Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixing layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Highly ionized gas in the Galactic disk: The l = 295 deg, b,= 0 deg interarm direction

I present new high-resolution measurements of ultraviolet interstellar absorption lines toward three distant stars in the Galactic disk in the general direction l = 295 deg, b = 0 deg. The high ionization lines of Si IV and C IV toward HD 100276, HD 103779, and HD 104705 show substantial variations on angular scales of less than 1 deg, or about 50-100 pc at the distance of the stars. The Si IV and C IV midplane densities derived for HD 100276 and HD 103779 are N(sub o) (Si IV) approximately = 1.3 x 10(exp -9) cm(exp -3) and n(sub o)(C IV) approximately = 4.5 x 10(exp -9) cvm(exp -3), approximately a factor of 2-3 lower than the Galactic averages. Toward HD 104705, the Si IV midplane density is near the average value, but the C IV midplane density is a factor of 3 higher than average. The integrated C IV and Si IV ratios along the HD 100276 and HD 100379 sight lines are similar to the N(C IV)/N(Si IV) = 3.6 +/- 1.3 ratio for a sample of halo stars. For the HD 104705 sight line, N(C IV)/N(Si IV) = 11 and N(C IV)/N(N V) greater than 10. Turbulent mixing layers provide a possible source for the observed absorption along the three sight lines as does gas associated with cooling flows. If mixing layers are the primary source of the absorption along the disk sight lines, then the entrainment velocity of the hot gas is approximately 100 km/s and the post mixed gas temperature is approximately 2 x 10(exp 5) K; same differences may exist for these mixing layers compared to those inferred for gas toward the Galactic poles. Current models of cooling, hot gas in supernova remnants, and magnetized conduction fronts do not accurately describe the high ion properties toward the disk stars in this study.

Sembach, Kenneth R.↗

Boundary layer ozone - An airborne survey above the Amazon Basin

Ozone data obtained over the forest canopy of the Amazon Basin during July and August 1985 in the course of NASA's Amazon Boundary Layer Experiment 2A are discussed, and ozone profiles obtained during flights from Belem to Tabatinga, Brazil, are analyzed to determine any cross-basin effects. The analyses of ozone data indicate that the mixed layer of the Amazon Basin, for the conditions of undisturbed meteorology and in the absence of biomass burning, is a significant sink for tropospheric ozone. As the coast is approached, marine influences are noted at about 300 km inland, and a transition from a forest-controlled mixed layer to a marine-controlled mixed layer is noted.

Gregory, Gerald L.↗

Stratocumulus cloud deepening through entrainment

Under a substantial range of realistic conditions, stratocumulus cloud top entrainment is noted to either deepen an existing cloud layer or produce clouds in an unsaturated mixed layer, though the entrained air is warmer and drier than the mixed-layer air. These results, which apply irrespective of entrainment rate-determining mechanism, imply that the cloud top entrainment instability discussed by Randall (1980) and Deardorff (1980) does not necessarily destroy a layer cloud. Examples are given which include soundings, marine layer data, and simulation results produced by the UCLA general circulation model.

Randall, D. A.↗

Remote detection of ocean features in the Lesser Antilles using ERTS-1 data

The author has identified the following significant results. Photographic data received from the ERTS-1 satellite over the Lesser Antilles Islands shows distinct ocean features on the leeward side of each island. Attempts to relate these features to ocean eddy formations with the aid of ground truth data proved unsuccessful. However, analysis of surface and upper air wind data correlate extremely well with the size, shape, and downwind extent of the ocean features. Studies to date indicate strongly that these features result from horizontal differences in sea surface roughness due to the wind shadow effect of the islands. The results suggest that horizontal variations in the reflectance of the sea surface will make remote sensing of the ocean mixed layer more difficult than previously anticipated. The surface reflection seems to be large enough to mask the smaller variations in backscattered energy from the mixed layer. Efforts to limit the effect of surface reflectance by photographic differencing of two MSS bands were unsuccessful. A supplementary study to enhance the energy reflected from the mixed layer through numerical differencing of ERTS-1 digital data is planned.

Hanson, K. J.↗

Experiments on the enhancement of compressible mixing via streamwise vorticity. II - Vortex strength assessment and seed particle dynamics

The effect of streamwise vorticity on compressible axisymmetric mixing layers is examined using vortex strength assessment and seed particle dynamics analysis. Experimental results indicate that the particles faithfully represent the dynamics of the turbulent swirling flow. A comparison of the previously determined mixing layer growth rates with the present vortex strength data reveals that the increase of turbulent mixing up to 60 percent scales with the degree of swirl. The mixing enhancement appears to be independent of the compressibility level of the mixing layer.

Naughton, J. W.↗

Retrieval of Daily Maps of PM2.5 Aerosol in the Problematic California Valleys: Bright, Speckled Reflectances, Thin AOT, but High Pollution

The San Joaquin Valley suffers from severe episodes of respirable aerosol (PM2.5) in wintertime.We provide maps of aerosol episodes using daily snapshots of PM2.5 and its changing features despite numerous difficulties inherent to sampling the region. Linear relationships relating aerosol optical thickness (AOT) to PM2.5 give an explained variance of approximately 3.The GEO-CAPE mission has as a goal the provision of relevant measures of respirable aerosol to the community,but has not formulated a science goal beyond the limited goal of retrieval of AOT, bringing the usefulness of GEO-CAPE into doubt.Our special focus was on the DISCOVER-AQ period, Jan-Feb 2013, which had many supporting measurements.Both high pollution and retrieval difficulties tend to occur in many Mediterranean agricultural regions like the San Joauin. One difficulty is the relatively bright surfaces with considerable exposed soil. NASAs MAIAC and MODIS Deep Blue retrieval techniques are shown to have considerable skill even at low aerosol optical thickness (AOT) values, as evaluated by concurrent AERONET sunphotometer measurements.More significantly, these AOT values can correspond to high daytime PM2.5 since aerosol mixed layer depth is thin and variable, 200m 600 m. The thin layers derive from typical subsidence of dry air between more stormy periods. This situation provides an advantage: water vapor column is also almost completely limited to a similar mixed layer depth, and can thus serve as a measure of aerosol dilution.Using the MAIAC Water Vapor Column:In order to make the maps below, we used the MAIAC data but subtracted partial water-vapor columns estimated from MERRA Reanalysis Data availabe from the GSFC GMAO using kriging. We did not use the mixed-layer estimates from MERRA, since such analyses were found problematic during our forecasting exercises for DISCOVER-AQ. Observations from the aircraft soundings suggested that this overlying moisture was mostly due to larger scale flows, not ML venting.However, the specific humidity at the surface and a nearly well-mixed ML was analyzed by kriging from the surface network (MesoWest, University of Utah). These were thought to be truer, uninfluenced by physical process modeling that combines with data observations. (TBD: How different are they?) Procedure: Subtract overlying partial water columns from MAIAC column water and divide this by a surface value of water vapor. (MAIAC column is expressed in cm of water, i.e., water vapor at surface conditions.This method appears to bring out useful details in the distribution of submicron particles in the very problematic Wintertime San Joaquin Valley, and allow analysis of pollution episodes throughout the valley, rather than long-term averages.

san joaquin valley↗

Estimating the Ocean Flow Field From Combined Sea Surface Temperature and Sea Surface Height Data

The primary focus of this project was on the estimation of the three-dimensional, absolute and time-evolving general circulation of the global ocean from a combined analysis of remotely sensed fields of sea surface temperature (SST) and sea surface height (SSH). The synthesis of those two fields was performed with other relevant physical data, and appropriate dynamical ocean models with emphasis on constraining ocean general circulation models by a combination of both SST and SSH data. This effort is directly related to an attempt to describe the mechanisms which give rise to observed SST and its variability on seasonal and inter-annual timescales, its relation to ocean-atmosphere interaction, and the dynamical coupling between the ocean mixed layer and the deep interior ocean. This is one of the fundamental climate related questions being pursued currently under the CLIVAR Program. Because of the strong turbulent mixing associated with atmospheric fluxes of momentum, heat and freshwater through the sea surface, the ocean forms a shallow surface boundary layer, the mixed layer which is largely homogeneous in its constituents. The relation between the temperature of the remotely sensed "skin" and the bulk of the mixed layer is largely understood (Reynolds and Smith 1994; Emery et al., 1995). However, because the surface mixed layer is effectively decoupled from the underlying ocean dynamics, an interpretation of satellite SST observations in isolation and in direct use for dynamical studies is very difficult. As a result, the impact of SST data on the understanding of ocean variability.

Stammer, Detlef↗

The roles of vertical mixing, solar radiation, and wind stress in a model simulation of the sea surface temperature seasonal cycle in the tropical Pacfic Ocean

The climatological seasonal cycle of sea surface temperature (SST) in the tropical Pacific is simulated using a newly developed upper ocean model. The roles of vertical mixing, solar radiation, and wind stress are investigated in a hierarchy of numerical experiments with various combinations of vertical mixing algorithms and surface-forcing products. It is found that the large SST annual cycle in the eastern equatorial Pacific is, to a large extent, controlled by the annually varying mixed layer depth which, in turn, is mainly determined by the competing effects of solar radiation and wind forcing. With the application of our hybrid vertical mixing scheme the model-simulated SST annual cycle is much improved in both amplitude and phase as compared to the case of a constant mixed layer depth. Beside the strong effects on vertical mixing, solar radiation is the primary heating term in the surface layer heat budget, and wind forcing influences SST by driving oceanic advective processes that redistribute heat in the upper ocean. For example, the SST seasonal cycle in the western Pacific basically follows the semiannual variation of solar heating, and the cycle in the central equatorial region is significantly affected by the zonal advective heat flux associated with the seasonally reversing South Equatorial Current. It has been shown in our experiments that the amount of heat flux modification needed to eliminate the annual mean SST errors in the model is, on average, no larger than the annual mean uncertainties among the various surface flux products used in this study. Whereas a bias correction is needed to account for remaining uncertainties in the annual mean heat flux, this study demonstrates that with proper treatment of mixed layer physics and realistic forcing functions the seasonal variability of SST is capable of being simulated successfully in response to external forcing without relying on a relaxation or damping formulation for the dominant surface heat flux contributions.

Chen, Dake↗

A two-equation turbulence model for compressible reacting flows

A two-equation turbulence model (k-epsilon) has been modified to model compressible reacting flows. A compressibility correction model based on modeling the dilatational terms in the Reynolds stress equations has been used. Computations are carried out using the Navier-Stokes solver SPARK which includes a finite rate chemistry model for hydrogen-air combustion. Initially, planar compressible mixing layers are simulated. Comparisons of the predictions with available experimental data and the predictions of a compressible Reynolds stress closure indicate that the model is well suited for the study of such flows. The decrease in the growth rate of the mixing layer with increasing convective Mach number is well predicted. The model is then tested on a three-dimensional supersonic flow problem where solid boundaries are present. An axisymmetric nonreacting mixing layer flow involving dissimilar gases is evaluated next using the model and the predictions are compared with available experimental data. Finally, two reacting turbulent flow configurations have been studied and comparison of predictions and experimental data has been done. The comparisons indicate that the model predicts the overall features of the test cases very well.

Narayan, J. R.↗

High resolution transmission electron microscopy of two stony meteorites - Murchison and Kenna

Matrix material from the Murchison C2(M) carbonaceous chondrite and less than micrometer-size pyroxene inclusions in an olivine from the Kenna ureilite have been characterized using high resolution transmission electron microscopy. A diversity of textures and mineral associations, including serpentine-type and brucite-type mixed-layering, occur in the Murchison matrix. Such mixed layer structures are new types of layer silicate. Their presence in the matrix may prove to be genetically significant. The Kenna inclusions, formed at the olivine grain margins, are of two types: (1) a disordered orthopyroxene-clinopyroxene which may have inverted from protopyroxene and (2) a pigeonite with narrow anti-phase domains (80 A to 250 A) and boundaries parallel to (100).

Mackinnon, I. D. R.↗

Influence of penetrating solar radiation on the heat budget of the equatorial Pacific Ocean

Recent satellite observations of ocean transparency, coupled with climatological surface heat fluxes and ocean density profiles, are used here to show that solar radiation in visible frequencies, usually assumed to be absorbed at the sea surface, in fact penetrates to a significant degree to below the upper mixed layer of the ocean which interacts actively with the atmosphere. The net effect is a reduction of the heat input into the upper layer; for a 20 m-thick mixed layer this is equivalent to an annual reduction in temperature of about 5-10 K. The results provide a natural explanation for the discrepancy between the SSTs predicted by models and those observed.

Lewis, Marlon R.↗

Exploring the Inner Edge of the Habitable Zone with Fully Coupled Oceans

The role of rotation in planetary atmospheres plays an important role in regulating atmospheric and oceanic heat flow, cloud formation and precipitation. Using the Goddard Institute for Space Studies (GISS) three dimension General Circulation Model (3D-GCM) we demonstrate how varying rotation rate and increasing the incident solar flux on a planet are related to each other and may allow the inner edge of the habitable zone to be much closer than many previous habitable zone studies have indicated. This is shown in particular for fully coupled ocean runs -- some of the first that have been utilized in this context. Results with a 100m mixed layer depth and our fully coupled ocean runs are compared with those of Yang et al. 2014, which demonstrates consistency across models. However, there are clear differences for rotations rates of 1-16x present earth day lengths between the mixed layer and fully couple ocean models, which points to the necessity of using fully coupled oceans whenever possible. The latter was recently demonstrated quite clearly by Hu & Yang 2014 in their aquaworld study with a fully coupled ocean when compared with similar mixed layer ocean studies and by Cullum et al. 2014. Atmospheric constituent amounts were also varied alongside adjustments to cloud parameterizations (results not shown here). While the latter have an effect on what a planet's global mean temperature is once the oceans reach equilibrium they do not qualitatively change the overall relationship between the globally averaged surface temperature and incident solar flux for rotation rates ranging from 1 to 256 times the present Earth day length. At the same time this study demonstrates that given the lack of knowledge about the atmospheric constituents and clouds on exoplanets there is still a large uncertainty as to where a planet will sit in a given star's habitable zone.

solar flux↗

Turbulence modeling for high speed compressible flows

The following grant objectives were delineated in the proposal to NASA: to offer course work in computational fluid dynamics (CFD) and related areas to enable mechanical engineering students at North Carolina A&T State University (N.C. A&TSU) to pursue M.S. studies in CFD, and to enable students and faculty to engage in research in high speed compressible flows. Since no CFD-related activity existed at N.C. A&TSU before the start of the NASA grant period, training of students in the CFD area and initiation of research in high speed compressible flows were proposed as the key aspects of the project. To that end, graduate level courses in CFD, boundary layer theory, and fluid dynamics were offered. This effort included initiating a CFD course for graduate students. Also, research work was performed on studying compressibility effects in high speed flows. Specifically, a modified compressible dissipation model, which included a fourth order turbulent Mach number term, was incorporated into the SPARK code and verified for the air-air mixing layer case. The results obtained for this case were compared with a wide variety of experimental data to discern the trends in the mixing layer growth rates with varying convective Mach numbers. Comparison of the predictions of the study with the results of several analytical models was also carried out. The details of the research study are described in the publication entitled 'Compressibility Effects in Modeling Turbulent High Speed Mixing Layers,' which is attached to this report.

Chandra, Suresh↗

Airborne Lidar Measurements of Ozone and Aerosol Profiles Over Major US Metropolitan Areas

During field missions in 2021 and 2023, the airborne NASA Langley Research Center High Spectral Resolution Lidar 2 (HSRL 2) measured the temporal and spatial evolution of ozone and aerosol distributions impacting urban air quality over the four most populated cities in the United States. HSRL-2 measurements in 2021 were acquired over the Houston metropolitan region, including Galveston Bay and the Houston Ship Channel, as part of the NASA Tracking Aerosol Convection Experiment – Air Quality (TRACER-AQ) mission conducted in collaboration with the Department of Energy. HSRL-2 measurements were acquired over Los Angeles, Chicago, and New York City in 2023 as part of the NASA Synergistic TEMPO Air Quality Science (STAQS) mission conducted in collaboration with the NOAA Atmospheric Emissions and Reactions Observed from Megacities to Marine Areas (AEROMMA) mission. HSRL 2 provided nadir vertical profiles of ozone, aerosol backscatter, extinction, and depolarization as the aircraft flew lawnmower type patterns at 9 km for several hours over these urban areas. HSRL-2 measured profiles of aerosol extinction and aerosol optical depth (AOD) via the HSRL technique at 355 and 532 nm and profiles of aerosol backscatter and depolarization at 355, 532, and 1064 nm. Mixed Layer Heights (MLH) were derived by locating sharp vertical gradients in the profiles of aerosol backscatter. The flights were comprised of up to three repeating lawnmower patterns over each city showing the evolution of the ozone and aerosol distributions from the morning through the afternoon. The HSRL-2 measurements reveal ozone enhancements near the surface as well as in the free troposphere above the mixed layer. Some lidar measurements over Chicago and New York City show the daytime boundary layer growing into elevated layers of biomass burning aerosol. These layers complicate efforts to use column-integrated satellite measurements to infer surface air quality. As expected, mixed layer height (MLH) typically increased significantly during the day; however, during some flights, particularly over the Houston area, MLH also showed large spatial variability associated with changes in surface cover and/or small scale circulations. Often HSRL-2 measurements of AOD also showed large spatial and temporal variability throughout the day over these cities. We discuss how the ozone and aerosol profiles are averaged over different vertical and horizontal scales near the surface for use in assessments of regional air quality models and near-surface ozone retrievals from NASA’s recently launched Tropospheric Emissions: Monitoring Pollution (TEMPO) satellite.

Lidar↗

HSRL-2 Observations over the Houston, TX Region during TRACER-AQ

During field missions in 2021 and 2023, the airborne NASA Langley Research Center High Spectral Resolution Lidar 2 (HSRL 2) measured the temporal and spatial evolution of ozone and aerosol distributions impacting urban air quality over the four most populated cities in the United States. HSRL-2 measurements in 2021 were acquired over the Houston metropolitan region, including Galveston Bay and the Houston Ship Channel, as part of the NASA Tracking Aerosol Convection Experiment – Air Quality (TRACER-AQ) mission conducted in collaboration with the Department of Energy. HSRL-2 measurements were acquired over Los Angeles, Chicago, and New York City in 2023 as part of the NASA Synergistic TEMPO Air Quality Science (STAQS) mission conducted in collaboration with the NOAA Atmospheric Emissions and Reactions Observed from Megacities to Marine Areas (AEROMMA) mission. HSRL 2 provided nadir vertical profiles of ozone, aerosol backscatter, extinction, and depolarization as the aircraft flew lawnmower type patterns at 9 km for several hours over these urban areas. HSRL-2 measured profiles of aerosol extinction and aerosol optical depth (AOD) via the HSRL technique at 355 and 532 nm and profiles of aerosol backscatter and depolarization at 355, 532, and 1064 nm. Mixed Layer Heights (MLH) were derived by locating sharp vertical gradients in the profiles of aerosol backscatter. The flights were comprised of up to three repeating lawnmower patterns over each city showing the evolution of the ozone and aerosol distributions from the morning through the afternoon. The HSRL-2 measurements reveal ozone enhancements near the surface as well as in the free troposphere above the mixed layer. Some lidar measurements over Chicago and New York City show the daytime boundary layer growing into elevated layers of biomass burning aerosol. These layers complicate efforts to use column-integrated satellite measurements to infer surface air quality. As expected, mixed layer height (MLH) typically increased significantly during the day; however, during some flights, particularly over the Houston area, MLH also showed large spatial variability associated with changes in surface cover and/or small scale circulations. Often HSRL-2 measurements of AOD also showed large spatial and temporal variability throughout the day over these cities. We discuss how the ozone and aerosol profiles are averaged over different vertical and horizontal scales near the surface for use in assessments of regional air quality models and near-surface ozone retrievals from NASA’s recently launched Tropospheric Emissions: Monitoring Pollution (TEMPO) satellite.

Lidar↗

Update on Area Production in Mixing of Supercritical Fluids

The focus of this research is on supercritical C7H16/N2 and O2/H2 mixing layers undergoing transitions to turbulence. The C7H16/N2 system serves as a simplified model of hydrocarbon/air systems in gas-turbine and diesel engines; the O2/H2 system is representative of liquid rocket engines. One goal of this research is to identify ways of controlling area production to increase disintegration of fluids and enhance combustion in such engines. As used in this research, "area production" signifies the fractional rate of change of surface area oriented perpendicular to the mass-fraction gradient of a mixing layer. In the study, a database of transitional states obtained from direct numerical simulations of the aforementioned mixing layers was analyzed to investigate global layer characteristics, phenomena in regions of high density-gradient magnitude (HDGM), irreversible entropy production and its relationship to the HDGM regions, and mechanisms leading to area production.

Okongo, Nora↗

Limitations in Representation of Physical Processes Prevents Successful Simulation of PM2.5 During KORUS-AQ

High levels of fine particulate matter (PM2.5) pollution in East Asia often exceed local air quality standards. Observations from the Korea United States-Air Quality (KORUS-AQ) field campaign in May and June 2016 showed that development of extreme pollution (haze) occurred through a combination of long-range transport and favorable meteorological conditions that enhanced local production of PM2.5. Atmospheric models often have difficulty simulating PM2.5 chemical composition during haze, which is of concern for the development of successful control measures. We use observations from KORUS-AQ to examine the ability of the GEOS-Chem chemical transport model to simulate PM2.5 composition throughout the campaign and identify the mechanisms driving the pollution event. At the surface, the model underestimates sulfate by -64% but overestimates nitrate by +36%. The largest underestimate in sulfate occurs during the pollution event, where models typically struggle to generate elevated sulfate concentrations due to missing heterogeneous chemistry in aerosol liquid water in the polluted boundary layer. Hourly surface observations show that the model nitrate bias is driven by an overestimation of the nighttime peak. In the model, nitrate formation is limited by the supply of nitric acid, which is biased by +100% against aircraft observations. We hypothesize that this is due to a large missing sink, which we implement here as a factor of five increase in dry deposition. We show that the resulting increased deposition velocity is consistent with observations of total nitrate as a function of photochemical age. The model does not account for factors such as the urban heat island effect or the heterogeneity of the built-up urban landscape resulting in insufficient model turbulence and surface area over the study area that likely results in insufficient dry deposition. Other species such as NH3 could be similarly affected but were not measured during the campaign. Nighttime production of nitrate is driven by NO2 hydrolysis in the model, while observations show that unexpectedly elevated nighttime ozone (not present in the model) should result in N2O5 hydrolysis as the primary pathway. The model is unable to represent nighttime ozone due to an overly rapid collapse of the afternoon mixed layer and excessive titration by NO. We attribute this to missing nighttime heating driving deeper nocturnal mixing that would be expected to occur in a city like Seoul. This urban heating is not considered in air quality models run at large enough scales to treat both local chemistry and long-range transport. Key model failures in simulating nitrate, mainly overestimated daytime nitric acid, incorrect representation of nighttime chemistry, and an overly shallow and insufficiently turbulent nighttime mixed layer, exacerbate the model’s inability to simulate the buildup of PM2.5 during haze pollution. To address the underestimate in sulfate most evident during the haze event, heterogeneous aerosol uptake of SO2 is added to the model which previously only considered aqueous production of sulfate from SO2 in cloud water. Implementing a simple parameterization of this chemistry improves the model abundance of sulfate but degrades the SO2 simulation implying that emissions are underestimated. We find that improving model simulations of sulfate has direct relevance to determining local vs. transboundary contributions to PM2.5. During the haze pollution event, the inclusion of heterogeneous aerosol uptake of SO2 decreases the fraction of PM2.5 attributable to long-range transport from 66% to 54%. Locally-produced sulfate increased from 1% to 25% of locally-produced PM2.5, implying that local emissions controls would have a larger effect than previously thought. However, this additional uptake of SO2 is coupled to the model nitrate prediction which affects the aerosol liquid water abundance and chemistry driving sulfate-nitrate-ammonium partitioning. An additional simulation of the haze pollution with heterogeneous uptake of SO2 to aerosol and simple improvements to the model nitrate simulation results in 30% less sulfate due to 40% less nitrate and aerosol water, and results in an underestimate of sulfate during the haze event. Future studies need to better consider the impact of model physical processes such as dry deposition and nighttime boundary layer mixing on the simulation of nitrate and the effect of improved nitrate simulations on the overall simulation of secondary inorganic aerosol (sulfate+nitrate+ammonium) in East Asia. Foreign emissions are rapidly changing, increasing the need to understand the impact of local emissions on PM2.5 in South Korea to ensure continued air quality improvements.

Katherine R. Travis↗

Estimating the Distribution of Colored Dissolved Organic Matter During the Southern Ocean Gas Exchange Experiment Using Four-Dimensional Variational Data Assimilation

We diagnosed the effect of various physical processes on the distribution of mixed-layer colored dissolved organic matter (CDOM) and a sulfur hexauoride (SF6) tracer during the Southern Ocean Gas Exchange Experiment (SO GasEx). The biochemical upper ocean state estimate uses in situ and satellite biochemical and physical data in the study region, including CDOM (absorption coefcient and spectral slope), SF6, hydrography, and sea level anomaly. Modules for photobleaching of CDOM and surface transport of SF6 were coupled with an ocean circulation model for this purpose. The observed spatial and temporal variations in CDOM were captured by the state estimate without including any new biological source term for CDOM, assuming it to be negligible over the 26 days of the state estimate. Thermocline entrainment and photobleaching acted to diminish the mixed-layer CDOM with time scales of 18 and 16 days, respectively. Lateral advection of CDOM played a dominant role and increased the mixed-layer CDOM with a time scale of 12 days, whereas lateral diffusion of CDOM was negligible. A Lagrangian view on the CDOM variability was demonstrated by using the SF6 as a weighting function to integrate the CDOM elds. This and similar data assimilation methods can be used to provide reasonable estimates of optical properties, and other physical parameters over the short-term duration of a research cruise, and help in the tracking of tracer releases in large-scale oceanographic experiments, and in oceanographic process studies.

Del Castillo, C. E.↗