Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nonlinear control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Non-linear generation of acoustic noise in the IAR spacecraft

The requirement to produce high level acoustic noise fields with increasing accuracy in environmental test facilities dictates that a more precise understanding is required of the factors controlling nonlinear noise generation. Details are given of various nonlinear effects found in acoustic performance data taken from the IAR Spacecraft Acoustic Chamber. This type of data has enabled the IAR to test large spacecraft to relatively tight acoustic tolerances over a wide frequency range using manually set controls. An analog random noise automatic control system was available and modified to provide automatic selection of the chamber's spectral sound pressure levels. The automatic control system when used to complete a typical qualification test appeared to equal the accuracy of the manual system and had the added advantage that parallel spectra could be easily achieved during preset tests.

Westley, R.↗
NASA NTRS1985

Bifurcation techniques for nonlinear dynamic analysis of compressor stall phenomena

Compressor stall phenomena is analyzed from nonlinear control theory viewpoint, based on bifurcation-catastrophe techniques. This new approach appears promising and offers insight into such well known compressor instability problems as surge and rotating stall; furthermore it suggests strategies for recovery from stall. Three interlocking dynamic nonlinear state space models are developed. It is shown that the problem of rotating stall can be viewed as an (induced) bifurcation of solution of the unstalled model. Hysteresis effect is shown to exist in the stall/recovery process. Surge cycles are observed to develop for some critical parameter values. It is shown that the oscillatory behavior is due to development of limit cycles, generated by Hopf bifurcation of solutions. Both stable and unstable limit cycles are observed. To further illustrate the usefulness of the methodology some partial computation of domains of attraction of equilibria is carried out, and parameter sensitivity analysis is performed.

Razavi, H. C.↗
NASA NTRS1990

Control of submersible vortex flows

Vortex flows produced by submersibles typically unfavorably influence key figures of merit such as acoustic and nonacoustic stealth, control effectiveness/maneuverability, and propulsor efficiency/body drag. Sources of such organized, primarily longitudinal, vorticity include the basic body (nose and sides) and appendages (both base/intersection and tip regions) such as the fairwater, dive planes, rear control surfaces, and propulsor stators/tips. Two fundamentally different vortex control approaches are available: (1) deintensification of the amplitude and/or organization of the vortex during its initiation process; and (2) downstream vortex disablement. Vortex control techniques applicable to the initiation region (deintensification approach) include transverse pressure gradient minimization via altered body cross section, appendage dillets, fillets, and sweep, and various appendage tip and spanload treatment along with the use of active controls to minimize control surface size and motions. Vortex disablement can be accomplished either via use of control vortices (which can also be used to steer the vortices off-board), direct unwinding, inducement of vortex bursting, or segmentation/tailoring for enhanced dissipation. Submersible-applicable vortex control technology is also included derived from various aeronautical applications such as mitigation of the wing wake vortex hazard and flight aircraft maneuverability at high angle of attack as well as the status of vortex effects upon, and mitigation of, nonlinear control forces on submersibles. Specific suggestions for submersible-applicable vortex control techniques are presented.

Bushnell, D. M.↗
NASA NTRS1996

Pointing and Scanning Control of Optical Instruments using Rotating Unbalanced Masses

Correct pointing direction and scanning motions are essential in the operation of many flight payloads, such as balloon-borne telescopes and space-based X- ray and gamma-ray telescopes. Rotating unbalanced mass (RUM) devices have been recently proposed, implemented and successfully tested to produce a variety of scanning motions. Linear scans, raster scans, and circular scans have been successfully generated on a gimbaled payload using pairs of RUM devices. Theoretical analysis, computer simulations, and experiments have also been used to study the feasibility of using RUM devices to control instrument pointing direction, in addition to generating scanning motion. Dynamic modeling of a gimbaled payload equipped with a pair of RUM devices has been studied, and preliminary testing indicates that the pointing control is indeed feasible. However, there is also great potential for significant performance improvements through more advanced control system analysis, modeling and design. In this paper, modeling and control methods are described to achieve simultaneous scanning and pointing control of a gimbaled payload using rotating unbalance mass (RUM) devices. The model development work builds upon the results of Polites et al. and also some modeling approaches from robotics research. Results of some preliminary experiments are discussed and some nonlinear control methods will be proposed.

Bishop, Carlee A.↗
NASA NTRS1996

A Robust Digital Autopilot for Spacecraft Equipped with Pulse-Operated Thrusters

The analysis and design of attitude control systems for spacecraft employing pulse-operated (on-off) thrusters is usually accomplished through a combination of modeling approximations and empirical techniques. In this paper a new thruster pulse-modulation scheme for pointing and tracking applications is developed from nonlinear control theory.

attitude control spacecraft thrusters control theo↗
NASA NTRS2001

Use of Soft Computing Technologies for a Qualitative and Reliable Engine Control System for Propulsion Systems

The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to improve overall vehicle system safety, reliability, and rocket engine performance by development of a qualitative and reliable engine control system (QRECS). Specifically, this will be addressed by enhancing rocket engine control using SCT, innovative data mining tools, and sound software engineering practices used in Marshall's Flight Software Group (FSG). The principle goals for addressing the issue of quality are to improve software management, software development time, software maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control methodologies, but to provide alternative design choices for control, implementation, performance, and sustaining engineering, all relative to addressing the issue of reliability. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion (system level), software engineering for embedded flight software systems, and soft computing technologies (i.e., neural networks, fuzzy logic, data mining, and Bayesian belief networks); some of which are briefed in this paper. For this effort, the targeted demonstration rocket engine testbed is the MC-1 engine (formerly FASTRAC) which is simulated with hardware and software in the Marshall Avionics & Software Testbed (MAST) laboratory that currently resides at NASA's Marshall Space Flight Center, building 4476, and is managed by the Avionics Department. A brief plan of action for design, development, implementation, and testing a Phase One effort for QRECS is given, along with expected results. Phase One will focus on development of a Smart Start Engine Module and a Mainstage Engine Module for proper engine start and mainstage engine operations. The overall intent is to demonstrate that by employing soft computing technologies, the quality and reliability of the overall scheme to engine controller development is further improved and vehicle safety is further insured. The final product that this paper proposes is an approach to development of an alternative low cost engine controller that would be capable of performing in unique vision spacecraft vehicles requiring low cost advanced avionics architectures for autonomous operations from engine pre-start to engine shutdown.

Trevino, Luis↗
NASA NTRS2014

Tool for Turbine Engine Closed-Loop Transient Analysis (TTECTrA) Users' Guide

The tool for turbine engine closed-loop transient analysis (TTECTrA) is a semi-automated control design tool for subsonic aircraft engine simulations. At a specific flight condition, TTECTrA produces a basic controller designed to meet user-defined goals and containing only the fundamental limiters that affect the transient performance of the engine. The purpose of this tool is to provide the user a preliminary estimate of the transient performance of an engine model without the need to design a full nonlinear controller.

systems analysis↗
DOE OSTI2021

Application of real‐time nonlinear model predictive control for wave energy conversion

Abstract This article presents an approach to implement a Nonlinear Model Predictive Controller (NMPC) in real‐time with a non‐standard cost index. The proposed technique's applications are presented to maximize the energy produced by a Wave Energy Converter (WEC) when the cost index is a non‐quadratic piecewise discontinuous functional of some design variables. The presented framework is based on pseudo‐quadratisation and weight scheduling, which is implemented using the ACADO toolkit for MATLAB/Simulink. The proposed strategy features code generation and deployment on the real‐time target machines for industrial applications. The simulations and experiments confirm the success of the proposed approach in achieving the feasible operation of the NMPC and an optimal power capture by the wave energy converters.

16 TIDAL AND WAVE POWER↗
NASA NTRS1993

Further studies using matched filter theory and stochastic simulation for gust loads prediction

This paper describes two analysis methods - one deterministic, the other stochastic - for computing maximized and time-correlated gust loads for aircraft with nonlinear control systems. The first method is based on matched filter theory; the second is based on stochastic simulation. The paper summarizes the methods, discusses the selection of gust intensity for each method and presents numerical results. A strong similarity between the results from the two methods is seen to exist for both linear and nonlinear configurations.

Scott, Robert C.↗
NASA NTRS1993

Further studies using matched filter theory and stochastic simulation for gust loads prediction

This paper describes two analysis methods -- one deterministic, the other stochastic -- for computing maximized and time-correlated gust loads for aircraft with nonlinear control systems. The first method is based on matched filter theory; the second is based on stochastic simulation. The paper summarizes the methods, discusses the selection of gust intensity for each method and presents numerical results. A strong similarity between the results from the two methods is seen to exist for both linear and nonlinear configurations.

Scott, Robert C.↗
DOE OSTI2023

Deep-Learning-Based Koopman Modeling for Online Control Synthesis of Nonlinear Power System Transient Dynamics

Power system stability and control have become more challenging due to the increasing uncertainty associated with renewable generation. Here, the performance of conventional control is highly driven by the physics-based offline-developed dynamic models that can deviate from the actual system characteristics under different operating conditions and/or configurations. Data-driven approaches based on online measurements can be a better solution to addressing these issues by capturing real-time operation conditions. This article describes a novel fully data-driven probabilistic framework to derive a linear representation of postcontingency grid dynamics and online prescribe control based on the derived model to enhance transient stability. The complex nonlinear power system dynamics is approximated by a linear model by using multiple neural network modules that infer distributions of the observations and introducing a Koopman layer to sample possible Koopman linear models from the inferred distributions. The trained model features linearity that can be easily incorporated into the existing linear control design paradigm and ease the controller design process. The effectiveness of Koopman-based control designs is validated through comparative case studies, which demonstrate increased prediction accuracy and control performance when applied to a power system with heterogeneous generator dynamics.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1982

Global differential geometry: An introduction for control engineers

The basic concepts and terminology of modern global differential geometry are discussed as an introduction to the Lie theory of differential equations and to the role of Grassmannians in control systems analysis. To reach these topics, the fundamental notions of manifolds, tangent spaces, vector fields, and Lie algebras are discussed and exemplified. An appendix reviews such concepts needed for vector calculus as open and closed sets, compactness, continuity, and derivative. Although the content is mathematical, this is not a mathematical treatise but rather a text for engineers to understand geometric and nonlinear control.

Doolin, B. F.↗
DOE OSTI2022

Wave energy converter buoy with variable geometry

A nonlinear control design technique capitalizes on a wave energy converter comprising a shaped buoy having a variable geometry wave energy. For example, the shaped buoy can have an hourglass (HG) geometry having a variable cone or steepness angle. The HG buoy is assumed to operate in the heave motion of the wave. The unique interaction between the HG buoy and the wave creates a nonlinear cubic storage effect that produces actual energy storage or reactive power during operation. A multi-frequency Bretschneider spectrum wave excitation input was simulated for the HG design both with constant and varying steepness angle profiles which demonstrated further increased power generation with changing sea states for the variable design.

Wilson, David G.↗
NASA NTRSDate not supplied

Improvements in Iterative Convergence of FUN3D Solutions

This paper presents a hierarchical adaptive nonlinear iteration method (HANIM) implemented in NASA computational fluid dynamics code, FUN3D, to improve robustness and computational efficiency of FUN3Dsolutions. In contrast to the baseline iterative solver that relies on an approximate Jacobian, a simple multicolor Gauss-Seidel point-implicit iteration scheme, and linear CFL ramping, HANIM is based upon a hierarchy of modules including pre conditioner, generalized conjugate residual, realizability check, nonlinear control,and CFL adaption modules. HANIM performance is systematically compared with the performance of the baseline solver. The iterative solutions are compared for three aerodynamic benchmark cases: a subsonic separated flow around a hemisphere cylinder, a supersonic flow through a long duct, and a subsonic flow over the NASA wing-body juncture model. Two Reynolds-averaged Navier-Stokes turbulence models are used in these computations, namely, the negative variant of the linear one-equation Spalart-Allmar as model and its nonlinear extension based on quadratic constitutive relations.

Li Wang↗
NASA NTRS1971

Direct modeling parameter signature analysis and failure mode prediction of physical systems using hybrid computer optimization

High speed automated identification and design of dynamic systems, both linear and nonlinear, are discussed. Special emphasis is placed on developing hardware and techniques which are applicable to practical problems. The basic modeling experiment and new results are described. Using the improvements developed successful identification of several systems, including a physical example as well as simulated systems, was obtained. The advantages of parameter signature analysis over signal signature analysis in go-no go testing of operational systems were demonstrated. The feasibility of using these ideas in failure mode prediction in operating systems was also investigated. An improved digital controlled nonlinear function generator was developed, de-bugged, and completely documented.

Drake, R. L.↗
NASA NTRSDate not supplied

Improvements in Iterative Convergence of FUN3D Solutions

This paper presents a hierarchical adaptive nonlinear iteration method (HANIM) implemented in the NASA computational fluid dynamics code, FUN3D, to improve robustness and computational efficiency. In contrast to the legacy FUN3D iterative solver that relies on an approximate Jacobian, a simple multicolor Gauss-Seidel point-implicit iteration scheme, and linear Courant-Friedrichs-Lewy number (CFL) ramping, HANIM is based upon a hierarchy of modules including preconditioner, generalized conjugate residual, realizability check, nonlinear control, and CFL adaption modules. HANIM performance is systematically compared with the performance of the legacy solver of FUN3D and a baseline solver based on a preconditioner alone. Iterative solutions are compared for three benchmark cases: a subsonic separated flow around a hemisphere cylinder, a supersonic flow through a long duct, and a subsonic flow over the NASA wing-fuselage juncture model. Two Reynolds-averaged Navier-Stokes turbulence models are used in these computations, namely, the negative variant of the linear one-equation Spalart-Allmaras model and its nonlinear extension based on quadratic constitutive relations.

CFD↗
DOE OSTI2022

Dryness controls temperature-optimized gross primary productivity across vegetation types

Temperature response of gross primary productivity (GPP) is a well-known property of ecosystem, but GPP at the optimum temperature (GPP_T opt ) has not been fully discussed. Our understanding of how GPP_T opt responds to warming and water availability is highly limited. Here, in this study, we analyzed data at 326 globally distributed eddy covariance sites (79°N-37°S), to identify controlling factors of GPP_T opt . Although GPP_T opt was significantly influenced by soil moisture, global solar radiation, mean annual temperature, and vapor pressure deficit in a non-linear pattern (R 2 = 0.47), the direction and magnitude of these climate variables’ effects on GPP_T opt depend on the dryness index (DI), a ratio of potential evapotranspiration to precipitation. The spatial pattern showed that soil moisture did not affect GPP_T opt across energy-limited sites with DI < 1 while dominated GPP_T opt across water-limited sites with DI >1. The temporal pattern showed that GPP_T opt was lowered by warming or low precipitation in water-limited sites while energy-limited sites tended to maintain a stable GPP_T opt regardless of changes in air temperature. Vegetation types in humid climates tended to have higher GPP_T opt and were more likely to benefit from a warmer climate since it was not restricted by water conditions. This study highlights that the response of GPP_T opt to global warming depends on the dryness conditions, which explains the nonlinear control of water and temperature over GPP_T opt . Our finding is essential to realistic prediction of terrestrial carbon uptake under future climate and vegetation conditions.

54 ENVIRONMENTAL SCIENCES↗