that agglutinate-type glasses can be produced at impact velocities of 5 km/sec, but only in highly comminuted, porous targets and not in dense rocks. The apparent lack of agglutinate-type glasses on asteroid surfaces is explained in terms of coarse-grained asteroidal surfaces acting as dense, nonporous bedrock. It is argued that a possible mechanism inhibiting asteroidal surface comminution so as to inhibit melt formation and the effects of micrometeoroid impacts can be represented by collision processes with finite-sized targets rather than with a semi-infinite half-space as in the case of the moon, which give rise to spallation products rather than crater ejecta.

Horz, F.↗
NASA NTRS1981

The liquid droplet radiator - An ultralightweight heat rejection system for efficient energy conversion in space

A heat rejection system for space is described which uses a recirculating free stream of liquid droplets in place of a solid surface to radiate waste heat. By using sufficiently small droplets (less than about 100 micron diameter) of low vapor pressure liquids (tin, tin-lead-bismuth eutectics, vacuum oils) the radiating droplet sheet can be made many times lighter than the lightest solid surface radiators (heat pipes). The liquid droplet radiator (LDR) is less vulnerable to damage by micrometeoroids than solid surface radiators, and may be transported into space far more efficiently. Analyses are presented of LDR applications in thermal and photovoltaic energy conversion which indicate that fluid handling components (droplet generator, droplet collector, heat exchanger, and pump) may comprise most of the radiator system mass. Even the unoptimized models employed yield LDR system masses less than heat pipe radiator system masses, and significant improvement is expected using design approaches that incorporate fluid handling components more efficiently. Technical problems (e.g., spacecraft contamination and electrostatic deflection of droplets) unique to this method of heat rejection are discussed and solutions are suggested.

Mattick, A. T.↗
NASA NTRS1981

The inner satellites of Jupiter

The Jupiter moon Amalthea and the smaller satellites J1, J2, and J3, discovered by Voyagers 1 and 2, are discussed under the collective appellation of 'inner satellites', which distinguishes them from the Galilean satellites and the outer satellites, J6-J13. Amalthea is a dark, irregular body on which two large craters are visible, with an estimated surface gravity of 5-7 cm/sec-squared. It is speculated that Amalthea's unique color/reflectance characteristics are due to prolonged charged particle and high-velocity micrometeoroid exposure. Dimensional data are presented for J1-3.

Veverka, J.↗
NASA NTRS1982

The LDEF benefits

The Long Duration Exposure Facility (LDEF) is described, and experiments planned for the first LDEF mission are discussed. Four of the eight involve scientific studies of interstellar gas, micrometeoroids, cosmic rays, and crystal growth in zero gravity, and four involve technology studies of the space environmental effects on solar cells, composite materials, thermal coatings, fiber optics, and electronic instruments. For each experiment, the objectives and methods are discussed.

Kinard, W. H.↗
NASA NTRS1982

Skylab: Its anguish and triumph - A memoir

During its ascent to earth orbit, Skylab, launched May 14, 1973, sustained severe damage due to the premature deployment of its micrometeoroid shield. In this paper, a participating engineer describes how a thermal shield repair concept was developed and appropriate hardware was built and tested within 11 days of the mishap, and how the repair concept was sucessfully implemented in space to rescue Skylab.

Von Puttkamer, J.↗
NASA NTRS1983

On the nature of the interaction of the Jovian magnetosphere with the icy Galilean satellites

The effects of plasma and micrometeoroid bombardment of each satellite are considered in the case of interactions between the Jovian magnetosphere and Europa, Ganymede, and Callisto, in an attempt to understand the influences of these exogenic processes on the surface properties of each of the three moons. Sublimated and sputtered H2O results in a net O2 atmosphere on each of the three moons, and the effectiveness of such an atmosphere in preventing the Jovian plasma from reaching each satellite surface is considered for a variety of magnetospheric conditions. Also studied are the effects of possible satellite magnetic field magnitude and orientation, in order to estimate satellite magnetosphere properties, and the orbits of charged micrometeroids in the Jupiter magnetosphere, in order to determine the relative flux of these particles over the satellite surfaces.

Wolff, R. S.↗