Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHYSICAL FITNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Trajectory reconstruction and aerodynamic results from the first Discovery flight, STS-14(41-D)

Trajectory reconstruction results for the first Discovery flight are presented. Spacecraft dynamic measurements from IMU2 were utilized in conjunction with the ground based tracking data from two S-band stations, eight C-band, and five cameras at Edwards Air Force Base to determine the spacecraft trajectory from epoch through roll-out on Runway 17. Specifics as to the trajectory reconstruction are discussed in Section 1. The final inertial profile is BT14NO2/UN=169750N. Merging of this file with the final LAIRS atmosphere is discussed in Section 2. The final Extended BET is ST14BET/UN=274885C. Section 3 presents plots of relevant parameters from the AEROBET as well as aerodynamic performance comparison results. High frequency files for maneuver extraction were also generated as discussed in Section 4. Appendices are attached which contain: (1) spacecraft and physical parameters utilized, (2) final residuals obtained from the data fitting process, (3) listing of trajectory parameters, and (4) archival information.

Kelly, G. M.↗
NASA NTRS1990

Confinement of radio galaxies in rich clusters

X-ray observations obtained with the Einstein Observatory are presented for the Abell clusters A 98, A 160, A 278, and A 569, which are characterized by the presence of an extended radio source associated with the brightest cluster galaxy. The X-ray brightness profiles are fitted with a hydrostatic-thermal model to determine the physical parameters of the X-ray emitting gas and the behavior of the thermal pressure in each cluster. The gas thermal pressure is then compared with the nonthermal pressure within the radio sources, and the conditions for pressure balance are analyzed. The radio source components show a minimum pressure lower than the pressure of the ambient gas. Balance between internal and external pressure is obtained in the case that the usual assumptions for the computation of the energy density in the radio source components are not valid (Phi less than 1, k greater than 1) or that physical conditions are out of equipartition.

Feretti, L.↗
NASA NTRS1991

Reconstructing the primordial spectrum of fluctuations of the universe from the observed nonlinear clustering of galaxies

It was discovered that the nonlinear evolution of the two point correlation function in N-body experiments of galaxy clustering with Omega = 1 appears to be described to good approximation by a simple general formula. The underlying form of the formula is physically motivated, but its detailed representation is obtained empirically by fitting to N-body experiments. In this paper, the formula is presented along with an inverse formula which converts a final, nonlinear correlation function into the initial linear correlation function. The inverse formula is applied to observational data from the CfA, IRAs, and APM galaxy surveys, and the initial spectrum of fluctuations of the universe, if Omega = 1.

Hamilton, A. J. S.↗
NASA NTRS1993

Consistency of spherical, gravity-dominated dynamics with quasar high-ionization emission-line profiles

Line profile data are used to test a simple kinematic model - spherically symmetric gravitational free fall - in which the number of free parameters is limited by requiring physical self-consistency. The predictions of this model are fitted to high-resolution spectra of the stronger rest-frame UV emission lines in 12 quasars with z of about 2. It is found that if all the lines are radiated predominantly from the illuminated faces of the emission-line clouds, the profiles of Ly-alpha, N V 1240 A, and C IV 1549 A can be simultaneously well fitted with very similar parameters for all 12 quasars. It is concluded that spherically symmetric gravitational free fall does not correctly describe the dynamics of quasar broad emission-line regions.

Kallman, T. R.↗
NASA NTRS1994

ROSAT PSPC observations of two X-ray-faint early-type galaxies: NGC 4365 and NGC 4382

We present the results of ROSAT Positive Sensitive Proportional Counter (PSPC) observations of the two early-type galaxies NGC 4365 and NGC 4382. These galaxies are among those observed with Einstein to have the lowest X-ray to optical flux ratios of early-type galaxies. The PSCP data show that for radii r greater than 50 arcsec the radial distributions of the X-ray surface brightness are consistent with the optical distributions of King (1978). We also find that these galaxies have X-ray spectra significantly different from those observed in X-ray-bright ellipticals, with a relative excess of counts detected in the softest spectral channels. This confirms earlier Einstein results. The characteristics of the ROSAT PSPC do not allow us to discriminate between possible spectral models. If we adopt a two-component thermal model on the grounds of physical plausibility, we find that the spectral data can be fitted with a very soft optically thin component, with kT approximately 0.2 keV, and a hard component with kT greater than (1.0-1.5) keV. The hard component has a luminosity consistent with that expected from the integrated emission of a population of low mass-X-ray binaries in these galaxies; the nature of the very soft component is more speculative. Candidates include the coronal emission of late-type stars, supersoft X-ray sources, RS CVn, and perhaps a hot Interstellar Medium (ISM). Alternatively, the spectal data may be fitted with a 0.6-1 keV bremsstrahlung spectrum (expontential plus Gaunt), and may suggest the presence of a totally new population of X-ray sources.

Fabbiano, G.↗
NASA NTRS1997

The First Multiple Layer Doppler Imaging of an Active Binary

Preliminary results were presented at the Cool Stars, Stellar Systems, and the Sun in Cambridge, MA in July 1997. A copy of the two published papers (in press) is attached. The project has met or exceeded our expectations. The rapid readout data have given us an excellent data set to model in detail the flare behavior. The large number of spectral features observed between the EUVE and HST data have allowed us to compute a mean model atmosphere and compare the results to another well studied system (HR 1099 - Cycle 3 HST observation previously published). I developed a model (anisotropic macroturbulence) that fits the CIV and MgII better than previously achieved. These results have been constrained by the EUVE data. In early studies, 2 gaussians were applied to the profile. The interpretation of these features was unclear. The anisotropic macroturbulence model fits the data better than previously possible and gives a physically reasonable interpretation: there appears to be an asymmetrical distribution between the radial and tangential velocity fields. This is similar to case of the Sun.

Dempsey, Robert C.↗
NASA NTRS2011

Fermi/GBM Observations of SGRJ0501 + 4516 Bursts

We present our temporal and spectral analyses of 29 bursts from SGRJ0501+4516, detected with the Gamma-ray Burst Monitor onboard the Fermi Gamma-ray Space Telescope during the 13 days of the source activation in 2008 (August 22 to September 3). We find that the T(sub 90) durations of the bursts can be fit with a log-normal distribution with a mean value of approx. 123 ms. We also estimate for the first time event durations of Soft Gamma Repeater (SGR) bursts in photon space (i.e., using their deconvolved spectra) and find that these are very similar to the T(sub 90)s estimated in count space (following a log-normal distribution with a mean value of approx. 124 ms). We fit the time-integrated spectra for each burst and the time-resolved spectra of the five brightest bursts with several models. We find that a single power law with an exponential cutoff model fits all 29 bursts well, while 18 of the events can also be fit with two black body functions. We expand on the physical interpretation of these two models and we compare their parameters and discuss their evolution. We show that the time-integrated and time-resolved spectra reveal that E(sub peak) decreases with energy flux (and fluence) to a minimum of approx. 30 keV at F = 8.7 x 10(exp -6)erg/sq cm/s, increasing steadily afterwards. Two more sources exhibit a similar trend: SGRs J1550 - 5418 and 1806 - 20. The isotropic luminosity, L(sub iso), corresponding to these flux values is roughly similar for all sources (0.4 - l.5 x 10(exp 40) erg/s.

Lin, Lin↗
NASA NTRS2020

X-ray Spectra of the Fe-L Complex II: Atomic Data Constraints from the EBIT Experiment and X-Ray Grating Observations of Capella

The Hitomi results for the Perseus cluster have shown that accurate atomic models are essential to the success of X-ray spectroscopic missions and just as important as the store of knowledge on instrumental calibration and astrophysical modeling. Preparing the models requires a multifaceted approach, including theoretical calculations, laboratory measurements, and calibration using real observations. In a previous paper, we presented a calculation of the electron impact cross sections on the transitions forming the Fe-L complex. In the present work, we systematically tested the calculation against cross-sections of ions measured in an electron beam ion trap experiment. A two-dimensional analysis in the electron beam energies and X-ray photon energies was utilized to disentangle radiative channels following dielectronic recombination, direct electron-impact excitation, and resonant excitation processes in the experimental data. The data calibrated through laboratory measurements were further fed into a global modeling of the Chandra grating spectrum of Capella. We investigated and compared the fit quality, as well as the sensitivity of the derived physical parameters to the underlying atomic data and the astrophysical plasma modeling. We further list the potential areas of disagreement between the observations and the present calculations, which, in turn, calls for renewed efforts with regard to theoretical calculations and targeted laboratory measurements.

Liyi Gu↗
DOE OSTI2024

Deep energy-pressure regression for a thermodynamically consistent EOS model

Abstract In this paper, we aim to explore novel machine learning (ML) techniques to facilitate and accelerate the construction of universal equation-Of-State (EOS) models with a high accuracy while ensuring important thermodynamic consistency. When applying ML to fit a universal EOS model, there are two key requirements: (1) a high prediction accuracy to ensure precise estimation of relevant physics properties and (2) physical interpretability to support important physics-related downstream applications. We first identify a set of fundamental challenges from the accuracy perspective, including an extremely wide range of input/output space and highly sparse training data. We demonstrate that while a neural network (NN) model may fit the EOS data well, the black-box nature makes it difficult to provide physically interpretable results, leading to weak accountability of prediction results outside the training range and lack of guarantee to meet important thermodynamic consistency constraints. To this end, we propose a principled deep regression model that can be trained following a meta-learning style to predict the desired quantities with a high accuracy using scarce training data. We further introduce a uniquely designed kernel-based regularizer for accurate uncertainty quantification. An ensemble technique is leveraged to battle model overfitting with improved prediction stability. Auto-differentiation is conducted to verify that necessary thermodynamic consistency conditions are maintained. Our evaluation results show an excellent fit of the EOS table and the predicted values are ready to use for important physics-related tasks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Medium Energy Nuclear Physics Research at the University of Richmond

The first part is a technical paper on the fitting techniques used to extract the neutron detec tion efficiency from the CLAS12 detector at the Thomas Jefferson National Accelerator Facility in Newport News, VA. The second is the masters thesis of Mr. Jude Buckley who also studied the neutron detection efficiency. He was a student at the University of Surrey in the UK and supported by the grant.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2000

First-Order Model Management With Variable-Fidelity Physics Applied to Multi-Element Airfoil Optimization

First-order approximation and model management is a methodology for a systematic use of variable-fidelity models or approximations in optimization. The intent of model management is to attain convergence to high-fidelity solutions with minimal expense in high-fidelity computations. The savings in terms of computationally intensive evaluations depends on the ability of the available lower-fidelity model or a suite of models to predict the improvement trends for the high-fidelity problem, Variable-fidelity models can be represented by data-fitting approximations, variable-resolution models. variable-convergence models. or variable physical fidelity models. The present work considers the use of variable-fidelity physics models. We demonstrate the performance of model management on an aerodynamic optimization of a multi-element airfoil designed to operate in the transonic regime. Reynolds-averaged Navier-Stokes equations represent the high-fidelity model, while the Euler equations represent the low-fidelity model. An unstructured mesh-based analysis code FUN2D evaluates functions and sensitivity derivatives for both models. Model management for the present demonstration problem yields fivefold savings in terms of high-fidelity evaluations compared to optimization done with high-fidelity computations alone.

Alexandrov, N. M.↗
NASA NTRS2003

Cloud-Resolving Model and GPM

Over the past twenty years, rainfall retrieval algorithms have been developed to retrieve rainfall and vertical hydrometeor structures from passive microwave observations by making use of the fact that weighting functions for various frequencies peak at different levels within a rainy atmosphere. GPROF is one of two TMI rainfall algorithms. It is physically based retrieval that finds the vertical hydrometeor profile that best fits the brightness temperatures in the available passive radiometer channels. Matching is achieved using a library of hydrometeor profiles generated by cloud-resolving models (CRMs). The hydrometeor profiles have a corresponding surface precipitation rate. The algorithm retrieves the hydrometeor profiles and associated surface rainfall using a Bayesian approach that gives the estimated expected values. The ability of CRMs to produce cloud structures that are reliable and representative of observed storms is crucial for the success of GPROF. The cloud mycrophysics are one of the keys to achieving this. In addition, CRMs have been a very useful tool for GPM-algorithm developers through Cloud-Radiation Simulations (CRS), one of the nine GPM disciplinary research themes. This paper will discuss how to generate consistent and comprehensive 4D cloud datasets from an improved (i.e., in regard to bulk and multi-moment microphysics) CRM for TRMM and GPM rainfall retrieval algorithm developers. These cloud datasets include CRM-simulated clouds and cloud systems from different geographic locations in the tropics and midlatitudes. By linking the CRM with a passive microwave radiative-transfer model and using satellite and airborne data, the performance of the "cloud physics" can be assessed and in turn modified and improved. This paper will also address how to assess and improve the performance of various latent and diabatic heating algorithms and develop an algorithm to retrieve the vertical structure of apparent moistening (Q2). Considering that the GPM will produce high (temporal and spatial) resolution heating and rainfall data, these algorithms will be used to obtain the temporal and spatial distributions of surface rainfall and the associated vertical heating and moistening profiles throughout the subtropical and midlatitudes.

Tao, Wei-Kuo↗
DOE OSTI2021

EHS Health Assessment & Health Action Plan Report (CY 2020)

Sandia National Laboratories (SNL) Employee Health Services (EHS) program believes that good health is essential to getting the most out of life, which is why we offer a variety of worksite wellness programs that put employees in control of their own health. These programs are based on current research and strategies that are proven to minimize risk and decrease the impact of illness through early detection and treatment. Services includes Health Assessments, the Virgin Pulse (VP) online wellness platform, and Health Action Plans (HAP) which include one-on-one education, organizational health initiatives, a video library, an events calendar, onsite fitness facilities, and group fitness classes. Participation in these programs help employees and their spouses earn funding for their Health Reimbursement Accounts (HRAs). The EHS Health Action Plan (HAP) initiative targets the key health risks identified through the 8-15-80 model by engaging employees to change their own healthcare story. EHS identified the most prevalent of the health risks amongst our population through Health Risk Assessment (HRA) and used that data to build Health Action Plans (HAPs). The 2020 Health Action Plans addressed improving upon inadequate sleep, lack of energy, stress, weight, physical inactivity, cardiometabolic issues (hypertension, high cholesterol, diabetes), low back pain, allergies, asthma, digestive health, tobacco use, and living well to maintaining low risk for those individuals who do not have a chronic condition to manage. These plans connect employees with our onsite registered dietitians, fitness professionals, health coaches, physical therapists, and physicians as appropriate. In addition to addressing the physical aspects of health, the plans also emphasized pre/post-assessments to encourage building behavioral and emotional skills that promote health and facilitate lifestyle changes over a minimum of three months. Just one risk reduction or behavior change can make an impact on the health of the participant’s Division as well as Sandia’s overall risk levels and ultimately its healthcare costs. Sandia employees achieved an Overall Wellness Score of 69 based on the WellSource Health Assessment (the same as last year). A score of 70-100 is considered “Doing Well”, and a score of 40-69 is in the “Caution” category. Overall in CY 2019, Sandia saw a 34% participation rate in Health Action Plan (HAP) programs (up from 33% in CY 2019) with an 89% completion rate (4% lower than CY 2019). Overall, 5,039 (347 more than CY 2019) individuals participated in 8,329 HAPs, which is 1,005 more than the last calendar year (7,324).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Measurement of the W-boson mass and width with the ATLAS detector using proton–proton collisions at $\sqrt{s}=7$ TeV

Proton-proton collision data recorded by the ATLAS detector in 2011, at a centre-of-mass energy of 7 TeV, have been used for an improved determination of the W-boson mass and a first measurement of the W-boson width at the LHC. Recent fits to the proton parton distribution functions are incorporated in the measurement procedure and an improved statistical method is used to increase the measurement precision. The measurement of the W-boson mass yields a value of m w = 80,366.5 ± 9.8 (stat.) ± 12.5 (syst.) MeV = 80,366.5 ± 15.9 MeV, and the width is measured as Γ w = 2202 ± 32 (stat.) ± 34 (syst.) MeV = 2202 ± 47 MeV. The first uncertainty components are statistical and the second correspond to the experimental and physics-modelling systematic uncertainties. Both results are consistent with the expectation from fits to electroweak precision data. The present measurement of m w is compatible with and supersedes the previous measurement performed using the same data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Enriched immersed boundary method (EIBM) for interface-coupled multi-physics and applications to convective conjugate heat transfer

It is challenging to develop numerical methods that simultaneously maintain accuracy of resolving boundary conditions and mesh flexibility to handle the interface in interface-coupled multi-physics problems involving large property discontinuity. On the one hand, boundary-fitted methods possess high accuracy in capturing the interfacial phenomenon but involve complicated volumetric mesh generation, mesh-motion, and even re-meshing procedures. On the other hand, immersed boundary methods (IBM) provide mesh flexibility but sometimes suffer from inferior interface representations, leading to poor enforcement of boundary conditions. This paper presents an enriched immersed boundary method (EIBM) to overcome this challenge and demonstrates its efficacy in conjugate heat transfer, a representative example in interface-coupled multi-physics systems that have implications for many industrial processes. Further, the core technique of the method is to enhance IBM’s accuracy of the fluid–solid interface by enriching the degrees of freedom of the cut elements to enforce temperature and flux compatibilities and resolve all the physical unknowns on the background mesh to simplify the volumetric mesh generation. We implement the EIBM under the framework of a variational multiscale formulation for coupled Navier–Stokes and thermodynamics equations. The enriched DoFs enable better enforcement of temperature and flux compatibilities with large conductivity ratios across the fluid–solid interface. At the same time, the immersed nature of the proposed method still attains mesh flexibility. The EIBM’s accuracy is thoroughly evaluated through a set of examples, ranging from benchmark problems with analytical solutions to real-world cooling processes of a moving metallic structure with complex geometry.

42 ENGINEERING↗
DOE OSTI2022

New oscillation and scattering constraints on the tau row matrix elements without assuming unitarity

The tau neutrino is the least well measured particle in the Standard Model. Most notably, the tau neutrino row of the lepton mixing matrix is quite poorly constrained when unitarity is not assumed. In this paper, we identify data sets involving tau neutrinos that improve our understanding of the tau neutrino part of the mixing matrix, in particular ν ${\tau}$ appearance in atmospheric neutrinos. We present new results on the elements of the tau row leveraging existing constraints on the electron and muon rows for the cases of unitarity violation, with and without kinematically accessible steriles. We also show the expected sensitivity due to upcoming experiments and demonstrate that the tau neutrino row precision may be comparable to the muon neutrino row in a careful combined fit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Mixture Model for Refrigerant Pairs R-32/1234yf, R-32/1234ze(E), R-1234ze(E)/227ea, R-1234yf/152a, and R-125/1234yf

In this work, thermodynamic models based on the corresponding states framework with departure terms are developed for the refrigerant pairs R-32/1234yf, R-32/1234ze(E), R-1234ze(E)/227ea, R-1234yf/152a, and R-125/1234yf. These models are based on new measurements of density, speed of sound, and phase equilibria, combined with the data available in the literature. The model for R-32/1234yf is most comprehensive in its data coverage, with speed of sound deviations within 1%, density deviations within 0.1%, and bubble- and dew-point pressure deviations within 1%. In conclusion, the other mixtures have generally more limited data availability but a similar goodness of fit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

3-flavour results with NOvA

The NOvA collaboration has presented the 3-flavour oscillation results using a frequentist approach before. In this contribution, we present the results obtained with a bayesian approach. The conclusions with respect to the frequentist approach are unchanged, that is, the upper octant of $\theta_{23}$ is preferred, $\delta_\text{CP}=\frac{3\pi}{2}$ is not preferred at the $2\sigma$ level with normal ordering and $\delta_\text{CP}=\frac{\pi}{2}$ excluded at $3\sigma$ with inverted ordering. As a novelty of the bayesian analysis, the results obtained when $\theta_{13}$ is left as a free parameter in the fit are also.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗