Search NASA⌕ Search

SEARCH · Search NASA

Results for “POSITIONING EQUIPMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Aerodynamic characteristics of a vectored-thrust V/STOL fighter in the transition speed range

A wind-tunnel investigation was conducted with a vectored-thrust V/STOL fighter configuration. The model was equipped with two nacelle-mounted vectored-thrust jet simulators and one lift-jet simulator. The vectored-thrust jet could be tested at two alternate longitudinal positions and three nozzle deflection angles. The vectored-thrust configuration with the rear nozzles showed an increase in lift and a decrease in pitching moment when compared with the forward nozzles. The rear nozzles also improve stall characteristics.

Mineck, R. E.↗
NASA NTRS1975

Wind estimates from cloud motions: Preliminary results from phases 1, 2, and 3 of an in situ aircraft verification experiment

Low level aircraft equipped with Inertial Navigation Systems (INS) were used to define the vertical extent and horizontal motion of a cloud and to measure the ambient wind field. A high level aircraft, also equipped with an INS, took photographs to describe the horizontal extent of the cloud field and to measure cloud motion. The aerial photographs were also used to make a positive identification in a satellite picture of the cloud observed by the low level aircraft. The experiment was conducted over the tropical oceans in the vicinity of Florida, Puerto Rico, Panama and in the Western Gulf of Mexico. Results for tropical cumulus clouds indicate excellent agreement between the cloud motion and the wind at the cloud base. The magnitude of the vector difference between the cloud motion and the cloud base wind is less than 1.3 m/sec for 67% of the cases with track lengths of 1 hour or longer. The cirrus cloud motions agreed best with the mean wind in the cloud layer with a vector difference of about 1.6 m/sec.

Hasler, A. F.↗
NASA NTRS1991

Particulate impacts on the UHCRE cosmic ray experiment teflon covers: The ESA programme

The optical scanning equipment at the University of Kent Unit for Space Science consists of a 102.5 by 42.5 cm computer controlled motorized stage which has a reproduction accuracy of 30 microns over the entire area. This is used with an optical microscope connected to two charge coupled device video cameras which can be used to obtain stereo color images of any features found. A coordinate system can be defined on each cover by means of two or more reference marks which allow a feature to be located using different equipment such as a scanning electron microscope, providing two known marks can be found. By using back illumination, penetrating features can be found automatically, and their sizes, circularity, and positions logged for later revisiting either on the optical system or using a scanning electron microscope.

Mcdonnell, J. A. M.↗
NASA NTRS1990

Electrical power system WP-04

Viewgraphs on Space Station Freedom Electrical Power System (EPS) WP-40 are presented. Topics covered include: key EPS technical requirements; photovoltaic power module systems; solar array assembly; blanket containment box and box positioning subassemblies; solar cell; bypass diode assembly; Kapton with atomic oxygen resistant coating; sequential shunt unit; gimbal assembly; energy storage subsystem; thermal control subsystem; direct current switching unit; integrated equipment assembly; PV cargo element; PMAD system; and PMC and AC architecture.

Nored, Donald L.↗
NASA NTRS1995

Automated Facility For Cleaning Large Flex Hoses

Technicians no longer exposed to hazardous cleaning materials. Proposed computer-controlled facility cleans bellow-type expansion joints and large flex hoses. Major portions of automated cleaning facility contained in clean room. One piece of equipment in clean room tower in which hose or expansion joint to be cleaned hoisted by hydraulic machinery and hung vertically. Once hose or expansion joint hung in required position, technician initiates programmed cleaning procedure from console on computer monitoring system. Procedure includes degreasing, cleaning with detergents, rinsing, pickling, and passivating operations. After cleaning completed, technician removes hose or expansion joint from tower and wraps open ends to prevent recontamination of interior.

Landry, Louis E.↗
NASA NTRS1976

Breast Cancer Detection

NASA's Jet Propulsion Laboratory has come up with a technique to decrease exposure to harmful x-rays in mammographies or breast radiography. Usually, physicians make more than one exposure to arrive at an x-ray film of acceptable density. Now the same solar cells used to convert sunlight into electricity on space satellites can make a single exposure sufficient. When solar cell sensor is positioned directly beneath x-ray film, it can determine exactly when film has received sufficient radiation and has been exposed to optimum density. At that point associated electronic equipment sends signal to cut off x-ray source. Reduction of mammography to single exposures not only reduced x-ray hazard significantly, but doubled the number of patient examinations handled by one machine. The NASA laboratory used this control system at the Huntington Memorial Hospital with overwhelming success.

Source record↗
NASA NTRS1943

Antispin-Tail-Parachute Installations

Although antispin tail parachutes have been used successfully in spin demonstrations for some time, very little published information is available concerning the size of parachute, the bridle-line length, and the type and location of pack to use for particular airplane. The present paper is an attempt to supply data relating to these factors. The paper is in two parts. The first part reviews the principles of operation of the antispin parachutes, views the principles of operation of the antispin parachutes, summarized available information on actual installations, and discusses parachute loads and pack locations. The second part of the paper reports on systematic tests in the NACA-15-foot and 20-foot free-spinning tunnels at the Langley memorial Aeronautical Laboratory to determine the minimum size and the optimum bridle-line lengths for antispin tail parachutes for current military airplanes. It is concluded that airplanes weighing between 7500 and 14,000 pounds require parachutes 8 feet in diameter and bridle-line lengths between 20 and 50 feet. A positive-ejection mechanism is desirable to throw the parachute clear of the tail and to assure rapid opening. The pack and attachment point must be so located that the equipment will not foul the tail surfaces.

Seidman, Oscar↗
NASA NTRS2014

Orion Crew Module / Service Module Structural Weight and Center of Gravity Simulator and Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing

An Orion Crew Module Service Module Structural Weight and Center of Gravity Simulator and a Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing were designed during a summer 2014 internship in Kennedy Space Centers Structures and Mechanisms Design Branch. The simulator is a structure that supports ballast, which will be integrated into an existing Orion mock-up to simulate the mass properties of the Exploration Mission-1 flight vehicle in both fueled and unfueled states. The simulator mimics these configurations through the use of approximately 40,000 lbf of steel and water ballast, and a steel support structure. Draining four water tanks, which house the water ballast, transitions the simulator from the fueled to unfueled mass properties. The Ground Systems Development and Operations organization will utilize the simulator to verify and validate equipment used to maneuver and transport the Orion spacecraft in its fueled and unfueled configurations. The second design comprises a cantilevered tripod hoist structure that provides the capability to position a large Orion Service Module Umbilical in proximity to the Vehicle Motion Simulator. The Ground Systems Development and Operations organization will utilize the Vehicle Motion Simulator, with the hoist structure attached, to test the Orion Service Module Umbilical for proper operation prior to installation on the Mobile Launcher. Overall, these two designs provide NASA engineers viable concepts worthy of fabricating and placing into service to prepare for the launch of Orion in 2017.

VMS↗
NASA NTRS2019

Using GPS Receiver 1PPS Output to Verify Time Stamp Accuracy and Measure Propagation Delay

A simple pulse overlay circuit using a logic OR gate was developed to overlay a precise leading edge 1 pulse per second time reference marker from a global positioning system receiver onto a non-return -to- zero-level pulse code modulation telemetry data stream to validate time stamp accuracy and measure propagation delay in telemetry equipment.

time stamp offset↗
NASA NTRS1976

Satellites for distress alerting and locating: Report by Interagency Committee for Search and Rescue Ad Hoc Working Group

The background behind the congressional legislation that led to the requirement for the Emergency Locator Transmitter (ELT) and the Emergency Position-Indicating Radio Beacon (EPIRB) to be installed on certain types of aircraft and inspected marine vessels respectively is discussed. The DAL problem is discussed for existing ELT and EPIRB equipped aircraft and ships. It is recognized that the DAL requirement for CONUS and Alaska and the maritime regions are not identical. In order to address the serious DAL problem which currently exists in CONUS and Alaska, a low orbiting satellite system evolves as the most viable and cost effective alternative that satisfies the overall SAR system design requirements. A satellite system designed to meet the needs of the maritime regions could be either low orbiting or geostationary. The conclusions drawn from this report support the recommendation to proceed with the implementation of a SAR orbiting satellite system.

Ehrlich, E.↗
NASA NTRS1981

A Loran-C prototype navigation receiver for general aviation

Investigations have been conducted regarding the techniques required for Loran-C navigation with application to the general-aviation pilot. The goal has been to produce prototype equipment for flight evaluation which will provide enroute navigation in both latitude-longitude and rho-theta coordinates and to evaluate the nonprecision approach capabilities of such equipment. In connection with the considered project, a prototype Loran-C receiver has been flight-tested using a variety of flight paths, with and without simultaneous ground radar position data collection. Attention is given to a receiver overview, an antenna preamplifier/coupler, the Loran-C receiver RF processor, the tracking loop hardware, tracking loop programming, video output, the laboratory and flight evaluation, and work currently in progress.

Lilley, R. W.↗
NASA NTRS1982

Landsat-D, about to be reality

The space and ground segments of the Landsat-D thematic mapper (TM) for remote sensing of a 185 km swath with 30 m resolution are described. Scanning the full earth once every 16 days from its 705 km sunsynchronous orbit, Landsat-D will relay its data on the ku-band through the TDRSS satellite to a ground station. The X-band will also be used to transmit data directly to foreign and domestic ground stations; the S-band will be reserved for MSS data only. Landsat-D comprises the multimission modular spacecraft and the instrument module, which features the MSS and TM, a wideband communication subsystem, a solar array, and an L-band global positioning system. Three computers on the ground provide a high degree of automation for reception, storage, retrieval, back-up, and transmission of data and commands. Additionally, a van is equipped with transportable equipment, including an antenna. Procedures followed for image generation from the MSS and TM are detailed, noting storage at Goddard until dispersal of tapes under the direction of the EROS data center.

Aepli, T. C.↗
NASA NTRS1991

Anthropomorphic Remote Manipulator

Two-armed telerobot undergoing development manipulates objects with dexterity approaching that of human. Designed to be remotely operated by human. Operator wears harness with exoskeletonlike sleeves and gloves; remote manipulator follows operator's arm, hand, and finger movements and feeds back position and force information so operator has sense of manipulating object held by telerobot. Developed for use in outer space. Suited for such terrestrial uses as handling materials and maintaining equipment in hazardous environments where mechanical dexterity and nearly instantaneous feedback of sensory information needed.

Jau, Bruno M.↗
NASA NTRS2018

Sensor Data Quality and Angular Rate Down-Selection Algorithms on SLS EM-1

The NASA Space Launch System Block 1 launch vehicle is equipped with an Inertial Navigation System (INS) and multiple Rate Gyro Assemblies (RGA) that are used in the Guidance, Navigation, and Control (GN&C) algorithms. The INS provides the inertial position, velocity, and attitude of the vehicle along with both angular rate and specific force measurements. Additionally, multiple sets of co-located rate gyros supply angular rate data. The collection of angular rate data, taken along the launch vehicle, is used to separate out vehicle motion from flexible body dynamics. Since the system architecture uses redundant sensors, the capability was developed to evaluate the health (or validity) of the independent measurements. A suite of Sensor Data Quality (SDQ) algorithms is responsible for assessing the angular rate data from the redundant sensors. When failures are detected, SDQ will take the appropriate action and disqualify or remove faulted sensors from forward processing. Additionally, the SDQ algorithms contain logic for down-selecting the angular rate data used by the GNC software from the set of healthy measurements. This paper explores the trades and analyses that were performed in selecting a set of robust fault-detection algorithms included in the GN&C flight software. These trades included both an assessment of hardware-provided health and status data as well as an evaluation of different algorithms based on time-to-detection, type of failures detected, and probability of detecting false positives. We then provide an overview of the algorithms used for both fault-detection and measurement down selection. We next discuss the role of trajectory design, flexible-body models, and vehicle response to off-nominal conditions in setting the detection thresholds. Lastly, we present lessons learned from software integration and hardware-in-the-loop testing.

Park, Thomas↗
NASA NTRS2018

Sensor Data Quality and Angular Rate Down-Selection Algorithms on SLS EM-1

The NASA Space Launch System Block 1 launch vehicle is equipped with an Inertial Navigation System (INS) and multiple Rate Gyro Assemblies (RGA) that are used in the Guidance, Navigation, and Control (GN&C) algorithms. The INS provides the inertial position, velocity, and attitude of the vehicle along with both angular rate and specific force measurements. Additionally, multiple sets of co-located rate gyros supply angular rate data. The collection of angular rate data, taken along the launch vehicle, is used to separate out vehicle motion from flexible body dynamics. Since the system architecture uses redundant sensors, the capability was developed to evaluate the health (or validity) of the independent measurements. A suite of Sensor Data Quality (SDQ) algorithms is responsible for assessing the angular rate data from the redundant sensors. When failures are detected, SDQ will take the appropriate action and disqualify or remove faulted sensors from forward processing. Additionally, the SDQ algorithms contain logic for down-selecting the angular rate data used by the GN&C software from the set of healthy measurements. This paper provides an overview of the algorithms used for both fault-detection and measurement down selection.

Park, Thomas↗
NASA NTRS2000

Human versus automation in responding to failures: an expected-value analysis

A simple analytical criterion is provided for deciding whether a human or automation is best for a failure detection task. The method is based on expected-value decision theory in much the same way as is signal detection. It requires specification of the probabilities of misses (false negatives) and false alarms (false positives) for both human and automation being considered, as well as factors independent of the choice--namely, costs and benefits of incorrect and correct decisions as well as the prior probability of failure. The method can also serve as a basis for comparing different modes of automation. Some limiting cases of application are discussed, as are some decision criteria other than expected value. Actual or potential applications include the design and evaluation of any system in which either humans or automation are being considered.

NASA Discipline Space Human Factors↗
NASA NTRSDate not supplied

We Are All Potential Role Models: How We Can Support Scientist Engagement with Youth and the General Public

We all have the opportunity to be positive STEM role models. Yet scientists rarely identify themselves as a possible role model. In the training, “Empowering Effective STEM Role Models,” scientists practice research based strategies for engaging youth, particularly girls. This type of training is complementary to science communication, but is focused on equipping scientists with the skills needed to successfully encourage youth to pursue STEM careers. This training has been provided to over 150 STEM professionals at NASA and 14 federal agencies participated in a Train-the-Trainer version, organized by the White House Council for Women and Girls in STEM Working Group. Participants in this training reported that learning and practicing how to connect with and inspire children in STEM made them more confident stepping into further engagement opportunities. Confident, inspiring scientists are a highlight of a successful engagement event, but other factors make a positive experience possible.It’s important that all partners are thoughtful and intentional in preparing for public engagement events. The logistics are crucial, especially now while many engagements have moved to virtual platforms. Additional technology considerations make preparation essential. Two examples of virtual engagement highlight the support provided that led to successful engagements. The GLOBE Mission Earth project engages scientists in virtual classroom visits. To ensure both teacher and scientist expectations are met, a coordinator facilitates up front preparation by providing slide templates for the scientist to customize and providing video and other resources to the teacher and students to prompt student questions. Another example leverages the power of social media, particularly NASA Facebook. The NASA Earth Science Education Collaborative organizes citizen science challenges and engages the public on social. For one event, scientists were asked to share their connection to the investigation, but without access to NASA’s video production studio, the plans shifted. Scientists prepared audio files instead of videos and collaborated with communications leads to help craft their message. This weekly series has been flexible, adjusting to scientist's comfort levels, and has resulted in fresh and creative engagement.

Jessica Elaine Taylor↗