Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOELECTRIC EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Electric-Field Behavior of the Resonance Features of the Tunneling Photocurrent Component in InAs(QD)/GaAs Heterostructures

The electric-field behavior of resonance features of the photoelectric characteristics of InAs/GaAs heterostructures is investigated. The emission of carriers excited by light from InAs quantum dots into the GaAs matrix is ​​discussed. It is shown that at the temperature of liquid nitrogen the photocurrent in a strong transverse electric field is only determined by the effect of electron tunneling through a barrier formed at the quantum-dot interfaces. Comparison of the experimental curves with the results obtained using a quasiclassical expression for the tunneling-current component and subsequent analysis of the potential structure made it possible to refine the parameters of the heterostructure under study. The contribution of the resonance component caused by possible electron tunneling through the barrier with the participation of the local defect states to the total tunneling current is analyzed. The influence of the level of excitation of the system on the photocurrent flowing through the InAs/GaAs heterojunction is theoretically studied.

36 MATERIALS SCIENCE↗

Enhancement of Photoemission on p-Type GaAs Using Surface Acoustic Waves

We demonstrate that photoemission properties of p-type GaAs can be altered by surface acoustic waves (SAWs) generated on the GaAs surface due to dynamical piezoelectric fields of SAWs. Multiphysics simulations indicate that charge-carrier recombination is greatly reduced, and electron effective lifetime in p-doped GaAs may increase by a factor of 10× to 20×. It implies a significant increase, by a factor of 2× to 3×, of quantum efficiency (QE) for GaAs photoemission applications, like GaAs photocathodes. Conditions of different SAW wavelengths, swept SAW intensities, and varied incident photon energies were investigated. Essential steps in SAW device fabrication on a GaAs substrate are demonstrated, including deposition of an additional layer of ZnO for piezoelectric effect enhancement, measurements of current–voltage (I–V) characteristics of the SAW device, and ability to survive high-temperature annealing. Results obtained and reported in this study provide the potential and basis for future studies on building SAW-enhanced photocathodes, as well as other GaAs photoelectric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing photovoltaic performance of dye-sensitized solar cells by rare-earth doped oxide of SrAl{sub 2}O{sub 4}:Eu{sup 3+}

Graphical abstract: Current–voltage characteristics of DSSCs based on the photoanodes doping different SrAl{sub 2}O{sub 4}:Eu{sup 3+} and doping 3% SrAl{sub 2}O{sub 4}. - Highlights: • A down-conversion (DC) nanocrystal (SrAl{sub 2}O{sub 4}:Eu{sup 3+}) was synthesized. • The effect of SrAl{sub 2}O{sub 4}:Eu{sup 3+} doped in photoanode in DSSCs was investigated. • SrAl{sub 2}O{sub 4}:Eu{sup 3+} doped in photoanode appeared the better photovoltaic performances. • The dual function of DC and p-type doping effect were explained. - Abstract: SrAl{sub 2}O{sub 4}:Eu{sup 3+} down-conversion (DC) nanocrystals were synthesized by a sol–gel method and then doped in TiO{sub 2} as a photoanode in dye-sensitized solar cells (DSSCs). Differential thermal analysis, fourier transform infrared spectroscopy, X-ray diffraction and Brunauer–Emmet–Teller analysis confirmed the formation of SrAl{sub 2}O{sub 4}:Eu{sup 3+} nanocrystals with diameters of ∼47 nm, pore size of ∼25 nm, sintering temperature of 1300 °C. The photoluminescence and UV–vis absorption spectra of the SrAl{sub 2}O{sub 4}:Eu{sup 3+} revealed a DC from ultraviolet light to visible light which matched the strong absorbing region of the N719 dye. The photoelectric conversion efficiency of the DSSCs with a TiO{sub 2} photoanode doped with 3 wt% SrAl{sub 2}O{sub 4}:Eu{sup 3+} was 20% higher than that with a pure TiO{sub 2} photoanode. This phenomenon could be mainly explained by SrAl{sub 2}O{sub 4}:Eu{sup 3+} nanocrystals’ ability of DC and increased the short-circuit current density. It could be minorly due to the p-type doping effect and slightly improved the open-circuit voltage.

36 MATERIALS SCIENCE↗

L-shell X-ray opacity of many-electron atoms

The study presents a formulation for obtaining the L-shell photoelectric cross section (sigma sub L) for many-electron atomic systems. A scaling law is suggested for the evaluation of the contribution to sigma sub L from 2s and 2p ejection from a general system in any ionization state. The formula is expressed in terms of the effective nuclear charge (Z sub 2s and Z sub 2p) seen by the corresponding bound electrons, with Z sub 2s and Z sub 2p, obtained from improved screening constants derived in a recent investigation. A comparison is made of Hartree-Fock and hydrogenic expressions for sigma sub L with experimental results for atomic neon at X-ray photon energies, providing the basis for the scaling law and an approximate energy dependence for the cross sections. The special case of sigma sub L for atomic Fe is considered in detail. This L edge has structure because of the different threshold for 2s and 2p photoejection; the latter has fine structure.

Jung, Young-Dae↗

X-Ray Spectro-Polarimetry with Photoelectric Polarimeters

We derive a generalization of forward fitting for X-ray spectroscopy to include linear polarization of X-ray sources, appropriate for the anticipated next generation of space-based photoelectric polarimeters. We show that the inclusion of polarization sensitivity requires joint fitting to three observed spectra, one for each of the Stokes parameters, I(E), U(E), and Q(E). The equations for StokesI (E) (the total intensity spectrum) are identical to the familiar case with no polarization sensitivity, and for which the model-predicted spectrum is obtained by a convolution of the source spectrum, F (E), with the familiar energy response function,(E) R(E,E), where (E) and R(E,E) are the effective area and energy redistribution matrix, respectively. In addition to the energy spectrum, the two new relations for U(E) and Q(E) include the source polarization fraction and position angle versus energy, a(E), and 0(E), respectively, and the model-predicted spectra for these relations are obtained by a convolution with the modulated energy response function, (E)(E) R(E,E), where(E) is the energy-dependent modulation fraction that quantifies a polarimeters angular response to 100 polarized radiation. We present results of simulations with response parameters appropriate for the proposed PRAXyS Small Explorer observatory to illustrate the procedures and methods, and we discuss some aspects of photoelectric polarimeters with relevance to understanding their calibration and operation.

polarization↗

Lunar Dust Charging by Secondary Electron Emission and its Complex Role in the Lunar Environment

The lunar surface is covered with a thick layer of micron/sub-micron size dust grains formed by billions of years of meteoritic impact. With virtually no atmosphere and exposed to the solar wind plasma and solar electromagnetic radiation, the lunar surface and the dust grains are electrostatically charged. The dominant charging processes include: photoelectric emissions (UV, X-rays), impact of solar wind electrons and ions, and secondary electron emissions (SEE) induced by energetic solar wind electrons. During the Apollo missions, the astronauts found the lunar dust to be extraordinarily high in its adhesive characteristics, sticking to the suits and the mechanical equipment. Electrostatically charged lunar dust is believed to be transported over long distances by the induced electric fields, as indicated by the observed dust streamers and the horizon glow [e.g., 1-3]. The hazardous effects of dust in the lunar environment are recognized to be one of the major issues that must be addressed in planning the forthcoming missions for robotic and human exploration of the Moon. Theoretical studies are being performed along with the development of analytical models and a variety of experimental investigations, to better understand the lunar dust phenomena. [e.g., 4-6]. The lunar dust is believed to be charged negatively on the lunar night-side by interaction With solar wind electrons. However, rigorous theoretical expressions for calculation of SEE yields and the sticking efficiencies of individual micron size dust grains are not yet available, and the information has to be obtained by experiment. On theoretical considerations, however, it is well recognized that SEE yields, similar to the photoelectric yields for small-size grains, would be totally different from the corresponding bulk values [e.g., 7-9]. Some theoretical models for charging of individual small spherical particles have been developed [e.g., 10], and some limited measurements on individual metallic dust grains at keV electron energies have been made [e.g., i 1]. In this paper, we present the first measurements of the secondary electron emission yields of individual micron/sub-micron size dust grains selected from sample returns of Apollo 11 and Apollo 17 missions.

Abbas, M. M.↗

Local microwave sensing of excitons and their electrical environment

Excitons in atomically thin transition metal dichalcogenides (TMDs) possess intriguing optical properties, drawing interest for both technology and fundamental research. However, as the demands for nanodevice applications and the exploration of fundamental physics push toward smaller, subwavelength scales, studying them locally is challenging. In this work, we introduce a cryogenic scanning probe photoelectrical sensing technique, termed exciton-resonant microwave impedance microscopy (ER-MIM), to measure the excitonic responses in a monolayer MoSe 2 device at 1.5K. From the microwave signal changes, we identify exciton polarons and their Rydberg states. Building on these observations, we systemically reveal the local and nonlocal effects of carrier density, inhomogeneous electric fields, as well as dielectric screening on excitons, beyond the reach of conventional probes. By further integrating deep learning techniques, we precisely extracted the electrical parameters surrounding excitons, demonstrating a quantified, exciton-assisted nanoscale electrometry. Our results provide new insight into exciton-environment interactions, establish ER-MIM as a powerful optoelectronic sensing platform, and open avenues for exciton-based quantum control and device technologies.

scanning probe microscopy↗

Parallelism maps for optically contacted etalons

A measurement technique is described that is capable of producing accurate numerical maps of the parallelism defect of optically contacted Fabry-Perot etalons. A photoelectric raster scan of the etalon transmission intensity distribution is performed at each of three closely spaced etalon tunings, one at maximum on-axis and two at the half-maxima on-axis positions. Simple data manipulation gives numerical or contour maps of the parallelism defect. Results demonstrating the effect of mechanical constraints on etalon parallelism are presented

Killeen, T. L.↗

X-Ray Spectro-polarimetry with Photoelectric Polarimeters

We derive a generalization of forward fitting for X-ray spectroscopy to include linear polarization of X-ray sources, appropriate for the anticipated next generation of space-based photoelectric polarimeters. We show that the inclusion of polarization sensitivity requires joint fitting to three observed spectra, one for each of the Stokes parameters, I(E), U(E), and Q(E). The equations for Stokes’ I(E) (the total intensity spectrum) are identical to the familiar case with no polarization sensitivity, and for which the model-predicted spectrum is obtained by a convolution of the source spectrum, F(E′), with the familiar energy response function, ϵ(E′) R(E′, E), where ϵ(E′) and R(E′, E) are the effective area and energy redistribution matrix, respectively. In addition to the energy spectrum, the two new relations for U(E) and Q(E) include the source polarization fraction and position angle versus energy, a(E′), and ψ{sub 0}{sup ′}(E{sup ′}), respectively, and the model-predicted spectra for these relations are obtained by a convolution with the “modulated” energy response function, μ(E′) ϵ (E′)R(E, E′), where μ(E′) is the energy-dependent modulation fraction that quantifies a polarimeter’s angular response to 100% polarized radiation. We present results of simulations with response parameters appropriate for the proposed PRAXyS Small Explorer observatory to illustrate the procedures and methods, and we discuss some aspects of photoelectric polarimeters with relevance to understanding their calibration and operation.

79 ASTRONOMY AND ASTROPHYSICS↗

Hierarchically macro–mesoporous TiO{sub 2} film via self-assembled strategy for enhanced efficiency of dye sensitized solar cells

Highlights: • A new hierarchically macro–mesoporous TiO{sub 2} film is fabricated via TiF{sub 4} hydrolysis. • TiF{sub 4} hydrolysis is accompanied with self-assembled process of TiO{sub 2} nanoparticles. • The hierarchically porous TiO{sub 2} films show higher performance than nonporous film. - Abstract: The hierarchically porous structure of TiO{sub 2} film plays an important role on improved photoelectric conversion efficiency in dye-sensitized solar cells (DSSCs). It is highly required to develop a facile strategy to prepare the hierarchical porous photoelectrode. In this study, a novel hierarchically macro–mesoporous TiO{sub 2} film as photoelectrode of DSSCs is fabricated by a self-assembled process of TiO{sub 2} nanoparticles via TiF{sub 4} hydrolysis. The hydrolysis of TiF{sub 4} is accompanied with self-assembled process of TiO{sub 2} nanoparticles on the surface of electrophoretic-deposited titanate nanotube film which provides effective active sites for the deposition of TiO{sub 2} nanoparticles owing to a large amount of hydroxyl groups, resulting in the formation of hierarchically porous structures. The hierarchically porous TiO{sub 2} film is mainly composed of mesopores with a size of 2–50 nm and macropores with a wide range of 0.5–5 μm, which contribute to an obviously higher conversion performance (6.70%) than nonporous P25-TiO{sub 2} film (4.01%). The main reasons for enhanced conversion efficiency of hierarchically porous TiO{sub 2} film can be attributed to adsorption of more dye molecules, rapid diffusion and efficient transport of electrolyte, and longer electron lifetime. This work may provide new insights into preparing porous structure of TiO{sub 2} films in DSSCs for modification of photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

Precise measurement of asteroid sizes and shapes from occultations

The observational techniques (including photoelectric observations, television recordings, and visual timings) used to measure asteroid dimensions from occultations of stars by asteroids are discussed together with the methods of analysis appropriate to occultation data. Results are presented on the determinations of asteroid diameter, density, and internal structure measures learned from occultations of 36 asteroids. Prospects for continued effective applications of the occultation technique to asteroid studies are discussed.

Millis, R. L.↗

Enhancement of photoelectric catalytic activity of TiO{sub 2} film via Polyaniline hybridization

A Polyaniline (PANI)/TiO{sub 2} film coated on titanium foil was successfully prepared using the sol-gel method followed by a facile chemisorption. Compared with pristine TiO{sub 2}, the photocatalytic (PC) and photoelectrocatalytic (PEC) degradation rates of 2,4-dichlorophenol (2,4-DCP) with the PANI/TiO{sub 2} film were enhanced by 22.2% and 57.5%, respectively. 2,4-DCP can be mineralized more effectively in the presence of PANI/TiO{sub 2} film. The best PEC degradation efficiency of 2,4-DCP with the PANI/TiO{sub 2} film was acquired at an external potential of 1.5 V with a layer of 1 nm thick PANI. The PANI/TiO{sub 2} film was characterized by Raman spectra, Fourier transform infrared spectra (FT-IR), Auger electron spectroscopy (AES), and electrochemical analysis. These results indicated that there was a chemical interaction on the interface of PANI and TiO{sub 2}. This interaction may be of significance to promote the migration efficiency of carriers and induce a synergetic effect to enhance the PC and PEC activities. - Graphical abstract: The effect of PANI content on 2,4-DCP degradation with initial concentration of 50 mg/L, external potential=1.5 V. Inset: degradation rate constants of various PANI/TiO{sub 2} films. Highlights: > Polyaniline/TiO{sub 2} film was prepared using the sol-gel method followed by chemisorption. > Photoelectrocatalytic degradation rate of 2,4-dichlorophenol was enhanced by 57.5%. > The modification of Polyaniline to TiO{sub 2} film caused a rapid charge separation. > Best degradation efficiency was acquired at 1.5 V with 1 nm thick PANI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent developments in density, temperature and momentum fluctuation measurement

Attention is drawn to recent advancements in the fluctuating line-reversal temperature measurement, the development of the two-dimensional drag-sensing probe into a three-dimensional drag-sensing probe, and the fluctuating density gradient cross beam Schlieren technique. An experimental apparatus is explained whereby the temperature fluctuation in a pulsating air-fuel ratio Bunsen burner is measured by means of sodium D-line reversal methods with a new photoelectric circuit to obtain both fluctuating and mean temperature data. The three-D drag probe is made possible by a newly invented differential and total magnetic sensing system that separates signals due to three orthogonal movements so that the vectorial momentum fluctuation can be measured. In the case of the Schlieren technique, the effect of anisotropic density gradients with respect to the angle between the polarization plane and the knife edge of a laser Schlieren system is studied.

Battle, T. M.↗

Analysis of Mount St. Helens ash from optical photoelectric photometry

The optical properties of suspended dust particles from the eruption of Mt. St. Helens on July 23, 1980 are investigated using photoelectric observations of standard stars obtained on the 0.76-m telescope at the University of Washington 48 hours after the eruption. Measurements were made with five broad-band filters centered at 3910, 5085, 5480, 6330, and 8050 A on stars of varying color and over a wide range of air masses. Anomalous extinction effects due to the volcanic ash were detected, and a significant change in the wavelength-dependent extinction parameter during the course of the observations was established by statistical analysis. Mean particle size (a) and column density (N) are estimated using the Mie theory, assuming a log-normal particle-size distribution: a = 0.18 micron throughout; N = 1.02 x 10 to the 9th/sq cm before 7:00 UT and 2.33 x 10 to the 9th/sq cm after 8:30 UT on July 25, 1980. The extinction is attributed to low-level, slowly migrating ash, possibly combined with products of gas-to-particle conversion and coagulation.

Cardelli, J. A.↗

Uranus - Disk structure within the 7300-A methane band

Orthogonal narrow-band (100 A) photoelectric slit scan photometry of Uranus has been used to infer the basic two-dimensional structure of the disk within the 7300-A methane band. Numerical image reconstruction and restoration techniques have been applied to quantitatively estimate the degrees of polar and limb brightening on the planet. Through partial removal of atmospheric smearing, an effective spatial resolution of approximately 0.9 arcsec has been achieved. Peak polar, limb, and central intensities on the disk are in the respective proportions 3:2:1. In addition, the bright polar feature is displaced from the geometric pole towards the equator of the planet.

Price, M. J.↗

Crystallization-induced emission enhancement of alkyl chain-dependent pyrene-based luminogens: Visual detection of nitro-explosives

In view of the widespread applications and urgent need for efficient blue emitting materials, the synthesis of such materials has seen renewed interest. In the present work, three alkyl chain-dependent blue emitting pyrene-based luminogens were synthesized and characterized. Here, the experimental results show that these luminogens exhibited high photoluminescence efficiency both in solution (>86%) and in the solid state (>35%). Interestingly, 1,3,6,8-tetrakis (pentylphenyl)pyrene (TPPy), as a photoelectric functional material, was endowed with higher quantum yield (72%) and competitiveness due to a remarkable crystallization-induced emission enhancement (CIEE) property. More importantly, TPPy exhibits high sensitivity and selectivity for ortho-nitroaniline (o-NA) with low limit of detection (9.99 × 10 -8 M), which is mainly due to the distinctive odd-even effects of the terminal alkyl chain. The results demonstrate that this type of luminogen can potentially be utilized for practical applications in the field of contaminant or explosive detection as a sensitive and portable fluorimeter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Si:As BIBIB (Back-Illuminated Blocked-Impurity-Band) hybrid arrays

Results of a program to increase the short wavelength (less than 10 microns) detective quantum efficiency, eta/beta, of Si:As Impurity Band Conduction arrays are presented. The arrays are epitaxially grown Back-Illuminated Blocked (BIB) Impurity-Band (BIBIB) 10x50 detectors bonded to switched-FET multiplexers. It is shown that the 4.7 microns detective quantum efficiency increases proportionately with the thickness of the infrared active layer. A BIB array with a thick active layer, designed for low dark current, exhibits eta/beta = 7 to 9 percent at 4.7 microns for applied bias voltages between 3 and 5 V. The product of quantum efficiency and photoelectric gain, etaG, increases from 0.3 to 2.5 as the voltage increases from 3 to 5 V. Over this voltage range, the dark current increases from 8 to 120 e(-)s(-1) at a device temperature of 4.2 K and is under 70 e(-)s(-1) for all voltages at 2 K. Because of device gain, the effective dark current (equivalent photon rate) is less than 3 e(-)s(-1) under all operating conditions. The effective read noise (equivalent photon noise) is found to be less than 12 electrons under all operating conditions and for integration times between 0.05 and 100 seconds.

Herter, T.↗

A Benign, Low Z Electron Capture Agent for Negative Ion TPCs

We have identified nitromethane (CH3NO2) as an effective electron capture agent for negative ion TPCs (NITPCs). We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent. Not only is nitromethane substantially more benign than the only other identified capture agent, CS2, but its low atomic number will enable the use of the NITPC as a photoelectric X-ray polarimeter in the 1-10 keV band.

Martoff, C. J.↗