Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPAGATION MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Tensile failure criteria for fiber composite materials

The analysis provides insight into the failure mechanics of these materials and defines criteria which serve as tools for preliminary design material selection and for material reliability assessment. The model incorporates both dispersed and propagation type failures and includes the influence of material heterogeneity. The important effects of localized matrix damage and post-failure matrix shear stress transfer are included in the treatment. The model is used to evaluate the influence of key parameters on the failure of several commonly used fiber-matrix systems. Analyses of three possible failure modes were developed. These modes are the fiber break propagation mode, the cumulative group fracture mode, and the weakest link mode. Application of the new model to composite material systems has indicated several results which require attention in the development of reliable structural composites. Prominent among these are the size effect and the influence of fiber strength variability.

Rosen, B. W.↗
NASA NTRS1993

A numerical study of wave propagation in a confined mixing layer by eigenfunction expansions

It is well known that the growth rate of instability waves of a two-dimensional free shear layer is reduced greatly at supersonic convective Mach numbers. In previous works, it has been shown that new wave modes exist when the shear layers are bounded by a channel due to the coupling effect between the acoustic wave modes and the motion of the mixing layer. The present work studies the simultaneous propagation of multiple stability waves using numerical simulation. It is shown here that the coexistence of two wave modes in the flow field can lead to an oscillatory growth of disturbance energy with each individual wave mode propagating linearly. This is particularly important when the growth rates of the unstable waves are small. It is also shown here that the propagation of two neutrally stable wave modes can lead to a stationary periodic structure of rms fluctuations. In the numerical simulations presented here the forced wave modes are propagating at same frequency, but with different phase velocities. In order to track the growth of each wave mode as it propagates downstream, a numerical method that can effectively detect and separate the contribution of the individual wave is given. It is demonstrated that by a least square fitting of the disturbance field with eigenfunctions the amplitude of each wave mode can be found. Satisfactory results as compared to linear theory are obtained.

Hu, Fang Q.↗
NASA NTRS1978

Small amplitude waves in a hot relativistic two-fluid plasma

The dispersion relation for small amplitude waves in a hot relativistic plasma embedded in a uniform magnetic field is derived. Four plasma modes exist for propagation oblique to the magnetic field, and the mode properties are summarized in a hot relativistic generalization of the cold plasma pond diagram of Stix (1962). The two-fluid approximation is considered, and two-fluid equations are applied in this procedure which summarizes properties of linear waves in an unbounded magnetized relativistic plasma by means of a parameter-space diagram of wave phase velocity.

Hyun, S.↗
NASA NTRS1986

Steepened magnetosonic waves in the high beta plasma surrounding Comet Giacobini-Zinner

Studies of intense hydromagnetic waves at Giacobini-Zinner are extended to investigate the mode and direction of wave propagation. Simultaneous high-resolution measurements of electron density fluctuations demonstrate that long period waves propagate in the magnetosonic mode. Principal axis analyses of the long period waves and accompanying partial rotations show that the sum of the wave phase rotations is 360 deg, indicating that both are parts of the same wave oscillation. The time sequence of the steepened waveforms observed by ICE shows that the waves must propagate towards the Sun with Cph less than Vsw. Observations are consistent with wave generation by resonant ion ring or ion beam instability which predicts right-hand polarized waves propagating in the ion beam (solar) direction. The large amplitudes and small scale sizes of the cometary waves suggest that rapid pitch-angle scattering and energy transfer with energetic ions should occur. Since the waves are highly compressive, first-order Fermi acceleration is forecast.

Tsurutani, B. T.↗
NASA NTRSDate not supplied

Development of a C-ELS Specimen-Based Numerical Benchmark for Mode II Delamination and Assessment of Two VCCT-Based Propagation Strategies

A finite element (FE) benchmark example inspired by the calibrated end-loaded split (C-ELS) specimen is developed and used to assess the performance of delamination propagation capabilities based on linear elastic fracture mechanics (LEFM). The C-ELS specimen has the advantage of a longer region of stable delamination propagation compared to the existing mode II benchmark case. The new benchmark example may therefore provide a better assessment tool by enabling more stable crack growth in regions further away from the boundary conditions or load application. First, a benchmark result is created manually using two-dimensional finite element models of the C-ELS specimen with different delamination lengths. Second, the performance of the virtual crack closure technique (VCCT) delamination propagation capabilities in the Abaqus/Standard®1 FE code and the recently developed Progressive Release eXplicit-VCCT (PRX-VCCT) method are assessed by comparing the results to the benchmark case. Two examples with different starter delamination lengths are studied. A shorter starter length is chosen to create a scenario with unstable delamination propagation. A longer delamination encourages stable delamination propagation. Detailed results from three-dimensional analyses with aligned and misaligned meshes and two levels of mesh refinement are provided. In general, good agreement can be achieved between the results obtained from the quasi-static propagation analysis and the benchmark analysis. Numerical artifacts including anomalous unreleased nodes in the crack wake and zig-zag crack fronts occur for propagation analyses using Abaqus/Standard VCCT. In comparison, continuous, smooth, delamination fronts are observed for PRX-VCCT. The use of the benchmark case to assess different VCCT-based propagation strategies illustrates the value of establishing benchmark cases.

Composite Materials↗
NASA NTRS1975

The propagation of plane waves and higher order acoustic modes in multisectioned ducts

A theoretical and experimental study of acoustic propagation in an anechoically terminated multisectioned duct was performed. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial as well as circumferential direction, was developed to generate plane waves and both spinning and non-spinning higher order modes. Measurement of attenuation and radial mode shapes were taken with various finite length liners inserted between the hard wall sections of a duct with an anechoic termination. A search technique was developed to find the complex eigenvalues for a liner under the assumption of a locally reacting boundary condition. The experimental results were compared with a theoretical analysis which includes the modal transmission and reflection at the interface of each duct section, and this indicated that the local reaction boundary condition is valid for three liner configurations.

Wyerman, B. R.↗
NASA NTRS1990

A kinematical/numerical analysis of rotor-stator interaction noise

In this study, the unsteady, thin-layer Navier-Stokes equations are solved using a system of patched grids for a rotor-stator configuration of an axial turbine. The study examines the plurality of spinning modes that are present in such an interaction. The propagation of these modes is analyzed and appropriate grid spacing chosen in the far upstream and downstream regions to attenuate reflections from the computational boundaries. In addition, radiating boundary conditions are implemented based on the farfield acoustical behavior of the flow field. Results in the form of pressure amplitudes and the spectra of turbine tones are presented. Numerical results and experimental data are compared wherever possible. The numerical results are also shown to conform with the predictions of a kinematical analysis of the flowfield.

Rangwalla, Akil A.↗
NASA NTRS1993

A numerical analysis of tonal acoustics in rotor-stator interactions

In this study, the unsteady, thin-layer, Navier-Stokes equations are solved using a system of patched grids for a rotor-stator configuration of an axial turbine. The study focuses on the plurality of spinning modes that are present in such an interaction. The propagation of these modes in the upstream and downstream regions is analyzed and compared with numerical results. It was found that the numerically calculated tonal acoustics could be affected by the type of numerical boundary conditions employed at the inlet and exit of the computational boundaries and the grid spacing in the upstream and downstream regions. Results in the form of surface pressure amplitudes and the spectra of turbine tones and their far field behavior are presented. Numerical results and experimental data are compared wherever possible. The 'mode-content' for different harmonics of blade-passage frequency is shown to conform with that predicted by a kinematical analysis.

Rangwalla, A. A.↗
NASA NTRS2006

Measurement of Spatial Filtering Capabilities of Single Mode Infrared Fibers

Spatial filtering is necessary to achieve deep nulls in optical interferometer and single mode infrared fibers can serve as spatial filters. The filtering function is based on the ability of these devices to perform the mode-cleaning function: only the component of the input field that is coupled to the single bound (fundamental) mode of the device propagates to the output without substantial loss. In practical fiber devices, there are leakage channels that cause light not coupled into the fundamental mode to propagate to the output. These include propagation through the fiber cladding and by means of a leaky mode. We propose a technique for measuring the magnitude of this leakage and apply it to infrared fibers made at the Naval Research Laboratory and at Tel Aviv University.

infrared↗
NASA NTRS2013

Further Development of Rotating Rake Mode Measurement Data Analysis

The Rotating Rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. After analysis of the measured data, the mode amplitudes and phases were quantified. For low-speed fans within axisymmetric ducts, mode power levels computed from rotating rake measured data would agree with the far-field power levels on a tone by tone basis. However, this agreement required that the sound from the noise sources within the duct propagated outward from the duct exit without reflection at the exit and previous studies suggested conditions could exist where significant reflections could occur. To directly measure the modes propagating in both directions within a duct, a second rake was mounted to the rotating system with an offset in both the axial and the azimuthal directions. The rotating rake data analysis technique was extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode levels at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode amplitudes for the modes propagating in both directions within the duct. The fit equations were also modified to allow evanescent mode amplitudes to be computed. This extension of the rotating rake data analysis technique was tested using simulated data, numerical code produced data, and preliminary in-duct measured data.

Dahl, Milo D.↗
NASA NTRS2014

Transient Convection Due to Imposed Heat Flux: Application to Liquid-Acquisition Devices

A model problem is considered that addresses the effect of heat load from an ambient laboratory environment on the temperature rise of liquid nitrogen inside an enclosure. This model has applications to liquid acquisition devices inside the cryogenic storage tanks used to transport vapor-free propellant to the main engine. We show that heat loads from Q = 0.001 to 10 W, with corresponding Rayleigh numbers from Ra = 109 to 1013, yield a range of unsteady convective states and temperature rise in the liquid. The results show that Q = 1 to 10 W (Ra = 1012 to 1013) yield temperature distributions along the enclosure height that are similar in trend to experimental measurements. Unsteady convection, which shows selfsimilarity in its planforms, is predicted for the range of heat-load conditions. The onset of convection occurs from a free-convection-dominated base flow that becomes unstable against convective instability generated at the bottom of the enclosure while the top of the enclosure is convectively stable. A number of modes are generated with small-scale thermals at the bottom of the enclosure in which the flow selforganizes into two symmetric modes prior to the onset of the propagation of the instability. These symmetric vertical modes transition to asymmetric modes that propagate as a traveling-wave-type motion of convective modes and are representative of the asymptotic convective state of the flow field. Intense vorticity production is created in the core of the flow field due to the fact that there is shear instability between the vertical and horizontal modes. For the higher Rayleigh numbers, 1012 to 1013, there is a transition from a stationary to a nonstationary response time signal of the flow and temperature fields with a mean value that increases with time over various time bands and regions of the enclosure.

Duval, Walter M. B.↗
NASA NTRS1993

A multiple-mode three-dimensional model of VLF propagation in the earth-ionosphere waveguide in the presence of localized D region disturbances

Transient localized D region disturbances, such as those associated with lightning discharges, affect the characteristics of VLF waves propagating in the Earth-ionosphere waveguide. In particular, both phase and amplitude changes in the subionospheric signal can be observed at receiving sites as a result of the wave scattering that takes place in the disturbed region. In the present paper we present a multiple-mode three-dimensional model of VLF propagation in the Earth-ionosphere waveguide in the presence of localized D region disturbances. The model takes into account great circle (GC) propagation paths with realistic ground and ionospheric conductivity changes that result in mode conversion along the path. It is assumed that conductivity changes transverse to the GC paths are negligible except in the vicinity of the D region disturbance and that mode coupling is negligible within the disturbed region. This new model is applied to experimental observations and is found to be in general agreement. The diagnostics potential of the model for characterizing energetic particle precipitation events is discussed.

Poulsen, William L.↗
NASA NTRS1976

Diurnal tide in the Martian atmosphere

Classical atmospheric tidal theory is extended to include the effects of large-amplitude planetary-scale variations of the terrain height. Utilizing simple models of the thermotidal forcing, the resulting technique is used to compute the diurnal tide in both the dust-free and the dust-laden Martian atmosphere. The main effect of the Martian variable terrain is to drive topographic tidal modes which can propagate vertically and to excite the possibly resonant diurnal Kelvin mode. The resulting surface wind can exceed 20 m/sec and may determine the preferred location for the initiation of global dust storms. In the middle Martian atmosphere (30-80 km) static and shear instabilities embedded within the tidal fields will generate extensive, though variable, regions of turbulence. Vertical mixing by this turbulence and transport by the tide itself may help to stabilize the middle Martian atmosphere against photolysis.

Zurek, R. W.↗
NASA NTRS2003

An evaluation of the use of new Doppler methods for detecting longitudinal function abnormalities in a pacing-induced heart failure model

BACKGROUND: Doppler tissue echocardiography and color M-mode Doppler flow propagation velocity have proven useful in evaluating cross-sections of patients with left ventricular (LV) dysfunction, but experience with serial changes is limited. Purpose and methods: We tested their use by evaluating the temporal changes of LV function in a pacing-induced congestive heart failure model. Rapid ventricular pacing was initiated and maintained in 20 dogs for 4 weeks. Echocardiography was performed at baseline and weekly during brief pacing cessation. RESULTS: With rapid pacing, LV volume significantly increased and ejection fraction (57%-28%), stroke volume (37-18 mL), and mitral annulus systolic velocity (16.1-6.6 cm/s) by Doppler tissue echocardiography significantly decreased, with ejection fraction and mitral annulus systolic velocity closely correlated (r = 0.706, P <.0001). In contrast to the mitral inflow velocities, mitral annulus early diastolic velocity decreased steadily (12.3-7.3 cm/s) resulting in a dramatic decrease in mitral annulus early/late (1.22-0.57) diastolic velocity with no tendency toward pseudonormalization. The color M-mode Doppler flow propagation velocity also showed significant steady decrease (57-24 cm/s) throughout the pacing period. Multiple regression analysis chose mitral annulus systolic velocity (r = 0.895, P <.0001) and propagation velocity (r = 0.782, P <.0001) for the most important factor predicting LV systolic and diastolic function, respectively. CONCLUSIONS: Doppler tissue echocardiography and color M-mode Doppler flow could evaluate the serial deterioration in LV dysfunction throughout the pacing period. These were more useful in quantifying progressive LV dysfunction than conventional ehocardiographic techniques, and were probably relatively independent of preload. These techniques could be suitable for longitudinal evaluation in addition to the cross-sectional study.

Evaluation Studies↗
NASA NTRS2018

Dual Rotating Rake Measurements of Higher-Order Duct Modes: Validation Using Experimental and Numerical Data

A rotating rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. After analysis of the measured data, the mode coefficient amplitudes and phases were quantified. Early studies using this system found that mode power levels computed from rotating rake measured data would agree with the far-field power levels. However, this agreement required that the sound from the noise sources within the duct propagated outward from the duct exit without reflection and previous studies suggested conditions could exist where significant reflections could occur. This paper shows that mounting a second rake to the rotating system, with an offset in both the axial and the azimuthal directions, measures the data necessary to determine the modes propagating in both directions within a duct. The rotating rake data analysis technique was extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode coefficients at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode coefficients for the modes propagating in both directions within the duct while accounting for the presence of evanescent modes. The validation of the dual-rotating-rake measurements was conducted using data from a combination of experiments and numerical calculations to compute reflection coefficients and other mode coefficient ratios. Compared to results from analytical and numerical computations, the results from dual-rotating-rake measured data followed the expected trends when frequency, mode number, and duct termination geometry were changed.

Validation↗
NASA NTRS1992

The structure of particle cloud premixed flames

The structure of premixed flames propagating in combustible systems containing uniformly distributed volatile fuel particles in an oxidizing gas mixture is analyzed. This analysis is motivated by experiments conducted at NASA Lewis Research Center on the structure of flames propagating in combustible mixtures of lycopodium particles and air. Several interesting modes of flame propagation were observed in these experiments depending on the number density and the initial size of the fuel particle. The experimental results show that steady flame propagation occurs even if the initial equivalence ratio of the combustible mixture based on the gaseous fuel available in the particles, phi sub u, is substantially larger than unity. A model is developed to explain these experimental observations. In the model, it is presumed that the fuel particles vaporize first to yield a gaseous fuel of known chemical composition which then reacts with oxygen in a one-step overall process. The activation energy of the chemical reaction is presumed to be large. The activation energy characterizing the kinetics of vaporization is also presumed to be large. The equations governing the structure of the flame were integrated numerically. It is shown that the interplay of vaporization kinetics and oxidation process can result in steady flame propagation in combustible mixtures where the value of phi sub u is substantially larger than unity. This prediction is in agreement with experimental observations.

Seshadri, K.↗
NASA NTRS1988

Electrostatic waves stimulated by coherent VLF signals propagating in and near the inner radiation belt

The excitation of electrostatic waves by whistler-mode VLF signals propagating along magnetic-field lines in and near the earth's inner radiation belt is examined on the basis of ISEE-1 observations obtained during July-December 1983. The data are presented in extensive graphs and characterized in detail. The effect is seen in about 60 percent of the ISEE-1 orbits penetrating the belt and for signals originating in both hemispheres, with an electrostatic-wave effective bandwidth roughly proportional to the local magnetic-field strength. These results are interpreted in terms of a theoretical model in which scattering of the VLF waves off magnetic-field-aligned plasma density irregularities is followed by particle pitch-angle scattering and precipitation in the radiation belt; the latter effect could then produce new irregularities via a feedback mechanism.

Bell, T. F.↗