Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The impact of cold electrons and cold ions in magnetospheric physics

A review of the impact of the cold-ion and cold-electron populations in the Earth’s magnetosphere is presented in this paper. The cold populations are defined by total energy less than approximately 100 eV, i.e. in the energy range which is strongly affected by spacecraft charging and that often dominates the total plasma density. We also include the warm plasma cloak in the review, since it overlaps partially with the cold energy range and is a population that is still not well understood. The known impacts of cold ions and cold electrons that are discussed are: the source of magnetospheric plasma, solar-wind/magnetosphere coupling, magnetotail reconnection and substorms, Kelvin-Helmholtz instabilities at the magnetopause, chorus, hiss, electromagnetic-ion-cyclotron and ultra-low-frequency wave-particle interactions, aurora structuring and spacecraft charging. Other possible impacts are associated with refilling on open-drift trajectories, the remnant layer and plasmapause disruption. A discussion of the difficulty of cold-plasma measurements and the need for new measurement techniques that measure the full cold-ion and cold-electron distribution functions is also presented. There remain a lot of unknowns about the cold-ion and cold-electron populations, associated with their origin, properties, drivers and impacts. These populations will need to be fully understood before the magnetosphere-ionosphere system can be fully understood.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Open-Air Manufacturing of Efficient Large-Area Perovskite Solar Cells to Meet Stability and Cost Targets

This SETO-funded project (DE-EE0009516) developed a fully open-air manufacturing pathway for perovskite solar cells and modules, eliminating vacuum-based processing steps while improving device stability. Open-air ultrasonic spray deposition, solution combustion synthesis, rapid thermal processing, and atmospheric plasma curing were developed and optimized for all functional device layers — perovskite absorber, hole transport layers (HTLs), electron transport layers (ETLs), transparent conducting oxides (TCOs), and rear electrodes — without reliance on vacuum. Sprayed organic ETLs preserved perovskite crystal structure and enabled power conversion efficiencies exceeding 20%, and open-air processed TCOs and rear electrodes achieved optoelectronic performance comparable to sputtered alternatives at substantially lower manufacturing cost. Device stability was assessed through accelerated aging protocols aligned with IEC and ISOS standards, combined with high-throughput optical diagnostics that identified key degradation mechanisms and antagonistic interactions among heat, humidity, and illumination stressors. A comprehensive technoeconomic analysis quantified the cost and throughput advantages of open-air manufacturing over conventional vacuum-based processes, identifying vacuum deposition as the dominant cost driver and demonstrating a clear pathway toward the $0.02/kWh target. The project produced five peer-reviewed journal publications, eleven conference presentations, two patents/applications, and five Ph.D. dissertations.

14 SOLAR ENERGY↗
DOE OSTI2023

Non-ideal MHD growth of current interchange tearing modes at plasma edge and response to externally-imposed flow

Current interchange tearing modes (CITMs) have been proposed to explain an intermittent eruption of electric current toward a divertor at an edge region of a tokamak device. Extended magnetohydrodynamic (MHD) simulations combined with the Scrape-Off-Layer diffusion model, which has been developed by the authors [Miura et al., Phys. Plasmas 24, 092111 (2017)], are carried out in order to study the growth of a CITM under influences of two-fluid and gyro-viscous effects, or non-ideal MHD effects. Numerical simulations both with and without an externally imposed azimuthal flow show that the growth of a CITM is observed for a relatively small flow velocity, and that a CITM can be a candidate mechanism for the intermittent eruption of the current in a tokamak, whether the growth is under influences of non-ideal MHD effects or not. Here, the growth can be suppressed when an externally imposed azimuthal flow is sufficiently large to cause a finite radial displacement because such a displacement prevents a transition from an interchange to a tearing mode that is the key process of a CITM. Furthermore, it is also found that a stripe pattern similar to so-called streamers is formed in the course of the CITM growth. The basic nature of this streamer-like structure is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Divertor characterization and access to dissipative divertor conditions in negative triangularity discharges in DIII-D

Reduced radial transport, short midplane-to-target parallel connection lengths, and a strong effect of cross-field drifts were responsible for the high densities required for detachment in strong negative triangularity (NT) configurations in DIII-D. Dissipative divertor conditions were achieved in NT discharges at different triangularity, injected power, plasma current, and toroidal field direction. Differences between negative and positive triangularity (PT) discharges are analyzed in this paper to understand the requirements for access to detached divertor conditions: power balance, geometry, radial transport and effect of cross-field particle drifts. Parametric dependencies of access to detachment on plasma current and power flowing into the scrape-off layer remained similar in negative and PT and impurity seeding was observed to reduce the density needed to detach by up to 30% at the expense of core impurity dilution. The impact of triangularity on core-edge integration was tested varying bottom triangularity at fixed top triangularity. The high density needed to detach was not intrinsic to the NT edge as shapes with positive lower triangularity and negative upper triangularity were able to detach at lower upstream densities while maintaining an ELM-free NT edge. Confinement degradation at deeper detachment levels was however observed in all NT shapes, often associated with radiation instabilities.

detachment↗
DOE OSTI2020

Analytic investigation of combined effects of anisotropic thermal transport and energetic particles on stability of resistive plasma resistive wall mode

The combined effects of anisotropic thermal transport and trapped energetic particles (EPs) on the stability of the resistive plasma resistive wall mode (RPRWM) are investigated by an energy-principle based analytical model. The results qualitatively confirm that of a recent toroidal modeling study [Bai et al., Phys. Plasmas 27, 072502 (2020)], in which the thermal transport can stabilize the RPPWM depending on the parameters of both the plasma equilibrium and energetic particles. The analytical model predicts a complete stabilization of the RPRWM in highly resistive plasmas, at sufficiently high EPs’ pressure, and finite plasma flow. The stabilizing effect of thermal transport originates from its enhancement of energy dissipations associated with both the resistive layer and the trapped energetic particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Overview of density pedestal structure: Role fueling versus transport

How much of the density pedestal structure profile is determined by fueling versus transport is still a valid question. In most current tokamaks, the Scrape-Off Layer is not opaque enough to screen the neutrals and limit their penetration past the separatrix. As such recycled neutrals as well as additional gas puffing can directly affect the pedestal structure through ionization. Yet, in ITER and other future burning plasma magnetic confinement devices, this ionization source will be pushed further out into the Scrape-Off Layer. This poses the question, how much of the pedestal density structure is governed by this edge ionization source versus plasma transport effects. Theoretically, several turbulent modes have been identified which could provide a 'pinch' like up-gradient transport mechanism. Up-gradient transport is necessary in a source-free region to obtain a peaked density profile, which is often observed in the core of tokamaks. In an opaque Scrape-Off Layer, without the existence of such a pinch, the pedestal density structure would eventually disappear. Not only would this limit our ability to fuel a fusion reactor, it would also affect the pedestal stability. In this paper we will give an overview of the state of the art on what sets the pedestal density structure based on experimental observations as well as theoretical models. We will complement these studies with new results from Alcator C-Mod and DIII-D where the opaqueness is increased to reach values similar to those in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Enhancing the efficiency benefit of thermal barrier coatings for homogeneous charge compression ignition engines through application of a low-k oxide

Prior experiments reported by the authors have proven the hypothesis that achieving a dynamic temperature swing on the combustion chamber surface will lead to improved thermal and combustion efficiencies of the homogeneous charge compression ignition engine. A thin layer of yttria-stabilized zirconia, roughly 150 μm, was plasma sprayed on the piston top. It led to markedly advanced ignition and heat release in the gasoline homogeneous charge compression ignition engine, accompanied with reduced unburnt hydrocarbon and carbon monoxide emissions, improved combustion efficiency, and a higher thermal efficiency. A related computational study highlighted the critical role of coating thermal conductivity in achieving a desired dynamic response; hence, the second phase of experimental investigations focused on introducing structured porosity in the yttria-stabilized zirconia coating, as a means of reducing effective conductivity. Indeed, additional incremental improvements were observed, as well as limitations related to adverse effects of the surface roughness and the fuel interactions with the surface roughness and open pores. Erosion can also be a problem in a direct injection engine. Therefore, the third round of investigations focused on a material with a natively low conductivity (low-k), sprayed on the top of an Al piston in a relatively dense form, and in a way that yields a smooth surface. The objective was to capitalize on the low conductivity, while avoiding the pitfalls accompanying high-porosity formulations. The heat-storage capacity was limited by keeping the thickness relatively low. The results verify the paramount importance of thermal conductivity in the context of high “temperature swing” behavior and indicate a potential to improve the homogeneous charge compression ignition engine’s combustion efficiency roughly 1.5%, with the overall indicated efficiency improvement on the order of 5%, on a relative basis. In addition, the low-k oxide thermal barrier applied to the piston extended significantly the low-load homogeneous charge compression ignition operability limit.

42 ENGINEERING↗
DOE OSTI2021

Integrated TBC/EBC for SiC Fiber Reinforced SiC Matrix Composites for Next Generation Gas Turbines (Final Report)

In this ambitious project, a significant challenge preventing widespread use of ceramic matrix composites in hot section components of gas power generating turbines was addressed. Hot section components made from SiC fiber reinforced SiC matrix composites (SiC/SiC composites), have the potential to achieve a combined cycle energy efficiency of above 65%. To achieve this efficiency, the temperature of the combustion gases on the turbine component surface is expected to reach as high as ~1700ºC (3100ºF). However, SiC/SiC composites suffer from volatilization at high temperature under high velocity steam environment – typical in a turbine hot chamber. This integrated collaborative project, between two research groups at Clemson University and a team of engineers and scientists at GE Gas Power, focused on design, fabrication and evaluation of a new graded environmental barrier coating. Using the excellent compositional tailorability of polymer derived ceramics (PDCs), we developed an integrated EBC/BC that smoothly transitions from bottom SiC/SiC bond interface to hermetic sesquioxide (Y 2 O 3 ) top surface. This smooth compositional transition avoided the sharp CTE mismatch at interfaces to greatly reduce the thermal stress. The developed EBC is compatible with and bonds well with the bond coat that GE uses. The top hermetic oxide surface ensures low oxygen transportation and volatilization rates under the high velocity steam environment. The graded microstructure with increasing sesquioxide concentration also decreases the amount of Si and C elements near the top hermetic sesquioxide layer. Coatings made using a process suitable for manufacturing – atmospheric plasma spraying was demonstrated. The microstructure of coatings made using this process were fully characterized. Finally, the performance of these coatings was investigated under the most demanding conditions for this application. Specifically, high temperature, high velocity steam exposure; thermal shock test; and thermal cycling tests. The graded coatings performed exceptionally well in all these tests. Specific suggestions for future development in this area have also been identified. In addition to the excellent technical progress, this project helped initiate a robust collaboration between the research groups at Clemson and GE Gas Power. It also provided a high-quality learning and mentoring opportunity for the three post-doctoral research associates and two UG students at Clemson University who worked on this project. All proposed tasks, sub-tasks were completed, and all milestones achieved.

03 NATURAL GAS↗
DOE OSTI2020

Plasma Facing Component Characterization and Correlation With Plasma Conditions in Lithium Tokamak Experiment-β

Lithium coatings in the Lithium Tokamak eXperiment (LTX) led to flat temperature profiles. The flat temperature profiles were observed along with a hot, low density edge, implying a broad, collisionless scrape-off layer (SOL). Additionally, in vacuo X-ray photoelectron spectroscopy (XPS) measurements established that lithium coatings evaporatively deposited onto high-Z plasma facing components (PFCs) became oxidized while retaining the ability to achieve good plasma performance long after lithium was applied to the PFCs. Longstanding theory predicted flat temperature profiles with low recycling walls, which was presumed to be due to hydrogen binding with elemental lithium to form lithium hydride. The presence of oxidized lithium, however, raised questions regarding the exact mechanism of hydrogen retention in LTX. To investigate these questions, the upgraded facility LTX- β includes a new sample exposure probe (SEP) for more detailed in vacuo analysis of PFC samples. The SEP is equipped with a vacuum suitcase capable of transporting samples representative of the LTX- β outer midplane PFCs to a stand-alone XPS system while maintaining pressures lower than the LTX- β base vacuum to limit the contamination between sample exposure and analysis. The low-energy resolution XPS system used in past experiments could only enable the determination of elemental percentages on the PFC sample surfaces. Because the new XPS system has higher energy resolution, it is more direct to assign chemical compounds to the measured binding energies. This capability has been confirmed by comparing XPS data from PFC test samples with measurements using a commercial high-resolution XPS system. Quartz crystal microbalances (QCMs) were used to quantify the thickness of the deposited lithium on the LTX- β PFCs. This article describes the application of the SEP to characterize the PFC surfaces using XPS and their relationship to plasma conditions.

Maan, Anurag↗
DOE OSTI2022

Probing atomic physics at ultrahigh pressure using laser-driven implosions

Abstract Spectroscopic measurements of dense plasmas at billions of atmospheres provide tests to our fundamental understanding of how matter behaves at extreme conditions. Developing reliable atomic physics models at these conditions, benchmarked by experimental data, is crucial to an improved understanding of radiation transport in both stars and inertial fusion targets. However, detailed spectroscopic measurements at these conditions are rare, and traditional collisional-radiative equilibrium models, based on isolated-atom calculations and ad hoc continuum lowering models, have proved questionable at and beyond solid density. Here we report time-integrated and time-resolved x-ray spectroscopy measurements at several billion atmospheres using laser-driven implosions of Cu-doped targets. We use the imploding shell and its hot core at stagnation to probe the spectral changes of Cu-doped witness layer. These measurements indicate the necessity and viability of modeling dense plasmas with self-consistent methods like density-functional theory, which impact the accuracy of radiation transport simulations used to describe stellar evolution and the design of inertial fusion targets.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Measurement of shock roughness due to phase plate speckle imprinting relevant for x-ray diffraction experiments on 3rd and 4th generation light sources

Laser-shock compression experiments at 3rd and 4th generation light sources generally employ phase plates, which are inserted into the beamline to achieve a repeatable intensity distribution at the focal plane. Here, the laser intensity profile is characterized by a high-contrast, high-frequency laser speckle. Without sufficient smoothing, these laser non-uniformities can translate to a significant pressure distribution within the sample layer and can affect data interpretation in x-ray diffraction experiments. Here, we use a combination of one- and two-dimensional velocity interferometry to directly measure the extent to which spatial frequencies within the laser focal spot intensity pattern are smoothed out during propagation within the laser plasma and a polyimide ablator. We find that the use of thicker polyimide layers results in spatially smoother shock fronts, with the greatest degree of smoothing associated with the highest spatial frequencies. Focal spots with the smallest initial speckle separation produce the most rapid smoothing. Laser systems that employ smoothing by spectral dispersion techniques to rapidly modulate the focal plane intensity distribution are shown to be the most effective ones in producing a spatially smooth shock front. We show that a simple transport model combined with the known polyimide Hugoniot adequately describes the extent of shock smoothness as a function of polyimide thickness. Finally, our results provide a description of spatial structure smoothing across a shock front, which can be used to design targets on x-ray free electron laser facilities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Effect of a Cr-rich surface layer on D retention in various RAFM steels

In this work, deuterium (D) retention is compared between various reduced-activation ferritic/martensitic steels, including CLF-1, Eurofer, F82H, and Rusfer, exposed to pure D plasma (ion flux ~1.5–2 × 10 21 m -2 s -1 , fluence, ϕ D , ~1 × 10 25 m -2 , sample temperature ~373 K, and incident ion energy ~100 eV). It is found that there is a large difference (up to ~30x) in the D retention between CLF-1 and F82H even with the same plasma exposure condition and similar nominal composition. The ϕ D dependence of the D retention exhibits a peculiar, counterintuitive feature: the D retention decreases with an increase in ϕ D from 2 × 10 23 m -2 to 1 × 10 25 m -2 . Surface analyses reveal that a Cr-rich surface layer is formed during outgassing at 773 K for 1 h before plasma exposure, and that there exists a clear correlation between the D retention and the Cr content in the surface layer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of magnetic geometry on the energy partition between ions and electrons in the scrape-off layer of magnetic fusion devices

A universal energy partition mechanism between ions and electrons has been confirmed to exist in the scrape-off layer of both the WEST tokamak and the W7-X stellarator. A peaked plasma density structure induced by an infinite magnetic connection length structure is observed to destroy this dependence and enhance the local ion and electron temperature ratio in the stellarator. Here, a theoretical analysis reveals that the ratio of ion and electron parallel heat conduction is predominant in determining this universality, while electrons would further be cooled in the density-peaked region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Illuminating White Dwarf Spectra through Laboratory Experiments at Cosmic Conditions

We establish the work on white dwarf stars in the larger context of the experiments of the Wootton Center for Astrophysical Plasma Properties (WCAPP); these experiments are conducted at the plasma conditions found in the cosmos, without the need for scaling. We briefly summarize the results of these experiments to-date and their astrophysical and physical import, before focusing on the white dwarf experiments. Over 97% of stars either are, or will become, white dwarf stars, giving them broad relevance. We describe the astrophysical and physical problems associated with white dwarf photospheres, the plasma where the observed light arises. Here, the astrophysical questions include the age of the universe, the age and history of star formation in our Galaxy's varied morphological components and the evolution of stars. The compact nature of these ubiquitous stars means that the atomic physics is not well constrained even in the outermost layers. Further, it suggests that many important processes, including crystallization in dense Coulomb plasma, occur and have a significant effect on the evolution and structure of these stars and thus all their many applications.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Collisional broadening of nonlinear resonant wave-particle interactions

A general procedure for understanding plasma behavior when resonant wave-particle interactions are the sole destabilizing and transport mechanism or only heating and/or current drive source is highlighted without recourse to involved numerical or analytical treatments. These phenomena are characterized by transport that appears to be collisionless even though collisions play a central role in narrow collisional boundary layers. The order of magnitude estimates, which include nonlinear effects, are shown to provide expressions in agreement with the principle results of recent toroidal Alfvén eigenmode (TAE), toroidal magnetic field ripple, and heating and current drive treatments. More importantly, the retention of nonlinearities leads to new estimates of the alpha particle energy diffusivity at saturation for TAE modes, and the ripple threshold at which superbanana plateau evaluations of alpha particle transport are modified by nonlinear radial drift effects. In addition, the estimates indicate when quasilinear descriptions for heating and current drive will begin to fail. The phenomenological procedure demonstrates that in magnetic fusion relevant plasmas narrow collisional boundary layers must be retained for resonant wave-particle interactions as they enhance the role of collisions, and make stochastic particle motion unlikely to be more important than other nonlinear process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Parametric dependencies of resonant layer responses across linear, two-fluid, drift-MHD regimes

Non-axisymmetric magnetic fields arising in a tokamak either by external or internal perturbations can induce complex non-ideal MHD responses in their resonant surfaces while remaining ideally evolved elsewhere. This layer response can be characterized in a linear regime by a single parameter called the inner-layer Δ, which enables outer-layer matching and the prediction of torque balance to non-linear island regimes. In this work, we follow strictly one of the most comprehensive analytic treatments including two-fluid and drift MHD effects and keep the fidelity of the formulation by incorporating the numerical method based on the Riccati transformation when quantifying the inner-layer Δ. The proposed scheme reproduces not only the predicted responses in essentially all asymptotic regimes but also with continuous transitions as well as improved accuracies. In particular, the Δ variations across the inertial regimes with viscous or semi-collisional effects have been further resolved, in comparison with additional analytic solutions. The results imply greater shielding of the electromagnetic torque at the layer than what would be expected by earlier work when the viscous or semi-collisional effects can compete against the inertial effects, and also due to the intermediate regulation by kinetic Alfvén wave resonances as rotation slows down. These are important features that can alter the non-axisymmetric plasma responses including the field penetration by external fields or island seeding process in rotating tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Fast imaging of laser ablation of cerium: Dependence of plasma plume dynamics and structure on native oxide growth

We have imaged the evolution of plasma following nanosecond pulsed laser ablation of cerium in air with sub-10 ns resolution. We find the ablated plasma plume expansion and shape to be strongly dependent on the time after mechanical polishing of the sample surface. After an initial shock front common to both new and aged samples (velocities up to 16 km s ₋1 ), we observe a second front that is relatively localized to the surface vicinity of newly polished samples, but in the case of older samples it moves outward at velocities of up to 4 km s ₋1 . We attribute this behavior to the formation and growth of a native oxide layer on the order of hours after polishing. These results demonstrate that plasma imaging can be used to diagnose the presence of, and evaluate the extent of, thin surface oxides or other compounds that form soon after exposure to some atmosphere. These findings also highlight the need to explicitly consider the presence of such overlayers when modeling laser/metal interaction, when making measurements of vapor phase chemistry, and when analyzing the composition, phase, and morphology of solid particulates formed after the ablation of reactive metals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Detecting shearless phase-space transport barriers in global gyrokinetic turbulence simulations with test particle map models

In magnetically confined fusion plasmas, the role played by zonal 𝐸 x 𝐵 flow shear layers in the suppression of turbulent transport is relatively well understood. However, less is understood about the role played by the weak shear regions that arise in the non-monotonic radial electric field profiles often associated with these shear layers. In electrostatic simulations from the global total-𝑓 gyrokinetic particle-in-cell code XGC, we demonstrate how shearless regions with non-zero flow curvature form zonal ‘jets’ that, in conjunction with neighbouring regions of shear, can act as robust barriers to particle transport and turbulence spreading. By isolating quasi-coherent fluctuations radially localised to the zonal jets, we construct a map model for the Lagrangian dynamics of gyrokinetic test particles in the presence of drift waves. We identify the presence of shearless invariant tori in this model and verify that these tori act as partial phase-space transport barriers in the simulations. We also demonstrate how avalanches impinging on these shearless tori cause eddy detachment events that form ‘cold/warm core ring’ structures analogous to those found in oceanic jets, facilitating transport across the barriers without destroying them completely. We discuss how shearless tori may generically arise from tertiary instabilities or other types of discrete eigenmodes, suggesting their potential relevance to broader classes of turbulent fluctuations.

fusion plasma↗