Search NASA⌕ Search

SEARCH · Search NASA

Results for “PARALLEL PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Data-Analysis System for Entry, Descent, and Landing

A report describes the Entry Descent Landing Data Analysis (EDA), which is a system of signal-processing software and computer hardware for acquiring status data conveyed by multiple-frequency-shift-keying tone signals transmitted by a spacecraft during descent to the surface of a remote planet. The design of the EDA meets the challenge of processing weak, fluctuating signals that are Doppler-shifted by amounts that are only partly predictable. The software supports both real-time and post processing. The software performs fast-Fourier-transform integration, parallel frequency tracking with prediction, and mapping of detected tones to specific events. The use of backtrack and refinement parallel-processing threads helps to minimize data gaps. The design affords flexibility to enable division of a descent track into segments, within each of which the EDA is configured optimally for processing in the face of signal conditions and uncertainties. A dynamic-lock-state feature enables the detection of signals using minimum required computing power less when signals are steadily detected, more when signals fluctuate. At present, the hardware comprises eight dual-processor personal-computer modules and a server. The hardware is modular, making it possible to increase computing power by adding computers.

Pham, Timothy↗

Microstructural characterization and comparison of Ti-6Al-4V manufactured with different additive manufacturing processes

In this work, the microstructures of Ti-6Al-4V manufactured by different additive manufacturing (AM) processes have been characterized and compared. The microstructural features that were characterized are the α lath thickness, grain boundary α (GB-α) thickness, prior β grain size and α colony size. In addition, the microhardnesses were also measured and compared. The microstructure of shaped metal deposited (SMD) Ti-6Al-4V material showed the smallest variations in α lath size, whereas the material manufactured with laser metal wire deposition-0 (LMwD-0) showed the largest variation. The prior β grain size was found to be smaller in material manufactured with powder bed fusion (PBF) as compared with corresponding material manufactured with the directed energy deposition (DED) processes. Parallel bands were only observed in materials manufactured with DED processes while being non-present in material manufactured with PBF processes.

36 MATERIALS SCIENCE↗

Real time software tools and methodologies

Real time systems are characterized by high speed processing and throughput as well as asynchronous event processing requirements. These requirements give rise to particular implementations of parallel or pipeline multitasking structures, of intertask or interprocess communications mechanisms, and finally of message (buffer) routing or switching mechanisms. These mechanisms or structures, along with the data structue, describe the essential character of the system. These common structural elements and mechanisms are identified, their implementation in the form of routines, tasks or macros - in other words, tools are formalized. The tools developed support or make available the following: reentrant task creation, generalized message routing techniques, generalized task structures/task families, standardized intertask communications mechanisms, and pipeline and parallel processing architectures in a multitasking environment. Tools development raise some interesting prospects in the areas of software instrumentation and software portability. These issues are discussed following the description of the tools themselves.

Christofferson, M. J.↗

Particle simulation of plasmas on the massively parallel processor

Particle simulations, in which collective phenomena in plasmas are studied by following the self consistent motions of many discrete particles, involve several highly repetitive sets of calculations that are readily adaptable to SIMD parallel processing. A fully electromagnetic, relativistic plasma simulation for the massively parallel processor is described. The particle motions are followed in 2 1/2 dimensions on a 128 x 128 grid, with periodic boundary conditions. The two dimensional simulation space is mapped directly onto the processor network; a Fast Fourier Transform is used to solve the field equations. Particle data are stored according to an Eulerian scheme, i.e., the information associated with each particle is moved from one local memory to another as the particle moves across the spatial grid. The method is applied to the study of the nonlinear development of the whistler instability in a magnetospheric plasma model, with an anisotropic electron temperature. The wave distribution function is included as a new diagnostic to allow simulation results to be compared with satellite observations.

Gledhill, I. M. A.↗

Data Science and the Knowledge Discovery Adventure

This talk will cover the important steps involved in the data science and knowledge discovery process: • Initial fact gathering (interview domain experts, review reports, articles, state-of-the-art) • Identify the problem (prediction, classification, statistical analysis, etc.) • Survey supporting data sources • Understand the data (numerical, categorical, text, sampling rate, data quality issues, etc.) • Selecting relevant features and sources • Acquire the data (set up agreements with the data stewards, APIs to download, etc.) • Merge data sources (temporal, spatial, common key, other ontologies...) • Feature Engineering (non linear domain knowledge or physics-based relationships) • Build data processing pipeline (may need to tap into data stream, develop parallel processing algorithm, federated learning etc.) • Build model and test (tune hyper-parameters, cross validation.) • Analyze/Validate results (do the results make sense. Does it answer the original question). • Deploy/Publish (Monitor and assess benefits)

Data science↗

Balancing computation and communication power in power constrained clusters

Systems, apparatuses, and methods for balancing computation and communication power in power constrained environments. A data processing cluster with a plurality of compute nodes may perform parallel processing of a workload in a power constrained environment. Nodes that finish tasks early may be power-gated based on one or more conditions. In some scenarios, a node may predict a wait duration and go into a reduced power consumption state if the wait duration is predicted to be greater than a threshold. The power saved by power-gating one or more nodes may be reassigned for use by other nodes. A cluster agent may be configured to reassign the unused power to the active nodes to expedite workload processing.

24 POWER TRANSMISSION AND DISTRIBUTION↗

HEP Software Foundation Community White Paper Working Group - Data Processing Frameworks

Data processing frameworks are an essential part of HEP experiments' software stacks. Frameworks provide a means by which code developers can undertake the essential tasks of physics data processing, accessing relevant inputs and storing their outputs, in a coherent way without needing to know the details of other domains. Frameworks provide essential core services for developers and help deliver a configurable working application to the experiments' production systems. Modern HEP processing frameworks are in the process of adapting to a new computing landscape dominated by parallel processing and heterogeneity, which pose many questions regarding enhanced functionality and scaling that must be faced without compromising the maintainability of the code. In this paper we identify a program of work that can help further clarify the key concepts of frameworks for HEP and then spawn R&D activities that can focus the community's efforts in the most efficient manner to address the challenges of the upcoming experimental program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Dark Energy Survey Data Management System: The Processing Framework

The Dark Energy Survey Data Management (DESDM) system will process and archive the data from the Dark Energy Survey (DES) over the five year period of operation. This paper focuses on a new adaptable processing framework developed to perform highly automated, high performance data parallel processing. The new processing framework has been used to process 45 nights of simulated DECam supernova imaging data, and was extensively used in the DES Data Challenge 4, where it was used to process thousands of square degrees of simulated DES data.

Gower, Michelle↗

Performance for GPU exceptions

Techniques for improving performance of accelerated processing devices (“APDs”) when exceptions occur are provided. In APDs, the very large number of parallel processing execution units, and the complexity of the hardware used to execute a large number of work-items in parallel, means that APDs typically stall when an exception occurs (unlike in central processing units (“CPUs”), which are able to execute speculatively and out-of-order). However, the techniques provided herein allow at least some execution to occur past exceptions. Execution past an exception generating instruction occurs by executing instructions that would not lead to a corruption while skipping those that would lead to a corruption. After the exception has been satisfied, execution occurs in a replay mode in which the potentially exception-generating instruction is executed and in which instructions that did not execute in the exception-wait mode are executed. A mask and counter are used to control execution in replay mode.

Gutierrez, Anthony T.↗

Increasing processor utilization during parallel computation rundown

Some parallel processing environments provide for asynchronous execution and completion of general purpose parallel computations from a single computational phase. When all the computations from such a phase are complete, a new parallel computational phase is begun. Depending upon the granularity of the parallel computations to be performed, there may be a shortage of available work as a particular computational phase draws to a close (computational rundown). This can result in the waste of computing resources and the delay of the overall problem. In many practical instances, strict sequential ordering of phases of parallel computation is not totally required. In such cases, the beginning of one phase can be correctly computed before the end of a previous phase is completed. This allows additional work to be generated somewhat earlier to keep computing resources busy during each computational rundown. The conditions under which this can occur are identified and the frequency of occurrence of such overlapping in an actual parallel Navier-Stokes code is reported. A language construct is suggested and possible control strategies for the management of such computational phase overlapping are discussed.

Jones, W. H.↗

Increasing processor utilization during parallel computation rundown

Some parallel processing environments provide for asynchronous execution and completion of general purpose parallel computations from a single computational phase. When all the computations from such a phase are complete, a new parallel computational phase is begun. Depending upon the granularity of the parallel computations to be performed, there may be a shortage of available work as a particular computational phase draws to a close (computational rundown). This can result in the waste of computing resources and the delay of the overall problem. In many practical instances, strict sequential ordering of phases of parallel computation is not totally required. In such cases, the beginning of one phase can be correctly computed before the end of a previous phase is completed. This allows additional work to be generated somewhat earlier to keep computing resources busy during each computational rundown. The conditions under which this can occur are identified and the frequency of occurrence of such overlapping in an actual parallel Navier-Stokes code is reported. A language construct is suggested and possible control strategies for the management of such computational phase overlapping are discsused.

Jones, William H.↗

Computational methods and software systems for dynamics and control of large space structures

Two key areas of crucial importance to the computer-based simulation of large space structures are discussed. The first area involves multibody dynamics (MBD) of flexible space structures, with applications directed to deployment, construction, and maneuvering. The second area deals with advanced software systems, with emphasis on parallel processing. The latest research thrust in the second area involves massively parallel computers.

Park, K. C.↗

Stroop-Like Effects for Monkeys and Humans: Processing Speed or Strength of Association?

Stroop-like effects have been found using a variety of paradigms and subject groups. In the present investigation, 6 rhesus monkeys (Macaca mulatta) and 28 humans exhibited Stroop-like interference and facilitation in a relative-numerousness task. Monkeys, like humans, processed the meanings of the numerical symbols automatically, despite the fact that these meanings were irrelevant to task performance. These data also afforded direct comparison of interpretations of the Stroop effect in terms of processing speed versus association strength. These findings were consistent with parallel-processing models of Stroop-like interference proposed elsewhere, but not with processing-speed accounts posited frequently to explain the effect.

Washburn, David A.↗

UCLA parallel PIC framework

The UCLA Parallel PIC Framework (UPIC) has been developed to provide trusted components for the rapid construction of new, parallel Particle-in-Cell (PIC) codes. The Framework uses object-based ideas in Fortran95, and is designed to provide support for various kinds of PIC codes on various kinds of hardware. The focus is on student programmers. The Framework supports multiple numerical methods, different physics approximations, different numerical optimizations and implementations for different hardware. It is designed with "defensive" programming in mind, meaning that it contains many error checks and debugging helps. Above all, it is designed to hide the complexity of parallel processing. It is currently being used in a number of new Parallel PIC codes.

Norton, Charles D.↗

Conception and Operation of a New Treatment Center for Radioactive Waste from High Energy Accelerators - 18293

CERN has operated high-energy accelerators for more than 60 years of research in fundamental physics. The side-product of this activity is the generation of low- and intermediate-level radioactive waste, most of which is in solid form and free of surface contamination. Today, one operational year produces about 400 tons of radioactive waste which need to be disposed of towards the final repositories of the two CERN Host States, France and Switzerland. A new facility for the collection, interim storage, characterization and treatment of radioactive waste became operational at CERN in 2015. This facility was specifically conceived for an accelerator complex with a wide range of challenging waste items, which are often unique in their irradiation history as well as in their physical, chemical and radiological characteristics. The disposal rate was ramped up in 2016 with a unique treatment process tailored for metallic low-level waste. In 2017, two parallel processes were successfully tested for the elimination of radioactive cables and for the recycling of valuable metals. This paper gives an overview of the challenges in the design, commissioning and operation of the CERN radioactive waste treatment center. It outlines the methodology followed for the conception of the elimination processes, which can be of guidance for the development of similar facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Performance Evaluation of Different Parallel Programming Models in SCALE-Shift Sequences for Criticality and Shielding Applications [Abstract]

The SCALE code system has been widely used for nuclear criticality safety, reactor physics, radiation shielding, source term generation, and inventory analyses by researchers, industry, and regulatory bodies. Although limited support for shared- and distributed-memory parallel processing was introduced via C++ threading, OpenMP, and MPI, a hybrid parallel programming model with both distributed- and shared-memory parallelism has not been fully supported in the SCALE code system.

Nuclear Criticality Safety Program (NCSP)↗

Traveler: Navigating Task Parallel Traces for Performance Analysis

Understanding the behavior of software in execution is a key step in identifying and fixing performance issues. This is especially important in high performance computing contexts where even minor performance tweaks can translate into large savings in terms of computational resource use. To aid performance analysis, developers may collect an execution trace —a chronological log of program activity during execution. As traces represent the full history, developers can discover a wide array of possibly previously unknown performance issues, making them an important artifact for exploratory performance analysis. However, interactive trace visualization is difficult due to issues of data size and complexity of meaning. Traces represent nanosecond-level events across many parallel processes, meaning the collected data is often large and difficult to explore. The rise of asynchronous task parallel programming paradigms complicates the relation between events and their probable cause. Here, to address these challenges, we conduct a continuing design study in collaboration with high performance computing researchers. We develop diverse and hierarchical ways to navigate and represent execution trace data in support of their trace analysis tasks. Through an iterative design process, we developed Traveler , an integrated visualization platform for task parallel traces. Traveler provides multiple linked interfaces to help navigate trace data from multiple contexts. We evaluate the utility of Traveler through feedback from users and a case study, finding that integrating multiple modes of navigation in our design supported performance analysis tasks and led to the discovery of previously unknown behavior in a distributed array library.

97 MATHEMATICS AND COMPUTING↗

A parallel expert system for the control of a robotic air vehicle

Expert systems can be used to govern the intelligent control of vehicles, for example the Robotic Air Vehicle (RAV). Due to the nature of the RAV system the associated expert system needs to perform in a demanding real-time environment. The use of a parallel processing capability to support the associated expert system's computational requirement is critical in this application. Thus, algorithms for parallel real-time expert systems must be designed, analyzed, and synthesized. The design process incorporates a consideration of the rule-set/face-set size along with representation issues. These issues are looked at in reference to information movement and various inference mechanisms. Also examined is the process involved with transporting the RAV expert system functions from the TI Explorer, where they are implemented in the Automated Reasoning Tool (ART), to the iPSC Hypercube, where the system is synthesized using Concurrent Common LISP (CCLISP). The transformation process for the ART to CCLISP conversion is described. The performance characteristics of the parallel implementation of these expert systems on the iPSC Hypercube are compared to the TI Explorer implementation.

Shakley, Donald↗