Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSURE EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Predicted and measured effects of pressure and crossflow velocity on composite propellant burning rate

A theoretical model for prediction of burning rates of composite (ammonium perchlorate oxidizer) solid propellants as a function of pressure and crossflow velocity was developed. Included in this model is the capability for treatment of multimodal oxidizer particle sizes and metalized formulations. In addition, an experimental device for measuring the effects of crossflow velocity on propellant burning rate was developed and used to characterize a series of AP/HTPB propellants with systematically varied formulation parameters. Model predictions of zero-crossflow burning rate versus pressure characteristics were found to be in agreement with data, while the agreement between erosive burning predictions and data is, in general, good. The experimental data indicate that the dominant factor influencing the sensitivity of composite propellant burning rate to crossflow is the base (no-crossflow) burning rate versus pressure characteristics of the propellant (lower base burning rate leading to increased crossflow sensitivity). Finally, the model was used to examine the effects of motor scaling on erosive burning: erosive burning is predicted to diminish with increasing motor size, in agreement with experience.

King, M. K.↗

Use of Adaptive Injection Strategies to Increase the Full Load Limit of RCCI Operation

Dual-fuel combustion using port-injection of low reactivity fuel combined with direct injection (DI) of a higher reactivity fuel, otherwise known as reactivity controlled compression ignition (RCCI), has been shown as a method to achieve low-temperature combustion with moderate peak pressure rise rates, low engine-out soot and NO x emissions, and high indicated thermal efficiency. A key requirement for extending to high-load operation is moderating the reactivity of the premixed charge prior to the diesel injection. One way to accomplish this is to use a very low reactivity fuel such as natural gas. In this work, experimental testing was conducted on a 13 l multicylinder heavy-duty diesel engine modified to operate using RCCI combustion with port injection of natural gas and DI of diesel fuel. Engine testing was conducted at an engine speed of 1200 rpm over a wide variety of loads and injection conditions. The impact on dual-fuel engine performance and emissions with respect to varying the fuel injection parameters is quantified within this study. The injection strategies used in the work were found to affect the combustion process in similar ways to both conventional diesel combustion (CDC) and RCCI combustion for phasing control and emissions performance. As the load is increased, the port fuel injection (PFI) quantity was reduced to keep peak cylinder pressure (PCP) and maximum pressure rise rate (MPRR) under the imposed limits. Overall, the peak load using the new injection strategy was shown to reach 22 bar brake mean effective pressure (BMEP) with a peak brake thermal efficiency (BTE) of 47.6%.

Hanson, Reed↗

Effect of pressure gradients on Gortler instability

Gortler instability for boundary-layer flows over generally curved walls is considered. The full linearized disturbance equations are obtained in an orthogonal curvilinear coordinate system. A perturbation procedure to account for second-order effects is used to determine the effects of the displacement thickness and the variation of the streamline curvature on the neutral stability of the Blasius flow. The pressure gradient in the mean flow is accounted for by solving the nonsimilar boundary-layer equations. Growth rates are obtained for the actual mean flow and the Falkner-Skan flows. The results demonstrate the strong influence of the pressure gradient and the nonsimilarity of the basic flow on the stability characteristics.

Ragab, S. A.↗

The effect of pressure and excitation energy on the isotopic fractionation in the formation of ozone by discharge of O2

Isotopic fractionation processes in the formation of O3 by discharge (at 20 kV and 3 MHz) of O2 in a fused silica container at 77 K are investigated experimentally, with a focus on the effects of changes in the isotopic abundances in the predischarge O2, the O2 pressure, and the excitation energy on the isotope abundances in the postdischarge O2 and O3. The results are presented in extensive tables and graphs and characterized in detail, and good general agreement is found with data obtained using 60-kHz excitation (Yang and Epstein, 1987). It is shown that O-17 and O-18 enrichment of the residual O2 (when the predischarge gas is enriched) or of the O3 (when atmospheric isotope abundances are used) can occur independently of one another. It is inferred that the rate of anharmonic predissociation of vibrationally hot O3 depends on the symmetry and mass of the O3 molecules. The significance of the present findings for studies of anomalous oxygen isotope abundances in meteorites is indicated.

Yang, Jongmann↗

Effect of sweep angle on the pressure distributions and effectiveness of the ogee tip in diffusing a line vortex

Low-speed wind tunnel tests were conducted to study the influence of sweep angle on the pressure distributions of an ogee-tip configuration with relation to the effectiveness of the ogee tip in diffusing a line vortex. In addition to the pressure data, performance and flow-visualization data were obtained in the wind tunnel tests to evaluate the application of the ogee tip to aircraft configurations. The effect of sweep angle on the performance characteristics of a conventional-tip model, having equivalent planform area, was also investigated for comparison with the ogee-tip configuration. Results of the investigation generally indicate that sweep angle has little effect on the characteristics of the ogee in diffusing a line vortex.

Balcerak, J. C.↗

Investigation of Diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines

A comprehensive investigation was carried out in order to better understand the combustion behaviour in a low compression ratio DI Diesel engine when multiple injection strategies are applied just after the engine cold starts in low temperature conditions (idling). More specifically, the aim of this study was twofold: on one hand, to understand the effect of the multiple injection strategies on the indicated mean effective pressure; on the other hand, to contribute to the understanding of combustion stability characterized by the coefficient of variation of indicated mean effective pressure. The first objective was fulfilled by analyzing the rate of heat release obtained by in-cylinder pressure diagnosis. The results showed that the timing of the pilot injection closest to the main injection was the most influential parameter based on the behaviour of the rate of heat release (regardless of the multiple injection strategy applied). For the second objective, the combustion stability was found to be correlated with the combustion centroid angle. The results showed a trend between them and the existence of a range of centroid angles where the combustion stability is strong enough. In addition, it was also evident that convenient split injection allows shifting the centroid to such a zone and improves combustion stability after start. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Effect of pressure on electrostatic processes on Mars

Paschen's Law as illustrated by Paschen curves for various gases shows that the minimum breakdown voltage for gases for breakdown distances of interest, i.e., 1 to 1000 mm is at or near the surface pressure on Mars. This means that the physics of many electrostatic processes is markedly different on Mars than on Earth. The primary effect is that voltage potentials above 100 volts are subject to breakdown in the Martian atmosphere. Sharp electrodes, dusty atmospheric conditions, or other anomalies modify the breakdown voltage, usually causing lower breakdown voltages. Paschen's curves for most common pure gases were experimentally determined. A very small amount of mixing of different gases radically changes the curve as shown in the curve for neon plus 0.1 percent argon compared to either neon or argon. Paschen's curve for the exact composition of gases for Mars was not determined; thus, the breakdown voltages are not known. A second important effect is that the breakdown for most Martian cases is a glow discharge rather than a spark discharge. It would seem that simple measurements of breakdown manner and voltage should be included on a Mars lander vehicle.

Leach, Rodman N.↗

Drift Instabilities in Thin Current Sheets Using a Two–Fluid Model With Pressure Tensor Effects

The integration of kinetic effects in fluid models is important for global simulations of the Earth's magnetosphere. We use a two–fluid 10–moment model, which includes the pressure tensor and has been used to study reconnection, to study the drift kink and lower hybrid drift instabilities. Using a nonlocal linear eigenmode analysis, we find that for the kink mode, the 10–moment model shows good agreement with kinetic calculations with the same closure model used in reconnection simulations, while the electromagnetic and electrostatic lower hybrid instabilities require modeling the effects of the ion resonance using a Landau fluid closure. As a result, comparisons with kinetic simulations and the implications of the results for global magnetospheric simulations are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Pressure-induced phase coexistence in BaFe{sub 1.8}Co{sub 0.2}As{sub 2}

We report high-pressure powder synchrotron X-ray diffraction measurements of overdoped BaFe{sub 1.8}Co{sub 0.2}As{sub 2} under quasi-hydrostatic pressure up to 40.1 GPa. Our results indicate that a tetragonal (T) to collapsed tetragonal (CT) phase transition occurs at 16.8 GPa and the two phase coexist until 30 GPa, which has not been previously observed in iron arsenide compounds. Both the lattice parameters a and c show discontinuous change for the T and CT phases. The decrease of the c lattice parameter is as large as 12.2% owing to the uniaxial pressure effect. The axial ratio c/a of the T phase exhibits similar features to the other 122-type compounds below 16.8 GPa, whereas there is a very small increase with increasing pressure in the two phase coexistence region. Because of the relationship between the axial ratio and superconductivity, the abnormal expansion may be related to the sudden increase of the strength of antiferromagnetic spin fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Axion as a Cold Dark Matter Candidate: Proof to Fully Nonlinear Order

We present proof of the axion as a cold dark matter (CDM) candidate to the fully nonlinear order perturbations based on Einstein’s gravity. We consider the axion as a coherently oscillating massive classical scalar field without interaction. We present the fully nonlinear and exact, except for ignoring the transverse-tracefree tensor-type perturbation, hydrodynamic equations for an axion fluid in Einstein’s gravity. We show that the axion has the characteristic pressure and anisotropic stress; the latter starts to appear from the second-order perturbation. But these terms do not directly affect the hydrodynamic equations in our axion treatment. Instead, what behaves as the effective pressure term in relativistic hydrodynamic equations is the perturbed lapse function and the relativistic result coincides exactly with the one known in the previous non-relativistic studies. The effective pressure term leads to a Jeans scale that is of the solar-system scale for conventional axion mass. As the fully nonlinear and relativistic hydrodynamic equations for an axion fluid coincide exactly with the ones of a zero-pressure fluid in the super-Jeans scale, we have proved the CDM nature of such an axion in that scale.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of pressure on heterocyclic compounds: Pyrimidine and s-triazine

We have examined the high-pressure behaviors of six-membered heterocyclic compounds of pyrimidine and s-triazine up to 26 and 26.5 GPa, respectively. Pyrimidine crystallizes in Pna2{sub 1} symmetry (phase I) with the freezing pressure of 0.3 GPa, and transforms to another phase (phase II) at 1.1 GPa. Raman spectra of several compression-decompression cycles demonstrate there is a critical pressure of 15.5 GPa for pyrimidine. Pyrimidine returns back to its original liquid state as long as the highest pressure is below 15.1 GPa. Rupture of the aromatic ring is observed once pressure exceeds 15.5 GPa during a compression-decompression cycle, evidenced by the amorphous characteristics of the recovered sample. As for s-triazine, the phase transition from R-3c to C2/c is well reproduced at 0.6 GPa, in comparison with previous Raman data. Detailed Raman scattering experiments corroborate the critical pressure for s-triazine may locate at 14.5 GPa. That is, the compression is reversible below 14.3 GPa, whereas chemical reaction with ring opening is detected when the final pressure is above 14.5 GPa. During compression, the complete amorphization pressure for pyrimidine and s-triazine is identified as 22.4 and 15.2 GPa, respectively, based on disappearance of Raman lattice modes. Synchrotron X-ray diffraction patterns and Fourier transform infrared spectra of recovered samples indicate the products in two cases comprise of extended nitrogen-rich amorphous hydrogenated carbon (a-C:H:N)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis and Comparison of Surface Roughness Effects on Pressure Data from SLS Wind Tunnel Test

Unsteady flows are becoming a more characterized field of study as advancements in technology is allowing for more high-speed, time-resolved data acquisition. It is important to understand these flows as the shock-wave boundary-layer interactions and separation they are involved with can generate extreme loads caused by high pressure and temperature on the body of a flight vehicle. It is vital to characterize these loads, as they can impede upon the structural integrity of a high-speed system. A common instrument utilized today to characterize pressure distributions caused by unsteady flows are unsteady pressure transducers. Set flush with the surface of a flight vehicle or wind tunnel model, these transducers can provide a pressure distribution, capturing the frequency of unsteady loads that could impinge upon the test article. A couple negative aspects of this instrumentation is that they are expensive, have long lead times, and a pressure distribution can only be determined in one discrete location where the transducer is installed. An optical diagnostic known as unsteady pressure-sensitive paint (uPSP) can help to satisfy these deficiencies. This is a spray paint that can be applied to a surface of a model to provide a global pressure distribution across the whole painted region.2 A complete picture of the fluid dynamic pressures occurring on the surface of a test article can be analyzed, especially in locations where it may have been impossible to install a transducer. Pressure-sensitive paint is also less expensive than traditional pressure transducers, which are, on average, about $2,000 each including the cost of installation.3 Unsteady PSP will not replace unsteady pressure transducers, but the transducers can be used to validate the PSP response to the flow and measure frequencies higher than the frequency response of the paint. One issue that can arise using these tools simultaneously, is that the surface roughness of the uPSP can affect the pressure readings of the transducers. Applying the uPSP to the surface of the model is going to affect the flow in some way as the topography of the model is now different than if it was not painted. One study with steady PSP conducted by Amer, Obara, and Liu at NASA Langley concluded that the PSP surface roughness was minimally intrusive at different test conditions with various lift, drag, etc., however, it was noted that data from some pressure transducers had decreased, likely due to the uneven application of the PSP in the localized region of the transducers.9 Sugioka et. al. tested various formulations of uPSP to study surface roughness effects on a Common Research Model (CRM) in transonic flow. The influence of uPSP on the surface of the model, depending on how it was formulated, was noted to have the possibility of relocating the shock wave present in the flow. This study was conducted to examine and compare transducer data acquired in December 2017 of a 4% scale model of the Space Launch System (SLS) performed at NASA Ames Research Center (ARC) Unitary Plan Wind Tunnel (UPWT). One goal of the test was to demonstrate to the customer the potential of the uPSP system developed at NASA ARC. The effect of uPSP on transducer signals also became an interest in this experiment and is the reason for this data analysis. The results of this study were discussed with the SLS team to help them make decisions regarding the next test on an SLS model with the PSP and Unitary Plan Wind Tunnel teams.

pressure-sensitive paint↗

Effects of pressure, temperature, and hydrogen during graphene growth on SiC(0001) using propane-hydrogen chemical vapor deposition

Graphene growth from a propane flow in a hydrogen environment (propane-hydrogen chemical vapor deposition (CVD)) on SiC differentiates from other growth methods in that it offers the possibility to obtain various graphene structures on the Si-face depending on growth conditions. The different structures include the (6{radical}3 Multiplication-Sign 6{radical}3)-R30 Degree-Sign reconstruction of the graphene/SiC interface, which is commonly observed on the Si-face, but also the rotational disorder which is generally observed on the C-face. In this work, growth mechanisms leading to the formation of the different structures are studied and discussed. For that purpose, we have grown graphene on SiC(0001) (Si-face) using propane-hydrogen CVD at various pressure and temperature and studied these samples extensively by means of low energy electron diffraction and atomic force microscopy. Pressure and temperature conditions leading to the formation of the different structures are identified and plotted in a pressure-temperature diagram. This diagram, together with other characterizations (X-ray photoemission and scanning tunneling microscopy), is the basis of further discussions on the carbon supply mechanisms and on the kinetics effects. The entire work underlines the important role of hydrogen during growth and its effects on the final graphene structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wall interference calculation in a transonic test section including simulation of discrete slots

A computational simulation of a transonic wind tunnel test section with longitudinally slotted walls is described. This nonlinear slot model includes dynamic-pressure effects and a plenum pressure constraint. The simulation method developed is found to be a useful tool for analyzing the nature of the flowfield that exists in a longitudinally slotted transonic test section. Results obtained from the discrete-slot model are similar to those of a homogeneous model when a plenum pressure coefficient of zero is utilized, indicating little effect of slot discreteness with the transport aircraft models examined.

Al-Saadi, Jassim A.↗

Pressure induced high spin-low spin transition in FeSe superconductor studied by x-ray emission spectroscopy and ab initio calculations

FeSe is a simple binary system in the iron based superconducting family and exhibits a significant pressure induced increase in the superconducting transition temperature (T{sub c}). In addition to pressure effect, spin fluctuations, magnetic ordering, and crystal structure all play vital roles in altering T{sub c}. Even though various experiments and theoretical simulations explain the connection among them and superconductivity, the interplay between these important parameters is still not clearly understood. Here, we report the pressure effect on the spin state of Fe in FeSe superconductor studied using synchrotron x-ray emission spectroscopy at ambient and low temperatures down to 8 K near T{sub c}. Pressure induced high spin to low spin transition was observed at both ambient and low temperatures with continuous suppression of Fe magnetic moments under increasing pressure. The spin transition is closely related to the pressure induced tetragonal to orthorhombic structural transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a CO 2 Chemical Sensor for Downhole CO 2 Monitoring in Carbon Sequestration

Geologic storage of carbon dioxide (CO 2 ) has been proposed as a viable means for reducing anthropogenic CO 2 emissions. The means for geological sequestration of CO 2 is injection of supercritical CO 2 underground, which requires the CO 2 to remain either supercritical, or in solution in the water/brine present in the underground formation. However, there are aspects of geologic sequestration that need further study, particularly in regards to safety. To date, none of the geologic sequestration locations have been tested for storage integrity under the changing stress conditions that apply to the sequestration of very large amounts of CO 2 . Establishing environmental safety and addressing public concerns require widespread monitoring of the process in the deep subsurface. In addition, studies of subsurface carbon sequestration such as flow simulations, models of underground reactions and transports require a comprehensive monitoring process to accurately characterize and understand the storage process. Real-time information about underground CO 2 movement and concentration change is highly helpful for: (1) better understanding the uncertainties present in CO 2 geologic storage; (2) improvement of simulation models; and (3) evaluation of the feasibility of geologic CO 2 storage. Current methods to monitor underground CO 2 storage include seismic, geoelectric, isotope and tracer methods, and fluid sampling analysis. However, these methods commonly resulted low resolution, high cost, and the inability to monitor continuously over the long time scales of the CO 2 storage process. A preferred way of monitoring in-situ underground CO 2 migration is to continuous measure CO 2 concentration change in brine during the carbon storage process. An approach to obtain the real time information on CO 2 concentration change in formation solution is highly demanded in carbon storage to understand the CO 2 migration subsurface and to answer the public safety problem. The objective of the study is to develop a downhole CO 2 sensor that can in-situ, continuously monitor CO 2 concentration change in deep saline. The sensor is a Severinghaus-type CO 2 sensor with small size, which renders it can be embedded in monitoring well casing or integrated with pressure/temperature transducers, enabling the development of “smart” wells. The studies included: (1) prepare and characterize metal-oxide electrodes. Test the electrodes response to pH change. Investigate different ions and brine concentration effects on the electrode’s performance. Study the stability of the electrode in brine solution; (2) fabricate a downhole CO 2 sensor with the metal-oxide electrodes prepared in the laboratory. Test the performance of the CO 2 sensor in brine solutions. Study high pressure effects on the performance of the sensor; (3) design and conduct CO 2 /brine coreflooding experiments with the CO2 sensor. Monitor CO 2 movement along the core and test the performance of the sensor in coreflooding tests. Develop a data acquisition system that can digitize the sensor’s output voltage. Our completed research has resulted in deep understanding of downhole CO 2 sensor development and CO 2 monitoring in CO 2 storage process. The developed downhole CO 2 sensor included a metal-oxide electrode, a gas-permeable membrane, a porous steel cup, and a bicarbonate-based internal electrolyte solution. Iridium oxide-based electrode was prepared and used for preparation the CO 2 sensor. The prepared iridium oxide-based electrode displayed a linearly response to pH change. Different factors such as different ions and ions concentration, temperature, and pressure effects on the electrode performance on pH response were investigated. The results indicated that the electrode exhibited a good performance even in high salt concentration of produced water. To improve the electrode performance under high pressure, IrO 2 nanoparticles with the particle size in the range of 1-2 nm were prepared and electrodeposited on stainless steel substrate by cyclic voltammetry. It was observed that the thin film of iridium oxide was formed on the substrate surface and such iridium oxide-based electrode displayed excellent performance under high pressure for longer term. A downhole CO 2 sensor with the iridium oxide-based electrode was prepared. The working principle of the CO 2 sensor is based on the measurement of the pH change of the internal electrolyte solution caused by the hydrolysis of CO 2 and then determination of the CO 2 concentration in water. The prepared downhole CO 2 sensor had the size of diameter of 0.7 in. and length of 1.5 in. The sensor was tested under the pressures of 500 psi, 2,000 psi, and 3,000 psi. A linear correlation was observed between the sensor potential change and dissolved CO 2 concentration in water. The response time of the CO 2 sensor was in the range of 60-100 minutes. Further tests indicated that the CO 2 sensor exhibited good reproducibility under high pressure. A CO 2 /brine coreflooding system was constructed to simulate the real-world CO 2 storage process. The prepared downhole CO 2 sensor was loaded in the system to monitor CO 2 movement during CO 2 /brine coreflooding test. The results indicated that the sensor could detect CO 2 movement in the tests. Further studies showed that the sensor could be recovered by brine flooding after CO 2 /brine flushed the core. The results of the coreflooding tests demonstrated that the sensor had potential application for CO 2 monitoring in carbon sequestration. A data acquisition system for the downhoe CO 2 sensor was developed and coded. The system converted the sensor output signal into digital data and transported the data from downhole to wellhead surface. The data acquisition system was tested and evaluated in the laboratory with the prepared sensor for data collection.

36 MATERIALS SCIENCE↗