SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Results are reported for optical-wavelength photopolarimetry of Ganymede from Voyager 1. A phase coefficient of 0.011 + or - 0.001 mag/deg and an opposition effect of 0.17 + or - 0.03 mag are derived. It is shown that Ganymede's surface is probably more porous than Callisto's and that micrometeoroids may continuously roughen the surface of Ganymede.
This paper covers improvements of heat pipe radiators for the thermionic NEP design. Liquid metal heat pipes are suitable as spacecraft radiator elements because of high thermal conductance, low mass and reliability, but the NEP thermionic system design was too large and difficult to fabricate. The current integral collector-radiator design consisting of several layers of thermionic converters, the annular-tangential collector heat pipe, the radiator heat pipe, and the transition zone designed to minimize the temperature difference between the collector heat pipe and radiator heat pipe are described. Finally, the design of micrometeoroid armor protection and the fabrication of the stainless steel annular heat pipe with a tangential arm are discussed, and it is concluded that the heat rejection system for the thermionic NEP system is well advanced, but the collector-radiator heat pipe transition and the 8 to 10 m radiator heat pipe with two bends require evaluation.
The construction and operational characteristics of an extended life flexible radiator panel is described. The radiator panel consists of a flexible fin laminate and stainless steel flow tubes designed for a 90 percent probability of surviving 5 years in an Earth orbit micrometeoroid environment. The radiator panel rejects 1.1 kW sub t of heat into an environmental sink temperature of 0 F. Total area is 170 square feet and the panel extends 25 feet in the fully deployed position. When retracted the panel rolls onto a 11.5 inch diameter by 52 inch long storage drum, for a final stored diameter of 22 inches.
Progress in the study of interplanetary dust during the past four years is reviewed. Attention is given to determinations of the relative contributions of interstellar dust grains, collisional debris from the asteroid belt and short-period comets to the interplanetary dust cloud. Effects of radiation pressure and collisions on particle dynamics are discussed, noting the discovery of the variation of the orbital parameters of dust particles at 1 AU with size and in situ measurements of dust density between 0.3 and 5 AU by the Helios and Pioneer spacecraft. The interpretation of the zodiacal light as produced by porous absorbing particles 10 to 100 microns in size is noted, and measurements of the Doppler shift, light-producing-particle density, UV spectrum, photometric axis and angular scattering function of the zodiacal light are reported. Results of analyses of lunar rock microcraters as to micrometeoroid density, flux rate, size distribution and composition are indicated and interplanetary dust particles collected from the stratosphere are discussed. Findings concerning the composition of fragile meteoroid types found as cosmic spherules in deep sea sediments are also presented.
Current heat pipe radiator technology is reviewed and the results from three state-of-the-art hardware programs are summarized. Heat pipe radiators are shown to be an improvement over all-fluid loop panels for long duration space missions, when micrometeoroid survivability is important. Finally, several heat pipe radiator design concepts are presented which would enhance Shuttle mission capabilities by either extending mission life and/or augmenting heat rejection capability.
Results of trade studies comparing optimum pumped fluid and hybrid heat pipe/pumped fluid radiator designs are presented. Design variables considered in the system optimization analyses include transport fluid properties and Reynolds number, pump loop component reliabilities, micrometeoroid protection, heat pipe spacing, manifolding and flow routing in pumped fluid designs, transport tubing spacing and diameters, and radiator fin parameters. Criteria for evaluating candidate radiator system designs include mass, radiator area, and overall system reliability. The studies show advantages in constructing large systems from small independent subsystems with oversizing to account for subsystem failures. The optimum size and survivability of the subsystems are identified as a function of the radiator construction, the system heat rejection requirements, the mission duration, and the system reliability requirements.
Cosmic ray originated Mn-53 nuclides were measured in deep sea metallic spherules by neutron activation analysis. The spherules may be fused micrometeoroids or ablation droplets from larger objects; the low activities of Mn-53 may indicate its evaporation loss resulting from the heating in the earth's atmosphere or short exposure age. The Mn-53 nuclide is now being measured in chondritic spherules, and Be-10 and Cl-36 concentrations are determined in individual spherules using ion counting methods.
Interplanetary dust particles collected in the form of micrometeorites in the stratosphere and meteor ablation spherules in deep sea sediments are possibly a relatively unbiased sample of the micrometeoroid complex near 1 AU. Detailed laboratory analysis of the particles has provided information on physical properties which may be useful in modeling a variety of aspects of interplanetary dust.
Assuming that the micron-sized particles making up the bright Jovian ring are fragments of erosive collisions between micrometeoroid projectiles and large parent bodies, a physical model of the ring is calculated. This leads to a well-defined size distribution for the ejecta, whose optical properties can be compared with observation. The (most likely silicate) ejecta material maximum diameter is estimated to be 0.1 micron, and most likely the result of Io volcanic activity. The impact model's determination of ejecta size distribution in turn determines the structure of the ring, with the largest ejecta forming the bright ring, medium-sized ejecta forming a disk that extends to the Jovian atmosphere, and small ejecta forming a faint halo whose structure is dominated by electromagnetic forces.
The possible role of spallation on the free surfaces of target bodies in asteroid surface evolution in the presence of colliding bodies is considered. The ease of impact melt formation is discussed based on the results of shock recovery experiments, and a difference between collisions with dense, nonporous targets and with porous, particulate powders is demonstrated. It is shown that agglutinate-type glasses can be produced at impact velocities of 5 km/sec, but only in highly comminuted, porous targets and not in dense rocks. The apparent lack of agglutinate-type glasses on asteroid surfaces is explained in terms of coarse-grained asteroidal surfaces acting as dense, nonporous bedrock. It is argued that a possible mechanism inhibiting asteroidal surface comminution so as to inhibit melt formation and the effects of micrometeoroid impacts can be represented by collision processes with finite-sized targets rather than with a semi-infinite half-space as in the case of the moon, which give rise to spallation products rather than crater ejecta.
A heat rejection system for space is described which uses a recirculating free stream of liquid droplets in place of a solid surface to radiate waste heat. By using sufficiently small droplets (less than about 100 micron diameter) of low vapor pressure liquids (tin, tin-lead-bismuth eutectics, vacuum oils) the radiating droplet sheet can be made many times lighter than the lightest solid surface radiators (heat pipes). The liquid droplet radiator (LDR) is less vulnerable to damage by micrometeoroids than solid surface radiators, and may be transported into space far more efficiently. Analyses are presented of LDR applications in thermal and photovoltaic energy conversion which indicate that fluid handling components (droplet generator, droplet collector, heat exchanger, and pump) may comprise most of the radiator system mass. Even the unoptimized models employed yield LDR system masses less than heat pipe radiator system masses, and significant improvement is expected using design approaches that incorporate fluid handling components more efficiently. Technical problems (e.g., spacecraft contamination and electrostatic deflection of droplets) unique to this method of heat rejection are discussed and solutions are suggested.
The Jupiter moon Amalthea and the smaller satellites J1, J2, and J3, discovered by Voyagers 1 and 2, are discussed under the collective appellation of 'inner satellites', which distinguishes them from the Galilean satellites and the outer satellites, J6-J13. Amalthea is a dark, irregular body on which two large craters are visible, with an estimated surface gravity of 5-7 cm/sec-squared. It is speculated that Amalthea's unique color/reflectance characteristics are due to prolonged charged particle and high-velocity micrometeoroid exposure. Dimensional data are presented for J1-3.
The Long Duration Exposure Facility (LDEF) is described, and experiments planned for the first LDEF mission are discussed. Four of the eight involve scientific studies of interstellar gas, micrometeoroids, cosmic rays, and crystal growth in zero gravity, and four involve technology studies of the space environmental effects on solar cells, composite materials, thermal coatings, fiber optics, and electronic instruments. For each experiment, the objectives and methods are discussed.
During its ascent to earth orbit, Skylab, launched May 14, 1973, sustained severe damage due to the premature deployment of its micrometeoroid shield. In this paper, a participating engineer describes how a thermal shield repair concept was developed and appropriate hardware was built and tested within 11 days of the mishap, and how the repair concept was sucessfully implemented in space to rescue Skylab.
The effects of plasma and micrometeoroid bombardment of each satellite are considered in the case of interactions between the Jovian magnetosphere and Europa, Ganymede, and Callisto, in an attempt to understand the influences of these exogenic processes on the surface properties of each of the three moons. Sublimated and sputtered H2O results in a net O2 atmosphere on each of the three moons, and the effectiveness of such an atmosphere in preventing the Jovian plasma from reaching each satellite surface is considered for a variety of magnetospheric conditions. Also studied are the effects of possible satellite magnetic field magnitude and orientation, in order to estimate satellite magnetosphere properties, and the orbits of charged micrometeroids in the Jupiter magnetosphere, in order to determine the relative flux of these particles over the satellite surfaces.
The primary objective of this experiment is to investigate the feasibility of future missions of multilayer thin-film detectors acting as energy sorter to collect micrometeoroids, if not in their original shape, at least as fragments suitable for chemical analysis. It is expected that this kind of particle collector will help in solving one of the most puzzling topics in cosmic-dust studies: the mineralogical and chemical composition of the particles. This is a matter of great interest in the study of the origin and evolution of the solar system.
The state of the art for nonmetallic materials and fabrication techniques suitable for future space structures are summarized. Typical subsystems and systems of interest to the space community that are reviewed include: (1) inflatable/rigidized space hangar; (2) flexible/storable acoustic barrier; (3) deployable fabric bulkhead in a space habitat; (4) extendible tunnel for soft docking; (5) deployable space recovery/re-entry systems for personnel or materials; (6) a manned habitat for a space station; (7) storage enclosures external to the space station habitat; (8) attachable work stations; and (9) safe haven structures. Performance parameters examined include micrometeoroid protection; leakage rate prediction and control; rigidization of flexible structures in the space environment; flammability and offgassing; lifetime for nonmetallic materials; crack propagation prevention; and the effects of atomic oxygen and space debris. An expandable airlock for shuttle flight experiments and potential tethered experiments from shuttle are discussed.
Ejecta from impacts of micrometeoroids on Saturn's ring particles will, in most cases, remain in orbit about Saturn and eventually be reaccreted by the rings, possibly at a different radial location. The resulting mass transport has been suggested as the cause of some of the features observed in Saturn's rings. Previous attempts to model this transport have used numerical simulations which have not included the effects of the angular momentum transport coincident with mass transport. An analytical model for ballistic mass transport in Saturn's rings is developed. The model includes the effects of angular momentum advection and shows that the net material movement due to angular momentum advection is comparable to that caused by direct ballistic mass transport.