Search NASA⌕ Search

SEARCH · Search NASA

Results for “Motivation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Economic Analysis in the Pacific Northwest Land Resources Project: Theoretical Considerations and Preliminary Results

The Pacific Northwest Land Resources Inventory Demonstration Project i s an a ttempt to combine a whole spectrum of heterogeneous geographic, institutional and applications elements in a synergistic approach to the evaluation of remote sensing techniques. This diversity is the prime motivating factor behind a theoretical investigation of alternative economic analysis procedures. For a multitude of reasons--simplicity, ease of understanding, financial constraints and credibility, among others--cost-effectiveness emerges as the most practical tool for conducting such evaluation determinatIons in the Pacific Northwest. Preliminary findings in two water resource application areas suggest, in conformity with most published studies, that Lands at-aided data collection methods enjoy substantial cost advantages over alternative techniques. The pntential for sensitivity analysis based on cost/accuracy tradeoffs is considered on a theoretical plane in the absence of current accuracy figures concerning the Landsat-aided approach.

Morse, D. R. A.↗

Experiments in sensing transient rotational acceleration cues on a flight simulator

Results are presented for two transient motion sensing experiments which were motivated by the identification of an anomalous roll cue (a 'jerk' attributed to an acceleration spike) in a prior investigation of realistic fighter motion simulation. The experimental results suggest the consideration of several issues for motion washout and challenge current sensory system modeling efforts. Although no sensory modeling effort is made it is argued that such models must incorporate the ability to handle transient inputs of short duration (some of which are less than the accepted latency times for sensing), and must represent separate channels for rotational acceleration and velocity sensing.

Parrish, R. V.↗

The HEAO-1 neutron star timing experiment

The HEAO-1 neutron star timing experiment is presented. The scientific motivation for the experiment, the reasons for the choice of Her X-1 and Vela X-1 as promising sources to study, the methodology, and the current status of the experiment are summarized.

Lamb, F. K.↗

Classification and mensuration of LACIE segments

The theory of classification methods and the functional steps in the manual training process used in the three phases of LACIE are discussed. The major problems that arose in using a procedure for manually training a classifier and a method of machine classification are discussed to reveal the motivation that led to a redesign for the third LACIE phase.

Heydorn, R. P.↗

Expanded interleaved solid-state memory for a wide bandwidth transient waveform recorder

An interleaved, solid state expanded memory for a 100 MHz bandwidth waveform recorder is described. The memory development resulted in a significant increase in the storage capacity of a commercially available recorder. The motivation for the memory expansion of the waveform recorder, which is used to support in-flight measurement of the electromagnetic characteristics of lightning discharges, was the need for a significantly longer data window than that provided by the commercially available unit. The expanded recorder provides a data window that is 128 times longer than the commercial unit, while maintaining the same time resolution, by increasing the storage capacity from 1024 to 131 072 data samples. The expanded unit operates at sample periods as small as 10 ns. Sampling once every 10 ns, the commercial unit records for about 10 microseconds before the memory is filled, whereas, the expanded unit records for about 1300 microseconds. A photo of the expanded waveform recorder is shown.

Thomas, R. M., Jr.↗

Commercialization of materials processing in space

The primary motivation of the Materials Processing in Space program is the scientific and commercial utilization of the effects of the unique environments of space on material processes. The reduction or elimination of the pervasive influences of gravity on Earth-based process mechanisms affords opportunities for understanding and improving ground-based processing or producing select materials in space which, typically, would be of low volume, high value commercial interest. Additionally, the unlimited, if not 'hard' vacuum of space affords equally interesting influences on material processes. To evolve the commercialization of Materials Processing in Space, the program seeks to establish and demonstrate the scientific/technological precepts for analyzing and using the space environment and, in parallel, to establish the legal and management mechanisms to implement commercial ventures.

Zoller, L. K.↗

Two-dimensional electrostatic turbulence with variable density and pressure

Large-scale turbulence transverse to a uniform dc magnetic field is considered from the point of view of a two-fluid model of an electrostatic plasma of variable density. An approximation motivated by 'geostrophic' techniques of dynamic meteorology is introduced. It is argued that the inverse cascade phenomenon should persist in the presence of variable pressure and density.

Montgomery, D.↗

Airborne spacecraft - A remotely powered, high-altitude RPV for environmental applications

A high-altitude, unmanned, propeller-driven electric airplane is proposed for remote sensing of environmental phenomena. With motive power from surface-mounted solar arrays or microwave receivers, flight endurance of weeks to months could be anticipated. The proposed system offers unique capability for monitoring oceanic and atmospheric characteristics on local or regional scales. Coastal marine and tropospheric research activities, which require temporal resolutions of 2-72 hours, would be prime application areas. Potential missions might include the monitoring of ocean disposals, episodic marine biological events, and river/ocean interactions. Preliminary sizing and performance calculations are presented along with possible mission scenarios and payload complements.

Youngblood, J. W.↗

Modulation of terrestrial ion escape flux composition /by low-altitude acceleration and charge exchange chemistry/

Motivated by recent observations of highly variable hot plasma composition in the magnetosphere, control of the ionospheric escape flux composition by low-altitude particle dynamics and ion chemistry has been investigated for an e(-), H(+), O(+) ionosphere. It is found that the fraction of the steady state escape flux which is O(+) can be controlled very sensitively by the occurrence of parallel or transverse ion acceleration at altitudes below the altitude where the neutral oxygen density falls rapidly below the neutral hydrogen density and the ionospheric source of O(+) tends to be rapidly converted by charge exchange to H(+). The acceleration is required both to overcome the gravitational confinement of O(+) and to violate charge exchange equilibrium so that the neutral hydrogen atmosphere appears 'optically' thin to escaping O(+). Constraints are placed on the acceleration processes, and it is shown that O(+) escape is facilitated by observed ionospheric responses to magnetic activity.

Moore, T. E.↗

Diagnosis without repair for hybrid fault situations

In the present paper, the concept of a hybrid fault situation is introduced, which specifies bounded combinations of permanently faulty and intermittently faulty units in a system. The general class of hybrid fault situations includes, as special cases, the all permanent fault case and the unrestricted intermittent fault case, which have been previously considered with PMC models. An approach compatible with the diagnosis of permanent fault situations is then applied to the diagnosis of hybrid fault situation. The motivation for doing so is the common practice of testing for the presence of intermittent faults in systems by means of repeated applications of tests that are designed for the detection of permanent faults. The testing assignment of PMC models of system is characterized, and interrelationships between the number of intermittently and permanently faulty units that can be diagnosed is established.

Mallela, S.↗

Influence of antimisting polymer on aviation fuel breakup

Experiments have been performed to determine the influence of a moving airstream on jet and drop breakup of fuel containing small concentrations of antimisting polymers. This study was motivated by the needs to inhibit the ignition of fuel during a survivable aircraft crash landing. High speed motion pictures of initial deformation rates and instant pictures of initial deformation rates and instant pictures of the drop breakup suggest that the enormous resistance to the sudden deformation of fuel containing antimisting polymer is related to the development of high tensile viscosity, even though the shear viscosity is not markedly affected. Study of a pendant drop fiber was undertaken to determine this tensile viscosity of antimisting fuel as a function of temperature and of polymer concentration.

Sarohia, V.↗

Tests of 38 Ball-Bearing Greases

Report presents interim results in program of long-term tests of ball-bearing greases in vacuum, oxidizing, and otherwise hostile environment. Program is motivated by need for mechanisms that will operate for long periods in spacecraft or space stations. Class of lubricants based on perfluoroalkylpolyether (PFPE) with fluorotelomer thickeners has given best results in vacuum tests completed thus far. Test methods and performances of various lubricants could be of interest in automotive and industrial communities.

Mcmurtrey, E. L.↗

MSFC personnel management tasks: Recruitment and orientation of new employees

In order to encourage highly motivated young students to learn about NASA and consider it for a career, a formal program is to be initiated whereby selected students can work on a voluntary basis at Marshall Space Flight Center (MSFC). The first task was to develop the working plan and procedures for this program, called Student Volunteer Service Program, in the writing of MSFC official guidelines, the Marshall Management Instruction (the MMI) which is a binding document that defines policy and establishes procedures and guidelines. Particular considerations written into the MMI after numerous consultations, interviews, and discussions about a satisfactory policy, include: arrangements to be made between the student, the school authorities, and concerned MSFC employees; management of the work assignments; and procedures for the student's welfare and safety. The second task was the development of a recruitment brochure for the attraction of new employees, especially scientists and engineers. The third task assigned was to develop a plan called Orientation of New Employees.

Brindley, T. A.↗

Housing authority of Baltimore City-Public Housing Energy Workshop

The NASA/Baltimore Applications Project operating at the Goddard Space Flight Center was called upon by the Housing Authority of Baltimore City to consider the problems of providing low cost public housing because of increased energy costs and suggest methods for correction and alleviation. The first step chosen was to elicit as many different options for solution as possible through means of a Public Housing Energy Workshop held in Easton, Md. in September 1980. A final role for the Workshop was a listing and qualifying of each alternative as to its suitability and cost. Specific areas were examined by three panels: (1) Systems, (2) Conservation and Motivation, and (3) Fuels. Each panel was made up of persons from differing but appropriate backgrounds; membership was not restricted to housing people alone. A summary of their deliberations is given - it will be used as a stepping stone to further selection and implementation of alternatives.

Golden, T. S.↗

Preliminary Report: Issues in selection and training for long duration space flight

Based on previous experience with crew selection, three important avenues of consideration for future missions are discussed: technical qualifications and expertise; medical fitness and ability to tolerate the various conditions of space; and psychological considerations including personality structure, motivation, intelligence, leadership potential, group compatibility, etc. Primary emphasis was given to the psychological considerations.

Akins, F. R.↗

Quantum chemical calculation of the equilibrium structures of small metal atom clusters

A decomposition of the molecular energy is presented that is motivated by the atom superposition and electron delocalization physical model of chemical binding. The energy appears in physically transparent form consisting of a classical electrostatic interaction, a zero order two electron exchange interaction, a relaxation energy, and the atomic energies. Detailed formulae are derived in zero and first order of approximation. The formulation extends beyond first order to any chosen level of approximation leading, in principle, to the exact energy. The structure of this energy decomposition lends itself to the fullest utilization of the solutions to the atomic sub problems to simplify the calculation of the molecular energy. If nonlinear relaxation effects remain minor, the molecular energy calculation requires at most the calculation of two center, two electron integrals. This scheme thus affords the prospects of substantially reducing the computational effort required for the calculation of molecular energies.

Kahn, L. R.↗

Two-dimensiosnal electron beam charging model for polymer films

A two dimensional model was developed to describe the charging of thin polymer films exposed to a uniform mon-energetic electron beam. The study was motivated by observed anomalous behavior of geosynchronous satellites which was attributed to electrical discharges associated with the differential charging of satellite surfaces of magnetospheric electrons. Electric fields both internal and external to the irradiated specimen were calculated at steady state in order to identify regions of high electrical stress. Particular emphasis was placed on evaluating the charging characteristics near the material's edge. The model was used to identify and quantify the effects of some of the experimental parameters notably: beam energy; beam angle of incidence; beam current density; material thickness; and material width. Simulations of the following situations were also conducted: positive or negative precharging over part of the surface; a central gap in the material; and a discontinuity in the material's thickness.

Reeves, R. D.↗

Numerical prediction of vortex cores of the leading and trailing edges of delta wings

The purpose of the present paper is to predict the roll-up of the vortex sheets emanating from the leading- and trailing-edges of delta wings with emphasis on the interaction of vortex cores beyond the trailing edge. The motivation behind the present work is the recent experimental data published by Hummel. The Nonlinear Discrete-Vortex method (NDV-method) is modified and extended to predict the leading- and trailing-vortex cores beyond the trailing edge. The present model alleviates the problems previously encountered in predicting satisfactory pressure distributions. This is accomplished by lumping the free-vortex lines during the iteration procedure. The leading- and trailing-edge cores and their feeding sheets are obtained as parts of the solution. The numerical results show that the NDV-method is successful in confirming the formation of a trailing-edge core with opposite circulation and opposite roll-up to those of the leading-edge core. This work is a breakthrough in the high angle of attack aerodynamics and moreover, it is the first numerical prediction done on this problem

Kandil, O. A.↗