Summary of revised gust-velocity data obtained from V-G records taken on civil transport airplanes from 1933 to 1950
Explore the source record for details and available documents.
GUSTS, ATMOSPHERIC↗
SEARCH · Search NASA
Results for “OPERATIONAL PROBLEM”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Gust loads and operating airspeeds of one type of four-engine transport airplane on three routes from 1949 to 1953
Explore the source record for details and available documents.
GUSTS, ATMOSPHERIC↗
Conversion of inviscid normal-force coefficients in helium to equivalent coefficients in air for simple shapes at hypersonic speeds
A correlation factor applicable for converting inviscid aerodynamic normal-force coefficients of simple shapes in helium to equivalent coefficients in air is found by using calculations based on the shock-expansion method at Mach numbers of 12, 16, and 20.
RESEARCH TECHNIQUE - OPERATING PROBLEMS↗
An analysis of airspeed, altitude, and acceleration data obtained from a twin-engine transport airplane operated over a feeder-line route in the Rocky Mountains
Time-history data of airspeed, altitude, and acceleration obtained with the NACA VGH recorder from a twin-engine airplane operated by a regional feeder airline in the Rocky Mountains are evaluated to determine the magnitude and frequency of occurrence of gusts and gust accelerations and the operating airspeeds and altitudes. The results obtained are compared with the results previously obtained from a representative short-haul and long-haul operation.
OPERATING PROBLEMS↗
Investigation of a Full-scale, Cascade-type Thrust Reverser
A double set of turning vanes was carried inside the jet tailpipe. To produce reverse thrust, the tailpipe opens into two side sections and the turning vanes move outward to form a V-shaped cascade, which deflects the exhaust-gas flow. Forward and reverse net thrust were measured over a range of engine speeds with the airplane stationary. Taxi tests were made to determine the comparative stopping distances using wheel braking and reverse thrust separately, and a combination of both. The effect of turning-vane spacing on thrust-reverser performance was determined by scale-model tests using unheated air.
ENGINES, TURBOJET↗
Exploratory Study of Ground Proximity Effects on Thrust of Annular and Circular Nozzles
The proximity of the ground to an annular nozzle can result in thrust augmentation of up to 50 percent. The magnitude of thrust augmentation was a function of ground-to-nozzle distance, nozzle configuration, and nozzle pressure ratio. With a conventional circular nozzle a thrust reduction of 15 to 40 percent due to ground effect was obtained. The degree of thrust reduction was primarily a function of nozzle pressure ratio and ground-to-nozzle distance.
BOOSTER SYSTEMS AUXILIARY - GAS TURBINES↗
A Flight Investigation of the Effects of Varied Lateral Damping on the Effectiveness of a Fighter Airplane as a Gun Platform
Flight tests were conducted at three conditions of damping and two atmospheric turbulence levels with fixed-reticle, gyro computing, and telescopic gunsights. Results of simulated strafing runs indicate that the gun-line dispersion could be expected to be decreased about 7 percent by increased lateral damping and to be increased about 85 percent by decreased damping and about 40 percent by rough air of the type encountered. Use of the telescopic sight indicated a 20-percent decrease in gun-line dispersion.
OPERATING PROBLEMS, PHYSIOLOGICAL↗
Drop Hammer Tests with Three Oleo Strut Models and Three Different Shock Strut Oils at Low Temperatures
Drop hammer tests with different shock strut models and shock strut oils were performed at temperatures ranging to -40 C. The various shock strut models do not differ essentially regarding their springing and damping properties at low temperatures; however, the influence of the different shock strut oils on the springing properties at low temperatures varies greatly.
LUBRICATING OILS, MINERAL↗
Survey of lift-fan aerodynamic technology
Representatives of NASA Ames Research Center asked that a summary of technology appropriate for lift-fan powered short takeoff/vertical landing (STOVL) aircraft be prepared so that new programs could more easily benefit from past research efforts. This paper represents one of six prepared for that purpose. The authors have conducted or supervised the conduct of research on lift-fan powered STOVL designs and some of their important components for decades. This paper will first address aerodynamic modeling requirements for experimental programs to assure realistic, trustworthy results. It will next summarize the results or efforts to develop satisfactory specialized STOVL components such as inlets and flow deflectors. It will also discuss problems with operation near the ground, aerodynamics while under lift-fan power, and aerodynamic prediction techniques. Finally, results of studies to reduce lift-fan noise will be presented. The paper will emphasize results from large scale experiments, where available, for reasons that will be brought out in the discussion. Some work with lift-engine powered STOVL aircraft is also applicable to lift-fan technology and will be presented herein. Small-scale data will be used where necessary to fill gaps.
Hickey, David H.↗
Force override rate control for robotic manipulators
The work reported deals with the problem of operating a robot manipulator under a rate control mode while the end effector is not in contact with the external environment, and then switching to a force control mode when contact is made. The paper details how the modal changeover may be accomplished in a manner transparent to the operator, and will allow operator applied forces to be reflected at the robot end effector. A one degree of freedom demonstration system is used to illustrate the concept, which is then applied to a PUMA manipulator. Sample code for the implementation of the control is provided, experimental results show that the optimum setting for the gain is a function of the compliance of the end effector, and the compliance of the external constraint.
Driels, Morris↗
Surgery applications of virtual reality
Virtual reality is a computer-generated technology which allows information to be displayed in a simulated, bus lifelike, environment. In this simulated 'world', users can move and interact as if they were actually a part of that world. This new technology will be useful in many different fields, including the field of surgery. Virtual reality systems can be used to teach surgical anatomy, diagnose surgical problems, plan operations, simulate and perform surgical procedures (telesurgery), and predict the outcomes of surgery. The authors of this paper describe the basic components of a virtual reality surgical system. These components include: the virtual world, the virtual tools, the anatomical model, the software platform, the host computer, the interface, and the head-coupled display. In the chapter they also review the progress towards using virtual reality for surgical training, planning, telesurgery, and predicting outcomes. Finally, the authors present a training system being developed for the practice of new procedures in abdominal surgery.
Rosen, Joseph↗
Real-time expert system diagnostics and monitoring for the High Resolution Microwave Survey Targeted Search
An automated monitoring and diagnostics system (MDS) using virtual real-time software was developed for NASA's High Resolution Microwave Survey (HRMS) Targeted Search System (TSS). The four main tasks required of the MDS were monitoring and recording system health, alerting operators of problems, diagnosing poor system performance, and performing an emergency system shutdown. The MDS was implemented using commercial expert system software tools in addition to interface hardware and software developed on site. The expert system used objects, rules, and schematics in its TSS knowledge representation. The MDS was successfully integrated into the HRMS computer environment, and its performance met or exceeded its requirements.
Macalou, A.↗
Gulf offshore satellite applications project (GOSAP) (ERS-1 Pilot Project PP-USA-1)
Project GOSAP is a multi organizational effort to determine how best to use remote sensing technology, and ERS-1 data in particular, to address offshore problems and operations faced by the exploration and marine engineering industries, in the Gulf of Mexico. Remotely sensed data integrated with sea truth are used to quantify meteorologic and oceanographic events, to detect and track ocean currents and gyres, to image the sea floor, map subsurface geology, or detect oil seeps from orbital altitudes. Participants are evaluating the potential for satellite based offshore exploration, ocean engineering, and environmental applications using combined satellite and airborne measurements constrained by real time sea truth.
Biegert, E. K.↗
Project GOSAP (PP-USA.1): Gulf offshore satellite applications project
The Gulf offshore satellite applications project (GOSAP) was carried out in order to determine how best to use remote sensing technology to address offshore problems and operations faced by marine engineering organizations. The potentials of satellite-based offshore exploration, ocean engineering and environmental applications using combined satellite and airborne measurements are investigated. The applications include the detection of oil slicks.
Biegert, E. K.↗
Electrical Impact of SiC Structural Crystal Defects on High Electric Field Devices
Commercial epilayers are known to contain a variety of crystallographic imperfections. including micropipes, closed core screw dislocations. low-angle boundaries, basal plane dislocations, heteropolytypic inclusions, and non-ideal surface features like step bunching and pits. This paper reviews the limited present understanding of the operational impact of various crystal defects on SiC electrical devices. Aside from micropipes and triangular inclusions whose densities have been shrinking towards manageably small values in recent years, many of these defects appear to have little adverse operational and/or yield impact on SiC-based sensors, high-frequency RF, and signal conditioning electronics. However high-power switching devices used in power management and distribution circuits have historically (in silicon experience) demanded the highest material quality for prolonged safe operation, and are thus more susceptible to operational reliability problems that arise from electrical property nonuniformities likely to occur at extended crystal defects. A particular emphasis is placed on the impact of closed-core screw dislocations on high-power switching devices, because these difficult to observe defects are present in densities of thousands per cm,in commercial SiC epilayers. and their reduction to acceptable levels seems the most problematic at the present time.
Neudeck, Philip G.↗
How Surface Treatments Enhance Ground Handling
Several runway surface treatments developed in recent years are described in terms of how aircraft tire landing and takeoff friction requirements are met, particularly during adverse weather conditions. Changing the surface texture with grooving, grinding and shot peening, use of chemicals to remove or prevent accumulation of natural or man-made contaminants, and the use of new techniques and materials are discussed as means of improving surface friction performance. Test data are presented to illustrate the effects of runway conditions on aircraft ground performance. The severity of the problem of operating on runway surfaces which cannot provide sufficient aircraft tire friction capability is also illustrated from documented aircraft accident/incident reports. The paper concludes with recommendations for future pavement research activities.
Yager, Thomas J.↗
High Temperature Permeability of Carbon Cloth Phenolic Composite
The carbon fiber phenolic resin composite material used for the RSRM nozzle insulator occasionally experiences problems during operation from pocketing or spalling-like erosion and lifting of plies into the char layer. This phenomenon can be better understood if the permeability of the material at elevated temperatures is well defined. This paper describes an experimental approach to determining high temperature permeability of the carbon phenolic material used as the RSRM nozzle liner material. Two different approaches were conducted independently using disk and bar type specimens with the designed permeability apparatus. The principle of the apparatus was to subject a test specimen to a high pressure differential and a heat supply and to monitor both the pressure and temperature variations resulting from gas penetration through the permeable wall between the two chambers. The bar types, especially designed to eliminate sealing difficulties at a high temperature environment, were directly exposed to real time temperature elevation from 22 C to 260 C during the test period. The disk types were pre-heat treated up to 300 C for 8 hours and cooled to room temperature before testing. Nonlinear variation of downstream pressure at a certain temperature range implied moisture release and matrix pyrolysis. Permeability was calculated using a semi-numerical model of quasi-steady state. The test results and the numerical model are discussed in the paper.
Park, O. Y.↗
Nickel-Hydrogen and Lithium Ion Space Batteries
The tasks of the Electrochemistry Branch of NASA Glenn Research Center are to improve and develop high energy density and rechargeable, life-long batteries. It is with these batteries that people across the globe are able to power their cell phones, laptop computers, and cameras. Here, at NASA Glenn Research Center, the engineers and scientists of the Electrochemistry branch are leading the way in the development of more powerful, long life batteries that can be used to power space shuttles and satellites. As of now, the cutting edge research and development is being done on nickel-hydrogen batteries and lithium ion batteries. Presently, nickel-hydrogen batteries are common types of batteries that are used to power satellites, space stations, and space shuttles, while lithium batteries are mainly used to power smaller appliances such as portable computers and phones. However, the Electrochemistry Branch at NASA Glenn Research Center is focusing more on the development of lithium ion batteries for deep space use. Because of the limitless possibilities, lithium ion batteries can revolutionize the space industry for the better. When compared to nickel-hydrogen batteries, lithium ion batteries possess more advantages than its counterpart. Lithium ion batteries are much smaller than nickel-hydrogen batteries and also put out more power. They are more energy efficient and operate with much more power at a reduced weight than its counterpart. Lithium ion cells are also cheaper to make, possess flexibility that allow for different design modifications. With those statistics in hand, the Electrochemistry Branch of NASA Glenn has decided to shut down its Nickel-Hydrogen testing for lithium ion battery development. Also, the blackout in the summer of 2003 eliminated vital test data, which played a part in shutting down the program. from the nickel-hydrogen batteries and compare it to past data. My other responsibilities include superheating the electrolyte that is used in the nickel-hydrogen cell in a calorimeter to test its performance under various conditions. 1 used a program called Arbin to study my data. The Arbin allows me to look at different parameters such as pressure and time and how they affect the changing temperature of the electrolyte that is being tested. In addition, I had the responsibility of taking apart and modifying battery coolers that would be used. My mentors told me that the batteries kept shutting down, so it was my responsibility to remove excess fan grilles, rotate the fans, and then switch the aluminum standoffs with nylon ones so that the coolers could operate without problems. My last task is to collect all the battery test data and organize them into charts using Microsoft Excel, before the Branch is able to conduct its research on lithium ion batteries. Therefore, during my tenure, it is my responsibility to take down final test data
Reid, Robert O., II↗